RN-PRHD

Document technical information

Format pdf
Size 205.9 kB
First found May 22, 2018

Document content analysis

Language
English
Type
not defined
Concepts
no text concepts found

Persons

Organizations

Places

Transcript

Release Notes
Presentation Recorder HD
Versions 6.9.26, 7.9.27 & 8.0.25
(Software Updates)
March 9th, 2016
NCast Support
Web site
www.ncast.com
Phone
+1 408-844-9080 x247
Email
[email protected]
FAX
+1 408-844-9091
Thank you for purchasing NCast products
April 2016
Introduction
This note covers the changes to software in the NCast Presentation Recorder products.
The fastest way to get support for your product is to open a support ticket on our website.
Go to the Contact page on our site to get started. It is often helpful to include the
downloaded logs with your ticket. Logs may be downloaded from the Status page on the
recorder.
Software Updates
You may obtain the most current software by clicking the UPDATE icon in the
Presentation Recorder web page.
•
8.0.x Releases – PR-HD Products
•
7.9.x Releases – PR-720 Extreme Products
•
6.9.x Releases – PR-720 Basic Products
Version 8.0.25 changes
March 9th, 2016
New features
Added upload to Google Drive.
Added upload to YouTube.
Added Media Gallery.
Added license key for Media Gallery.
Bug Fixes
No bugs!
Version 8.0.24 changes
February 4th, 2016
New features
This is a maintenance release only.
Bug Fixes
Memory leak fix - RTMP streaming leaked memory on each connection failure.
Version 8.0.23 changes
December 7th, 2015
New features
This is a maintenance release only.
Bug Fixes
Network iCalendar fix - added URL redirect.
Google calendar fix - only IP address was supported in Where field.
OSD fix - update IP address.
Page 2
Release Notes
6.9.26, 7.9.27, 8.0.25
April 2016
Version 8.0.22 changes
September 25th, 2015
New features
This is a maintenance release only.
Bug Fixes
Fixed scheduler issue when using Opencast 2.0 server.
Version 8.0.21 changes
July 23rd 2015
New features
Added Kaltura Drop Folder XML file option to FTP and SSH upload.
Bug Fixes
No bugs.
Version 8.0.20 changes
July 1st, 2015
New features
This is a maintenance release only.
Bug Fixes
iCalendar scheduler fix - iCalendar checkbox couldn't be set to on.
Auto window mode fix - window size was not set correctly for 1920x1200 inputs.
Version 8.0.19 changes
June 15th, 2015
New features
This is a maintenance release only.
Bug Fixes
Scheduler fix - forbidden chars in UTF-8 string could crash scheduler.
Version 8.0.18 changes
June 9th, 2015
New features
This is a maintenance release only.
Bug Fixes
RTMP streaming fix - reconnect to RTMP server on connection timeout.
Version 8.0.17 changes
March 16th, 2015
New features
Added PB serial command (start session).
Added UP serial command (upload progress).
Page 3
Release Notes
6.9.26, 7.9.27, 8.0.25
April 2016
Added C<num>,N serial command. This command selects channel <num>
without starting session.
Added network iCalendar support - scheduler downloads iCalendar file from
remote location (for example from Google Calendar).
Added Google Calendar API v3 support to scheduler.
Bug Fixes
VGA signal detection fix - fixed IFM measurments of vfreq and vtotal.
Serial interface fix - fixed streaming status for record only session type.
Upload start on slave unit fix - fixed rpc params and json encoding.
Audio capture fix - increased size of capture buffer, increased number of audio
encoder buffers.
RTPM streaming channels fix - unit was using multicast addresses in RTMP
streaming mode.
RTP library fix - process could crash because local source was removed (large
number of RTP receivers).
VGA picture freeze fix - for some cases VGA auto positioning was setting
negative hstart value.
Audio encode start fix - flush audio buffer on encode start to avoid large offset
between audio and video in recordings.
Slave upload to Matterhorn fix - fixed broken id.
