A Look on Different Methods of Polishing concrete

Document technical information

Format pdf
Size 268.1 kB
First found Mar 15, 2018

Document content analysis

Category Also themed
Language
English
Type
not defined
Concepts
no text concepts found

Persons

Organizations

Places

Transcript

A Look on Different Methods of Polishing
concrete!
The many advances in technology have meant that it is now possible to grind concrete such that
it is reproduced as highly polished flooring. Its hardness, durability and easy maintenance have
meant that it is now the preferred type of concrete grinding Brisbane flooring for most
commercial and private buildings. The process of polishing concrete is very similar to that of
sanding wood. Specialized machines are used to make the concrete smooth by grinding it in
diamond abrasive equipment. Depending on the type of fineness required, it is possible to move
from fine to very finely ground concrete.
Those building owners that find marble hard to procure would be happy to go for Epoxy
Warehouse Floors Brisbane. It is easy to maintain, comes in highly polished versions that could
pass for marble and comes at a relatively cheap price. The process of polishing is a special one
that makes use of special tools and equipments. It is a process that involves multiple steps to
achieve goo results. While there are basic procedures for arriving at the finished product, each
job may be unique and require slightly different steps.
Methods of polishing concrete
Concrete floors Brisbane can be polished using a dry or wet method. While each has its pros
and cons, most manufacturers prefer to go for the dry method simply because it is a faster
option. In wet polishing water is used. The wet method is more effective when it comes to the
aggregate being exposed. However a lot of slurry is generated which brings up issues of
environmental concerns especially when it comes to proper disposal. Dry polishing requires no
water as the polisher is attached to a containment equipment that sucks up all the dust and
leaves the place clean.
Steps used in polishing concrete
There are different steps involved in floor polishing brisbane: understand the condition of the
concrete, prepare the surface, start polishing, densify the concrete, final polishing, and
protecting the concrete.




Understanding the concrete; to be able to polish an existing floor, you have to first check
out for things like cracks, existing polish or mastic. If the coating on the floor is minor, it
can be easily removed by the grinding action of the diamond abrasive.
Prepare the surface; this step requires removal of any polishing and coating that may be
on the floor. Any cracks or joints on the floor may be filled up at this time.
Start polishing; after the coat is removed and any cracks filled up, it is now time to start
coarse grinding. This is the first step that prepares the epoxy flooring brisbane for the
other processes.
Densify the concrete; once the floor is coarse ground, a chemical is applied to the floor
which helps to harden and protect it.
×

Report this document