SP-5000-USB

Document technical information

Format pdf
Size 264.8 kB
First found Nov 13, 2015

Document content analysis

Language
English
Type
not defined
Concepts
no text concepts found

Places

Transcript

SP-5000-USB
2560 x 2048
62 FPS
Spark Series
5-megapixel CMOS global shutter
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Large format 5 MP CMOS imager (global shutter)
Up to 62 fps at full resolution
5.0 µm square pixels in a 5:4 aspect ratio
Monochrome or Bayer color models
60 dB linear dynamic range with up to 100 dB piecewise HDR modes (monochrome only)
Analog front-end gain control for reduced noise in low light images
On-chip analog gain for individual R, G, + B control (color models)
Exposure control from 10 µs (1/100,000) to 8 seconds in 1 µs steps
ROI modes for flexible readout, windowing, or increasing frame rate
Vertical and horizontal binning on monochrome model
8/10-bit digital output over USB3 Vision interface
C-mount lens mount
Automatic Level Control (ALC) for dynamic lighting conditions
Programmable P-iris lens control or 3-axis control for operation of motorized lenses,
pan/tilt heads, or other analog accessories
www.jai.com
Spark Series
Specifications for SP-5000-USB
Specifications
Binning
EMVA 1288 Parameters
Absolute sensitivity (mono)
Absolute sensitivity (color)
Maximum SNR (mono)
Maximum SNR (color)
Traditional SNR*
Video signal output
mono
color
>55 dB (0 dB gain)
>53 dB (0 dB gain, green)
mono
color
8/10-bit monochrome
8/10-bit raw Bayer
0.7Vp-p, with 0.3V horiz. sync
Manual/automatic 0 dB to +24 dB
Auto-iris lens video output
Gain
White balance (SP-5000C)
Gamma
Synchronization
Trigger input
Trigger modes
Manual, one-push auto, or continuous
(3000K to 9000K)
0.45-1.0 (8 steps) or 256-point LUT
Internal
Opto In, TTL In, Pulse Generators (2),
Software, NAND 0, NAND 1
EPS, PIV, Trigger Width, Timed RCT (with ALC),
Sequence
Electronic shutter
Timed exposure
Auto shutter
Auto Level Control (ALC)
Connector pin-out
10 µs to 8 sec in 1 µs steps
1/62 to 1/100000 sec.
Shutter range from 1/62 to 1/100000, gain
range from 0 dB to +24 dB, auto iris control.
Tracking speeds and max values adjustable.
High Dynamic Range function
Pre-processing functions
4 built-in HDR slopes.
Selectable up to ~100 dB.
Flat field correction, color shading correction
(SP-5000C), blemish compensation
(512 pixels)
Programmable control of motorized lenses,
pan/tilt heads, and other analog accessories
-45°C to +70°C†
-45°C to +70°C
20 – 80% non-condensing
10 G (20Hz to 200Hz XYZ)
80 G
CE (EN61000-6-2, EN61000-6-3),
FCC Part 15 class B, RoHS/WEEE
12V to 24V DC ± 10%. 6.24W typical
(full frame @ 12V)
C-mount (fixed or adjustable)
62 mm x 62 mm x 55.5 mm
255 g
3-axis control
Operating temperature
Storage temperature
Humidity
Vibration
Shock
Regulations
Power
Lens mount
Dimensions (H x W x L)
Weight
Ordering Information
SP-5000M-USB
SP-5000C-USB
Monochrome camera with two-channel USB3 Vision
Color camera with two-channel USB3 Vision
*Traditional SNR is based on random noise in a single frame, where EMVA SNR measurements
consider more comprehensive noise sources and variance over time. For a more complete
description, see the manual.
†Reduced performance may occur when operating outside the standard range of -10°C to +50°C
Note: add -CX to model number for adjustable C-mount
Europe, Middle East & Africa
Phone +45 4457 8888
Fax +45 4491 3252
Asia Pacific
Phone +81 45 440 0154
Fax +81 45 440 0166
Visit our web site on www.jai.com
DC In / Trigger
USB 3.0 Interface
HIROSE HR10A-10R-12PB-01
Micro B type - ZX3600-B-10P or equiv.
Pin
Signal
No
I/O Name
1
2
3
4
5
6
7
8
9
10
11
12
GND
+12V to +24V DC input
GND
NC
Opto InOpto In+
Opto OutOpto Out+
TTL out 1
TTL in 1
+12V to +24V DC input
GND
1
2
I
VBUS IN
I/O DM
3
4
5
6
7
8
9
10
Power (VBUS)1
USB2.0 Differential
pair (-)2
I/O DP
USB2.0 Differential
pair (+)
OTG ID
USB OTG ID for
identifying lines
GND
GND
O
FX3 SSTXM USB3.0 Signal
Transmission line (-)
O
FX3 SSTXP USB3.0 Signal
Transmission
line (+)
GND
GND
I
FX3 SSRXP USB3.0 Signal
Receiving line (-)
I
FX3 SSRXM USB3.0 Signal
Receiving line (+)
SP-5000-USB does not accept power over USB
Does not work with USB 2.0
1
2
Spectral Response
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
400
500
600
700
Wavelength (nm)
Monochrome –
Red –
Green –
Note: Color response includes IR-cut filter.
Americas
Phone (Toll-Free) 1 800 445 5444
Phone +1 408 383 0300
Note
Blue –
800
900
1000
Company and product names mentioned in this datasheet are trademarks or registered trademarks of their respective owners.
JAI A/S cannot be held responsible for any technical or typographical errors and reserves the right to make changes to products and documentation without prior notification.
Full
ROI (mono)
1” CMOS global shutter
48 MHz
62 frames/sec.
12.8 mm (h) x 10.2 mm (v), 16.39 mm diagonal
5.0 μm (h) x 5.0 μm (v)
2560 (h) x 2048 (v)
2560 (h) x 2048 (v) up to 62 fps
1 line to full frame height in 1-line steps, with
X offset and width in 16-pixel steps
2 lines to full-frame height in 2-line steps,
with X offset and width in 16-pixel steps
1x2, 2x1, 2x2 (monochrome only)
10-bit output format
23.50 p (λ = 525 nm)
36.08 p (λ = 525 nm)
41.48 dB
38.00 dB
Sensitivity (relative QE x FF)
Sensor
Pixel clock
Frame rate, full frame
Active area
Cell size
Active pixels
Read-out modes
Dimensions
SP-5000-USB

Similar documents

×

Report this document