Disabled M0 and M1 serial commands.
HTTPS protocol fix - updated lighttpd server to fix issues with HTTPS on some
browsers.
Quick Start page fix - allow coordinator to get /configuration/slave REST
endpoint.
Fixed broken VGA image and resolution detection.
Slave upload fix - on RTMP channels master unit sometimes would not initiate
upload on slave unit.
H.264 and MPEG-4 encoder pixel range fix - pixel range flag was incorrectly set
to 16-235 instead of 0-255.
Bigger OSD window - increased OSD window width and IP address font size.
Automatic archive remove fix - archives were not moving to trash after successful
upload.
H.264 decoder speed up - enabled closed loop decoder mode.
Tuned video decoding and buffering - on 1080 products receiver video was
distorted.
ST8028 lockup fix - if chip is not responding for 1 min reset it.
ST8028 communication fix - send commands to ST8028 at slower rate. ST8028
can ignore commands which are sent one after another - for example setting PIP
window.
Page 4
Release Notes
6.9.26, 7.9.27, 8.0.25
April 2016
Overlays loading fix - unit was not loading new overlay if its mod time was the
same as old overlay.
Recording auto start fix - don't auto start recording if it's already running (for
example it was started manually earlier).
Faster RTSP reconnection - try to reconnect to RTSP server every 10 secs
instead of every 1 min.
Slave unit configuration dialog fix - save configuration before Connection Test.
Architecture name fix - architecture name was cut on Status tab.
Minimum window size fix - don't set window size smaller than 2x2, setting width
or height to 0 could result in unexpected behaviour.
Signal detection status fix - signal status could be wrong if HDMI signal is
detected.
iCalendar fix - fixed recurrent event start time.
iCalendar fix - never-ending recurrent event fix. Parsing never-ending recurrent
event was saturating CPU.
iCalendar fix - CPU usage was 100% when old Google Calendar state was left
enabled.
VGA signal fix - reset capture chip on VGA signal misdetection.
Async RTMP connection start - RTMP start could block media process in some
cases (if server was not available).
Is serial command fix - removed new line from architecture.
Session start fix - make sure recording has stopped before starting new session.
Video capture fix - capture thread could block in some configurations.
Version 8.0.16 changes
September 2nd, 2014
New features
Changed RTMP/RTSP Channel Start – The Session will always start even if
there is no connection to the server (the unit tries to reconnect every 1 minute).
You can check on the server connection status via the web page (in the bottom
status bar) or by using a serial interface status command.
Updated NTP client version.
Factory defaults set NTP on.
Faster channel start - optimized overlays loading and reduced RTMP/RTSP
connection time.
Updated factory SSL certificate and private key – the old certificate was no
longer valid.
Added upload retry on failure. There will be 3 attempts of re-upload every 30
minutes.
Extended /rest/configuration/settings to import/export channels.
Master/Slave mode: recording pause button hidden at Master.
Page 5
Release Notes
6.9.26, 7.9.27, 8.0.25
April 2016
Added the possibility to load the system's configuration with a USB stick with
settings.json and settings.json.password files.
Bug Fixes
Video decoder fix - reserved more memory for video decoder.
1080P signal capture fix - eliminated frame stitching.
System logs fix - with Remote Logging enabled logs are saved to the SD card
too.
Fixed Kaltura API creator entry.
Kaltura authorized KMC users upload fix - removed partner ID.
Added additional Kaltura error messages in logs.
Upload progress to Matterhorn fix. It was showing constant value of 0%.
Version 8.0.15 changes
June 30th, 2014
New features
Added minimum fan speed option to the Custom tab. Automatic fan control will
never go below this speed. Required to manage some fan types.
Added /configuration/settings REST endpoint. This endpoint exports & imports all
configuration settings except files like overlays or SFTP keys.
Added custom SSH public keys upload from USB stick.
Bug Fixes
Software update from USB fix. Update from USB was looking for wrong release
filename (for example dm368_a.b.c.bin instead of basic_a.b.c.bin).
