ELECTRONIC FLUORESCENT BALLASTS

Document technical information

Format pdf
Size 1.9 MB
First found Jun 9, 2017

Document content analysis

Language
English
Type
not defined
Concepts
no text concepts found

Persons

Organizations

Places

Transcript

ELECTRONIC FLUORESCENT BALLASTS
General Information
Page 3-1 to 3-20
Compact Fluorescent Lamps
Page 3-21 to 3-29
CFL
2D
Long Twin
Tubes
Page 3-21 to 3-24
Page 3-25
Page 3-27 to 3-29
Linear Fluorescent Lamps
Page 3-30 to 3-62
T5
T5 and T5HO
Circline
T5HO
Page 3-30 to 3-31
Page 3-32
Page 3-33 to 3-34
T8
T8 Slimline
T8HO
Page 3-38 to 3-57
Page 3-58
Page 3-59
T12
T12 Slimline
T12HO
Page 3-60
Page 3-61
Page 3-62
Speciality Fluorescent Lamps
Corporate Offices
(800) 322-2086
UV Disinfection
Refrigeration
Page 3-63
Page 3-64
Customer Support/Technical Service
(800) 372-3331 • (+) 1 847 390-5000 (International)
Visit our web site at www.philips.com/advance
1
Page 3-63 to 3-64
Atlas Full Line Catalog 2014-2015
Note: Refer to page 9-7 to 9-14 for Ballast Specifications
ELECTRONIC FLUORESCENT BALLASTS
Fluorescent Ballasts - Electronic - Centium
Electronics Ballasts for T5, T8, T12 and Long Twin Tube Fluorescent Lamps
Reliable and robust, this broad line of Centium high
frequency electronic ballasts for T5, T5HO, T8 and
T12 fluorescent lamps offers all of the necessary
commercial grade specifications plus the added
benefits of lamp striation reduction technology
making these ballasts compatible with energy saving
T8 lamps. This provides your customers with a
better energy saving solution than when using
standard T8 ballast.
Our Centium ballasts are an optimal choice for a
broad range of new construction and retrofit
applications within the commercial sector including
general office lighting, conference, meeting, and board
room applications, indirect and decorative lighting,
and new fixture designs requiring smaller ballasts.
The following ballasts are NEMA Premium®:
ICN1P32N
ICN2P32N
ICN3P32N
ICN4P32N
Ballasts for T5 Fluorescent Lamps Are Now Available
in a Smaller Can
Philips Advance Centium ballasts for T5 lamps are
now available with our industry leading N-can at 9.5”L
x 1.3”W x 1.0”H or T-can at 14.17”L x 1.18”W x
1.06”H, which provides fixture manufacturers increased
versatility in their newer generation fixture designs.
Setting Industry Standards for Ballast Efficiency
The National Electrical Manufacturers Association (NEMA) has
created this program to help lighting professionals and end users
recognize the market’s highest-performing ballast products. A
selection of Centium ballasts meet these requirements.
Benefits
As a licensee in the NEMA Premium Ballast Program, Philips Lighting Electronics N.A. has determined that
these products meet the NEMA Premium specification for premium energy efficiency.
Atlas Full Line Catalog 2014-2015
3-1
ELECTRONIC FLUORESCENT BALLASTS
Fluorescent Ballasts - Electronic - Optanium
High-efficiency electronic ballasts for a broad range of T5 and T8 lamps
Optanium ballasts for T5 and T8 lamps are part of
our effort to promote environmental responsibility
through Smart Solutions - energy efficient products,
lighting systems, services and expertise through Philips
Advance branded products. They are also one of
the charter products of the NEMA Premium® Ballast
Program. All of this makes these ballasts part of an
overall high-efficiency lighting system that may help
you achieve LEED certification, meet ASHRAE
standards, become compliant with California Title 24
Energy Efficiency Standards, or any other local energy
code applicable to you or your customers.
Optanium ballasts will help you and your customers
meet a variety of application challenges including
luminaire design, installation, maintenance, and
evolving lamp technology. Optanium ballasts are
available in a standard light output, low-watt, and a
high light output design. Also these ballasts come in
options with cold-starting capability down to -20°F
(with standard fluorescent lamps). These two features
combined make it ideal for just about any T5 or
T8 fixture design and application. These ballasts are
available in either instant start or programmed start
ignition for extended lamp life in frequent switching
applications such as those where occupancy sensors
or motion detectors are being used. Optanium ballasts
are also available in program start with parallel wiring.
The following ballasts are NEMA Premium®:
IOP-3P32-HL-N
IOPA-2P32-HL-N
IOP-1P32-N
IOPA-3P32-N
IOP-1P32-LW-N IOP-4P32-N
IOP-4P32-LW-N
IOPA-3P32-LW-N
IOP-2P32-N
IOPA-3P32-HL-N
IOP-2P32-LW-N IOP-4P32-HL-SC
IOPA-1P32-N
IOPA-4P32-N
IOP-2P32-HL-N
IOPA-1P32-LW-N IOPA-4P32-LW-N
IOP-3P32-N
IOP-4P32-HL-SC
IOP-3P32-LW-N IOPA-2P32-N
As a licensee in the NEMA Premium Ballast Program, Philips Lighting Electronics N.A. has determined that
these products meet the NEMA Premium specification for premium energy efficiency.
3-2
Atlas Full Line Catalog 2014-2015
Setting Industry Standards for Ballast Efficiency
As a charter product in the NEMA Premium®
Ballast Program, Optanium ballasts are recognized
as supporting energy-efficient lighting objectives. The
National Electrical Manufacturers Association (NEMA)
has created this program to help lighting professionals
and end users recognize the market’s highest-performing
ballast products.
Striation-reduction technology
Reduces the likelihood of striation often associated with
energy-saving lamps, for consistent light output
Cold temperature lamp ignition down to -20°F for instant
or program start ballasts
Brings energy-efficient T5 and T8 performance to a variety
of new applications such as parking garages, warehouses, and
cold storage areas
Arc-reduction technology — UL Type CC
UL Type CC* (on certain ballasts)
Program start parallel (PSP)
Program start ballasts with parallel wiring delivers
independent lamp operation preventing premature lamp
shut down ultimately reducing maintenance
High efficiency design
Help maximize energy savings with improved ballast efficiency
* When operating standard non-energy saving lamps
ELECTRONIC FLUORESCENT BALLASTS
Fluorescent Ballasts - Electronic - SmartMate
Electronic Ballasts for 4-Pin Compact Fluorescent Lamps
Offering maximum versatility, the Philips Advance
family of SmartMate electronic ballasts for 4-pin
compact fluorescent lamps drive a broad range of
quad and triple-tube, circline, 2D, and long twin-tube
lamps. Representing an innovative breakthrough
in CFL ballast technology, SmartMate Ballasts’
energy-efficient design, compact and lightweight
housing, and user-friendly features make SmartMate
Ballasts an ideal choice for fixture manufacturers,
retrofitters, and MRO replacement.
Dual-entry connector
Reduces SKU requirements and inventory costs, as unit can
be used with side or bottom exit leads
Color-coded, poke-in terminals
Enhances wiring accuracy and ease of assembly/installation
Operation between 42kHz and 52kHz
Eliminates interference with infrared systems, anti-theft
devices, or other electronic equipment
Lamp End-Of-Life Protection Circuit
Removes power to lamps upon lamp failure
SmartMate Ballasts are ideal in such applications as
restaurants, reception areas, conference and meeting
rooms, hotel and convention center ballrooms, and
houses of worship, as well as in place of incandescent
down-lighting systems.
We also offer our distribution partners a way to
eliminate the need to stock loose components with
SmartMate Ballast Replacement Kits
Conveniently-packaged these kits come complete
with a Philips Advance SmartMate Ballast, a mounting
plate adaptor, lead wire, and a wire extraction tool for
the ultimate in ease and versatility. See page 3-20 for
details on kits.
Atlas Full Line Catalog 2014-2015
3-3
ELECTRONIC FLUORESCENT BALLASTS
Fluorescent Ballasts - Electronic - AmbiStar
Residential Ballasts for 4-pin CFL, T8 or T12 Lamps
Today’s fixed and dimmable fluorescent fixtures offer
greater flexibility and energy savings for residential and
hospitality settings than ever before, thanks to Philips
Advance AmbiStar electronic ballasts. No matter
what type of fluorescent lighting you’re considering,
these ballasts help create warm, inviting interiors while
providing Class B FCC EMI Rating – a requirement
for the ENERGY STAR Luminaires Specification.
AmbiStar ballasts feature sleek, compact designs
to fit in today’s stylish fixtures. AmbiStar ballasts
deliver quiet, flicker-free performance, which
makes them perfect for any residential or hospitality
setting. Fluorescent lighting isn’t just for garages
and basements anymore.
3-4
Atlas Full Line Catalog 2014-2015
Class B FCC EMI Rating
Requirement for ENERGY STAR Luminaires Specification
for fixtures
Title 24 Energy Efficiency Requirements
Enables California’s Title 24 Residential Lighting Energy
Efficiency standards with applicable luminaire design
Electronic circuitry
Enable ballast to run cooler and operate quieter than many
magnetic ballast alternatives.
Fast Start Times
Flicker free ignition starts in less than 1.0 second to meet EPA
ENERGY STAR Requirements for Residential Lighting Fixtures
ELECTRONIC FLUORESCENT BALLASTS
Fluorescent Ballasts - Electronic - PureVOLT
Electronic Ballasts for High Output (HO) Germicidal Ultraviolet (UV) Lamps
In support of the growing popularity of High Output
(HO) germicidal UV-C lamps – which have been
effective at improving indoor air quality in low
temperature environments such as HVAC systems
– Philips Advance PureVOLT electronic UV ballast is
specially designed to operate a variety of 800mA HO
UV lamps. PureVOLT is ideal in such applications as
hospitals, food processing facilities, schools, office
buildings, recreational facilities, and residences.
Microprocessor-controlled design
Enables one UV ballast to operate multiple lamps
IntelliVolt multiple-voltage technology enables operation
from 120 to 277V, 50/60 Hz
Features
Enhances accuracy of ordering and reduces
SKU requirements
Lamp End-Of-Life Protection Circuit
Removes power to the lamp upon lamp failure
Auto-restart
Eliminates the need to reset power mains after
lamp replacement
Programmed-start technology
Provides extended lamp life in frequent switching applications
Features
Atlas Full Line Catalog 2014-2015
3-5
ELECTRONIC FLUORESCENT BALLASTS
Electronic Ballast Fundamentals
The job of a ballast
In all fluorescent lighting systems, the ballast’s basic tasks include:
• Providing the proper voltage to establish an arc
between the two electrodes.
• Regulating the electric current flowing through the
lamp to stabilize light output.
In some fluorescent lighting systems, the ballast also provides a
controlled amount of electrical energy to preheat or maintain
the temperature of the lamp electrodes at levels specified by
the manufacturer. This is required to prevent electrode filaments
deteriorating prematurely and shortening the lamp life.
Starting Methods
For many years there were only three types of lighting systems:
preheat, rapid start and slimline instant start. With the introduction
of electronic ballasts, two additional types of lighting system circuits
have been added: instant start and programmed start for T8 lamps.
Each requires a special ballast design to operate the lamps in the
circuit properly.
Instant start electronic ballasts start lamps without delay (<0.1
second) or flicker by providing a starting voltage that is sufficiently
high to start a discharge through the lamps without the need for
heating lamp electrodes. For F32T8 systems, the starting voltage is
about 600V. The elimination of electrode heating helps maximize
energy savings — typically saving 2W per lamp compared to rapid
start ballasts1. Instant start ballasts are best suited for applications
with limited switches each day. Lamps operated by instant start
ballasts typically operate 10,000 to 15,000 switch cycles before failure.
Rapid start electronic ballasts start lamps quickly (0.5 — 1.0 second)
without flicker by heating the lamp electrodes and simultaneously
applying a starting voltage. The starting voltage of about 500V for
F32T8 systems is sufficient to start a discharge through the lamps
when the electrodes have reached an adequate temperature.
Electrode heating continues during operation and typically consumes
2W per lamp. Lamps operated by rapid start ballasts typically
operate 15,000 to 20,000 switch cycles before failure.
Programmed start electronic ballasts also start lamps quickly
(1.0 -1.5 seconds) without flicker. Programmed start ballasts
are designed to maximize lamp life in frequent lamp starting
applications such as in areas where occupancy sensor controls
are used. Programmed start electronic ballasts precisely heat the
lamp electrodes, tightly controlling the preheat duration before
applying the starting voltage. This enhancement over rapid start
ballasts helps minimize electrode stress and depletion of emitter material,
thereby maximizing lamp life. Lamps operated by programmed start
ballasts typically operate up to 100,000 switch cycles before failure.
.The Language of Ballasts
Input Voltage (dedicated vs. multi). Most ballasts are designed to
operate at specific voltages. Newer electronic ballasts, including Philips
Advance models that use IntelliVolt technology, offer much greater
flexibility and other advantages such as inventory reduction. Today’s
increasing demands on electrical utilities can cause wide voltage
variations during load demand changes which in turn cause light
output from lamps operated on dedicated electronic and
electromagnetic ballasts to vary with the input voltage changes.
With IntelliVolt technology, many Philips Advance ballasts maintain
constant light output through nominal input voltage ranges of 120
to 277 volts, thereby compensating for any change in input voltage.
Some ballasts operate from 277 to 480 volts or 347 to 480 volts.
Input Watts/ANSI Watts. Input watts published by ballast
manufacturers are the total watts consumed by both the ballast
and the lamps it operates. ANSI watts are the rating given for a
ballast measured under the strict testing procedures specified by
ANSI standards and are a dependable measure of this lamp/ballast
performance. Energy savings can be determined by comparing the
input watts of different lighting systems.
Input watts may be affected by tolerance build-up from the ballast,
lamp, input voltage and ambient temperature. The input watts
published in this catalog are for nominal conditions only.
Ballast Factor (BF) is the ratio of light output from a lamp operated
on a commercial ballast to the light output of that same lamp
operated on a “reference ballast” as specified by ANSI standards.
Light output ratings published by lamp manufacturers, are based on
this “reference ballast”.
BF =
light output of lamp operated on commercial ballast
light output of lamp operated on reference ballast
Ballast Efficacy Factor (BEF) is the ratio of ballast factor to input
watts. This measurement is generally used to compare the efficiency
of various lighting systems — higher numbers being more efficient.
Ballast Efficacy Factor =
Ballast Factor x 100
Input Watts
This comparison is only valid, however, for ballasts operating the
same number and type of lamps. In order to compare different
types of lighting systems, the lumen output of the lamps must also
be used.
Ballast Luminous Efficiency (BLE) is the ratio of total lamp arc
power to input watts. This is a new metric based solely on
electrical measurements.
Circuits
Series vs. Parallel. Lighting systems are typically wired in a series or
parallel circuit. When a ballast is operating multiple lamps in a series
circuit, if one lamp fails, the circuit is opened and all the lamps will
extinguish. When a ballast operates multiple lamps in a parallel
circuit, the lamps operate independently of each other so, if one
lamp fails, the others can keep operating as the circuit between
them and the ballast remains unbroken.
3-6
Atlas Full Line Catalog 2014-2015
BLE =
See footnote on page 3-65
Total Lamp Arc Power
Input Watts
ELECTRONIC FLUORESCENT BALLASTS
Power Factor (PF) is the measurement of how effectively a
ballast converts the voltage and current supplied by the power source
into watts of usable power delivered to the ballast and lamps. Perfect
power utilization would result in a power factor of one.
Input Watts
PF =
Input Current x Input Voltage
A ballast’s power factor may be classified under any one of the
following categories:
High Power Factor (HPF)
0.90 or greater
Power Factor Corrected (PFC)
0.80 to 0.89
Normal (Low) Power Factor (NPF)
0.79 or less
Power factor measurements pertain only to the effective use of
power supplied to the ballast. They are not an indication of the
ballast’s ability to supply light through the lamps. Because low power
factor ballasts require about twice the current needed by high power
factor ballasts, they allow fewer fixtures per circuit and create added
wiring costs. High power factor ballasts are generally specified for all
commercial lighting applications.
EMI/RFI. Because they operate at high frequency, electronic ballasts
may produce electromagnetic interference (EMI) or radio frequency
interference (RFI). RFI frequencies are a subset of EMI frequencies.
