Annexure I - Bank Of India

Document technical information

Format pdf
Size 63.7 kB
First found Nov 13, 2015

Document content analysis

Language
English
Type
not defined
Concepts
no text concepts found

Organizations

Places

Transcript

Annexure I
Detailed Specifications for Bill of Quantities,BOI,sagarpur,New Delhi.
S.No. Description of Item
Unit
1
Flooring
Providing & laying of 3' x 3' Vitrified Tile flooring of approved make & shade viz. Sft.
RAK (IMP-OFGY) / EURO (ATHENA)/ equivalent of same colour over necessary leveling screed o 1:4 cement mortar
(20mm thick) with proper slope wherever required includign poiting of the joints with white cement and matching
pigments, curing etc. completre in all respects (excluding Toilets and NOn-Customer areas)
Quantity
2200
2
12mm front glazing-toughned glassP/f Full height partition with 12mm thick toughened
glass,( Saint Gobain, Modi Guard.) complete, with patch fittings. Include cost of glass in this item and S.S.
Connectors[any number ]- glass to glass, glass to floor /ceiling cost to include in above mentioned item.Glass to be
toughned, polished and grinded properly.The item to be inclusive of proving, fixing and necessary wastage. Glass shall
be measured as per actual size.[ patch fitting, cost to be inclusive.
Brand of glass- Saint Gobain/ Modi Guard.
Sft.
234
3
Façade of Entrace Door- Providing and fixing in position Aluminium composite panel boxing with PVDF coating & LDPE Sft.
core lainated , and for shutter boxing.Eurobond/Altobond/Alukbond exterioe Grade 4 mm thick with composite of (0.5mm3mm-0.5mm) including fabrication for the same with aluminium sections, required hardware, silicon sealent (Dow
Corning 789) masking tape, necesary scaffolding etc.
150
4
Sft.
False Ceiling (Armstrong)
Providing & fixing in position false ceiling in Armstrong 600 x 600 mm x
15/16 mm Dune Supreme RH 99 Prima tile with Tegular edge framework as specified by Armstrong Co. with suspenders
wherever required. Making necessar ycutouts for diffusers and light fittings, taping and finishing to proper line & level,
incudign marking gooves and trap doors for A.C. u nit in 18mm thick M.R. Grade Plywood with Stainless Steel hinges &
locks with White Plastic Emulsion Paint etc. complete in all respects. (Note-Only teh plan area will be measured for
payment. No extra payment will be made for cutouts, goorves, moulding etc.)
1200
5
Sft.
False Ceiling (Gypsum Board)
Providing & fixing in position false ceiling in Gypboard 12 mm thick or
horizontals & verticals fixed over G.I. framework as specified by India Gypsm Co. Ltd. including trap doors for A.C. unit in
18 mm thick M.R. Grade Plywood with Stainless Steel hinges & locks with moulding 1"x1" for edges including finishing
with White Plastic Emulsion Paint etc. complete in all respects. (Note only the plan area will be measured for payment.
No extra payment will be made for cutouts, grooves, moulding etc.)
1115
6
Painting -Plastic emulsion
Providing & applying White Plastic Emulsion paint of Asian Sft.
Paints/ICI Dulux/Berger and Sporty Yellow-X104 shade of royal Luxury Emulsion of Asian Paints in minimum 2 coats
including scarpping opening of existing cracks, filling up of "V" cracks with expoxy expandable putty to required depths,
making goods weak plastered/unplastered surfaces with coement plaster wherever required item to include Plaster of
Paris, primer, palti & making good existing surface to receive new paint including cleaning on completion of painting work
etc. complete in all respects.
2000
7
POP. Providing and applying pop on walls and columns as per the requirement, and to give smooth surface as per
approval of Architect. Punning on walls with plaster of paris to required thickness[ thickness of POP =6MM] to mend
flaws , Alignment , angles , corners & edges , the existing ceiling tiles having holes in them be filled with POP, so as to
obtain a smooth finish. finished surface to be smooth and the item includes pads or scaffolding etc. complete in all