Matterhorn scheduler fix. Scheduler was not retrieving new events after 24h.
Suppressed REST API JSON error message. POST call with empty body was
printing warning message in logs.
Version 8.0.14 changes
June 5th, 2014
New features
This is a maintenance release only.
Bug Fixes
Matterhorn scheduler fixes: Fixed scheduler crash on configuration update. Fixed
condition for finding an in-progress recording.
Version 8.0.13 changes
May 29th, 2014
New features
Page 6
Release Notes
6.9.26, 7.9.27, 8.0.25
April 2016
Added "Remove archives automatically" option. When this option is enabled the
unit will automatically remove the oldest archives to free space for a new
recording.
Presentation Server/Matterhorn dynamic scheduling. Schedule is updated every
30 seconds.
Bug Fixes
Software update notification fix.
Channel layout editor fix.
Adjusted audio & video synchronization.
Settings import fix.
Scheduler overlapped events fix.
Fixed setting main window size. In some cases main window vertical size was
not set correctly.
Tuned I/O flush to minimize audio frame drops.
Version 8.0.12 changes
April 29th, 2014
New features
Added remote logging. System logs can be redirected to a PC host running a
syslog service.
Increased max log file size to 10240kB.
Bug Fixes
Fixed reported input signal resolution.
Fan speed is adjusted more frequently on unit startup (every 10 secs).
Version 8.0.11 changes
April 1st, 2014
New features
This is a maintenance release only.
Bug Fixes
Changed ADC settings for VGA and Component inputs. With old settings the
captured image was dark.
Changed RGB to YCbCr conversion for image and text overlays to use full 8-bit
range.
Reset ST8028 chip on unit reboot.
Version 8.0.10 changes
March 14th 2014
New features
Coordinator can shutdown and reboot unit.
Added good bye message to unit shutdown page.
Page 7
Release Notes
6.9.26, 7.9.27, 8.0.25
April 2016
Automatically resize or empty trash can to free disk space. If disk near-full
threshold is reached unit will try to go below threshold by automatically removing
oldest recordings from the trash can.
Report processes status in logs every 12h.
Bug Fixes
Fixed dc<0|1> serial command.
Changed fan speed control method. New method aims to keep board
temperature in 45C-47C range.
Version 8.0.9 changes
March 7th, 2014
New features
Changed search function on web page (archives, events and logs) to use regex
syntax and made it case sensitive.
Bug Fixes
Report correct recording duration in paused state.
PIP Full mode fix - sometimes main window was visible.
Fixed upload to Matterhorn in master/slave configuration. Upload recordings in
sequence and report correct status if upload from slave fails.
Fixed serial interface uploader status.
Fixed fan speed control support detection.
Version 8.0.8 changes
February 25th, 2014
New features
Changed upload start time granularity to 1 hour.
Added fan speed control.
Added board temperature monitoring.
Bug Fixes
Presentation Server upload fix.
Master/Slave connection fix.
Kaltura connection test fix.
Version 8.0.7 changes
January 21st, 2014
New features
Added main and PIP window full screen modes.
Added disk configuration options.
Added support for SDI input.
Bug Fixes
Page 8
Release Notes
6.9.26, 7.9.27, 8.0.25
April 2016
No bugs in this release.
Version 8.0.6 changes
December 2nd, 2013
New features
This is a maintenance release only.
Bug Fixes
STDP8028 reset workaround.
Export settings fix.
Software update from USB fix.
Version 8.0.5 changes
November 26th, 2013
New features
Added OSD options.
Enabled STDP8028 log messages
Bug Fixes
Automatic recording start fix.
Manual recording start fix.
Updated STDP8028 firmware update script.
Fixed udev init script.
Fixed software update from USB disk.
Version 8.0.4 changes
October 30th, 2013
New features
This is a maintenance release only.
Bug Fixes
Matterhorn scheduler fix.
