Installing Ethernet Cables? Keep
These Things in Mind!
In today’s world of Internet of Things and Industrial Automation,
the utility of Ethernet Cables has become inevitable. According to
the concept of Internet of Things, even the everyday objects have
network connectivity, which enables them to send and receive
data. But in order to make the data exchange smooth, it is
important to install Ethernet Cables properly.
By doing so, you will be able to decrease the downtime and enable
the exchange of data between your data systems and network
devices like modems, routers, adapters and other objects that ask
for a connection. If you are installing Ethernet Network Cables, you
need to keep certain things in mind.
How to plan for Ethernet Cable Installation?
Once you have decided the place where all your cables will
terminate, you can plan your Ethernet cable installation. You must
remember that the location for your cables should be big enough
to accommodate your ongoing project. Also consider the future
data network expansion plans in your plant.
In case your cable is going to be exposed to extreme environmental
conditions, select a cable which is flexible and resistant to UV light,
oil, chemicals, cutting, abrasion, oil etc. Thereafter, you need to
take the following steps:
❖ Choosing an Ethernet Cable
Before choosing networking cables for yourself, you need to know
the features of each Ethernet cable. Details of each of these cables
are given below.
CAT5E: CAT 5E cables can replace CAT5 and CAT3 and support up
to 100Mbps at 100MHz. It also curbs cross talk and offers good
CAT6: CAT 6 cables are backward compatible with the previous
version of CAT cables, can be run in long lengths, have bigger gauge
wires and support up to 10 Gb/s at 250 MHz bandwidth. CAT6
cables are also longer lasting. CAT 6A cables on the other hand
enhances the capacity of CAT6 as it can perform up to 500Mhz and
can cover distances up to 100 meters.
CAT 7A: This type of Ethernet Cable is a good alternative to fiber
optic cabling. It supports 10 Gigabit Ethernet and frequencies of up
❖ Things To Keep in Mind
While you are installing Ethernet Cables, Keep the following things
1. Cross Power the Cable at 90 degrees: In case you have to cross
the data network cabling, keep it at a 90º degrees and you can
2. Don’t pack them together: If the cables are kinked, they can
affect the network and compromise with the quality of cables. So
try not to create a snake pit out of it.
3. Go for different colours: Choose different colours for different
cables so that there is no confusions and your data lines can remain
4. Keep the cables away from risky places: In case if you are
running the cable through ceiling or wall, ensure that it doesn’t
come in contact with the ceiling tiles. Also, don’t run it over water
pipes and electrical conduit as it is dangerous and might cause
5. Make use of an efficient wire management system: It is
important to organize patch cabling between the racks. To organize
efficiently, you can use wire bundling device or cable ties or Velcro.
Keep the above mentioned points in mind and start
installing your Ethernet cables at the earliest.
See More Products Here: