Motorola APX XE Remote Speaker Microphones Best Practices

Document technical information

Format pdf
Size 2.8 MB
First found May 10, 2016

Document content analysis

Category Also themed
Language
English
Type
not defined
Concepts
no text concepts found

Transcript

BEST
PRACTICES
FOR XE RSM
XE RSM
Best Practices
XE RSM
Best Practices
For the best performance
in extreme environments,
always follow 3 simple rules.
1.
ALWAYS WEAR ORANGE
BUTTON UP for best
water drainage
2.
ALWAYS talk
closest mic for
best voice quality
CLOSEST
MIC
MIC 1
MIC 2
Water Drain
CLOSEST MIC
YES
YES
YES
No
1-2 inches
3.
ALWAYS shake
to clear water
and then talk
Two or three brisk
vertical shakes
will cause water to
drain faster.
PAGE 2
XE RSM
Best Practices
Radio Profile
Configuration Enhancement
Improve communication intelligibility with two APX Radio Profile Audio Setting CPS
(Customer Programming Software) changes.
1. Enable TRANSMIT External Mic AGC to optimize XE RSM microphone signal level.
Set ‘TX Gain Control Output’ to 0, ‘TX Gain Control Total’ to 6.
2. Boost RECEIVE Treble Frequency to add crispness to speaker signal for better intelligibility.
Set ‘Treble Control’ to 6
PAGE 3
XE RSM
Best Practices
Motorola Solutions, Inc.
1301 East Algonquin Road, Schaumburg, Illinois 60196, U.S.A.
800-367-2346
motorolasolutions.com
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC
and are used under license. All other trademarks are the property of their respective owners. © 2013 Motorola Solutions, Inc. All rights reserved.
×

Report this document