Version 8.0.3 changes
October 24th, 2013
New features
This is a maintenance release only.
Bug Fixes
JSON memory leak fix.
Added support for special characters in capture agent name.
Version 8.0.2 changes
September 20th, 2013
New features
Page 9
Release Notes
6.9.26, 7.9.27, 8.0.25
April 2016
This is a maintenance release only.
Bug Fixes
Serial interface upload status fix.
Fixed RL serial command.
Fixed memory leaks.
HDMI & DVI signal detection fix.
Auto adjust fix.
Scheduler event location fix.
PPS encoding fix.
Version 8.0.1 changes
September 6th, 2013
New features
This is a maintenance release only.
Bug Fixes
Fixed REST endpoints for getting scheduler events.
Scheduler ICalendar parser fix.
Page 10
Release Notes
6.9.26, 7.9.27, 8.0.25
April 2016
Version 7.9.27 changes
March 9th, 2016
New features
Added upload to Google Drive.
Added upload to YouTube.
Added Media Gallery.
Added license key for Media Gallery.
Bug Fixes
No bugs!
Version 7.9.26 changes
February 4th, 2016
New features
This is a maintenance release only.
Bug Fixes
Memory leak fix - RTMP streaming leaked memory on each connection failure.
Version 7.9.25 changes
December 7th, 2015
New features
This is a maintenance release only.
Bug Fixes
Network iCalendar fix - added URL redirect.
Google calendar fix - only IP address was supported in Where field.
OSD fix - update IP address.
Version 7.9.24 changes
September 25th, 2015
New features
This is a maintenance release only.
Bug Fixes
Fixed scheduler issue when using Opencast 2.0 server.
Version 7.9.23 changes
July 23rd, 2015
New features
Added Kaltura Drop Folder XML file option to FTP and SSH upload.
Bug Fixes
No bugs.
Page 11
Release Notes
6.9.26, 7.9.27, 8.0.25
April 2016
Version 7.9.22 changes
July 1st, 2015
New features
This is a maintenance release only.
Bug Fixes
iCalendar scheduler fix - iCalendar checkbox couldn't be set to on.
Auto window mode fix - window size was not set correctly for 1920x1200 inputs.
Version 7.9.21 changes
June 15th, 2015
New features
This is a maintenance release only.
Bug Fixes
Scheduler fix - forbidden chars in UTF-8 string could crash scheduler.
Version 7.9.20 changes
June 9th, 2015
New features
This is a maintenance release only.
Bug Fixes
RTMP streaming fix - reconnect to RTMP server on connection timeout.
Version 7.9.19 changes
May 29th, 2015
New features
This is a maintenance release only.
Bug Fixes
Video framerate fix - framerate was fixed to 25.
Fixed Is serial command - Genesis code version was followed by new line.
Version 7.9.18 changes
March 16th, 2015
New features
Added PB serial command (start session).
Added UP serial command (upload progress).
Added C<num>,N serial command. This command selects channel <num>
without starting session.
Added network iCalendar support - scheduler downloads iCalendar file from
remote location (for example from Google Calendar).
Added Google Calendar API v3 support to scheduler.
Bug Fixes
Page 12
Release Notes
6.9.26, 7.9.27, 8.0.25
April 2016
Serial interface fix - fixed streaming status for record only session type.
Upload start on slave unit fix - fixed rpc params and json encoding.
Audio capture fix - increased size of capture buffer, increased number of audio
encoder buffers.
RTMP streaming channels fix - unit was using multicast addresses in RTMP
streaming mode.
RTP libarary fix - process could crash because local source was removed (large
number of RTP receivers).
Audio encode start fix - flush audio buffer on encode start to avoid large offset
between audio and video in recordings.
Slave upload to Matterhorn fix - fixed broken id.
Disabled M0 and M1 serial commands.
HTTPS protocol fix - updated lighttpd server to fix issues with HTTPS on some
browsers.
Quick Start page fix - allow coordinator to get /configuration/slave REST
endpoint.
Slave upload fix - on RTMP channels master unit sometimes would not initiate
upload on slave unit.
H.264 and MPEG-4 encoder pixel range fix - pixel range flag was incorrectly set
to 16-235 instead of 0-255.
Bigger OSD window - increased OSD window width and IP address font size.
Automatic archive remove fix - archives were not moving to trash after successful
upload.
H.264 decoder speed up - enabled closed loop decoder mode.
Tuned video decoding and buffering - on 1080 products receiver video was
distorted.
Overlays loading fix - unit was not loading new overlay if it's mod time was the
same as old overlay.
Recording auto start fix - don't auto start recording if it's already running (for
example it was started manually earlier).
Faster RTSP reconnection - try to reconnect to RTSP server every 10 secs
instead of every 1 min.
Slave unit configuration dialog fix - save configuration before Connection Test.
Architecture name fix - architecture name was cut on Status tab.
iCalendar fix - fixed recurrent event start time.
iCalendar fix - never-ending recurrent event fix. Parsing never-ending recurrent
event was saturating CPU.
iCalendar fix - CPU usage was 100% when old Google Calendar state was left
enabled.
Page 13
Release Notes
6.9.26, 7.9.27, 8.0.25
April 2016
Async RTMP connection start - RTMP start could block media process in some
cases (if server was not available).
Is serial command fix - removed new line from architecture.
Session start fix - make sure recording has stopped before starting new session.
Video capture fix - capture thread could block in some configurations.
Page 14
Release Notes
6.9.26, 7.9.27, 8.0.25
April 2016
Version 6.9.26 changes
March 9th, 2016
New features
Added upload to Google Drive.
Added upload to YouTube.
Added Media Gallery.
Added license key for Media Gallery.
Bug Fixes
No bugs!
Version 6.9.25 changes
February 4th, 2016
New features
This is a maintenance release only.
Bug Fixes
Memory leak fix - RTMP streaming leaked memory on each connection failure.
Version 6.9.24 changes
December 7th, 2015
New features
This is a maintenance release only.
Bug Fixes
Network iCalendar fix - added URL redirect.
Google calendar fix - only IP address was supported in Where field.
OSD fix - update IP address.
Version 6.9.23 changes
September 25th, 2015
New features
This is a maintenance release only.
Bug Fixes
Fixed scheduler issue when using Opencast 2.0 server.
Version 6.9.22 changes
July 23rd, 2015
New features
Added Kaltura Drop Folder XML file option to FTP and SSH upload.
Bug Fixes
No bugs.
Page 15
Release Notes
6.9.26, 7.9.27, 8.0.25
April 2016
Version 6.9.21 changes
July 1st, 2015
New features
This is a maintenance release only.
Bug Fixes
iCalendar scheduler fix - iCalendar checkbox couldn't be set to on.
Auto window mode fix - window size was not set correctly for 1920x1200 inputs.
Version 6.9.20 changes
June 15th, 2015
New features
This is a maintenance release only.
Bug Fixes
Scheduler fix - forbidden chars in UTF-8 string could crash scheduler.
Version 6.9.19 changes
June 9th, 2015
New features
This is a maintenance release only.
Bug Fixes
RTMP streaming fix - reconnect to RTMP server on connection timeout.
Version 6.9.18 changes
March 16th, 2015
New features
Added PB serial command (start session).
Added UP serial command (upload progress).
Added C<num>,N serial command. This command selects channel <num>
without starting session.
Added network iCalendar support - scheduler downloads iCalendar file from
remote location (for example from Google Calendar).
Added Google Calendar API v3 support to scheduler.
Bug Fixes
Serial interface fix - fixed streaming status for record only session type.
Upload start on slave unit fix - fixed rpc params and json encoding.
Audio capture fix - increased size of capture buffer, increased number of audio
encoder buffers.
RTMP streaming channels fix - unit was using multicast addresses in RTMP
streaming mode.
