Laser Harp Digital instrument and Sound generation Adam Langoria Matthew Gann

Document technical information

Format pdf
Size 563.6 kB
First found May 22, 2018

Document content analysis

Category Also themed
Language
English
Type
not defined
Concepts
no text concepts found

Persons

Organizations

Places

Transcript

Laser Harp
Digital instrument and Sound generation
Adam Langoria Matthew Gann
System Overview
• Laser Break Beam
Sensors
• R2R Digital to Analog
Converter
• Virtual Ground and
power amplification
Laser Break Beam Sensors
• Laser Transmitter
– 100Ω Current limiting
resistor
– Laser Diode
– Culminating lens
• Laser Receiver
– 10kΩ pull up resistor
– Active high design
– NPN photo transistors
R2R Digital Analog Converter
• R2R Resistor Network
– 20kΩ and 40kΩ values
– Single Inline Package
– 1% tolerance
Virtual Ground and Amplification
• Virtual Ground
– Low Pass Filter
• 10kΩ and 200μF
• .08 Hz Cut Off Frequency
• Follows the moving average
voltage
• Opamp to sink and source
current
• Amplification
– Opamp
• Unity Gain, gain of 1
• Used for isolation from R2R
network
• Can source and sink much
greater current
Laser Harp
Digital instrument and Sound generation
Adam Langoria Matthew Gann
×

Report this document