respect to the satisfaction of Architect / Engineer .
Sft.
2000
Rate (in Rs.)
Amount (Rs.)
8
Sft.
Paint- Synthetic enamel paint-Painting two or more coats with Synthetic Enamel Paint of approved brand and
manufacture to give an even shade including putty and priming coat . Surface to be sand paper cleaned and repaired
,on old & new work Etc, to be applied on grills and rolling shutter. complete in all respect to the satisfaction of Architect
/ Engineer.
500
9
Entrance Door
Providing and fixing Entrance Door (Fully glazed 12mm toughned glass
frameless] ,Toughned glass doors[ single/double shutter] without frame,moving on
double action hydrawlic heavy duty floor springs & pivot on top
including cutting, embedded the floor springs along with S.S.cover
plate etc., The item includes handle of 600mm long with complete
patch fittings ,door locks etc, complete to the satisfaction of Bank/
Architect . [ Fittings-Dorma/ Hettich/Ozone]
Sft.
24.5
10
Front Office Counter:
Providing and fixing in position Front office Counter 2'6" rft
wide as per drawing No. (1-A, 1-B, 1-C, 1-D & 15) comprising of the following complete in all
respects: (i) Working top made with 25mm tick plywood finsihed with 1mm thick laminate. Outside
edge of the working top shall be provided with 1 1/4" x 1" Teak Wood moulding finished with
melamine polish. Inside edge will be provided with 1/2" x 1" T.W. beading patti with melamine finish
(ii) Vertical facia (apron) made with 18mm thick plywood finished with 1mm thick laminate with 1mm
thick groove at the joint of laminates of two different shades. (iii) Vertical drop (horizontal band) shall
be provided on the facia below the working top made with 18mm thick plywood finished with 1mm
thick laminated with provision for concealed light, 1 mm thick groove shall be provided at the joint of
two different shades of laminate. (iv) Glazed partition above workiong top to be provided with 12mm
thick clear glass cut to the standard shape fixed to partition as per fixing details and to boxing with
concealed S.S. finished 'D' brackets as shown in the drawing. The exposed edges of the glass shall
be finished in mirror poliosh (v) 3'-10" high Boxing (10"x10") made with 18 mm thick plywood
finished with 1 mm thick laminate including providing and fixing 6mm thick square frosted glass at a
height 3'-2" above finished floor leve. (vi)1-9" high Boxing (5"x5") made with 12 mm thick plywood
finished with 1mm thick laminate. (vii) vertical supports made with 18 mm thick plywood finished with
white enamel paint. (viii) Telescopic CPU Stand/ready made Keyboard tray shall be provided of
approved modal and make. (ix) Footest made with T.W. member of size 4"x1 1/2" finished with
frrench polish. (x) Drawer units as per drawing shall be provided with multipurpose Godrej locks in
Each Drawer. Facia of drawer unit shall be finished with 1mm thick laminate and all otehr sides shall
be finished with white enamel paint. The drawers will be provided with handles (Stainless Steel
finish) and channels as per approved of the Project Consultant/Bank. (xi) Boxing as per drawing
made with 12mm thick plywood finished with Synthetic enamel paint shal be provided below the table
top for electricla conduiting and at the bottom for the LAN cabling/Telephone wire conduiting. The
item to include all necessary hardware and fittings in Stainless Steel finish, lipping to all edges and
making provision onloy for electrical fittings behind the front. Vertical drop and also in the 10"x10"
10
11
12
rft
Cash Counter :
Providing and fixing in position Cash Counter 2'-9" wide
comprising of the following: (i) Working top made with 25mm tick plywood finsihed with 1mm thick
laminate. Outside edge of the working top shall be provided with 1 1/4" x 1" Teak Wood moulding
finished with melamine polish. Inside edge will be provided with 1/2" x 1" T.W. beading patti with
melamine finish (ii) Vertical facia (apron) made with 18mm thick plywood finished with 1mm thick
laminate with 1mm thick groove at the joint of laminates of two different shades. (iii) Vertical drop