RTP libarary fix - process could crash because local source was removed (large
number of RTP receivers).
Page 16
Release Notes
6.9.26, 7.9.27, 8.0.25
April 2016
Audio encode start fix - flush audio buffer on encode start to avoid large offset
between audio and video in recordings.
Slave upload to Matterhorn fix - fixed broken id.
Disabled M0 and M1 serial commands.
HTTPS protocol fix - updated lighttpd server to fix issues with HTTPS on some
browsers.
Quick Start page fix - allow coordinator to get /configuration/slave REST
endpoint.
Slave upload fix - on RTMP channels master unit sometimes would not initiate
upload on slave unit.
H.264 and MPEG-4 encoder pixel range fix - pixel range flag was incorrectly set
to 16-235 instead of 0-255.
Bigger OSD window - increased OSD window width and IP address font size.
Automatic archive remove fix - archives were not moving to trash after successful
upload.
H.264 decoder speed up - enabled closed loop decoder mode.
Overlays loading fix - unit was not loading new overlay if it's mod time was the
same as old overlay.
Recording auto start fix - don't auto start recording if it's already running (for
example it was started manually earlier).
Faster RTSP reconnection - try to reconnect to RTSP server every 10 secs
instead of every 1 min.
Slave unit configuration dialog fix - save configuration before Connection Test.
Architecture name fix - architecture name was cut on Status tab.
iCalendar fix - fixed recurrent event start time.
iCalendar fix - never-ending recurrent event fix. Parsing never-ending recurrent
event was saturating CPU.
iCalendar fix - CPU usage was 100% when old Google Calendar state was left
enabled.
Async RTMP connection start - RTMP start could block media process in some
cases (if server was not available).
Is serial command fix - removed new line from architecture.
Session start fix - make sure recording has stopped before starting new session.
Video capture fix - capture thread could block in some configurations.
Version 6.9.17 changes
September 2nd, 2014
New features
Changed RTMP/RTSP Channel Start – The Session will always start even if
there is no connection to the server (the unit tries to reconnect every 1 minute).
Page 17
Release Notes
6.9.26, 7.9.27, 8.0.25
April 2016
You can check on the server connection status via the web page (in the bottom
status bar) or by using a serial interface status command.
Updated NTP client version.
Factory defaults set NTP on.
Faster channel start - optimized overlays loading and reduced RTMP/RTSP
connection time.
Updated factory SSL certificate and private key – the old certificate was no
longer valid.
Added upload retry on failure. There will be 3 attempts of re-upload every 30
minutes.
Extended /rest/configuration/settings to import/export channels.
Master/Slave mode: recording pause button hidden at Master.
Added the possibility to load the system's configuration with a USB stick with
settings.json and settings.json.password files.
Bug Fixes
System logs fix - with Remote Logging enabled logs are saved to the SD card
too.
Fixed Kaltura API creator entry.
Kaltura authorized KMC users upload fix - removed partner ID.
Added additional Kaltura error messages in logs.
Upload progress to Matterhorn fix. It was showing constant value of 0%.
Version 6.9.16 changes
June 30th, 2014
New features
Added /configuration/settings REST endpoint. This endpoint exports & imports all
configuration settings except files like overlays or SFTP keys.
Added custom SSH public keys upload from USB stick.
Bug Fixes
Matterhorn scheduler fix. Scheduler was not retrieving new events after 24h.
Suppressed REST API JSON error message. POST call with empty body was
printing warning message in logs.
Version 6.9.15 changes
June 5th, 2014
New features
This is a maintenance release only.
Bug Fixes
Matterhorn scheduler fixes: Fixed scheduler crash on configuration update. Fixed
condition for finding an in-progress recording.
Page 18
Release Notes
6.9.26, 7.9.27, 8.0.25
April 2016
Version 6.9.14 changes
May 29th, 2014
New features
Added "Remove archives automatically" option. When this option is enabled the
unit will automatically remove the oldest archives to free space for a new
recording.
