CENTOPLEX 0 EP, CENTOPLEX 2 EP
Multi-purpose greases with EP additives
CENTOPLEX 0 EP and 2 EP are
lubricating greases based on a
lithium soap thickener and special
mineral oils. They also contain EP
additives which improve wear
CENTOPLEX 0 EP and 2 EP are
resistant to oxidation, offer good lowtemperature properties, protect
against corrosion and are shear
Material safety data sheets can be
downloaded or requested via our
website www.klueber.com. You may
also obtain them through your
contact person at Klüber Lubrication.
CENTOPLEX 0 EP and
CENTOPLEX 2 EP
Good corrosion protection
CENTOPLEX 0 EP and 2 EP
greases can be used for the
lubrication of rolling and plain
bearings, guides, threaded spindles
and other machine elements.
These greases have also been
designed for the lubrication of gears
subject to high loads.
Composition, oil type
Drop point, DIN ISO 2176, [°C], approx.
CENTOPLEX 0 EP and 2 EP can be
applied by grease gun, brush or
spatula or through automatic
systems. Please observe the
instructions given by the
Cone penetration of lubricating greases,
DIN ISO 2137, worked penetration, 25 °C,
* (only CENTOPLEX 2 EP)
-20 to 130
355 - 385
265 - 295
Apparent dynamic viscosity, viscosity class***
Kinematic viscosity of the base oil,
DIN 51562 pt. 01, Ubbelohde,
40 °C, [mm²/s], approx.
100 °C, [mm²/s], approx.
Consistency, DIN ISO 51818, [NLGI]
Speed factor**, (n x dm), [mm/min.], approx.
Corrosion protection of lubricating greases,
DIN 51802, (SKF-EMCOR). Duration of test:
1 week, distilled water, corrosion degree
-25 to 110
Density, at 20 °C, [g/cm³], approx.
The minimum shelf life is approx. 24
months if the product is stored in its
unopened original container in a dry,
Service temperature range*, [°C], approx.
Minimum shelf life
Service temperatures are guide values which depend on the lubricant's composition, the intended use and the application
method. Lubricants change their consistency, apparent dynamic viscosity or viscosity depending on the mechanicaldynamical loads, time, pressure and temperature. These changes in product characteristics may affect the function of a
Speed factors are guide values which depend on the type and size of the rolling bearing type and the local operating
conditions, which is why they have to be confirmed in tests carried out by the user in each individual case.
Klüber viscosity grades: EL = extra light lubricating grease; L = light lubricating grease; M = medium lubricating grease;
S = heavy lubricating grease; ES = extra heavy lubricating grease
Klüber Lubrication München KG, Geisenhausenerstraße 7, 81379 München, Germany, phone +49 89 7876-0, fax +49 89 7876-333.
The data in this product information is based on our general experience and knowledge at the time of printing and is intended to give information of possible applications to a reader with technical
experience. It constitutes neither an assurance of product properties nor does it release the user from the obligation of performing preliminary tests with the selected product. We recommend
contacting our Technical Consulting Staff to discuss your specific application. If required and possible we will be pleased to provide a sample for testing. Klüber products are continually improved.
Therefore, Klüber Lubrication reserves the right to change all the technical data in this product information at any time without notice.
Klüber Lubrication, a company of the Freudenberg Group
Publisher and Copyright: Klüber Lubrication München KG. Reprints, total or in part, are permitted if source is indicated and voucher copy is forwarded.
Product information 5.739 e
Article numbers: 020126, 020071