(horizontal band) shall be provided on the facia below the working top made with 18mm thick
plywood finished with 1mm thick laminated with provision for concealed light, 1 mm thick groove shall
be provided at the joint of two different shades of laminate. (iv) Glazed partition above working top to
be provided with 12mm thick clear toughened and frosted besides non-transparent film from inside
fixed to partiion as per fixing details and to boxing with concealed S.S. finished 'D' brackets as shown
in th drawing. The exposed edges of the glass shall be finished in mirror poliosh (v) Transaction top
shall be provided with 12 mm thick toughened glass (partly glzed partly frosted) fixed horizontally with
concealed Stainless Steel D bracket. Both exposed edges (inside and outside) shall be moulded and
finished in mirror polish. (vi)Glazed partition having height 1'o" above the transacton top (in facia)
shall be provided with 12 mm thick glass (clear) with cut out of 8"x4" as per drawing. Teh edges of
cut out and the top edge of glass are to be mirror polished and to be fixed to partition as per fixing
details and to boxing with concealed S.S. finished 'D' brackets as shown in glass (Clear) above the
slit to be fixed to partition as per fixing details and to boxing with concealed S.S. finished 'D' brackets
as shown in the drawing. The exposed edges shall be finished in mirror polish. (viii) 7'7" high Boxing
(10"x10"( made with 18mm thick plywood as per drawing with 1-6" horizontal extension at the top
incuding providing and fixing 6mm thick square frosted glass at a height of 5"-11" above Finished
Floor level. (ix) 1'-9" high boxing (5"x5") made with 12 mm thick plywood finished with 1 mm thick
laminate are to be provided. (x) Drawer units as per drawing shall be provided with multipurpose
Godrej locks in Each Drawer. Facia of drawer unit shall be finished with 1mm thick laminate and all
Sft.
Solid Full Height Partition
Providing & fixing in position solid Full Height
Partition in frame work including door ion 2'x2' and (horizontally and vertically) comprising of 2" x 1
1/2" T.W. Section with 6 mm thick plywood on both sides finished with 1 mm thick laminates of
approved make and colour as shown in drawing no. 17. Item to include 2"x 2" T.W. member for door
frame. All exposed T.W. surfaces to be finished in melamine polish of mathcing laminate colour as
directed including all necesary Stainless Steel finish fittings/hardware, door closer, Godrej locks and
wood preservative paint etc. as per list of approved material and as approved by teh Project
Consultant/Bank complete in all respects. (Note in case of false ceiling, teh vertical T.W. members to
be fixed with pucca ceiling but the area of partiton payabel will be below the false ceiling only.
10
55.25
14
Sft.
Partly Glzed Partition for Cash Cabins Providing and fixing in position 7'-7" high partly glazed
partition for Cash Cabins including door dawing no. (12) in frame worka at 2'x 2' grid (horizontally and
verticlaly) comprising of 2" x 1 1/2" T.W. Section and/or as per frame work shown in the drawings
with 6mm plywood on both sides finished with 1 mm thick laminated of approved shade and colour
as shown in drawings, item to include 8mm thick glass with etching and frosting as per design and
2"x2" T.W. member or door sides and glass sides and T.W. door frame to take 8mm thick glass with
etching and frosting. The door will be provided with T.W. louvers finished in melamine polish of
matching laminate colour. The doors are also to be provided with Godrej Night Latch. Two wooden
trays are also t be provided as per dawing. Necessary cutouts are to provided ionteh glass and the
edges of teh glass cutouts are to be finished in mirror polish. All exposed T.W. surfaces to be
finished in melamine polish of matching laiminate colour as directed including all necesary Stainless
Steel finish fittings / hardware, doors closers, Godrej locks and wood preservative paints etc. as per