EMI issues cover all possible operating frequencies while RFI is only
concerned with radio and television frequencies. This interference
could affect the operation of sensitive electrical equipment, such
as radios, televisions or medical equipment. All Philips Advance
electronic ballasts incorporate features necessary to afford maximum
protection for the operating environment and operate well within
regulatory limits.
Ballast Noise. The slight “humming” sound associated with
fluorescent lighting systems results from vibration caused by the
inherent electromagnetic action in the core-and-coil assembly of the
ballasts. All electromagnetic and some electronic ballasts make this
sound. Ballasts are assigned a sound rating, “A” through “F”, based
on the amount of sound produced, with “A” being the
quietest. Generally, the larger the lamp and ballast, the higher the
sound level and the sound rating will be. Because electronic
ballasts have smaller components, they have the lowest sound
rating. Some electronic ballasts make almost no sound. There is no
ANSI standard for this rating and it is left up to the manufacturer to
rate their ballasts.
Inrush Current. All electrical devices including ballasts have
an initial current surge that is greater than their steady-state
operating current. A standard published by the National Electrical
Manufacturers Association (NEMA) — NEMA 410 — Performance
Testing for Lighting Controls and Switching Devices with Electronic
Fluorescent Ballasts — covers worst-case ballast inrush currents. All
circuit breakers and light switches are designed for inrush currents.
The electrical system should be designed with this issue in mind.
Total Harmonic Distortion (THD). Harmonic distortion occurs when
the wave-shape of current or voltage varies from a pure sine wave.
Except for a simple resistor, all electronic devices, including electromagnetic and electronic ballasts, contribute to power-line distortion.
For ballasts, THD is generally considered the percent of harmonic
current the ballast adds to the power distribution system. The ANSI
standard for electronic ballasts specifies a maximum THD of 32% for
commercial applications.. However, most electric utilities now require
that the THD of electronic ballasts be 20% or less. Almost all Philips
Advance electronic ballasts are rated for either less than 20% THD or
less than 10% THD.
Phase A
Actual Waveform
Third Harmonic
(180Hz)
Phase B
Low Current
Neutral Wire
If low Third Harmonic
on balanced system
Phase C
Phase A
60 Hz Sine
Wave
Phase B
100% Plus Current
Neutral Wire
(Overheated)
Third
Harmonic
Phase C
Indicates ballast is listed with Underwriters Laboratories,
Inc. and complies with UL935 Standard for Fluorescent
Lamp Ballasts (File No. E14927).
Visit www.ul.com to find a current listing of Philips Advance
ballasts under File No. E14927.
Indicates ballast is certified by Canadian Standards
Association and complies with CSA C22.2 No. 74
Standard for Fluorescent Lamp Ballasts (File No.
007310)
Visit www.csa-international.org to find current listing of Philips
Advance ballasts under File No. 007310.
Normal Input
Voltage
Catalog Number
Prefix Code
Label Color
Coding
120V
R
Yellow
277V
V
Red
347V
G
Grey
120V to 277V
I
Blue
347V to 480V
H
Purple
Indicates ballast complies with directive 2002/95/EC
Restriction of Hazardous Substances
Atlas Full Line Catalog 2014-2015
3-7
ELECTRONIC FLUORESCENT BALLASTS
Total Harmonic Current
Non-Dimming Applications
When selecting a ballast for a lighting application, the Total
Harmonic Current (THC) rating of the ballast is more significant
than Total Harmonic Distortion (THD). This is because the
absolute value of harmonic current, not the percentage, affects
the electrical power distribution system. As can been seen in the
table below, the THC rating of our Standard 2-lamp electronic
T8 lamp ballast (REL-2P32-SC) is well below that of both the
conventional (RQM-2S40-TP) and energy-saving magnetic T12
lamp ballasts (R-2S40-TP) it replaces. Moreover, the THC rating
of our Centium electronic ballast is even lower.
Dimming Applications
Mark 7 0-10V and ROVR
Traditional low voltage controlled ballasts and ROVR typically
produce less than 10% THD at full light output and less than
20% THD throughout the entire dimming range, but require extra
wires for the control circuit. THC is lower than that of the
conventional or energy-saving magnetic system.
Mark 10 Powerline
Mark 10 Powerline electronic dimming ballasts are controlled
by 2-wire modified powerline phase-cut style line voltage
dimmers. Whenever the ballast is dimmed, the input voltage
is cut or “chopped”, causing the THD to increase and the Power
Factor to decrease.
Mark 10 Powerline electronic dimming systems (ballast and controller)
have similar THD and Power Factor levels as the conventional
lighting systems they replace. Since a much smaller load is required
by the Mark 10 Powerline electronic dimming system to achieve the
same illumination level as a magnetic ballast system (20-30% less), the
total input current will be considerably less. As a result, the magnitude
of the total harmonic current will be less.
For example, a typical Mark 10 Powerline electronic ballast and
dimmer control might draw a line current of 0.58A at 15% THD at
full light output. If the light level is reduced to 5% of the maximum,
the input power is decreased to 0.19A at 95% THD. While the
THD level may seem high at the 5% maximum light output
setting, the total harmonic current is still lower (0.13A) than
the conventional T12 magnetic system (0.20A). Moreover,
the overall heating effect on the wires and the distribution
transformer is not higher than the existing conventional or
energy saving T12 magnetic systems.1
Conclusions
A simple ballast retrofit to electronic ballasts should not cause
harmonic problems if none existed before the retrofit. Also, in
new fixture applications, total harmonic distortion should not be a
concern when specifying electronic ballasts. Finally, it is important
to remember that electronic ballasts are not the greatest source of
THD in an electrical distribution system. Other electronic devices
such as computers, laser printers, and other electronic equipment
can draw current with more than 100% THD in some cases.
Table 1: Comparison of THD and THC Levels
Philips Advance
Part No.
1
3-8
Ballast
Type
Light Output
Setting
Lamp
Type
Input
Current
% THD
THC2
RQM-2S40-TP
Conventional
Magnetic
100% (Ballast
Factor is 0.98)
(2) F40T12
0.84A
<25%
0.20A
R2S40-TP
Energy Saving
Magnetic
100% (Ballast
Factor is 0.95)
(2) F34T12
0.63A
<20%
0.12A
REL-2P32-SC
Standard
100% (Ballast
Factor is 0.88)
(2) F32T8
0.49A
<20%
0.10A
ICN-2P32-N
Centium
100% (Ballast
Factor is 0.88)
(2) F32T8
0.49A
<10%
0.05A
IZT-2S32-SC +
Dimming Contro­­l
Mark 7 0-10V
100% (Ballast
Factor is 1.0)
(2) F32T8
0.57A
<10%
0.05A
IZT-2S32-SC +
Dimming Control
Mark 7 0-10V
5% (Ballast
Factor is 0.05)
(2) F32T8
0.12A
<20%
0.02A
REZ-2S32-SC
(Ballast Only)
Mark 10 Powerline
100% (Ballast
Factor is 1.0)
(2) F32T8
0.58A
<10%
0.06A
REZ-2S32-SC +
Dimming Control
Mark 10 Powerline
100% (Ballast
Factor is 1.0)
(2) F32T8
0.58A
<15%
0.09A
REZ-2S32-SC +
Dimming Control
Mark 10 Powerline
5% (Ballast
Factor is 0.05)
(2) F32T8
0.19A
<95%
0.13A
Electronic
Electronic
Electronic
Electronic
Electronic
Ballast + Dimmer
Ballast + Dimmer
For a more technical study comparing the a Mark 10 Powerline electronic dimming system
to an energy saving magnetic system that it replaces, see the article Total Harmonic Distortion
in Philips Advance Mark 10 Powerline Electronic Dimming Systems by O.C. Morse.
Atlas Full Line Catalog 2014-2015
2
The Total Harmonic Current (THC) of a ballast is calculated by the following equation:
An approximation of THC may be obtained by simply multiplying the ballast input current by %THD.
Ballast Input Current
Square Root of (1 + 1/THD2)
ELECTRONIC FLUORESCENT BALLASTS
Ballast Life
Philips Advance fluorescent electronic and magnetic ballasts are
designed and manufactured to engineering standards correlating to
an average life expectancy of 50,000 hours of operation at maximum
rated case temperature2. Since Philips Advance ballasts operate
below their maximum case temperature in the majority of applications,
increased ballast life can be expected. As a rule of thumb, ballast life
may be doubled for every 10°C reduction in ballast case operating
temperature. However, there are many variables, such as input
voltage, ambient temperature, etc. which affect ballast operating
temperatures, and therefore ballast life.
Lamp Operating Frequency
Electromagnetic ballasts and the lamps connected to them operate
at an input voltage frequency of 60 Hertz (Hz), 60 cycles per
second — which is the standard alternating voltage/current frequency
provided in North America. Electronic ballasts, on the other hand,
convert this 60 Hz input to operate lamps at much higher
frequencies above 20 Kilohertz (kHz), 20,000 cycles per second.
Philips Advance ballasts operate above 20 kHz, but avoid certain
ranges such as 30-40 kHz (infrared) and 54-62 kHz (theft deterrent
systems) due to interference issues.
Because electronic ballasts function at high frequency, the fluorescent
lighting systems that they operate can convert power to light more
efficiently than systems operated by electromagnetic ballasts (See
chart below). For example, lamps operated on electronic ballasts
can produce over 10 percent more light then if operated on
electromagnetic ballasts at the same power levels. In effect, today’s
electronic ballasts provide additional energy savings by matching the
light output from electromagnetic ballasts while operating the lamps
at lower power. This is the main reason why electronic ballast systems
are more efficient than magnetic ballast system.
electromagnetic models. Almost all Philips Advance electronic
ballasts have a smaller cross-section than electromagnetic ballasts
but maintain the same mounting dimensions. This means that they
can fit into all new fixture designs and can be easily retrofitted into
existing fluorescent lighting systems.
Controllability
The ability of a building’s occupants to control how they light their
space is becoming an increasingly important factor for organizations
in determining what real estate they will lease, buy or invest in.
The ability to dim the lights or easily shut them off completely is a
trend fueled not just by a desire to help the environment, but also
by significant economic benefits. These benefits include greater
energy efficiency — in terms of reduced HVAC costs as well as
energy savings for lighting — more comfortable and productive
working environments, and compliance with ever tighter energy
efficiency regulations. Philips Advance offers four families of
electronic controllable ballasts — ROVR, Mark 7 0-10V,
Mark 10 Powerline, PowerSpec HDF.
Compatibility With Powerline Carrier Systems
A powerline carrier system (PLC) uses electronic wiring devices to
send information via a high frequency signal over the 120V or 277V
electrical power distribution system of a building. For example, PLC
systems are used in automatic clock systems (master time systems)
to synchronize all of the clocks in a building or reset the time after a
power outage. They eliminate the need for maintenance personnel
to reset hundreds of clocks throughout a facility.
In a PLC system, a generator is used to impose a 1 to 4V high frequency signal on top of the existing voltage sine wave (60 Hz). This
signal is generally in the 2500 to 9500Hz range, with some older
systems operating at 19,500Hz or higher. Some electronic ballasts
which are capacitive can absorb the signal from a PLC system. As a
result, the signal becomes too weak to be “heard” by the receiver
(like a timeclock) connected to the powerline.
Instant Start vs. Rapid Start Sockets for Dimming
Crest Factor
Lamp manufacturers use crest factor to determine ballast
performance as it relates to lamp life. Lamp Current Crest Factor
is a measurement of current supplied by a ballast to start and
operate the lamp. It is basically the ratio of peak current to RMS
(average) current. High crest factor currents may cause the lamp
electrodes to wear out faster, reducing lamp life. Crest factor
requirements are regulated by ANSI (American National Standards
Institute) standards and specified by lamp manufacturers. For rapid
start and instant start T8 lamps
the ratio is 1.7 maximum, and for
I Peak
I R.M.S.
instant start slimline lamps, it is 1
.85 maximum.
I
Peak
Crest Factor =
I R.M.S.
Weight and Size Advantages
Since electronic components in electronic ballasts are smaller and
lighter than the core-and-coil assembly in electromagnetic ballasts,
electronic ballasts can weigh less than half as much as comparable
When using dimming ballasts in fixtures, sockets must be of the
Rapid Start type. Many fixtures with T-8 Instant Start electronic
ballasts use jumpered or “shunted” Instant Start sockets. Controllable
ballasts require two distinctly separate wires for each lamp socket. If
you encounter shunted or jumpered sockets in a retrofit application,
they must be removed and replaced with Rapid Start sockets.
Improper socket application will damage the ballast and void the ballast warranty.
Refer to ballast wiring diagram for proper installation.
Rapid Start Sockets
Color
‘A’
Color
‘A’
YES
Instant Start Sockets
Color
‘A’
Shunted
Jumpered
NO
NO
Color
‘A’
NO
Fluorescent Lamp Burn-In
Today, most lamp manufacturers do not require the burn-in of
linear fluorescent lamps prior to dimming in order to attain rated
lamp life and stable electrical measurements. However, some
manufacturers of compact fluorescent lamp sources do require a
100 hour burn-in prior to dimming. Consult your lamp manufacturer
for their latest requirements.
See footnote on page 3-65
Atlas Full Line Catalog 2014-2015
3-9
ELECTRONIC FLUORESCENT BALLASTS
Ordering Information
How to Order
Philips Lighting has developed the industry’s broadest distribution system for electronic ballasts. More than 3000 stocking distributors
nationwide. For information on the distributor best able to serve your needs, please call 800-372-3331.
Electronic Ballast Part Number Breakdown
I CF
–
2 S 26
–
H1
–
LD
CFL Mounting/Connector Options
BL = Bottom leads
BLS = Bottom leads with mounting studs
BS = Bottom mounting studs with single entry color coded connectors
EL = End leads
LD = Length mounting feet with SmartMate® dual entry color coded connectors
QS = QuikStart
Linear Fluorescent Mounting/Connector Options
2LS = 2 Level Switching
SD = Step Dimming
CFL Can Description
H1 = Hybrid metal / plastic case, size 1
M1 = Metal case, size 1
M2 = Metal case, size 2
M3 = Metal case, size 3
M4 = Metal case, size 4
M5 = Metal case, size 5
M6 = Metal case, size 6
Linear Fluorescent Can Description
90C = 90°C maximum case temperature rating
A = ‘A’ can
D = ‘D’ can
G = ‘G’ can
HL = High light output
L = ‘L’ can
LW = Low watt
MC = Micro can
N = ‘N’ can
SC = Small can
T = ‘T’ Can
Corporate Offices
(800) 322-2086
Customer Support/Technical Service
(800) 372-3331
(+) 1 847 390-5000 (International)
Visit our web site at
www.philips.com/advance
Lamp Watts (Primary lamp)
Wiring Configuration
D = 2D, series
M = Modified parallel**
P = Parallel
PSP = Programmed Start Parallel
Q = Quad CFL, series
S = Series
T = Triple CFL, series
TTS = L ong twin tube, series
TTP = L ong twin tube, parallel
Maximum Number of Lamps
Family Name
CF = Compact Fluorescent DA = ROVR
EB = AmbiStar
EZ = Mark 10® Powerline
OP = Optanium
ZT = Mark 7® 0-10V
CN = Centium
DL = ROVR
ELB = AmbiStar
MB = AmbiStar
UV = PureVolt
• Plan your lighting installation carefully; consider
using the services of a qualified lighting designer
• Consult your local electric utility regarding demand
side management rebate programs.
• Select the Philips Advance electronic ballast which
best matches the requirements of your application.
The technical specifications in this catalog (located
on pages 9-7 to 9-14) will be useful in obtaining
bids from electrical contractors.
• Contact your local Philips Lighting distributor.
You will find them to be a helpful supplier of
both products and information.
Input Voltage
G = 347V
H = IntelliVolt 347V to 480V 50/60 Hz
I = IntelliVolt 120V to 277V 50/60 Hz
R = 120V
V = 277V
* Many current and all future electronic ballast part numbers will not use the “RH-TP” suffixes even though these ballasts will be thermally protected.
** Parallel Wiring Configuration. However, if one lamp fails, all other lamps in the circuit will extinguish.
3-10
Atlas Full Line Catalog 2014-2015
ELECTRONIC FLUORESCENT BALLASTS
Remote, Tandem or Through Wiring Distances
Remote Mounting of Electronic Ballasts
Unlike magnetic ballasts, electronic ballasts are limited in remote
mounting distance from the lamps they operate. The factors
limiting the distance from the electronic ballasts to the lamps are:
open circuit voltage as opposed to operating voltage, operating
frequency and the lamp operating current.
