Tips for Embroidery Digitizing
Company for Fine Detail Designs
Fine details within embroidery are taking a new shape in the embroidery digitizing company.
With increased popularity, these fine details had turned out amazing.
But the making of these fine details is quite a difficult process for a large number of digitizing
company. As the fine details in embroidery designs are in demand there is one only thing the
embroidery digitizing company should focus on and it is actually the art to master all the fine
details of embroidery digitizing.
A few years back, lightweight threads were not commonly used in the best embroidery
digitizing services and so there was no importance to deal with such things. But, time has been
changed and embroidery digitizing companies are now focusing on the small letters along with
complicated logos. This is why here are the top tips that every digitizing company can use for
their daily embroidery work to deal with the finest details with surety and confidence.
• High Stitches Work Best In Digitizing Company:
It is well known that working over fine details needs thin threads as compared to the other
details in the standard working. The most commonly used standard thread is 40 number thread
but when it comes to the fine details within embroidery digitizing company, the 60 number
thread has been used. Moreover, dealing with the light weight thread allows you to adjust the
stitch density according to the details.
When the threads are bought, stitch density is usually offered by the manufacturers with them
and it is highly recommended to use such stitch density provided, in order to ensure that the
work is going with complete fineness. The thin threads not only offer amazing results, but it
also improves the level of profit as well. Many digitizing companies charge on the basis of the
stitch count and so, with increase in the density of the stitch count, you can easily increase the
profits from your digitizing company projects.
Appropriate Underlay Selection:
Designers that work with the small letters and thin threads can get sink within fabric. To get
rid of such things, it is usually recommended to use the stronger and appropriate underlay
which is sewn within fabric color. No such strictness is allowed within the underlay used in
fine detail designs within embroidery digitizing company. You have to consider the only
underlay with ability to stay over the fabric. Most digitizing companies use the edge walk as
well as center walk underlay.
The selection of the underlay within embroidery digitizing is highly challenged with fabric
type that is used such as; if you are going to use within cheap digitizing embroidery an
embroidery design over the slippery material then there is a higher chance of sink in with such
fabric. So, in such cases, it is always necessary to use the solid and highly strong underlay. This
is how the foundation for the smaller designs will be clear and you will get a nice sew out.
Considerations For The Thread Path:
Focus on the path of the thread is highly important when dealing with the fine embroidery
details. It is always important to deal small letters in the highly natural ways and one letter
must be digitalized within the digitizing company in such a way that the majority people write
Before starting the work over the letters, it is recommended to work on the initials as which
letter is going to be drawn first! This digitizing company design allows you to draw the letter
shapes in your mind and then decide that which of the points should be started at first that will
become near to next letter. The major benefit of nearer letters is that it allows a smaller number
of trims and the small stitch from one letter towards the next will be unobvious.
Easy And Simple Fonts:
It is always important to use simple fonts when the small lettering is used in the embroidery
digitizing. This is how the things will turn out to be simple and they will also enhance the
design readability. The fancy font is not the requirement here in embroidery digitizing
company because it doesn’t produce aesthetics in the design. At the same time, if you are
working with the complicated designs then it is recommended to avoid details and make things
simple. The most important thing for the digitizers is to make the letters readable.
Selection Of Needles In Digitizing Company:
Selecting the needle for fine details is not a crucial task and all it needs are some small tips and
tricks. The larger needles that you use with the wide threads are not recommended for the
thinner threads too. The big needles with the thin threads can easily destroy the fabric with its
piercing and large holes that will quickly damage your entire fabric and work. This is the
reason; the thinner threads are used with the small needles which don’t lead to the damaging
of the fabric. For the thread with the 60 number, the most commonly used needle is 65/9 for
Exceptions always exist in all the cases, such as, when you are using the special materials such
as caps then working will the smaller needles and fine threads are not recommended. As you
are aware with the fact that the fabric of the cap is quite thick and it is further made thick with
backing thickness so, small needles don’t serve the purpose and there is a possibility of its
Different Fabrics Use:
There is much little choice available for the digitizing company as well as embroidery in terms
of fabric. This is what said by the customers but this is not the case at all. You have come up
with the large number of variables that you are going to control in order to get the smooth sew
over any type of fabric that you are using. When you are using the unstable or the slippery
fabric then it means that you should use solid underlay which will provide the most stable