list of approved material and as approved by the Project Consultant/Bank complete in all respects.
400
15
Sft.
Party Glazed Low height Partition
Providing and fixing in position partly glazed low Height
Partition (21/2" thick) in fram work with T.W. vertical members at 2' c/c and 3 horizontal mebers at
equal distance comprosing of 2" x 1 1/2" T.W. Section with 6mm plywood on both sides finished witih
1 mm thick laminates of approved make and shade . Item to include 12 mm thick glas (clear/frosted)
to be fixed as shown in drawing. The expose edgs of the glass to be finished in mirror polish. T.W.
runner should be melamine polish in matching colour of laminate etc. complete in all respects.
190
16]a Manager's Table- Providing and fixing in position Manager's Table of size 6'0" x 3'0" as per
NO
drawing no. (6)/office's Tab le of size 6'0"x3'0" as per drawing no. (5) inlcuding Side Storage
(Credenza) by using 25mm thick plywood for top and 18mm thick plywood for all otehr horizontal and
vertical members. Telescopic CPU Stand/ready made Keybord tray shall be provided of approved
model and make. Footrest made with T.W. member of size 4" x 1 1/2" finished with french polish.
Side Storage (Credenza) as pe drawing shall be provided Facia of Side Storage (Credenza) shall be
finished with 1mm thick laminates as shown in teh drawing and all otehr sides shall be finished with
white enamle paint. The Side Storage (Credenza) shall be provided with handles (Stainless steel
finish) and channels as per approved of all the Project Consultant / Bank. All exposed plywood
surfaces to be finished with 1mm thick laminate of approved make & shade, and all exposed edges
of table top & ply vertricals to have 1" x 1/4" T.W. lipping. All exposed T.W. sections to be melamined
and internal surfaces to have white enamel paint as directed. Item to inlcude plywood boxing, all
necesary hardware and fittings in Stainless Steel finish, lipping to all edges etc. complete in all
respects.
1
16]b Officer's Table Providing and fixing in position office's Tab le of size 5'0"x2'6" Side Storage
NO
(Credenza) by using 25mm thick plywood for top and 18mm thick plywood for all otehr horizontal and
vertical members. Telescopic CPU Stand/ready made Keybord tray shall be provided of approved
model and make. Footrest made with T.W. member of size 4" x 1 1/2" finished with french polish.
Side Storage (Credenza) as pe drawing shall be provided Facia of Side Storage (Credenza) shall be
finished with 1mm thick laminates as shown in teh drawing and all otehr sides shall be finished with
white enamle paint. The Side Storage (Credenza) shall be provided with handles (Stainless steel
finish) and channels as per approved of all the Project Consultant / Bank. All exposed plywood
surfaces to be finished with 1mm thick laminate of approved make & shade, and all exposed edges
of table top & ply vertricals to have 1" x 1/4" T.W. lipping. All exposed T.W. sections to be melamined
and internal surfaces to have white enamel paint as directed. Item to inlcude plywood boxing, all
necesary hardware and fittings in Stainless Steel finish, lipping to all edges etc. complete in all
respects.
5
17
Staff Table
Providing and fixing in position Staff Table fo size 4'6" x 2'6" by no
using 25mm thick plywood for top and 18mm thick plywood for all other horizontal and vertical
members. Telescopic CPU Stand/ready made Keyboard tray shall be provided. Drawer units as per
drawing shall be provided with multipurpose Godrej locks in each drawer. Facia of drawe runit shall
be finished with 1 mm thick laminate and all other sides shall be finished with white enamel paint.
The dawers will be provided with handles (Stainles Steel finish) and channels as per approved of the
Project Consultant / Bank. All exposed plywood surface to be finished with 1mm thk. laminate of
approved make & shade, and all exposed edges of tables top & ply vertical to ahve 1" x 1/4" T.W.
lipping. All exposed. T.W. sections to be melamined and internal surfaces to have whie enamel paint