As the distance from the high frequency electronic ballasts to the
lamp increases, so does the capacitance across the lead wire to the
lamp. This increase in capacitance is important for two reasons.
First, if the capacitance is too high, there will not be sufficient open
circuit voltage across the lamp for proper lamp ignition.
Second, if the lamp is capable of ignition, the increased capacitance
will cause a loss in the current to the lamp. The added capacitance
creates what is known as a “shunt” around the lamp; in other words
the current will leak from the red wire (or blue) to the yellow,
completely bypassing the lamp. The current through the lamp will be
reduced, resulting in lower lumens, with the possibility that the lamp
will not be capable of sustained operation.
The Mark 7 0-10V, Mark 10 Powerline, PowerSpec HDF, and ROVR
dimming ballasts are particularly sensitive to high capacitance associated with long lead wires. The dimming ballast is capable of very low
dim levels because constant filament heat is provided to the lamp. If
there is any loss of current, the filament current will be reduced and
the lamp will begin to flicker, or it will be completely extinguished. It
is also important that the red and blue leads not be twisted together. Twisting the red and blue leads will add capacitance, causing the
lamp to flicker at the lower dimming levels.
Open circuit voltage is a function of input voltage in some ballast
designs, particularly for dedicated voltage ballasts. Cold temperature
starting is a function of open circuit voltage. The lead length
recommendations in the following table are for normal rated input
voltages (120V, 277V, 347V) at 25°C ambient temperature.
In summary, there is a wide range and varying types of electronic
ballast architectures that are capable of being remote mounted for
an equally wide range of distances. If you are uncertain of the remote
mounting restrictions for a particular electronic ballast please consult
Philips Lighting Customer Care (Warranty/Technical Service)
Remote Wiring
BALLAST FOR A
SINGLE LUMINAIRE
LAMP
LAMP
OUTPUT LEADS IN CONDUIT
LAMP
Luminaire may contain
various lamp quantities,
but is operated by
one remote ballast
Note: Recommended output lead lengths and remote mounting distances
should not be exceeded.
Atlas Full Line Catalog 2014-2015
3-11
ELECTRONIC FLUORESCENT BALLASTS
Tandem Wiring
LAMP A1
LAMP A3
4-lamp ballast
operating ‘A’ lamps
LAMP B1
2-lamp ballast
operating ‘B’ lamps
LAMP A2
For dimming applications, to decrease
lamp output variability when in the
dim mode, it is preferred to add a
second conduit and divide output
wires between the two conduits.
LAMP B2
LAMP A4
Conduit for
running output lead wire
to adjacent luminaire
2 BALLAST EXAMPLE
BALLAST ‘A’ OPERATES OUTBOARD LAMPS
BALLAST ‘B’ OPERATES INBOARD LAMPS
(2) 3-lamp luminaires shown as an example,
but this would also be applicable for any
luminaire containing 2-lamps or more
LAMP C2
LAMP C1
2-lamp ballast
operating ‘C’ lamps
Conduit for
running output lead wire
to adjacent luminaire
1 BALLAST EXAMPLE
Through Wiring
LAMP
LAMP
LAMP
LAMP
4-lamp ballast
OUTPUT WIRES
4 - LAMP BALLAST
Fixture is the wireway.
Output leads are not run in conduit.
LAMP
LAMP
LAMP
3-lamp ballast
OUTPUT WIRES
3 - LAMP BALLAST
Fixture is the wireway.
Output leads are not run in conduit.
LAMP
LAMP
2-lamp ballast
OUTPUT WIRES
Note: Ballast should be mounted at
center of fixture to minimize lead lengths.
Recommended output lead lengths and
remote mounting distances (pages 3-14 to
3-18) should not be exceeded.
2 - LAMP BALLAST
Fixture is the wireway.
Output leads are not run in conduit.
Diagrams are also aplicable for multiple lamp
cross-section luminaires. For example,
an 8-foot luminaire with two lamps in cross section
and a single 4-lamp ballast.
3-12
Atlas Full Line Catalog 2014-2015
ELECTRONIC FLUORESCENT BALLASTS
Philips Fluorescent Dimming Ballast Application Usage
• While installing a Philips fluorescent dimming ballast in a fixture,
care should be taken that the output lead lengths do not
exceed the specified maximum permissible limits. These limits
are specified in the Remote, Tandem or Through Wiring Distance
table on the next page.
• If excessive output lead lengths (outside the specification) are
maintained for a Philips fluorescent dimming ballast then the
ballast may behave undesirably or abnormally at low dim levels.
• If output lead wire lengths are not specified for linear Philips
fluorescent dimming ballasts, then it implies that the output
lead length should not be extended any more than what was
provided with the dimming ballast.
• For Philips CFL dimming ballasts, the output lead length between
the ballast and the lamp socket should be maintained as short
as possible. It is recommended that this lead length should not
exceed 24”.
• Before using a Philips fluorescent dimming ballast in remote
mounting applications or for applications with emergency power
supplies, please refer to the Remote, Tandem or Through Wiring
Distance table on the next page and verify whether the ballast
supports remote mounting application.
• If the Philips fluorescent dimming ballast supports remote
mounting, then
Example:
A luminaire contains (1) IZT3S32SC Philips Mark 7 0-10V
fluorescent dimming ballast and (1) emergency ballast in a three
lamp, single lamp cross-section, 12’ fixture. This application will have
issues because of the excessive wire lengths that result in capacitive
losses which may cause short lamp life, uneven lamp performance,
or even inability to ignite the lamp(s). In such an application it is
preferred to use one of the following approaches:
*
One IZT2S32SC ballast to control two lamps (can be remote
mounted up to 6’) and one IZT132SC ballast in conjunction
with the emergency ballast to control one lamp. The total
output lead length measured from the dimming ballast to the
lamps sockets (including the emergency ballast wiring) should
be less than 6’.
*
One IZT132SC ballast to control one lamp (can be remote
mounted up to 6’) and one IZT2S32SC ballast in conjunction
with emergency ballast to control two lamps. The total output
lead length measured from the dimming ballast to the lamps
sockets (including the emergency ballast wiring) should be less
than 6’ (This approach will provide 2 lamps to be turned ON
during emergency).
• For additional application support, contact technical support
at Philips Lighting.
o For non emergency application, the remote mounting
distance should not exceed the specified limit.
o
For applications with emergency power supplies, the total
output lead wire length measured from the fluorescent
dimming ballast to the lamps sockets (including the
emergency ballast wiring) should not exceed the specified
limit of the Remote, Tandem or Through Wiring Distance
table on the next page.
• If the Philips fluorescent dimming ballast does not support
remote mounting, then
o For non emergency application, the output lead length
should not be extended any further than what was
provided with the dimming ballast.
o
For applications with emergency power supplies, the total
output lead wire length measured from the dimming
ballast to the lamp sockets (including the emergency
ballast wiring) should not exceed the lead length that was
provided with the fluorescent dimming ballast. If maintaining
the lead lengths within the specification is not possible
then it is recommended to use a Philips fluorescent
dimming ballast that supports remote mounting. The
example below can be used as a reference for an
appropriate application usage of a Philips fluorescent
dimming ballast.
Atlas Full Line Catalog 2014-2015
3-13
ELECTRONIC FLUORESCENT BALLASTS
Allowed Wiring Configuration
Remote
(max length)
GCN-2S28-L
GOP-2PSP32-LW-SC
GOP-2PSP32-SC
GOP-3PSP32-SC
GOP-4PSP32-LW-SC
GOP-4PSP32-SC
GOPA-1P32-LW-SC
GOPA-1P32-SC
GOPA-2P32-LW-SC
GOPA-2P32-SC
GOPA-3P32-LW-SC
GOPA-3P32-SC
GOPA-4P32-LW-SC
GOPA-4P32-SC
HCN-2S54-90C-WL
HCN-4S54-90C-2LS-G
HDF128T5
HDF132T8
HDF140T5
HDF154T5
HDF224T5
HDF226T4
HDF228T5
HDF232T8
HDF239T5
HDF240T5
HDF242T5
HDF254T5
HDF332T8
HDF432T8
HOP-2PSP54-L
HOP-2PSP32-HL-L
HOP-4PSP54-2LS-G
HOP-4PSP32-HL-G
ICF-1D38-H1-LD
ICF-2S13-H1-LD
ICF-2S13-M1-BS
ICF-2S18-H1-LD
ICF-2S18-M1-BS
ICF-2S26-H1-LD
ICF-2S26-M1-BS
ICF-2S42-M2-BS
ICF-2S42-M2-LD
ICF-2S42-90C-M2-BS
ICF-2S42-90C-M2-LD
ICF-2S70-M4-LD
ICN-132-MC
ICN-1P32-N
ICN-1S80-T
ICN-1TTP40-SC
ICN-2M32-MC
Tandem
Through
Blue
Red
Yellow
Blue/White
Brown
Orange
Application
Note
20’YesYes10’ 10’ 10’ 2 (f)
20’YesYes20’ 20’ 18’ 1 (e)
20’YesYes20’ 20’ 18’ 1 (e)
20’YesYes20’20’18’18’ 1 (e)
20’YesYes20’20’18’18’18’ 1 (e)
20’YesYes20’20’18’18’18’ 1 (e)
8’YesYes8’ 8’ 1 (c)
8’YesYes8’ 8’ 1 (c)
8’YesYes8’ 8’ 1 (c)
8’YesYes8’ 8’ 1 (c)
8’YesYes8’ 8’ 1 (c)
8’YesYes8’ 8’ 1 (c)
8’YesYes8’ 8’ 8’ 1 (c)
8’YesYes8’ 8’ 8’ 1 (c)
20’YesYes20’ 4’ 20’ 3
20’YesYes20’ 4’ 4’ 20’ 20’ 20’ 7
6’
NA
NA4
6’
NA
NA4
6’
NA
NA4
No
NA
NA5
6’YesYes6’ 6’ 6’ 1
No
No
No5
6’YesYes6’ 6’ 6’ 1
6’YesYes6’ 6’ 6’ 1
6’YesYes6’ 6’ 6’ 1
6’
No
No4
No
No
No5
No
No
Yes5’4’4’ 3
No
No
No5
No No Yes 1’ 1.25’5.2’1.25’4.2’ 3
20’YesYes20’ 20’ 15’ 1
20’YesYes20’20’18’18’ 1 (e)
20’YesYes20’20’15’15’15’ 1
20’YesYes20’20’18’18’18’ 1 (e)
15’
NA
NA4
1-Lamp
15’
NA
NA4
2-Lamp
6’YesYes2’ 6’ 6’ 2
1-Lamp
15’
NA
NA4
2-Lamp
6’YesYes2’ 6’ 6’ 2
1-Lamp
15’
NA
NA4
2-Lamp
6’YesYes2’ 6’ 6’ 2
1-Lamp
15’
NA
NA4
2-Lamp
6’YesYes2’ 6’ 6’ 2
1-Lamp
15’
NA
NA4
2-Lamp
6’YesYes2’ 6’ 6’ 2
6’YesYes2’ 6’ 6’ 2
20’
NA
NA4
20’
NA
NA4
20’
NA
NA4
20’
NA
NA4
20’
Yes
Yes
20’
20’1
For nominal input voltage and 25°C ambient temperature. See all notes on page 3-18.
3-14
Maximum Lead Length (Feet) for Tandem or Through Wiring
(Total length of all wires between ballast and lamp sockets)
Atlas Full Line Catalog 2014-2015
ELECTRONIC FLUORESCENT BALLASTS
Allowed Wiring Configuration
Remote
(max length)
ICN-2P32-N
ICN-2P60-SC
ICN-2S24-T
ICN-2S24-N
ICN-2S28-T
ICN-2S28-N
ICN-2S39-T
ICN-2S39-N
ICN-2S40-N
ICN-2S54-T
ICN-2S54-N
ICN-2S54-90C-N
ICN-2S54-90C-T
ICN-2S86
ICN-2S110-SC
ICN-2TTP40-SC
ICN-3P32-N
ICN-3S14-T
ICN-3TTP40-SC
ICN-4P32-N
ICN-4S54-90C-2LS-G
IDA-128-D
IDA-132-SC
IDA-154
IDA-2S28-D
IDA-2S32-SC
IDA-2S54
IDA-3S32-G
IDA-4S32
IDL-2S26-M5-BS
IDL-2S26-M5-LD
IDL-2T42-M5-BS
IDL-2T42-M5-LD
IEZ-124-D
IEZ-128-D
IEZ-2S24-D
IEZ-2S28-D
IOP-1P32-HL-SC
IOP-1P32-LW-N
IOP-1P32-N
IOP-1PSP32-LW-N
IOP-1PSP32-N
IOP-2P32-HL-N
IOP-2P32-LW-N
IOP-2P32-N
IOP-2P59-SC
IOP-2PSP32-HL-N
IOP-2PSP32-LW-N
IOP-2PSP32-N
Tandem
Through
Maximum Lead Length (Feet) for Tandem or Through Wiring
(Total length of all wires between ballast and lamp sockets)
Blue
Red
Yellow
Blue/White
Brown
Orange
Application
Note
20’YesYes20’
20’
1 (e)
20’YesYes20’
20’1
20’YesYes20’ 4’ 20’ 3
20’YesYes20’ 4’ 20’ 3
10’YesYes10’ 10’ 10’ 3
10’YesYes10’ 10’ 10’ 3
20’YesYes20’ 4’ 20’ 3
20’YesYes20’ 4’ 20’ 3
20’ YesYes 4’
10’
10’2
20’YesYes20’ 4’ 20’ 3
20’YesYes20’ 4’ 20’ 3
20’YesYes20’ 4’ 20’ 3
20’YesYes20’ 4’ 20’ 3
12’YesYes12’ 4’ 12’ 3 (b)
20’
Yes
Yes
4’
20’
20’2
20’
Yes
Yes
20’
20’1
20’
Yes
Yes
20’
20’
1 (e)
No
No
No5
20’
Yes
Yes
20’
20’1
20’YesYes20’ 20’ 20’ 1 (e)
20’YesYes20’ 4’ 4’ 20’ 20’ 20’ 7
6’
NA
NA4
No
NA
NA5
No
NA
NA5
6’YesYes6’ 6’ 6’ 1
No
No
Yes5’4’4’ 3
No
No
Yes5’4’4’ 3
No
No
No5
No NoYes-8’
1’ 1.25’5.2’1.25’4.2’ 3
No
No
No5
No
No
No5
6’
NA
NA5
6’
NA
NA5
No
No
Yes3’2’2’ 3
6’YesYes6’ 6’ 6’ 3
20’
NA
Yes
1 (e)
20’
NA
NA
1 (e)
20’
Yes
NA
1 (e)
20’
NA
NA4
20’
NA
NA4
20’
Yes
Yes
20’
20’
1 (e)
20’
Yes
Yes
20’
20’
1 (e)
20’
Yes
Yes
20’
20’
1 (e)
20’
Yes
Yes
20’
20’
1 (e)
20’
YesYes
20’
20’
18’
1 (e)
20’
YesYes
20’
20’
18’
1 (e)
20’
YesYes
20’
20’
18’
1 (e)
For nominal input voltage and 25°C ambient temperature. See all notes on page 3-18.
Atlas Full Line Catalog 2014-2015
3-15
ELECTRONIC FLUORESCENT BALLASTS
Allowed Wiring Configuration
Remote
(max length)
IOP-2PSP54-SC
IOP-2S28-95-SC-SD
IOP-2S28-115-SC-SD
IOP-2S28-95-SC
IOP-2S28-115-SC
IOP-2S32-SC-SD
IOP-3P32-HL-N
IOP-3P32-LW-N
IOP-3P32-N
IOP-3PSP32-HL-SC
IOP-3PSP32-LW-SC
IOP-3PSP32-SC
IOP-4P32-HL-SC
IOP-4P32-LW-N
IOP-4P32-N
IOP-4PSP32-HL-G
IOP-4PSP32-LW-SC
IOP-4PSP32-SC
IOP-4PSP54-2LS-G
IOPA-1P32-HL-N
IOPA-1P32-LW-N
IOPA-1P32-N
IOPA-2P32-HL-N
IOPA-2P32-LW-N
IOPA-2P32-N
IOPA-3P32-HL-N
IOPA-3P32-LW-N
IOPA-3P32-N
IOPA-4P32-LW-N
IOPA-4P32-N
IZT-124-D
IZT-128-D
IZT-132-SC
IZT-154-D
IZT-180-D
IZT-2S26-M5-BS
IZT-2S26-M5-LD
IZT-2S24-D
IZT-2S28-D
IZT-2S32-SC
IZT-2S54-D
IZT-2T42-M5-BS
IZT-2T42-M5-LD
IZT-2TTS40-SC
IZT-3S32-SC
IZT-4S32
IZT-4PSP32-G
RCF-2S13-M1-BS-QS
Tandem
Through
Blue
Red
Yellow
Blue/White
Brown
Orange
Application
Note
20’
YesYes
20’
20’
15’1
7’YesYes7’ 7’ 7’ 1
7’YesYes7’ 7’ 7’ 1
20’YesYes20’ 20’ 20’ 1
20’YesYes20’ 20’ 20’ 1
7’YesYes7’ 7’ 7’ 1
20’
Yes
Yes
20’
20’
1 (e)
20’
Yes
Yes
20’
20’
1 (e)
20’
Yes
Yes
20’
20’
1 (e)
20’
YesYes
20’
20’18’18’
1 (e)
20’
YesYes
20’
20’18’18’
1 (e)
20’
YesYes
20’
20’18’18’
1 (e)
20’YesYes20’ 20’ 8’ 1 (e)
20’YesYes20’ 20’ 8’ 1 (e)
20’YesYes20’ 20’ 8’ 1 (e)
20’
YesYes
20’
20’18’18’18’1 (e)
20’
YesYes
20’
20’18’18’18’1 (e)
20’
YesYes
20’
20’18’18’18’1 (e)
20’
YesYes
20’
20’15’
15’
15’
1 (e)
20’YesYes20’ 20’
1 (e)
20’YesYes20’ 20’
1 (e)
20’YesYes20’ 20’
1 (e)
20’YesYes20’20’’
1 (e)
20’ YesYes 20’20’
1 (e)
20’YesYes20’20’’
1 (e)
20’YesYes20’20’’
1 (e)
20’YesYes20’ 20’
1 (e)
20’YesYes20’20’’
1 (e)
20’YesYes20’ 20’
8’
1 (e)
20’YesYes20’ 20’
8’
1 (e)
6’
NA
NA5
6’
NA
NA4
6’
NA
NA4
No
NA
NA5
No
NA
NA5
No
No
No5
No
No
Yes3’2’2’
6’YesYes6’ 6’ 6’
6’YesYes6’ 6’ 6’
No
No
Yes5’4’4’
3
1
1
3
No
No
Yes5’4’4’ 3
6’
No
No4
No
No
No5
No No Yes 1’ 1.25’5.2’1.25’4.2’ 3
No
No
Yes5’5’1’5’
R/W=5’ 3
1-Lamp
15’
No
No4
2-Lamp6’YesYes2’ 6’ 6’ 2
For nominal input voltage and 25°C ambient temperature. See all notes on page 3-18.
3-16
Maximum Lead Length (Feet) for Tandem or Through Wiring
(Total length of all wires between ballast and lamp sockets)
Atlas Full Line Catalog 2014-2015
ELECTRONIC FLUORESCENT BALLASTS
Allowed Wiring Configuration
Remote
(max length)
RCF-2S18-M1-BS-QS
RCF-2S26-H1-LD-QS
RCF-2S26-M1-BS-QS
REB-2P32-SC
REB-4P32-SC
RELB-2S40-N
REZ-132-SC
REZ-154
REZ-1Q18-M2-BS
REZ-1Q18-M2-LD
REZ-1T42-M2-BS
REZ-1T42-M2-LD
REZ-1TTS40-SC
REZ-2Q18-M2-BS
REZ-2Q18-M2-LD
REZ-2Q26-M2-BS
REZ-2Q26-M2-LD
REZ-2S32-SC
REZ-2S54
REZ-2T42-M3-BS
REZ-2T42-M3-LD
REZ-2TTS40-SC
REZ-3S32-SC
RK-2S32-TP
VEZ-132-SC
VEZ-154
VEZ-1Q18-M2-BS
VEZ-1Q18-M2-LD
VEZ-1T42-M2-BS
VEZ-1T42-M2-LD
VEZ-1TTS40-SC
VEZ-2Q18-M2-BS
VEZ-2Q18-M2-LD
VEZ-2Q26-M2-BS
VEZ-2Q26-M2-LD
VEZ-2S32-SC
VEZ-2S54
VEZ-2T42-M3-BS
VEZ-2T42-M3-LD
VEZ-2TTS40-SC
VEZ-3S32-SC
VK-2S32-TP
VZT-4S32-HL
Tandem
Through
Maximum Lead Length (Feet) for Tandem or Through Wiring
(Total length of all wires between ballast and lamp sockets)
Blue
Red
Yellow
Blue/White
Brown
Orange
Application
Note
1-Lamp
15’
No
No4
2-Lamp6’YesYes2’ 6’ 6’ 2
1-Lamp
15’
No
No4
2-Lamp6’YesYes2’ 6’ 6’ 2
20”
Yes
Yes
20’
20’1
20”YesYes20’20’20’ 1
20”
Yes
Yes
4’
10’
10’2
6’
NA
NA4
No
NA
NA5
No
NA
NA5
No
NA
NA5
6’
NA
NA4
No
No
No5
No
No
No5
6’YesYes6’ 6’ 6’ 1
No
No
Yes5’4’4’ 3
No
No
No5
6’
No
No5
No
No
No5
20’
Yes
Yes
4’
20’
20’
2 (a)
6’
NA
NA4
No
NA
NA5
No
NA
NA5
No
NA
NA5
6’
NA
NA4
No
No
No5
No
No
No5
6’YesYes6’ 6’ 6’ 1
No
No
Yes5’4’4’ 5
No
No
No5
6’
No
No4
No
No
No5
20’
Yes
Yes
4’
20’
20’
2 (a)
No No Yes 1’ 1.25’5.2’1.25’4.2’ 3
For nominal input voltage and 25°C ambient temperature. See all notes on page 3-18.
Atlas Full Line Catalog 2014-2015
3-17
ELECTRONIC FLUORESCENT BALLASTS
Notes
For nominal input voltage and 25°C ambient temperature.
Notes:
1. For Tandem or Through wiring, any lamp can be remote mounted.
2. For Tandem or Through wiring, BLUE lamp must be in same fixture as ballast.
3. For Tandem or Through wiring, RED lamp must be in same fixture as ballast.
4. No Tandem or Through wiring allowed.
5. No Remote, Tandem or Through wiring allowed.
6. For Tandem or Through wiring, RED lamp and BLUE lamp must be in same fixture as ballast.
7. For Tandem or Through wiring, RED lamp and YELLOW lamp must be in same fixture as ballast.
(a) Ballast can be Remote, Tandem or Through wired farther than 20’. Consult factory.
(b) Ballast can be Remote, Tandem or Through wired to a maximum 12 feet between ballast and lampholder for (2)F96T8/HO lamps or 20 feet for all other T8/HO lamps.
(c) Ballast can be Remote, Tandem or Through wired to a maximum 6 feet between ballast and lampholder for energy-saving lamps or 8 feet for standard lamps.
(d) For tandem wiring, lamp leads from multiple ballast cannot be run in same conduit. Separate conduit must be used for each ballast.
(e) Ballast can be Remote, Tandem, or Through wired to a maximum of 20’ for standard lamps and 6’ for energy-saving lamps
(f) Energy-saving lamps not allowed for Tandem wiring
Use 18 AWG wire or larger
DOE Legislation
The US Department of Energy (DOE) issued amended standards for fluorescent lamp ballasts on November 14, 2011. The new
standards go into effect on November 14, 2014 and all covered fluorescent ballasts manufactured or imported into the United
States must comply. For more information on this amended standard please visit http://www1.eere.energy.gov/femp/technologies/
eep_fluor_ballast.html.
The new amended standards cover fluorescent ballasts operating T12, T8, T5, T5HO and sign ballasts. These standards will require
fluorescent ballasts to meet a minimum Ballast Luminous Efficiency (BLE) that is determined by the type of lamp operated and the
arc power of the lamps. It is essentially a minimum efficiency standard based on lamp power compared to input watts.
Philips Advance expects minimal changes to electronic fluorescent ballasts, however many magnetic ballasts will no longer be able
to be imported or manufactured into the United States after November 14, 2014. Please see www.philips.com/advance for more
information on ballasts affected by the amended standard.
3-18
Atlas Full Line Catalog 2014-2015
ELECTRONIC FLUORESCENT BALLASTS
Reading Date Codes for Warranty Date on Electronic Ballasts
Most date codes are stamped on the back of the ballast (opposite the label side). The date code is part of a larger group
of numbers and letters, which call out the various codes for the factory where the ballast was manufactured. Depending upon
which Philips Lighting factory manufactured the ballast, the date stamp can vary slightly, in terms of its position on the ballast and
the number sequence.
Some electronic ballasts manufactured from 1988 to 1991 may have the date code in ink stamped on the ballast label.
Some ballasts have the manufacturing code printed in ink on the end of the ballast.
A typical date code for an electronic ballast will have the week and the year the ballast was manufactured. Some ballasts
will have the day of the week included too.
Some examples of these different date codes that you may find are:
937N1B
B41893
The date code is the 18th week of 1993, stamped one line over the other.
937N1J
P23292
The date code is the 32nd week of 1992, stamped one line over the other.
16
93
973N20P3
The date code is the 16th week of 1993, stamped at the end of the ear on the back.
892P
259P
24
94
The date code is the 24th week of 1994, stamped on four separate lines.
91405BB0291N
The date code is the 2nd week of 1991, stamped on one line.
9716T032HD
120432IS24
The date code is the 16th week of 1997, stamped in ink on the end of the ballast.
The above examples are for ballasts that are already out of warranty. The next two examples are for ballasts that may still be covered
under warranty. In 2006 the date code configuration was switched to the bottom example.
693P0MMA
53301707
The date code is the 5th day, of the 33rd week of 2001, stamped on the back of the ballast.
06127M50
F2104571
The date code is the 127th day of 2006 stamped on the back of the ballast.
For assistance in determining a date code – call Customer Care (Technical Services /Warranty) at 1-800-372-3331
Atlas Full Line Catalog 2014-2015
3-19
ELECTRONIC FLUORESCENT BALLASTS
SmartMate and Mark 10 Powerline Ballast Kits
Kit Contents and Key Features
Key Benefits
SmartMate or Mark 10 Powerline ballast
• Intellivolt Technology
• Dual-entry color-coded connectors
• Multi-Lamp Capability
Makes ballast selection and installation a breeze
• Provides full range input voltage from 120V to 277V
• Adds to application versatility; simplifies wiring
• Encompasses a wide variety of applications, including
• quads, triple tubes, circline, 2D and long twin-tube lamps
Mounting Plate Adapter
• Multiple lead wire cutouts, including center hole
• Integral mounting studs
Takes the guess-work out of mounting
• Allows wiring and mounting to existing fixture’s mounting plate
• Eliminates need to stock units with and without studs
Lead Wire
• Color-coded
• Pre-stripped 3/8” on one end — 5/8” on the other
Allows installer to pre-wire
• Enables wiring accuracy
• Meets UL poke-in connector requirements and facilitates
• final connection
Wire Extraction Tool
Makes for quick disconnections if necessary
Individually Shrink-Wrapped Kits
ICF-2S13-H1-LD-K REZ-2Q26-M2-LD-K
ICF-2S18-H1-LD-K VEZ-2Q26-M2-LD-K
ICF-2S26-H1-LD-K REZ-1T42-M2-LD-K
ICF-2S42-M2-LD-K VEZ-1T42-M2-LD-K
Kits contain the standard ballasts.
For lamp and operational data consult
pages 3-21 through 3-28 and 4-6
• Ideally suited for replacement of expired electronic ballasts, regardless of brand or mounting configuration.
• Dramatically simplifies the upgrading of incandescent fixtures to energy-saving CFL.
• Compatible with most J-Box covers
3-20
Atlas Full Line Catalog 2014-2015
ELECTRONIC FLUORESCENT BALLASTS
For 13-18W T4 Quad Lamps
No. of
Lamps
Input
Volts
Lamp
Starting
Method
Ballast
Family
Catalog Number
Input
Power
ANSI
(Watts)
Ballast
Factor
HIGH POWER FACTOR
Max.
THD
%
Line
Current
(Amps)
SOUND RATED A
Min.
Starting
Temp.
(°F/°C)
Dim.
Wiring
Dia.
0/-18
Size 1
160
0/-18
Size 1
159
0/-18
Size 1
160
0/-18
Size 1
159
CFQ13W/G24q - 13W CFL Quad Tube Lamp (PL-C13W/4P, F13DBX/4P, CF13DD/E)
120
1
120-277
120
2
120-277
RS
PS
RS
PS
AmbiStar
RCF-2S13-M1-BS-QS
SmartMate
ICF-2S13-M1-BS-QS
ICF-2S13-H1-LD
ICF-2S13-H1-LD-K ❿
ICF-2S13-M1-BS
AmbiStar
RCF-2S13-M1-BS-QS
16
1.00
10
0.13
16
1.00
10
0.13-0.06
29
1.00
10
0.25
29
1.00
10
0.25-0.11
ICF-2S13-M1-BS-QS
SmartMate
ICF-2S13-H1-LD
ICF-2S13-H1-LD-K ❿
ICF-2S13-M1-BS
CFQ18W/G24q - 18W CFL Quad Tube Lamp (PL-C18W/4 P, F18DBX/4P, CF18DD/E)
120
1
120-277
120
2
120-277
RS
PS
RS
PS
AmbiStar
SmartMate
AmbiStar
SmartMate
RCF-2S18-M1-BS-QS
ICF-2S18-M1-BS-QS
ICF-2S18-H1-LD
ICF-2S18-H1-LD-K ❿
ICF-2S18-M1-BS
RCF-2S18-M1-BS-QS
ICF-2S18-M1-BS-QS
ICF-2S18-H1-LD
ICF-2S18-H1-LD-K ❿
ICF-2S18-M1-BS
19
1.00
10
0.16
19
1.00
10
0.16-0.07
35
0.95
10
0.30
35
0.95
10
0.30-0.13
❿ Replacement/Retrofit ballast kits indicated with suffix K are available to distributors. Refer to page 3-20 for details.
Refer to page 3-26 for dimensions and wiring diagrams
Refer to pages 9-23 to 9-27 for lead lengths and shipping data
Atlas Full Line Catalog 2014-2015
3-21
ELECTRONIC FLUORESCENT BALLASTS
For 26W Quad and
13W Triple T4 Lamps
No. of
Lamps
Input
Volts
Lamp
Starting
Method
Ballast
Family
Catalog Number
HIGH POWER FACTOR
Input
Power
ANSI
(Watts)
Ballast
Factor
Max.
THD
%
Line
Current
(Amps)
SOUND RATED A
Min.
Starting
Temp.
(°F/°C)
Dim.
Wiring
Dia.
0/-18
Size 1
160
CFQR26W/G24q - 26W CFL Quad Tube Lamp (PL-C26W/4P, F26DBX/4P, CF26DD/E)
120
1
120-277
120
2
120-277
RS
PS
RS
PS
AmbiStar
SmartMate
AmbiStar
RCF-2S26-H1-LD-QS
RCF-2S26-M1-BS-QS
ICF-2S26-M1-BS-QS
ICF-2S26-H1-LD
ICF-2S26-H1-LD-K ❿
ICF-2S26-M1-BS
RCF-2S26-H1-LD-QS
RCF-2S26-M1-BS-QS
ICF-2S26-M1-BS-QS
ICF-2S26-H1-LD
SmartMate
ICF-2S26-H1-LD-K ❿
ICF-2S26-M1-BS
ICF-2S42-M2-BS
ICF-2S42-M2-LD
ICF-2S42-M2-LD-K ❿
ICF-2S42-90C-M2-BS
ICF-2S42-90C-M2-LD
27
1.00
10
0.23
27
1.00
10
0.23-0.10
51
1.00
10
0.43
51
1.00
10
0.43-0.19
Size 1
159
0/-18
52
1.00
10
0.43-0.19
Size 2
52
1.00
10
0.43-0.19
CFTR13W/GX24q - 13W CFL Triple Tube Lamp (F13TBX/4P, CF13DT/E)
120
1
120-277
120
2
120-277
RS
PS
RS
PS
AmbiStar
SmartMate
AmbiStar
SmartMate
RCF-2S13-M1-BS-QS
ICF-2S13-M1-BS-QS
ICF-2S13-H1-LD
ICF-2S13-H1-LD-K ❿
ICF-2S13-M1-BS
RCF-2S13-M1-BS-QS
ICF-2S13-M1-BS-QS
ICF-2S13-H1-LD
ICF-2S13-H1-LD-K ❿
ICF-2S13-M1-BS
16
1.00
10
0.13
16
1.00
10
0.13-0.06
29
1.00
10
0.25
29
1.00
10
0.25-0.11
❿ Replacement/Retrofit ballast kits indicated with suffix K are available to distributors. Refer to page 3-20 for details.
