PLUS+1® MC024-020 and MC024-022 Controllers Data

Document technical information

Format pdf
Size 275.5 kB
First found May 22, 2018

Document content analysis

Category Also themed
Language
English
Type
not defined
Concepts
no text concepts found

Persons

Organizations

Places

Transcript

MAKING MODERN LIVING POSSIBLE
Data Sheet
PLUS+1® Controllers
MC024-020 and MC024-022
Mobile Machine Management
MC024-020 and MC024-022 controllers are
elements of the flexible, powerful, expandable, and
affordable PLUS+1 family of mobile machine
management products. These devices are
general-purpose controllers that are equally suited
for use as members of a distributed machine
control system, with intelligence in every node, or
as stand-alone controllers.
Product Highlights
The MC024-020 employs a Digital Signal Processor
(DSP), providing the controller with extremely fast
single cycle processing speed and 128K internal
flash. The MC024-022 has an application key that
enables the use of Danfoss developed GUIDE
machine control solutions. The same GUIDE HWD
file is used with both controllers.
Application Development
Users develop MC024-020 and MC024-022
applications with PLUS+1 GUIDE. This Microsoft®
Windows® based development environment
features a user-friendly, field proven, icon-based
graphical programming tool, application
downloader, and service/diagnostic tool.
Features
520L0713 • Rev KC • Mar 2014
yy User-programmable with PLUS+1 GUIDE
(Graphical User Integrated Development
Environment)
yy 24 pins: (2) individually keyed Deutsch® DTM
12 pin connectors
yy 32 bit fixed-point DSP running at 150 MHz
–– 12 bit analog-to-digital converter
–– 16 bit timers/counters
yy 8 inputs
–– (5) universal (DIN/AIN/FreqIN) that are
user-defined as either:
Analog: with configurable ranges
0 to 5.25 Vdc (with over range protection)
or 0 to 36 Vdc;
Digital: pull up (5 Vdc), pull down (0 Vdc) or
pull to center (2.5 Vdc);
Frequency (timing): 1 Hz to 10 kHz
–– (2) digital (DIN) configurable as pull up
(5 Vdc), pull down (0 Vdc)
–– (1) fixed range analog (AIN/CAN shield)
0 to 5.25 Vdc or CAN shield pin
yy 8 outputs
–– (8) universal (PWMOUT/DOUT/PVGOUT)
that are user-defined as either:
Digital: (3 A), configurable as source or
sink;
PWM: (30 to 4000 Hz), configurable as
open or closed loop with current control;
Analog voltage: open loop PWM at 4000 Hz
–– Any PWMOUT/DOUT/PVGOUT can be used
to provide reference power to one PVG
valve
yy 9 to 36 Vdc power supply, monitored internally
yy 1 CAN 2.0 B port, the fixed range analog input
can be configured as the shield pin
yy Power supply for external sensors rated at
5 Vdc to 200 mA and regulated internally
yy 2 LEDs under user control
yy 3 mounting alternatives: stack, end, or side
yy MC024-022 contains application key required
to run Danfoss developed machine control
application software
yy CE compliant
Data Sheet
PLUS+1® Controllers MC024-020 and MC024-022
Dimensions and Pin Assignments
MC024-020 and MC024-022 Mounting Dimensions
in Millimeters [Inches]
MC024-020 and MC024-022 24 Pin Connectors
Connector 2
Connector 1
Pin
C2-P1
C2-P2
C2-P3
C2-P4
C2-P5
C2-P6
C2-P7
C2-P8
C2-P9
C2-P10
C2-P11
C2-P12
114.4 [4.50]
35.0 [1.38]
158.2 [6.23]
144.5 [5.69]
25.2 [1.0]
97.0
[3.82]
142.0 [5.59]
Controller function
DIN/AIN/FreqIN
DIN/AIN/FreqIN
PWMOUT/DOUT/PVGOUT
PWMOUT/DOUT/PVGOUT
PWMOUT/DOUT/PVGOUT
PWMOUT/DOUT/PVGOUT
PWMOUT/DOUT/PVGOUT
PWMOUT/DOUT/PVGOUT
PWMOUT/DOUT/PVGOUT
PWMOUT/DOUT/PVGOUT
Power supply +
Power supply +
Connector 2
'B' key (black)
2
Connector 2
Controller function
Power ground Power supply +
CAN +
CAN Connector 2
AIN/CAN shield
'B' key (black)
DIN
DIN
12
1
5 Vdc sensor power +
11
2
Sensor
10
3 power ground 9
4
DIN/AIN/FreqIN
8
5
DIN/AIN/FreqIN
7
6
DIN/AIN/FreqIN
Connector 1
'A' key (gray)
1
Connector 1
51.6 [2.03]
47.1 [1.85]
2195B
CCaution
PCB damage may occur. All device power supply + pins must be
connected to battery +.
CCaution
This device is not field serviceable. Opening the device housing
will void the warranty.
Specifications
Product Parameters
12
11
10
1
2
3
12
11
10
1
2
3
9
8
4
5
9
8
4
5
7
6
7
6
2196B
Connector 1
'A' key (gray)
Use care when wiring mating connector. Above pinouts are for
device pins.
12
11
10
1
2
3
9
8
4
5
7
6
Product Part Numbers
Supply voltage
Operating temperature (ambient)
Storage temperature
9 to 36 Vdc
-40°C to 70°C [-40°F to 158°F]
-40°C to 85°C [-40°F to 185°F]
Programming temperature
IP rating
(with mating connector attached)
EMI/RFI rating
Weight
Vibration
Shock
Maximum current, sourcing
Maximum current, sinking
0°C to 70°C [32°F to 158°F]
IP 67
Danfoss
Power Solutions US Company
2800 East 13th Street
Ames, IA 50010, USA
Phone: +1 515 239 6000
Pin
C1-P1
C1-P2
C1-P3
C1-P4
C1-P5
C1-P6
C1-P7
C1-P8
C1-P9
C1-P10
C1-P11
C1-P12
MC024-020
2196B
MC024-022
Related Products Part Numbers
CG150 CAN/USB Gateway
Deutsch® mating connector
bag assembly
PLUS+1 GUIDE
single user license
100 V/M
0.40 kg [0.88 lb]
IEC 60068-2-64
IEC 60068-2-27 test Ea
24 A
8A
10100993
11013733
10104136
10102023
(16 to 20 AWG)
10101000
10100945
(20 to 24 AWG)
Comprehensive literature on line at: www.danfoss.com
PLUS+1 Controller Family Technical Information, 520L0719;
MC024-020 Application Program Interface (API)10102115.doc;
MC024-022 API Document
Danfoss
Power Solutions GmbH & Co. OHG
Krokamp 35
D-24539 Neumünster, Germany
Phone: +49 4321 871 0
Danfoss
Power Solutions ApS
Nordborgvej 81
DK-6430 Nordborg, Denmark
Phone: +45 7488 2222
Danfoss
Power Solutions
(Shanghai) Co. Ltd.
Building #22, No. 1000 Jin Hai Rd
Jin Qiao, Pudong New District
Shanghai, China 201206
Phone: +86 21 3418 5200
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products
already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed.
All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
520L0713 • Rev KC • Mar 2014
www.danfoss.com © Danfoss A/S, 2013
×

Report this document