Presentation Server/Matterhorn dynamic scheduling. Schedule is updated every
30 seconds.
Bug Fixes
Software update notification fix.
Channel layout editor fix.
Settings import fix.
Scheduler overlapped events fix.
Tuned I/O flush to minimize audio frame drops.
Version 6.9.13 changes
April 29th, 2014
New features
Added remote logging. System logs can be redirected to a PC host running a
syslog service.
Increased max log file size to 10240kB.
Bug Fixes
Fixed reported input signal resolution.
Version 6.9.12 changes
March 14th, 2014
New features
Coordinator can shutdown and reboot unit.
Added good bye message to unit shutdown page.
Automatically resize or empty trash can to free disk space. If disk near full
threshold is reached unit will try to go below threshold by automatically removing
oldest recordings from the trash can.
Report processes status in logs every 12h.
Bug Fixes
Fixed dc<0|1> serial command.
Version 6.9.11 changes
March 7th, 2014
New features
Changed search function on web page (archives, events and logs) to use regex
syntax and made it case sensitive.
Page 19
Release Notes
6.9.26, 7.9.27, 8.0.25
April 2016
Bug Fixes
Report correct recording duration in paused state.
PIP Full mode fix - sometimes main window was visible.
Fixed upload to Matterhorn in master/slave configuration. Upload recordings in
sequence and report correct status if upload from slave fails.
Fixed serial interface uploader status.
Version 6.9.10 changes
February 24th, 2014
New features
Changed upload start time granularity to 1 hour.
Bug Fixes
Presentation Server upload fix.
Master/Slave connection fix.
Kaltura connection test fix.
Version 6.9.9 changes
January 21st, 2014
New features
Added main and PIP window full screen modes.
Added disk configuration options.
Bug Fixes
No bugs in this release.
Version 6.9.8 changes
November 26th, 2013
New features
Added OSD options.
Bug Fixes
Automatic recording start fix.
Manual recording start fix.
Fixed udev init script.
Fixed software update from USB disk.
Version 6.9.7 changes
October 30th, 2013
New features
This is a maintenance release only.
Bug Fixes
Matterhorn scheduler fix.
Page 20
Release Notes
6.9.26, 7.9.27, 8.0.25
April 2016
Version 6.9.6 changes
October 24th, 2013
New features
This is a maintenance release only.
Bug Fixes
JSON memory leak fix.
Added support for special characters in capture agent name.
Version 6.9.5 changes
September 12th, 2013
New features
This is a maintenance release only.
Bug Fixes
Serial interface upload status fix.
Fixed RL serial command.
Version 6.9.4 changes
September 6th, 2013
New features
This is a maintenance release only.
Bug Fixes
Fixed REST endpoints for getting scheduler events.
Scheduler ICalendar parser fix.
Version 6.9.3 changes
August 16th, 2013
New features
This is a maintenance release only.
Bug Fixes
Serial interface fix.
Version 6.9.2 changes
August 7th, 2013
New features
This is a maintenance release only.
Bug Fixes
Status tab refresh fix. Time listed on the Status tab now updated.
Web page reload fix. Updated when javascript changes.
Serial interface overrun condition fixed.
Version 6.9.1 changes
Page 21
August 2nd, 2013
Release Notes
6.9.26, 7.9.27, 8.0.25
April 2016
New features
Added archive playback to web page. Use the “Play” button to view archives.
Bug Fixes
Matterhorn SSL protocol fix.
Version 6.9.0 changes
July 15th, 2013
New features
Added slave unit feature. Allows Master/Slave pairing for dual hi-def recording.
Kaltura connection test now checks credentials.
Bug Fixes
OSD window position.
Display mode change.
HDMI PAL signal position.
HTTP resume header.
Version 6.8.4 changes
June 15th, 2013
New features
This is a maintenance release only.
Bug Fixes
Gm1601 auto adjust fix. Caused VGA component input to fail.
Version 6.8.3 changes
June 12th, 2013
New features
Archive processing & uploading can start when session is active.