Refer to page 3-26 for dimensions and wiring diagrams
Refer to pages 9-23 to 9-27 for lead lengths and shipping data
3-22
Atlas Full Line Catalog 2014-2015
0/-18
Size 1
160
0/-18
Size 1
159
ELECTRONIC FLUORESCENT BALLASTS
For 18-26W Triple T4 Lamps
No. of
Lamps
Input
Volts
Lamp
Starting
Method
Ballast
Family
Catalog Number
Input
Power
ANSI
(Watts)
Ballast
Factor
HIGH POWER FACTOR
Max.
THD
%
Line
Current
(Amps)
SOUND RATED A
Min.
Starting
Temp.
(°F/°C)
Dim.
Wiring
Dia.
0/-18
Size 1
160
0/-18
Size 1
159
0/-18
Size 1
160
CFTR18W/GX24q - 18W CFL Triple Tube Lamp (PL-T18W, F18TBX/4P, CF18DT/E)
120
1
120-277
120
2
120-277
RS
PS
RS
PS
AmbiStar
SmartMate
AmbiStar
SmartMate
RCF-2S18-M1-BS-QS
ICF-2S18-M1-BS-QS
ICF-2S18-H1-LD
ICF-2S18-H1-LD-K ❿
ICF-2S18-M1-BS
RCF-2S18-M1-BS-QS
ICF-2S18-M1-BS-QS
ICF-2S18-H1-LD
ICF-2S18-H1-LD-K ❿
ICF-2S18-M1-BS
20
1.05
10
0.17
20
1.05
10
0.17-0.08
39
1.05
10
0.33
39
1.05
10
0.33-0.14
CFTR26W/GX24q - 26W CFL Triple Tube Lamp (PL-T26W, F26TBX/4P, CF26DT/E)
120
RS
AmbiStar
RCF-2S26-H1-LD-QS
RCF-2S26-M1-BS-QS
29
1.10
10
0.24
29
1.10
10
0.24-0.11
54
1.00
10
0.45
54
1.00
10
0.45-0.20
ICF-2S26-M1-BS-QS
1
120-277
120
PS
RS
SmartMate
AmbiStar
ICF-2S26-H1-LD
ICF-2S26-H1-LD-K ❿
ICF-2S26-M1-BS
RCF-2S26-H1-LD-QS
RCF-2S26-M1-BS-QS
ICF-2S26-M1-BS-QS
ICF-2S26-H1-LD
2
120-277
PS
SmartMate
ICF-2S26-H1-LD-K ❿
ICF-2S26-M1-BS
ICF-2S42-M2-BS
ICF-2S42-M2-LD
ICF-2S42-M2-LD-K ❿
ICF-2S42-90C-M2-BS
ICF-2S42-90C-M2-LD
Size 1
159
0/-18
55
1.00
10
0.46-0.21
Size 2
❿ Replacement/Retrofit ballast kits indicated with suffix K are available to distributors. Refer to page 3-20 for details.
Refer to page 3-26 for dimensions and wiring diagrams
Refer to pages 9-23 to 9-27 for lead lengths and shipping data
Atlas Full Line Catalog 2014-2015
3-23
ELECTRONIC FLUORESCENT BALLASTS
For 32-70W Triple T4 Lamps
No. of
Lamps
Input
Volts
Lamp
Starting
Method
Ballast
Family
Catalog Number
Input
Power
ANSI
(Watts)
Ballast
Factor
HIGH POWER FACTOR
Max.
THD
%
Line
Current
(Amps)
SOUND RATED A
Min.
Starting
Temp.
(°F/°C)
Dim.
Wiring
Dia.
0/-18
Size 1
160
0/-18
Size 2
159
0/-18
Size 1
160
CFTR32W/GX24q - 32W CFL Triple Tube Lamp (PL-T32W, F32TBX/4P, CF32DT/E)
120
1
2
120-277
120-277
RS
PS
PS
AmbiStar
SmartMate
SmartMate
RCF-2S26-H1-LD-QS
RCF-2S26-M1-BS-QS
ICF-2S26-M1-BS-QS
ICF-2S26-H1-LD
ICF-2S26-H1-LD-K ❿
ICF-2S26-M1-BS
ICF-2S42-M2-BS
ICF-2S42-M2-LD
ICF-2S42-M2-LD-K ❿
36
0.98
10
0.31
36
0.98
10
0.31-0.13
68
0.98
10
0.57-0.25
ICF-2S42-90C-M2-BS
ICF-2S42-90C-M2-LD
CFTR42W/GX24q - 42W CFL Triple Tube Lamp (PL-T42W, F42TBX/4P, CF42DT/E)
120
1
2
120-277
120-277
RS
PS
PS
RCF-2S26-H1-LD-QS
RCF-2S26-M1-BS-QS
ICF-2S26-M1-BS-QS
ICF-2S26-H1-LD
SmartMate
ICF-2S26-H1-LD-K ❿
ICF-2S26-M1-BS
ICF-2S42-M2-BS
ICF-2S42-M2-LD
SmartMate ICF-2S42-M2-LD-K ❿
AmbiStar
46
0.98
10
0.38
46
0.98
10
0.38-0.17
93
0.97
10
0.78-0.33
0/-18
Size 2
159
ICF-2S42-90C-M2-BS
ICF-2S42-90C-M2-LD
CFTR57W/GX24q - 57W CFL Lamp (PL-T57W, F57QBX/4P, CF57DT/E)
1
120-277
PS
2
120-277
PS
SmartMate
ICF-2S42-M2-BS
ICF-2S42-M2-LD
ICF-2S42-M2-LD-K ❿
ICF-2S42-90C-M2-BS
ICF-2S42-90C-M2-LD
SmartMate ICF-2S70-M4-LD
59
0.94
10
0.50-0.21
0/-18
Size 2
160
128-126
1.00
10
1.07-0.46
0/-18
Size 4
159
75
0.96
10
0.63-0.27
0/-18
Size 2
160
156-152
1.00
10
1.30-0.56
0/-18
Size 4
159
CFTR70W/GX24q - 70W CFL Lamp (F70QBX/4P, CF70DT/E)
ICF-2S42-M2-BS
ICF-2S42-M2-LD
1
120-277
PS
2
120-277
PS
SmartMate
ICF-2S42-M2-LD-K ❿
ICF-2S42-90C-M2-BS
ICF-2S42-90C-M2-LD
SmartMate ICF-2S70-M4-LD
❿ Replacement/Retrofit ballast kits indicated with suffix K are available to distributors. Refer to page 3-20 for details.
Refer to page 3-26 for dimensions and wiring diagrams
Refer to pages 9-23 to 9-27 for lead lengths and shipping data
3-24
Atlas Full Line Catalog 2014-2015
ELECTRONIC FLUORESCENT BALLASTS
For 10-38W 2D Lamps
No. of
Lamps
Input
Volts
Lamp
Starting
Method
Ballast
Family
Catalog Number
HIGH POWER FACTOR
SOUND RATED A
Input
Power
ANSI
(Watts)
Ballast
Factor
Max.
THD
%
Line
Current
(Amps)
Min.
Starting
Temp.
(°F/°C)
Dim.
Wiring
Dia.
13
1.05
15
0.11-0.05
0/-18
Size 1
160
23
0.95
15
0.19-0.09
0/-18
Size 1
159
17
1.00
15
0.14-0.06
0/-18
Size 1
160
37
1.00
10
0.31-0.13
0/-18
Size 1
159
20
0.90
15
0.16-0.07
0/-18
Size 1
160
40
0.91
10
0.33-0.14
0/-18
Size 1
159
CFS10W/GR10q - 10W 2D Lamp (F10 2D/4P)
1
120-277
PS
2
120-277
PS
ICF-2S13-H1-LD
SmartMate ICF-2S13-H1-LD-K ❿
ICF-2S13-M1-BS
ICF-2S13-H1-LD
SmartMate ICF-2S13-H1-LD-K ❿
ICF-2S13-M1-BS
CFS16W/GR10q - 16W 2D Lamp (F16 2D/4P)
1
120-277
PS
2
120-277
PS
ICF-2S13-H1-LD
SmartMate ICF-2S13-H1-LD-K ❿
ICF-2S13-M1-BS
ICF-2S18-H1-LD
SmartMate ICF-2S18-H1-LD-K ❿
ICF-2S18-M1-BS
CFS21W/GR10q - 21W 2D Lamp (F21 2D/4P)
1
2
120-277
120-277
PS
ICF-2S18-H1-LD
SmartMate ICF-2S18-H1-LD-K ❿
ICF-2S18-M1-BS
PS
ICF-2S18-H1-LD
ICF-2S18-H1-LD-K ❿
ICF-2S18-M1-BS
SmartMate
ICF-2S26-H1-LD
ICF-2S26-H1-LD-K ❿
ICF-2S26-M1-BS
1.12
10
0.42-0.18
27
1.00
10
0.23-0.10
0/-18
Size 1
160
57
1.00
10
0.48-0.21
0/-18
Size 2
159
31
0.85
10
0.26-0.11
0/-18
Size 1
160
62
0.80
10
0.55-0.23
0/-18
Size 2
159
51
CFS28W/GR10q - 28W 2D Lamp (PL-Q 28W/4P, F28 2D/4P)
1
120-277
PS
2
120-277
PS
SmartMate ICF-1D38-H1-LD
ICF-2S42-M2-BS
ICF-2S42-M2-LD
SmartMate ICF-2S42-M2-LD-K ❿
ICF-2S42-90C-M2-BS
ICF-2S42-90C-M2-LD
CFS38W/GR10q - 38W 2D Lamp (PL-Q 38W/4P, F38 2D/4P)
1
120-277
PS
2
120-277
PS
SmartMate ICF-1D38-H1-LD
ICF-2S42-M2-BS
ICF-2S42-M2-LD
SmartMate ICF-2S42-M2-LD-K ❿
ICF-2S42-90C-M2-BS
ICF-2S42-90C-M2-LD
❿ Replacement/Retrofit ballast kits indicated with suffix K are available to distributors. Refer to page 3-20 for details.
Refer to page 3-26 for dimensions and wiring diagrams
Refer to pages 9-23 to 9-27 for lead lengths and shipping data
Atlas Full Line Catalog 2014-2015
3-25
ELECTRONIC FLUORESCENT BALLASTS
CFL Wiring Diagrams and Dimensions
STUDS FOR -BS MODELS ONLY
-LD MODELS DO NOT HAVE MOUNTING STUDS
STUDS FOR -BS MODELS ONLY
-LD MODELS DO NOT HAVE MOUNTING STUDS
2.40"
3.00"
2.00"
2.00"
0.98"
1.29"
4.20"
4.20"
4.60"
4.55"
Size 1 Enclosure
3.00"
1.29"
7.00"
7.50"
Size 4 Enclosure
WIRING: (2) LAMP
BLACK
LINE
BLUE
WHITE
BALLAST
GREEN
YELLOW
RED
GREEN TERMINAL MUST BE GROUNDED
Diag. 159
Note: For AmbiStar 1-lamp operation on 2-lamp ballast,
use red and blue connectors
WIRING: (1) LAMP
BLACK
LINE
WHITE
BLUE
BALLAST
GREEN
RED
GREEN TERMINAL MUST BE GROUNDED
Diag. 160
Refer to pages 9-23 to 9-27 for lead lengths and shipping data
3-26
Atlas Full Line Catalog 2014-2015
Size 2 Enclosure
ELECTRONIC FLUORESCENT BALLASTS
For 24-36W FT5 Lamps
Input
Volts
Lamp
Starting
Method
HIGH POWER FACTOR
Input
Power
ANSI
(Watts)
Min.
Starting
Temp.
(°F/°C)
SOUND RATED A
Ballast
Factor
Max.
THD
%
Line
Current
(Amps)
0.99
1.02
1.11
1.12
20
10
15
10
0.21-0.10
0.22-0.10
0.24-0.13
0.24-0.12
48
0.93
10
0.41-0.18
ICF-2S42-M2-LD-K ❿
48
0.93
15
0.40-0.18
ICF-2S42-90C-M2-BS
ICF-2S42-90C-M2-LD
ICN-2S24-N
ICN-2S24-T
ICN-2S39-N
ICN-2S39-T
51-50
51
56-55
54
1.01
1.00
1.11
1.10
10
0.43-0.18
0.42-0.18
0.47-0.21
0.46-0.20
N
T
31
33
34-33
0.84
0.90
0.90
15
10
15
0.26-0.12
0.28-0.12
0.28-0.15
N
T
36
45
44
45
0.96
1.24
1.20
1.24
10
20
10
20
0.30-0.13
0.37-0.17
0.37-0.16
0.37-0.17
44
46
46
1.20
1.20
1.22
10
10
15
0.37-0.16
0.39-0.18
0.13-0.10
46
1.00
10
0.13-0.10
66-65
69
88-87
82-81
0.90
0.94
1.24
1.16
Centium HCN-2S54-90C-WL
Optanium HOP-2PSP54-L
Centium ICN-4S54-90C-2LS-G
Optanium IOP-4P2P54-2LS-G
Centium HCN-4S54-90C-2LS-G
Optanium HOP-4PSP54-2LS-G
88-87
82-81
88-85
89
87
1.24
1.16
1.20
1.20
1.00
10
10
10
0.73-0.31
0.26-0.19
0.25-0.18
133-132
128-127
137-135
129
1.20
1.20
1.20
1.00
10
10
10
10
1.11-0.49
1.07-0.31
0.40-0.29
0.38-0.28
ICN-4S54-90C-2LS-G
IOP-4P2P54-2LS-G
HCN-4S54-90C-2LS-G
HOP-4PSP54-2LS-G
176-173
170-167
182-180
172
1.20
1.20
1.20
1.00
10
10
10
10
1.47-0.64
1.42-0.61
0.53-0.38
0.50-0.37
Ballast
Family
Catalog Number
Dim.
Wiring
Dia.
FT24W/2G11 - 24/27W (PL-L24W, F27BX/RS, FT24DL)
1
120-277
PS
Centium
ICN-2S24-N
ICN-2S24-T
ICN-2S39-N
ICN-2S39-T
ICF-2S26-H1-LD
ICF-2S26-H1-LD-K ❿
ICF-2S26-M1-BS
ICF-2S42-M2-BS
SmartMate
ICF-2S42-M2-LD
2
120-277
PS
Centium
26
29
0/-18
0/-18
N
T
N
T
73
Size 1
160
Size 2
159
N
T
74A
FT36W/2G11 - 36/39W (PL-L36W, F39BX/RS, FT36DL)
ICN-2S24-N
ICN-2S24-T
ICN-2S39-N
1
Centium
120-277
PS
347-480
ICN-2S39-T
ICN-2S54-N
ICN-2S54-T
ICN-2S54-90C-N
ICN-2S54-90C-T
Optanium IOP-2PSP54-SC
Centium HCN-2S54-90C-WL
Optanium HOP-2PSP54-L
ICN-2S39-N
120-277
2
Centium
PS
347-480
3
4
120-277
347-480
PS
120-277
PS
347-480
ICN-2S39-T
ICN-2S54-N
ICN-2S54-T
ICN-2S54-90C-N
ICN-2S54-90C-T
Optanium IOP-2PSP54-SC
Centium
Optanium
Centium
Optanium
Refer to page 3-37 for dimensions
Refer to pages 3-26, 3-35 & 3-36 for wiring diagrams
Refer to pages 9-23 to 9-27 for lead lengths and shipping data
10
0.55-0.24
0.59-0.25
0.74-0.32
0.68-0.29
0.74-0.32
0.68-0.29
0/-18
-20/-29
N
T
N
T
N
T
B
L
0/-18
N
T
N
T
-20/-29
73
77
73
77
74A
N
T
B
L
78
74A
78
75A
-20/-29
G
80
75A
80
75
-20/-29
G
79
75
79
❿ Replacement/Retrofit ballast kits indicated with suffix K are available to distributors.