as directed. The item to include plywood boxing, all necesary hardware and fittings in Stainles Steel
finish, lipping to all edges etc. complete in all respects.
2
18
Sft.
Full height Storage / Low Height Storage/Back Storage (Credenza) Providing and fixing in
position full height Storage/Low Height Storager / Back Storage (Credenza) as respectively using
Plywood of required thicknes finished with 1mm thick laminates as shown in teh drawing and all
otehr sides shall be finished with white enamel paint as detailed therein. The Storage Units shall be
provided with handle (Stainless Steel finish) as per approval of the Project Consultant / Bank. All
exposed plywood surface to be finished with 1mm thk. laminate of approved make & shade and all
exposed edges of plywood to have 1" x 1/4" T.W. lipping. All exposed T.W. sections to be melamined
in mathing colour laminated and internal surface to ahve white enamel paint as directed. Item to
include all necesary hardwere and fittings in Stainless Stell finish, Godrej multi purpose locks
including magnetic ball catcher etc. complete in all respects.
Entrance Door
Providing and fixing Entrance Door (glazed) as per drawing Sft.
no. 11 in Silver Anodised aluminium door section (Jindal make) in top and bottom, glazed with 12 mm
thick glass of approved made with etching and frosting. Item to include floor spring, lock, all
necessary hardware of Stainless Steel finish as approved by the Project Consultant/Bank complete
in all respects.
Door -both sides laminated
Providing and fixing solid core 38mm solid core Sft.
flush door finished with lippings in all side with necessary door hinges, cylindrical locks [ golden/
godrej/ozone],door closer, door stoppers etc with a frame work of teakwood / beechwood size
75mmx 62.5mm with necessary holdfast fixed on both sides duly finised with wooden lippings, A
wooden moulding size 1.5" x 2/8" to be provided all along the perifery of the framework in both the
sides. All the wooden area to be duly polished as per specifications of Architect.In case of partly
glazed door 8mm thick etched or plain glass with granular blasting/ sand blasting , as per design to
be fixed with neceaasy mouldings.
375
Writing ledge- P/f writing ledge as per design made up of 19mm comm. Board with necessary
no
groove pattern with 1.0mm laminate . 10mm machine polished glass to be provided on top of the
writing ledge. Small boxes to be made out of 12mm comm. Ply to be fixed on top of the writing ledge
with 1.0mm laminate, inside enamel painted. The work to be completed as per design and approval
of the architect.
1
19
20
21
25
84
22
Suggestion box- P/f suggestion box as per design/ approval of Architect.
NO
1
23
Cheque deposit box- P/f cheque deposit box as per design and approval of Architect.
NO
1
25
veritical blinds-.P/f vertical blind of standard aluminium section,
Of TRAC/MAC of cloth to be decided as per
Bank/ Architect.[ Rate of fabric- Rs800/- per sq.m]
Sft.
200
26
Soft board-With fabric encasing of color as approved by Architect/ bank, with backing of 6 mm thick Sft.
ply with 1” x ¾” thick steembeech wood moulding on outer periphery.with plastic film on top to protect
from dust etc. The moulding be finished with polish as approved.
27
Panelling-Providing & fixing Panelling on existing walls as per design & drawing with sub- frame of
size 38mm x50mm kail wood @ 500mm x 500mm c/c vertically & horizontally, treated with anti
termite and fire retardent paint. The frame to be fixed in walls with screws and wooden gutties. The
panelling made of 6mm thick commercial plywood, finished with 1mm thick laminate.
Rates to include necessary notches in frame on carrying electrical conduit and switch boxes. It
includes design & grooves in laminate as directed by Architect/Bank, includes providing
Steembeechwood moulding, lacquer polish on top of low height panelling wherever necessary etc,
complete in all respect to the satisfaction of Architect/ Bank.
Total of annexure-I
Sft.
40
550
×

Report this document