Added "Upload XML file" option.
Added Presentation Server events & notifications.
Bug Fixes
Auto stop session after recording auto stop on recording only channel.
Web page hiding on load fix (for Google Chrome on Windows 7).
REST API etag and modtime fix.
Matterhorn scheduler fix.
Matterhorn upload when Series not specified fix.
Kaltura password fix.
Version 6.8.2 changes
May 31st, 2013
New features
Page 22
Release Notes
6.9.26, 7.9.27, 8.0.25
April 2016
Added audio input delay option. Allows fine tuning of audio-video
synchronization.
Bug Fixes
Fixed rest process configuration update.
Added channel preview refresh on web page.
Import settings fix.
Version 6.8.1 changes
May 9th, 2013
New features
Added software update notes. Provides information on new features and fixes.
Added RE serial command (empty archive trash).
Added audio only mode.
Bug Fixes
New software update check fix.
Fixed progress indicator on Uploads tab.
Web page audio level fix.
Fixed Matterhorn events buffer overflow.
Fixed Matterhorn start session sleep.
Fixed upload to Matterhorn (files with non-existent ID).
Recording's Title and Presenter set according to Matterhorn XML.
Matterhorn XMLs stored in archive's info file.
Version 6.8.0 changes
April 18th, 2013
New features
Added secondary archive upload option, e.g., upload to USB and a server.
Changed third and fourth text overlays to time-of-day counters (time-stamps).
Bug Fixes
None.
Version 6.7.3 changes
April 16th, 2013
New features
Dynamic text overlays added to text windows. Allows time-stamp burn-in.
Presentation Server/Matterhorn upload without using a zip file.
Added RTMP server reconnect.
Bug Fixes
SFTP upload fix.
Page 23
Release Notes
6.9.26, 7.9.27, 8.0.25
April 2016
Archives download fix.
Safari capture preview fix.
Version 6.7.2 changes
March 6th, 2013
New features
Added SSL support to Presentation Server.
Presentation Server scheduler improvements.
Bug Fixes
Kaltura authentication fix.
Version 6.7.1 changes
February 20th, 2013
New features
This is a maintenance release only.
Bug fixes
Disabled "Verify user password" option.
Removed web page logout function.
Version 6.7.0 changes
February 15th, 2013
New features
Added Main & PIP window mode option.
Added support for RTMP authentication.
Added SNMP support.
Implemented "Verify user password" option.
Added web page logout function.
Bug Fixes
RTMP performance fix (set out chunk size to 4096).
Changed "Archive ready" event to "Archive create" event.
Presentation Server events update fix.
Validated HTML files.
Version 6.6.0 changes
January 24th, 2013
New features
Added RTMP streaming protocol support. Connects with Adobe FMS, CDNs.
Set DHCP hostname to a user friendly value.
Added UPS support. Allows programmed power shutdown.
Disabled limited auto adjust.
Page 24
Release Notes
6.9.26, 7.9.27, 8.0.25
April 2016
Enabled auto adjust for video modes and on video channel.
Bug Fixes
Web page audio meter fix.
Firmware factory reset fix.
Fixed recovery access.
Version 6.5.1 changes
December 7th, 2012
New features
Support for automatic upload to Kaltura servers.
Added RTSP support for Evostream Media Server.
Added PIP enable/disable and text overlays edit in Quick Start.
No network functionality added (i.e. network connection not required).
New default settings (Auto) for video and graphics inputs.
Added SDP session name.
Updated info screens.
Network packet sending optimization.
Reimplemented image overlays.
Bug Fixes
Recording auto-start fix.
Subtitle uploads to Presentation Server.
Video decoder status fix.
REST API archive description encoding fix.
Logs sorting fix.
Version 6.5.0 changes
October 1st, 2012
New features
Initial release.
Bug Fixes
N/A.
Page 25
Release Notes
6.9.26, 7.9.27, 8.0.25

Similar documents

×

Report this document