Refer to page 3-20 for details.
Atlas Full Line Catalog 2014-2015
3-27
ELECTRONIC FLUORESCENT BALLASTS
For 40W & 50W FT5 Lamps
No. of
Lamps
Input
Volts
Lamp
Starting
Method
Ballast
Family
Catalog Number
Input
Power
ANSI
(Watts)
Ballast
Factor
39
41
42
46
HIGH POWER FACTOR
Max.
THD
%
Line
Current
(Amps)
0.90
1.00
0.94
1.00
10
10
15
0.33-0.14
0.35-0.15
0.36-0.16
0.39-0.17
45
50
0.99
1.10
10
0.37-0.17
0.42-0.19
44
0.95
10
67
72
0.88
0.96
78
Min.
Starting
Temp.
(°F/°C)
SOUND RATED A
Dim.
Wiring
Dia.
B
70
N
T
N
T
73
0.37-0.16
Size 2
160
10
10
0.57-0.25
0.61-0.27
B
71
0.95
10
0.66-0.28
Size 2
159
99
0.88
10
0.83-0.35
B
72
61
60
1.12
1.11
15
10
0.51-0.23
0.50-0.22
61
60
61
61
60
118-115
1.12
1.11
1.10
1.12
1.00
1.07
15
10
10
10
10
10
0.51-0.23
0.50-0.22
0.51-0.23
0.18-0.13
0.17-0.13
0.99-0.43
111-109
118-115
1.03
1.07
10
10
0.92-0.39
0.99-0.43
111-109
117-114
118
116
1.03
1.10
1.10
1.00
10
10
10
10
0.92-0.39
0.97-0.42
0.34-0.25
0.33-0.24
178-175
172-169
1.10
1.10
10
10
1.49-0.65
1.44-0.62
185-183
1.10
10
0.54-0.39
177
1.00
10
0.51-0.38
80
235-230
228-223
236-234
238
1.10
1.10
1.10
1.00
10
10
10
10
1.96-0.84
1.90-0.81
0.68-0.49
0.69-0.50
79
75
79
FT40W/2G11/RS - 40W (PL-L40W, F40BX, FT40DL/RS)
IS
Centium
1
120-277
PS
IS
2
3
120-277
120-277
PS
IS
ICN-1TTP40-SC
ICN-2TTP40-SC
ICN-2S24-N
ICN-2S24-T
ICN-2S39-N
ICN-2S39-T
ICF-2S42-M2-BS
ICF-2S42-M2-LD-K ❿
SmartMate ICF-2S42-M2-LD
ICF-2S42-90C-M2-BS
ICF-2S42-90C-M2-LD
ICN-2TTP40-SC
Centium
ICN-3TTP40-SC
ICF-2S42-M2-BS
ICF-2S42-M2-LD
SmartMate ICF-2S42-M2-LD-K ❿
Centium
ICF-2S42-90C-M2-BS
ICF-2S42-90C-M2-LD
ICN-3TTP40-SC
0/-18
0/-18
0/-18
FT50W/2G11/RS - 50W (PL-L50W, F50BX/RS)
ICN-2S54-N
1
120-277
PS
347-480
2
Centium
120-277
PS
120-277
347-480
4
120-277
347-480
ICN-2S54-T
ICN-2S54-90C-N
ICN-2S54-90C-T
Optanium IOP-2PSP54-SC
Centium HCN-2S54-90C-WL
Optanium HOP-2PSP54-L
347-480
3
ICN-2S54-T
Centium
ICN-2S54-90C-N
ICN-2S54-90C-T
Optanium IOP-2PSP54-SC
Centium HCN-2S54-90C-WL
Optanium HOP-2PSP54-L
ICN-2S54-N
PS
PS
Centium ICN-4S54-90C-2LS-G
Optanium IOP-4PSP54-2LS-G
Centium HCN-4S54-90C-2LS-G
Optanium HOP-4PSP54-2LS-G
Centium ICN-4S54-90C-2LS-G
Optanium IOP-4PSP54-2LS-G
Centium HCN-4S54-90C-2LS-G
Optanium HOP-4PSP54-2LS-G
❿ Replacement/Retrofit ballast kits indicated with suffix K are available to distributors. Refer to page 3-20 for details.
Refer to page 3-37 for dimensions
Refer to pages 3-26, 3-35 & 3-36 for wiring diagrams
Refer to pages 9-23 to 9-27 for lead lengths and shipping data
3-28
Atlas Full Line Catalog 2014-2015
-20/-29
N
T
N
T
B
L
-20/-29
N
T
N
T
B
L
-20/-29
G
73
77
73
77
74A
78
74A
78
75A
80
75A
75
-20/-29
G
ELECTRONIC FLUORESCENT BALLASTS
For 55-80W FT5 Lamps
No. of
Lamps
Input
Volts
Lamp
Starting
Method
HIGH POWER FACTOR
Input
Power
ANSI
(Watts)
Ballast
Factor
Max.
THD
%
Line
Current
(Amps)
58
58
58
58
0.98
0.92
0.98
0.92
15
10
15
10
0.49-0.22
0.49-0.21
0.49-0.22
0.49-0.21
58
58
56
0.90
0.92
1.00
10
10
10
0.49-0.22
0.17-0.13
0.16-0.12
B
112-109
108-105
0.93
0.90
10
10
0.94-0.41
0.90-0.38
ICN-2S54-90C-N
ICN-2S54-90C-T
Optanium IOP-2PSP54-SC
Centium HCN-2S54-90C-WL
112-109
108-105
110-108
0.93
0.90
0.90
10
10
10
0.94-0.41
0.90-0.38
0.92-0.40
N
T
N
T
B
112
109
0.90
1.00
10
10
0.33-0.24
0.32-0.23
Centium ICN-4S54-90C-2LS-G
Optanium IOP-4PSP54-2LS-G
Centium HCN-4S54-90C-2LS-G
Optanium HOP-4PSP54-2LS-G
169-166
164-161
0.90
0.90
10
10
1.41-0.61
1.37-0.59
178-176
0.90
10
0.52-0.37
165
1.00
10
0.48-0.35
80
ICN-4S54-90C-2LS-G
IOP-4PSP54-2LS-G
HCN-4S54-90C-2LS-G
HOP-4PSP54-2LS-G
222-217
217-212
228-226
222
0.90
0.90
0.90
1.00
10
10
10
10
1.86-0.80
1.81-0.77
0.66-0.47
0.64-0.47
-20/-29
75
79
75
90-88
1.00
10
0.74-0.32
0/-18
Ballast
Family
Catalog Number
Min.
Starting
Temp.
(°F/°C)
SOUND RATED A
Dim.
Wiring
Dia.
FT55W/2G11 - 55W (PL-L55W, F55BX, FT55DL)
1
120-277
Centium
PS
347-480
2
120-277
347-480
3
120-277
120-277
347-480
ICN-2S54-N
ICN-2S54-T
Optanium HOP-2PSP54-L
PS
347-480
4
ICN-2S54-90C-T
Optanium IOP-2PSP54-SC
Centium HCN-2S54-90C-WL
Optanium HOP-2PSP54-L
Centium
PS
ICN-2S54-N
ICN-2S54-T
ICN-2S54-90C-N
PS
Centium
Optanium
Centium
Optanium
N
T
-20/-29
N
T
L
-20/-29
L
-20/-29
G
G
73
77
73
77
74A
78
74A
78
75A
80
75A
79
FT80W/2G11 - 80W (PL-L80W, FT80DL)
1
120-277
PS
Centium
ICN-1S80-T
T
73
Refer to pages 3-35 to 3-37 for dimensions and wiring diagrams
Refer to pages 9-23 to 9-27 for lead lengths and shipping data
Atlas Full Line Catalog 2014-2015
3-29
ELECTRONIC FLUORESCENT BALLASTS
For 14-25W T5 Lamps
No. of
Lamps
Input
Volts
Lamp
Starting
Method
HIGH POWER FACTOR
Input
Power
ANSI
(Watts)
Ballast
Factor
Max.
THD
%
Line
Current
(Amps)
17
17
1.07
1.07
10
15
0.14-0.07
0.14-0.07
19
18
33
1.15
1.09
1.04
15
15
10
0.15-0.08
0.06
0.28-0.13
ICN-2S28-T
ICN-3S14-T
32
35
1.06
1.10
10
10
0.27-0.12
0.29-0.13
IOP-2S28-95-SC
IOP-2S28-115-SC
30
37
0.95
1.15
15
10
0.25-0.11
0.30-0.14
GCN-2S28-L
33
1.10
15
0.10
ICN-3S14-T
48
1.00
10
0.40-0.17
ICN-2S28-N
25
1.06
10
0.22-0.10
23
23
27
1.03
0.95
1.15
15
15
15
0.19-0.09
0.19-0.08
0.22-0.10
25
49
46-45
1.05
1.02
1.02
15
10
10
0.08
0.43-0.19
0.38-0.17
IOP-2S28-95-SC
IOP-2S28-115-SC
GCN-2S28-L
44
52
47
0.95
1.15
1.05
10
10
15
0.37-0.16
0.44-0.19
0.14
ICN-2S28-N
ICN-2S28-T
IOP-2S28-95-SC
Optanium
IOP-2S28-115-SC
Centium GCN-2S28-L
ICN-2S28-N
Centium
ICN-2S28-T
IOP-2S28-95-SC
Optanium
IOP-2S28-115-SC
30
28
27
33
30
1.05
1.00
0.95
1.15
1.03
10
10
10
10
10
0.25-0.11
0.24-0.11
0.22-0.10
0.27-0.12
0.09
32/0
58-57
56-55
54
64-63
56
1.00
1.00
0.95
1.15
1.03
10
10
10
10
10
0.49-0.21
0.47-0.20
0.45-0.20
0.54-0.23
0.16
32/0
Ballast
Family
Catalog Number
Min.
Starting
Temp.
(°F/°C)
SOUND RATED A
Dim.
Wiring
Dia.
F14T5 (14W)
1
120-277
Centium
PS
347
2
120-277
3
120-277
Optanium
Centium
347
PS
ICN-2S28-T
Optanium IOP-2S28-115-SC
Centium GCN-2S28-L
ICN-2S28-N
Centium
PS
ICN-2S28-N
Centium
0/-18
0/-18
N
T
B
L
N
T
T
B
L
0/-18
T
73
74
172
74
171
F21T5 (21W)
Centium
1
120-277
PS
347
2
120-277
PS
347
ICN-2S28-T
IOP-2S28-95-SC
Optanium
IOP-2S28-115-SC
Centium GCN-2S28-L
ICN-2S28-N
Centium
ICN-2S28-T
Optanium
Centium
N
0/-18
T
B
73
L
N
T
0/-18
B
74
L
F28T5 (25W)
Centium
1
120-277
PS
347
2
120-277
PS
347
Centium
GCN-2S28-L
Refer to page 3-35 to 3-37 for dimensions and wiring diagrams
Refer to pages 9-23 to 9-27 for lead lengths and shipping data
3-30
Atlas Full Line Catalog 2014-2015
N
T
B
L
N
T
B
L
73
74
ELECTRONIC FLUORESCENT BALLASTS
For 28-35W T5 Lamps
No. of
Lamps
Input
Volts
Lamp
Starting
Method
HIGH POWER FACTOR
Input
Power
ANSI
(Watts)
Ballast
Factor
Max.
THD
%
Line
Current
(Amps)
GCN-2S28-L
ICN-2S28-N
Centium
ICN-2S28-T
IOP-2S28-95-SC
Optanium
IOP-2S28-115-SC
Centium GCN-2S28-L
31
31
30
36
34
61-60
62-61
59-58
71-69
60
1.05
1.00
0.95
1.15
1.08
1.00
1.00
0.95
1.15
1.01
10
10
15
10
10
10
10
15
10
10
0.29-0.12
0.27-0.12
0.25-0.11
0.30-0.13
0.10
0.59-0.23
0.51-0.23
0.55-0.22
0.60-0.26
0.17
ICN-2S28-N
ICN-2S28-T
IOP-2S28-95-SC
Optanium
IOP-2S28-115-SC
40
39
37
44
1.01
1.00
0.95
1.15
10
10
10
10
0.34-0.15
0.34-0.15
0.31-0.14
0.37-0.17
GCN-2S28-L
41
1.06
15
0.12
ICN-2S28-T
77-75
1.00
10
0.64-0.28
Ballast
Family
Catalog Number
Min.
Starting
Temp.
(°F/°C)
SOUND RATED A
Dim.
Wiring
Dia.
F28T5 (28W)
1
120-277
PS
Centium
347
2
120-277
ICN-2S28-N
ICN-2S28-T
IOP-2S28-95-SC
Optanium
IOP-2S28-115-SC
Centium
PS
347
0/-18
N
T
B
73
L
N
T
0/-18
B
74
L
F35T5 (35W)
1
2
120-277
347
120-277
Centium
PS
Centium
PS
Centium
N
T
0/-18
B
73
L
0/-18
T
74
Refer to page 3-35 to 3-37 for dimensions and wiring diagrams
Refer to pages 9-23 to 9-27 for lead lengths and shipping data
Atlas Full Line Catalog 2014-2015
3-31
ELECTRONIC FLUORESCENT BALLASTS
For 22-55W T5 & T5HO Lamps
Input
Volts
Lamp
Starting
Method
Ballast
Family
Catalog Number
HIGH POWER FACTOR
Input
Power
ANSI
(Watts)
Ballast
Factor
Max.
THD
%
Line
Current
(Amps)
25
1.00
15
0.21-0.09
28
26
29
29
49
0.98
1.02
1.09
1.12
0.98
20
10
20
15
10
0.22-0.11
0.22-0.10
0.24-0.11
0.24-0.12
0.41-0.18
51
54
54
1.00
1.07
1.10
10
15
10
0.42-0.18
0.45-0.20
0.46-0.20
38
39-38
40
45
0.95
0.84
0.84
1.03
10
15
10
15
0.32-0.14
0.32-0.14
0.33-0.15
0.38-0.17
Min.
Starting
Temp.
(°F/°C)
SOUND RATED A
Dim.
FC9T5 (22W Circline)
1
2
120-277
120-277
PS
PS
SmartMate ICF-1D38-H1-LD
ICN-2S24-N
ICN-2S24-T
Centium
ICN-2S39-N
ICN-2S39-T
Centium
ICN-2S24-N
ICN-2S24-T
ICN-2S39-N
ICN-2S39-T
0/-18
Size 1
N
T
N
Wiring
Dia.
73
73
T
N
0/-18
T
N
74
T
FC12T5 (40W Circline)
1
2
120-277
120-277
PS
PS
SmartMate ICF-1D38-H1-LD
ICN-2S24-N
ICN-2S24-T
Centium ICN-2S39-N
Centium
ICN-2S39-T
42
0.92
10
0.35-0.16
ICN-2S39-N
81
79
0.91
0.90
10
10
0.68-0.30
0.66-0.29
61
0.85
10
0.51-0.22
ICN-2S39-T
Size 1
N
0/-18
0/-18
T
N
T
N
T
73
73
74
(1) FC9T5 & (1) FC12T5 {(1) 22W & (1) 40W Circline}
ICF-2S42-M2-BS
ICF-2S42-M2-LD
1&1
120-277
PS
SmartMate ICF-2S42-M2-LD-K ❿
ICF-2S42-90C-M2-BS
ICF-2S42-90C-M2-LD
ICN-2S39-N
Centium
ICN-2S39-T
Size 2
159
0/-18
N
66
0.94
10
0.56-0.24
68
1.00
10
0.57-0.25
T
ICN-2S54-N
58
0.95
15
0.49-0.22
N
ICN-2S54-T
58
58
58
0.92
0.95
0.92
10
15
10
0.49-0.21
0.49-0.22
0.49-0.21
55
0.87
10
0.16-0.12
109-107
110-108
109-107
110-108
106
0.90
0.88
0.90
0.88
0.85
10
10
10
10
10
0.91-0.39
0.92-0.39
0.91-0.39
0.92-0.39
0.31-0.22
74
FC12T5/HO (55W Circline)
1
120-277
PS
Centium
347-480
2
120-277
PS
347-480
Centium
ICN-2S54-90C-N
ICN-2S54-90C-T
HCN-2S54-90C-WL
ICN-2S54-N
ICN-2S54-T
ICN-2S54-90C-N
ICN-2S54-90C-T
HCN-2S54-90C-WL
❿ Replacement/Retrofit ballast kits indicated with suffix K are available to distributors. Refer to page 3-20 for details.
