MATERIALS AND FINISHES

Document technical information

Format pdf
Size 532,3 kB
First found мар 24, 2016

Document content analysis

Language
English
Type
not defined
Concepts
no text concepts found

Organizations

Places

Transcript

MATERIALS AND FINISHES
STANDARD MATERIALS
STANDARD FINISHES
Low Carbon Steel (F)
Plain/Oiled (K)
Low carbon steel is one of the most versatile materials
available. This material is readily available, and is the
most economical of the standard Solid Pin materials in the
absence of any plating or coating. Low carbon Solid Pins
have a dry to the touch rust preventative. Additional coatings
and finishes can be applied to carbon steel to improve
corrosion resistance, however for some applications, it may
be more appropriate and cost beneficial to specify stainless
steel when a high level of corrosion resistance is required.
Austenitic (Nickel) Stainless Steel (D)
Austenitic stainless steel provides excellent corrosion
protection against normal environmental conditions. It
withstands fresh water and atmospheric marine conditions
very well, and is suitable for many other industrial conditions
including acidic environments. All austenitic stainless Solid
Pins are passivated.
This finish is a thin coating of dry-to-the touch oil that
provides corrosion resistance during storage and shipping.
Since this lubricating oil is suspended in a carrier which
evaporates over time, the pins are dry-to-the-touch and
conducive for automatic feeding and assembly.
Passivated (P)
Passivation of stainless steel Solid Pins is a process
whereby surface contaminates such as embedded tool steel
and other free iron particles are removed. The sole purpose
of passivation is to remove embedded iron; not to clean the
part. While all stainless steel Solid Pins are passivated as a
standard, there are some critical applications that absolutely
require passivation such as medical devices, components
used in the food or drug industry, fuel system applications,
and any application requiring a clean environment.
Available only for stainless steel.
MATERIALS
TYPE
GRADE
FINISHES
F - Low Carbon Steel
UNS G10220 / C20C (1.0411)
K -Plain, oiled
D - Stainless Steel, Austenitic (Nickel)
UNS S30500 / X4CrNi18-12
P - Passivated
SPECIAL MATERIALS
SPIROL has extensive experience with special materials required for unique circumstances such as:
Alloy Steel (W)
Alloy steel is used for applications requiring higher shear
strength than our standard materials provide, or when
additional hardness is required to ensure that the pin is harder
than the host material into which the pin is being installed.
Aluminum (A)
Aluminum is lightweight, lead free, and has sufficient strength
for most plastic applications. Aluminum is less than half
the weight of steel, and does not require any supplemental
coatings or platings to provide the necessary corrosion
protection in most environments.
Other materials and finishes are available to order depending on the application requirements.
Innovative fastening solutions.
Lower assembly costs.
Americas
Technical Centers
SPIROL International Corporation
30 Rock Avenue
Danielson, Connecticut 06239 U.S.A.
Tel. +1 860 774 8571
Fax. +1 860 774 2048
SPIROL Shim Division
321 Remington Road
Stow, Ohio 44224 U.S.A.
Tel. +1 330 920 3655
Fax. +1 330 920 3659
Slotted Spring Pins
Solid Pins
Coiled Spring Pins
Ground Hollow
Dowels
Dowel Bushings /
Spring Dowels
Compression
Limiters
Rolled Tubular
Components
Inserts for Plastics
SPIROL Canada
3103 St. Etienne Boulevard
Windsor, Ontario N8W 5B1 Canada
Tel. +1 519 974 3334
Fax. +1 519 974 6550
SPIROL Mexico
Carretera a Laredo KM 16.5 Interior E
Col. Moisés Saenz
Apodaca, N.L. 66613 Mexico
Tel. +52 81 8385 4390
Fax. +52 81 8385 4391
SPIROL Brazil
Rua Mafalda Barnabé Soliane, 134
Comercial Vitória Martini, Distrito Industrial
CEP 13347-610, Indaiatuba, SP, Brazil
Tel. +55 19 3936 2701
Fax. +55 19 3936 7121
Europe SPIROL France
Cité de l’Automobile ZAC Croix Blandin
18 Rue Léna Bernstein
51100 Reims, France
Tel. +33 3 26 36 31 42
Fax. +33 3 26 09 19 76
Spacers
Precision Washers
SPIROL West
1950 Compton Avenue, Suite 112
Corona, California 92881 U.S.A.
Tel. +1 951 273 5900
Fax. +1 951 273 5907
Precision Shims &
Thin Metal Stampings
SPIROL United Kingdom
17 Princewood Road
Corby, Northants
NN17 4ET United Kingdom
Tel. +44 1536 444800
Fax. +44 1536 203415
SPIROL Germany
Ottostr. 4
80333 Munich, Germany
Tel. +49 89 4 111 905 71
Fax. +49 89 4 111 905 72
Disc Springs
SPIROL Spain
08940 Cornellà de Llobregat
Barcelona, Spain
Tel. +34 93 193 05 32
Fax. +34 93 193 25 43
SPIROL Czech Republic
Sokola Tůmy 743/16
Ostrava-Mariánské Hory 70900
Czech Republic
Tel/Fax. +420 417 537 979
Installation Technology
Parts Feeding
Technology
SPIROL Poland
ul. M. Skłodowskiej-Curie 7E / 2
56-400, Oleśnica, Poland
Tel. +48 71 399 44 55
Asia SPIROL Asia Headquarters
Pacific 1st Floor, Building 22, Plot D9, District D
Please refer to www.SPIROL.com for current specifications and standard product offerings.
SPIROL Application Engineers will review your application needs and work
with you to recommend the optimum solution. One way to start the process
is to visit our Optimal Application Engineering portal at SPIROL.com.
4
© 2016 SPIROL International Corporation 06/15 Rev. 1
No. 122 HeDan Road
Wai Gao Qiao Free Trade Zone
Shanghai, China 200131
Tel. +86 21 5046 1451
Fax. +86 21 5046 1540
SPIROL Korea
160-5 Seokchon-Dong
Songpa-gu, Seoul, 138-844, Korea
Tel. +86 (0) 21 5046-1451
Fax. +86 (0) 21 5046-1540
e-mail: [email protected]
×

Report this document