Refer to page 3-37 for dimensions
Refer to pages 3-26, 3-35 & 3-36 for wiring diagrams
Refer to pages 9-23 to 9-27 for lead lengths and shipping data
3-32
Atlas Full Line Catalog 2014-2015
-20/-29
T
N
T
L
73
N
-20/-29
T
N
T
L
74
ELECTRONIC FLUORESCENT BALLASTS
For 24-44W T5HO Lamps
No. of
Lamps
Input
Volts
Lamp
Starting
Method
Ballast
Family
Catalog Number
HIGH POWER FACTOR
Input
Power
ANSI
(Watts)
Ballast
Factor
Max.
THD
%
Line
Current
(Amps)
Min.
Starting
Temp.
(°F/°C)
27
26
30
29
1.03
1.02
1.14
1.13
10
10
15
15
0.23-0.10
0.22-0.10
0.25-0.12
0.25-0.11
0/-18
54-53
52
59-58
57
1.04
1.00
1.14
1.12
10
10
10
10
0.45-0.19
0.44-0.19
0.49-0.22
0.48-0.21
0/-18
41
40
43
44
85-83
86-85
0.96
0.90
1.00
1.02
1.00
1.00
15
10
15
10
10
10
0.34-0.15
0.33-0.15
0.36-0.16
0.37-0.16
0.71-0.30
0.72-0.31
52
50
52
50
46
54
53
101
98
101
98
91
102
98
149
142-140
152
145
200-197
185-182
200
192-191
1.07
1.04
1.07
1.04
1.00
1.00
1.00
1.05
1.00
1.05
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
15
10
15
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
0.44-0.20
0.42-0.18
0.44-0.20
0.42-0.18
0.39-0.18
0.16-0.12
0.15-0.11
0.84-0.37
0.83-0.36
0.84-0.37
0.83-0.36
0.77-0.34
0.30-0.22
0.28-0.21
1.25-0.54
1.18-0.52
0.44-0.32
0.42-0.31
1.66-0.71
1.55-0.67
0.58-0.42
0.56-0.41
SOUND RATED A
Dim.
Wiring
Dia.
F24T5/HO (24W)
1
2
120-277
120-277
PS
PS
Centium
Centium
ICN-2S24-N
ICN-2S24-T
ICN-2S39-N
ICN-2S39-T
ICN-2S24-N
ICN-2S24-T
ICN-2S39-N
ICN-2S39-T
F39T5/HO (39W)
1
120-277
PS
Centium
2
120-277
PS
Centium
ICN-2S24-N
ICN-2S24-T
ICN-2S39-N
ICN-2S39-T
ICN-2S39-N
ICN-2S39-T
0/-18
0/-18
N
T
N
T
N
T
N
T
N
T
N
T
N
T
73
74
73
74
F54T5/HO (44W)
1
120-277
Centium
PS
347-480
2
120-277
Centium
PS
347-480
3
120-277
PS
347-480
4
120-277
347-480
Optanium
Centium
Optanium
PS
Optanium
Centium
Optanium
Centium
Optanium
Centium
Optanium
Centium
Optanium
Centium
Optanium
ICN-2S54-N
ICN-2S54-T
ICN-2S54-90C-N
ICN-2S54-90C-T
IOP-2PSP54-SC
HCN-2S54-90C-WL
HOP-2PSP54-L
ICN-2S54-N
ICN-2S54-T
ICN-2S54-90C-N
ICN-2S54-90C-T
IOP-2PSP54-SC
HCN-2S54-90C-WL
HOP-2PSP54-L
ICN-4S54-90C-2LS-G
IOP-4PSP54-2LS-G
HCN-4S54-90C-2LS-G
HOP-4PSP54-2LS-G
ICN-4S54-90C-2LS-G
IOP-4PSP54-2LS-G
HCN-4S54-90C-2LS-G
HOP-4PSP54-2LS-G
5/-15
N
T
N
T
B
L
5/-15
N
T
N
T
B
L
5/-15
5/-15
G
G
73
77
73
77
74
78
74
78
75A
80
75A
80
75
79
75
79
Refer to page 3-35 to 3-37 for dimensions and wiring diagrams
Refer to pages 9-23 to 9-27 for lead lengths and shipping data
Atlas Full Line Catalog 2014-2015
3-33
ELECTRONIC FLUORESCENT BALLASTS
For 49-80W T5HO Lamps
Input
Volts
Lamp
Starting
Method
Ballast
Family
Catalog Number
HIGH POWER FACTOR
Min.
Starting
Temp.
(°F/°C)
SOUND RATED A
Input
Power
ANSI
(Watts)
Ballast
Factor
Max.
THD
%
Line
Current
(Amps)
60
1.10
15
0.50-0.22
57
60
1.04
1.10
10
15
0.48-0.21
0.50-0.22
57
57
58
54-51
1.04
1.00
1.02
1.00
10
10
10
10
0.48-0.21
0.47-0.21
0.18-0.13
0.16-0.10
110
107-104
110
107-104
109-105
1.04
1.00
1.04
1.00
1.00
10
10
10
10
10
0.93-0.40
0.90-0.38
0.93-0.40
0.90-0.38
0.91-0.38
112-109
106-100
1.00
1.00
10
10
0.35-0.25
0.32-0.20
168-165
162-159
175-172
160-154
1.00
1.00
1.00
1.00
10
10
10
10
1.52-0.66
1.35-0.58
0.54-0.39
0.47-0.32
-20/-29
222-216
224-208
223-221
214-206
1.00
1.00
1.00
1.00
10
10
10
10
2.00-0.86
1.79-0.76
0.69-0.50
0.62-0.43
-20/-29
G
62
62
62
62
60
1.02
1.04
1.02
1.04
1.00
10
10
10
10
10
0.52-0.23
0.53-0.23
0.52-0.23
0.53-0.23 -20/-29
0.50 - 0.22
N
T
N
T
B
62
62-57
120-116
118-115
120-116
118-115
117-114
1.02
1.00
1.00
1.00
1.00
1.00
1.00
10
10
10
10
10
10
10
0.18-0.13
0.18-0.12
1.00-0.43
0.98-0.42
1.00-0.43
0.98-0.42 -20/-29
0.98 - 0.41
120-119
116-113
1.00
1.00
10
10
0.35-0.25
0.35-0.23
182-179
176-174
1.00
1.00
10
10
1.52-0.66
1.47-0.83
188-186
180-174
240-234
235-229
1.04
1.00
1.00
1.00
10
10
10
10
0.54-0.39
0.53-0.36
2.00-0.86
1.96-0.83
239-237
240-234
1.00
1.00
10
10
0.69-0.50
0.70-0.48
90-88
1.00
10
0.74-0.32
Dim.
Wiring
Dia.
F54T5/HO (49W)
1
120-277
Centium
PS
347-480
2
120-277
PS
347-480
120-277
3
4
347-480
120-277
347-480
PS
PS
ICN-2S54-N
ICN-2S54-T
ICN-2S54-90C-N
ICN-2S54-90C-T
Optanium IOP-2PSP54-SC
Centium HCN-2S54-90C-WL
Optanium HOP-2PSP54-L
ICN-2S54-N
ICN-2S54-T
Centium
ICN-2S54-90C-N
ICN-2S54-90C-T
Optanium IOP-2PSP54-SC
Centium HCN-2S54-90C-WL
Optanium HOP-2PSP54-L
Centium ICN-4S54-90C-2LS-G
Optanium IOP-4PSP54-2LS-G
Centium HCN-4S54-90C-2LS-G
Optanium HOP-4PSP54-2LS-G
Centium ICN-4S54-90C-2LS-G
Optanium IOP-4PSP54-2LS-G
Centium HCN-4S54-90C-2LS-G
Optanium HOP-4PSP54-2LS-G
-20/-29
N
T
N
T
B
L
-20/-29
N
T
N
T
B
L
G
73
77
73
77
74
78
74
78
75A
80
75A
80
75
79
75
79
F54T5/HO (54W)
1
120-277
PS
347-480
120-277
2
PS
347-480
3
4
120-277
PS
347-480
120-277
347-480
PS
ICN-2S54-N
ICN-2S54-T
Centium
ICN-2S54-90C-N
ICN-2S54-90C-T
Optanium IOP-2PSP54-SC
Centium HCN-2S54-90C-WL
Optanium HOP-2PSP54-L
ICN-2S54-N
ICN-2S54-T
Centium
ICN-2S54-90C-N
ICN-2S54-90C-T
Optanium IOP-2PSP54-SC
Centium HCN-2S54-90C-WL
Optanium HOP-2PSP54-L
Centium ICN-4S54-90C-2LS-G
Optanium IOP-4PSP54-2LS-G
Centium HCN-4S54-90C-2LS-G
Optanium HOP-4PSP54-2LS-G
Centium ICN-4S54-90C-2LS-G
Optanium IOP-4PSP54-2LS-G
Centium HCN-4S54-90C-2LS-G
Optanium HOP-4PSP54-2LS-G
L
N
T
N
T
B
L
-20/-29
G
-20/-29
G
0/-18
T
73
77
73
77
74
78
74
78
75A
80
75A
80
75
79
75
79
F80T5/HO (80W)
1
3-34
120-277
PS
Atlas Full Line Catalog 2014-2015
Centium
ICN-1S80-T
73
Refer to page 3-35 to 3-37 for dimensions and wiring diagrams. Refer to pages 9-23 to 9-27 for lead lengths and shipping data
ELECTRONIC FLUORESCENT BALLASTS
T5 and T5HO Wiring Diagrams
BLUE
BLUE
BLACK
BALLAST
BLUE
BLACK/WHITE
BALLAST
WHITE
WHITE
BLUE
WHITE
RED
RED
Diag. 70
BLUE
BLACK
BALLAST
BLUE
RED
Diag. 71
Diag. 72
RED
RED
BLACK
LINE
WHITE
YELLOW
YELLOW
BALLAST
BLUE
BLUE
GREEN
BALLAST
BLACK
WHITE
RED
RED
YELLOW
YELLOW
BLUE
BLUE
GREEN
BLACK
WHITE
BALLAST
RED
RED
YELLOW
YELLOW
BLUE
BLUE
LAMP
LAMP
LAMP
FOR 1 LAMP OPERATION, DO NOT USE YELLOW LEADS
Diag. 74
Diag. 73
3-LAMP
Diag. 74A
4-LAMP
ORANGE
ORANGE
LAMP
LAMP
BLACK
WHITE
NEUTRAL OR
(ANY HOT)
S
ON
OFF
GREY/RED
BALLAST
RED
BLUE
BROWN
YELLOW
RED
BLUE
BLACK
LAMP
WHITE
NEUTRAL OR
(ANY HOT)
LAMP
GREY/RED
BALLAST
S
S
S
LAMPS
ON
OFF
3 LAMPS ON
2 LAMPS ON
Diag. 75A
BROWN
YELLOW
LAMP
LAMP
LAMP
LAMPS
4 LAMPS ON
2 LAMPS ON
Diag. 75
Atlas Full Line Catalog 2014-2015
3-35
ELECTRONIC FLUORESCENT BALLASTS
T5 and T5HO Wiring Diagrams
BLACK
WHITE
YELLOW
YELLOW
LINE
BALLAST
BLUE*
BLUE*
BLACK
WHITE
YELLOW
YELLOW
LINE
RED
RED
BALLAST
*INSULATE BLUE LEADS INDIVIDUALLY FOR
LAMP
600 V
Diag. 78
Diag
. 78
Diag. 77
Diag . 77
BLACK
WHITE
BALLAST
GRAY /RED
neutral or any hot
S
S LAMPS
ON 4 LAMPS ON
OFF 2 LAMPS ON (RED and BLUE/WHITE )
RED
RED
LAMP
LAMP
LINE
BLUE
BLUE
BLUE /WHITE
BROWN
BLUE
RED
YELLOW
/BLUE
BLACK
WHITE
LINE
GRAY /RED
neutral or any hot
BALLAST
S
S LAMPS
ON 3 LAMPS ON
OFF 2 LAMPS ON (RED and BLUE/WHITE )
BLUE /WHITE
BROWN*
BLUE
RED
YELLOW
/BLUE
LAMP
LAMP
LAMP
LAMP
LAMP
*INSULATE BROWN LEADS INDIVIDUALLY FOR
LAMP
LAMP
600 V
Diag. 80
Diag. 79
Diag
. 79
Diag . 80
3-LAMP
2-LAMP
GREEN
BLACK
WHITE
BALLAST
YELLOW
YELLOW
BLUE
BLUE
BLUE/WHT
BLUE/WHT
RED
RED
GREEN
BLACK
WHITE
BALLAST
LAMP
LAMP
LAMP
LAMP
3-36
Atlas Full Line Catalog 2014-2015
BLUE/WHT
BLUE/WHT
RED
RED
LAMP
Diag. 172
YELLOW
YELLOW
BLUE
BLUE
Diag. 171
ELECTRONIC FLUORESCENT BALLASTS
1.18"
T5 and T5HO Dimensions
0"
8.9
"
9.5
4"
16.3
1.18"
1.7
0"
16.7
1.70"
"
Fig. G
Fig. B
1.0”
1.00"
8.9”
16.34"
1.3”
9.5”
16.70"
1.18"
Fig. N
Fig. L
1.18"
1.06"
14.17"
13.78"
Fig. T
Includes connectors with no leads
2.40"
3.00"
2.00"
0.98"
2.00"
1.29"
4.20"
4.20"
4.60"
4.60"
Size 1
Size 2
Atlas Full Line Catalog 2014-2015
3-37
ELECTRONIC FLUORESCENT BALLASTS
For 17W T8 Lamps
No. of
Lamps
Input
Volts
HIGH POWER FACTOR
Input
Power
ANSI
(Watts)
Ballast
Factor
Max.
THD
%
AmbiStar ‡ REB-2P32-SC
19
1.02
ICN-132-MC
ICN-1P32-N
17
19
0.88
0.93
22
Lamp
Starting
Method
Ballast
Family
Catalog Number
SOUND RATED A
Line
Current
(Amps)
Min.
Starting
Temp.
(°F/°C)
150
0.30
0/-18
20
15
0.14-0.06
0.16-0.07
0/-18
1.07
15
0.18-0.09
15
0.80
10
0.13-0.06
N
16
0.90
10
0.14-0.07
N
22
1.23
15
0.19-0.08
B
N
18
0.90
20
0.15-0.07
19
1.06
15
0.17-0.08
25
1.42
20
0.21-0.10
14
0.79
10
0.12-0.05
16
16
0.97
0.79
10
10
0.14-0.07
0.13-0.06
19
39
15
1.00
1.34
0.80
10
10
0.16-0.07
0.20-0.11
0.05
16
17
20
0.93
0.89
1.07
20
19
40
0.78
1.08
1.30
Dim.
Wiring
Dia.
F17T8, FBO16T8 (17W)
120
IS
Centium
IS
120-277
1
PS
347
347-480
IS
PS
ICN-2P32-N
IOP-1P32-LW-N
IOPA-1P32-LW-N
IOP-1P32-N
IOPA-1P32-N
IOP-1P32-HL-SC
IOPA-1P32-HL-N
IOP-2P32-LW-N
IOPA-2P32-LW-N
Optanium IOP-2P32-N
IOPA-2P32-N
IOP-2P32-HL-N
IOPA-2P32HL-N
IOP-1PSP32-LW-N
IOP-1PSP32-N
IOP-2PSP-32-LW-N
IOP-2PSP32-N
IOP-2PSP32-HL-N
GOPA-1P32-LW-SC
GOPA-1P32-SC
GOPA-2P32-LW-SC
Optanium GOPA-2P32-SC
GOP-2PSP32-LW-SC
GOP-2PSP32-SC
HOP-2PSP32-HL-L
‡ The above AmbiStar ballasts are normal power factor and labeled ‘For Residential Use Only’
9.50"
0.06
0.06
0.12-0.10
N
-20/-29
N
0/-18
63
*64
N
77
63
-20/-29
B
0/-18
*64
77
L
"
8.9”
9.5”
"
Refer to page 3-40 and 3-41 for wiring diagrams
Refer to pages 9-23 to 9-27 for lead lengths and shipping data
Atlas Full Line Catalog 2014-2015
*64
0"
8.9
1.7
Fig. A2
3-38
63
20
9.5
1.08"
*64
1.0”
1.18"
8.91"
1.05"
10
0.06
0.06
0.06
B
A2
Fig. B
Fig. N
1.3”
ELECTRONIC FLUORESCENT BALLASTS
For 17W T8 Lamps
No. of
Lamps
Input
Volts
HIGH POWER FACTOR
SOUND RATED A
Input
Power
ANSI
(Watts)
Ballast
Factor
Max.
THD
%
Line
Current
(Amps)
Min.
Starting
Temp.
(°F/°C)
Dim.
Wiring
Dia.
AmbiStar ‡ REB-2P32-SC
31
0.91
140
0.45
0/-18
B
64
ICN-2M32-MC
ICN-2P32-N
ICN-3P32-N
IOP-2P32-LW-N
IOPA-2P32-LW-N
IOP-2P32-N
IOPA-2P32-N
IOP-2P32-HL-N
IOPA-2P32HL-N
IOP-3P32-LW-N
Optanium IOPA-3P32LW-N
IOP-3P32-N
IOPA-3P32-N
IOP-3P32-HL-N
IOPA-3P32-HL-N
IOP-2PSP-32-LW-N
31
33
38
0.88
0.93
1.07
10
15
15
0.26-0.11
0.28-0.13
0.32-0.14
0/-18
27
0.80
10
0.23-0.10
31
0.90
10
0.26-0.11
41
1.23
15
0.34-0.15
31
0.87
20
0.26-0.12
35
1.01
15
0.30-0.14
47
1.37
10-30
0.39-0.20
Lamp
Starting
Method
Ballast
Family
Catalog Number
F17T8, FBO16T8 (17W)
120
IS
Centium
IS
120-277
2
IOP-2PSP32-N
IOP-2PSP32-HL-N
PS
347
347-480
IS
PS
GOPA-2P32-LW-SC
GOPA-2P32-SC
GOPA-3P32-LW-SC
Optanium GOPA-3P32-SC
GOP-2PSP32-LW-SC
GOP-2PSP32-SC
HOP-2PSP32-HL-L
‡ The above AmbiStar ballasts are normal power factor and labeled ‘For Residential Use Only’
4"
16.3
1.18"
25-24
0.71
10
0.20-0.09
30
66-64
0.88
1.17
10
10
0.25-0.11
0.33-0.15
27
30
30
34
30
31
67
0.78
0.88
0.87
1.01
10
0.08
0.09
0.09
0.10
0.09
0.09
0.21-0.15
0.71
0.88
1.20
1.00"
A2
N
64
*65
N
64
N
*65
0/-18
N
21
-20/-29
B
-20/-29
64
0/-18
B
L
*65
21
16.34"
0"
16.7
16.70"
1.18"
1.70"
Fig. G
Fig. L
Refer to page 3-38 for additional dimensions
Refer to page 3-40 and 3-41 for wiring diagrams
Refer to pages 9-23 to 9-27 for lead lengths and shipping data
Atlas Full Line Catalog 2014-2015
3-39
ELECTRONIC FLUORESCENT BALLASTS
For 17W T8 Lamps
No. of
Lamps
Lamp
Starting
Method
Input
Volts
Ballast
Family
HIGH POWER FACTOR
Catalog Number
Input
Power
ANSI
(Watts)
Ballast
Factor
Max.
THD
%
44
0.81
48
53
0.92
1.04
40
SOUND RATED A
Line
Current
(Amps)
Min.
Starting
Temp.
(°F/°C)
Dim.
Wiring
Dia.
135
0.87
0/-18
B
*66
15
15
0.39-0.17
0.45-0.20
0/-18
N
65
*66
0.81
10
0.34-0.15
45
0.90
10
0.38-0.17
N
65
59
1.22
10-15
0.49-0.22
43
0.85
20
0.36-0.17
49
1.00
15
0.41-0.18
69
1.28
10
0.56-0.26
F17T8, FBO16T8 (17W)
IS
120
AmbiStar ‡ REB-4P32-SC
Centium
IS
ICN-3P32-N
ICN-4P32-N
IOP-3P32-LW-N
IOPA-3P32LW-N
IOP-3P32-N
IOPA-3P32-N
IOP-3P32-HL-N
IOPA-3P32-HL-N
IOP-4P32-LW-N
IOPA-4P32-LW-N
IOP-4P32-N
Optanium IOPA-4P32-N
IOP-4P32-HL-SC
IOPA-4P32-HL-SC
120-277
3
IOP-3PSP32-LW-SC
IOP-3PSP32-SC
IOP-3PSP32-HL-SC
IOP-4PSP32-LW-SC
PS
IOP-4PSP32-SC
IOP-4PSP32-HL-G
IS
347
PS
347-480
GOPA-3P32-LW-SC
GOPA-3P32-SC
GOPA-4P32-LW-SC
GOPA-4P32-SC
Optanium
GOP-3PSP32-SC
GOP-4PSP32-LW-SC
GOP-4PSP32-SC
HOP-4PSP32-HL-G
39
0.72
10
0.33-0.15
47
62
0.90
1.22
10
10
0.39-0.17
0.52-0.23
40
47
0.81
1.00
10
10
0.34-0.15
0.40-0.18
69
39
44
45
50
46
46
46
69
1.35
0.81
0.92
0.82
1.00
0.88
0.74
0.93
1.32
10
0.57-0.26
0.12
0.13
0.13
0.15
0.14
0.14
0.14
0.21-0.15
10
-20/-29
N
B
178
0/-18
G
65
-20/-29
B
LINE
BLUE
BLUE
WHITE
YELLOW
YELLOW
BLK/WHT
WHITE
BLACK
BALLAST
G
LAMP
LAMP
DIAG. 20
Refer to page 3-38 and 3-39 for dimensions
Refer to page 3-41 for additional wiring diagrams
Refer to pages 9-23 to 9-27 for lead lengths and shipping data
Atlas Full Line Catalog 2014-2015
BLUE
BLUE
RED
RED
LINE
BLACK
WHITE
YELLOW
YELLOW
BALLAST
BLUE*
BLUE*
RED
RED
RED
RED
Diag. 20
3-40
BALLAST
LAMP
LAMP
*INSULATE BLUE LEADS INDIVIDUALLY FOR
Diag. 21
Diag. 77
Diag . 77
*66
178
0/-18
‡ The above AmbiStar ballasts are normal power factor and labeled ‘For Residential Use Only’
LINE
*66
600 V
ELECTRONIC FLUORESCENT BALLASTS
For 17W T8 Lamps
No. of
Lamps
Lamp
Starting
Method
Input
Volts
Ballast
Family
HIGH POWER FACTOR
Catalog Number
SOUND RATED A
Input
Power
ANSI
(Watts)
Ballast
Factor
Max.
THD
%
Line
Current
(Amps)
Min.
Starting
Temp.
(°F/°C)
Dim.
52
64
0.82
0.93
135
10
1.00
0.54-0.23
0/-18
0/-18
B
N
53
0.81
10
0.45-0.20
58
0.90
10
0.49-0.22
80
1.22
10
0.67-0.30
54
60
82
53
60
0.76
0.90
1.24
0.79
0.93
10
10
10
54
54
82
0.71
0.88
1.22
0.45-0.20
0.50-0.22
0.68-0.29
0.16
0.17
0.16
0.16
0.24-0.18
Wiring
Dia.
F17T8, FBO16T8 (17W)
IS
120
IS
120-277
4
PS
IS
347
PS
347-480
AmbiStar ‡ REB-4P32-SC
Centium ICN-4P32-N
IOP-4P32-LW-N
IOPA-4P32-LW-N
IOP-4P32-N
IOPA-4P32-N
Optanium IOP-4P32-HL-SC
IOPA-4P32-HL-SC
IOP-4PSP-32-LW-SC
IOP-4PSP32-SC
IOP-4PSP32-HL-G
GOPA-4P32-LW-SC
GOPA-4P32-SC
Optanium GOP-4PSP32-LW-SC
GOP-4PSP32-SC
HOP-4PSP32-HL-G
‡ The above AmbiStar ballasts are normal power factor and labeled ‘For Residential Use Only’
10
66
N
-20/-29
66
N
B
B
0/-18
177
G
-20/-29
66
B
177
0/-18
G
WHITE
BLACK
WHITE
BLACK
WHITE
BLACK
LAMP
BLUE
LINE
LAMP
LAMP
LINE
BLACK
BALLAST
*FOR TWO LAMP OPERATION,
INSULATE UNUSED BLUE LEADS INDIVIDUALLY FOR 600V
*FOR SINGLE LAMP OPERATION,
INSULATE UNUSED BLUE LEAD FOR 600V
Diag. 63
WHITE
LAMP
LAMP
LAMP
YELLOW
YELLOW
BLUE
RED
BALLAST
RED
LINE
BLUE
RED
BLUE
BLUE
BALLAST
BLUE
BALLAST
Diag. 65
Diag. 64
BLUE
BLUE
RED
RED
BLUE/WHITE
BLACK
LINE
WHITE
BROWN
BALLAST
BLUE
BLUE/WHITE
BLACK
LINE
WHITE
BALLAST
RED
LAMP
BLUE
RED
YELLOW
YELLOW
LAMP
LINE
LAMP
LAMP
*FOR THREE LAMP OPERATION,
INSULATE UNUSED BLUE LEADS INDIVIDUALLY FOR 600V
Diag. 66
LAMP
LAMP
LAMP
LAMP
LAMP
LAMP
LAMP
Diag. 177
Diag. 178
Refer to page 3-38 and 3-39 for dimensions
Refer to pages 9-23 to 9-27 for lead lengths and shipping data
Atlas Full Line Catalog 2014-2015
3-41
ELECTRONIC FLUORESCENT BALLASTS
For 25W-36" T8 Lamps
No. of
Lamps
Input
Volts
Lamp
Starting
Method
HIGH POWER FACTOR
Input
Power
ANSI
(Watts)
Ballast
Factor
Max.
THD
%
AmbiStar ‡ REB-2P32-SC
26
1.00
ICN-132-MC
23
0.88
ICN-1P32-N
ICN-2P32-N
IOP-1P32-LW-N
IOPA-1P32-LW -N
IOP-1P32-N
IOPA-1P32-N
26
29
Ballast
Family
Catalog Number
SOUND RATED A
Line
Current
(Amps)
Min.
Starting
Temp.
(°F/°C)
150
0.39
0/-18
15
0.19-0.09
0.91
1.06
10
15
0.22-0.10
0.24-0.11
21
0.78
10
0.17-0.08
N
23
0.88
10
0.20-0.09
N
30
1.22
10
0.26-0.11
B
N
24
0.90
10
0.20-0.09
28
1.05
10
0.23-0.10
35
1.40
20
0.29-0.13
20
22
21
25
35
0.74
0.92
0.77
0.97
1.35
10
10
10
10
10
0.16-0.07
0.19-0.08
0.17-0.08
0.21-0.10
0.29-0.13
20
0.80
0.07
22
24
0.91
0.88
27
26
1.05
0.77
0.07
0.08
0.08
0.08
26
35
1.05
1.30
Dim.
Wiring
Dia.
B
*64
F25T8, FBO24T8 (25W - 36")
120
IS
Centium
IS
120-277
1
IOP-1P32-HL-SC
IOPA-1P32-HL-N
IOP-2P32-LW-N
IOPA-2P32-LW-N
Optanium IOP-2P32-N
IOPA-2P32-N
IOP-2P32-HL-N
IOPA-2P32HL-N
IOP-1PSP32-LW-N
IOP-1PSP32-N
PS
IS
347
347-480
PS
IOP-2PSP32-LW-N
IOP-2PSP32-N
IOP-2PSP32-HL-N
GOPA-1P32-LW-SC
GOPA-1P32-SC
GOPA-2P32-LW-SC
Optanium GOPA-2P32-SC
GOP-2PSP32-LW-SC
GOP-2PSP32-SC
HOP-2PSP32-HL-L
‡ The above AmbiStar ballasts are normal power factor and labeled ‘For Residential Use Only’
Refer to page 3-38 and 3-39 for dimensions
Refer to page 3-40 and 3-41 for wiring diagrams
Refer to pages 9-23 to 9-27 for lead lengths and shipping data
3-42
Atlas Full Line Catalog 2014-2015
10
0.08
0.11-0.09
A2
0/-18
-20/-29
N
N
63
*64
63
*64
20
0/-18
N
77
-20/-29
63
B
*64
77
0/-18
L
ELECTRONIC FLUORESCENT BALLASTS
For 25W-36" T8 Lamps
No. of
Lamps
Input
Volts
Lamp
Starting
Method
Ballast
Family
Catalog Number
HIGH POWER FACTOR
Input
Power
ANSI
(Watts)
Ballast
Factor
Max.
THD
%
Line
Current
(Amps)
Min.
Starting
Temp.
(°F/°C)
SOUND RATED A
Dim.
Wiring
Dia.
F25T8, FBO24T8 (25W - 36")
120
IS
AmbiStar ‡
Centium
IS
120-277
Optanium
2
PS
IS
347
347-480
PS
REB-2P32-SC
ICN-2M32-MC
ICN-2P32-N
ICN-3P32-N
IOP-2P32-LW-N
IOPA-2P32-LW-N
IOP-2P32-N
IOPA-2P32-N
IOP-2P32-HL-N
IOPA-2P32-HL-N
IOP-3P32-LW-N
IOPA-3P32LW-N
IOP-3P32-N
IOPA-3P32-N
IOP-3P32-HL-N
IOPA-3P32-HL-N
IOP-2PSP32-LW-N
IOP-2PSP32-N
IOP-2PSP32-HL-N
GOPA-2P32-LW-SC
GOPA-2P32-SC
GOPA-3P32-LW-SC
Optanium GOPA-3P32-SC
GOP-2PSP32-LW-SC
GOP-2PSP32-SC
HOP-2PSP32-HL-L
43
44
48
51
0.89 130
0.88 15
0.91 10
1.03 15
0.61
0.37-0.16
0.40-0.18
0.43-0.19
39
0.78
10
0.32-0.14
43
0.88
10
0.37-0.16
57
1.20
10
0.48-0.21
43
0.86
10
0.36-0.16
49
1.00
10
0.42-0.18
64
1.32 10-15 0.54-0.24
35-34
0.71
10
43
58-57
38
44
42
48
41
0.88
1.16
0.78
0.88
0.85
1.01
0.71
10
10
43
59
0.88
1.20
10
0.29-0.13
0.36-0.16
0.48-0.21
0.12
0.13
0.12
0.14
0.12
0.13
0.18-0.13
0/-18
B
A2
N
64
64
*65
N
64
N
*65
N
21
-20/-29
0/-18
64
-20/-29
B
0/-18
*65
21
‡ The above AmbiStar ballasts are normal power factor and labeled ‘For Residential Use Only’
Refer to page 3-38 and 3-39 for dimensions
Refer to page 3-40 and 3-41 for wiring diagrams
Refer to pages 9-23 to 9-27 for lead lengths and shipping data
Atlas Full Line Catalog 2014-2015
3-43
ELECTRONIC FLUORESCENT BALLASTS
For 25W-36" T8 Lamps
No. of
Lamps
Input
Volts
Lamp
Starting
Method
Ballast
Family
Catalog Number
Input
Power
ANSI
(Watts)
HIGH POWER FACTOR
Ballast
Factor
Max.
THD
%
SOUND RATED A
Line
Current
(Amps)
Min.
Starting
Temp.
(°F/°C)
Dim.
Wiring
Dia.
0/-18
B
N
N
*66
65
*66
F25T8, FBO24T8 (25W - 36")
120
IS
AmbiStar ‡
Centium
IS
120-277
Optanium
3
PS
IS
347
PS
347-480
REB-4P32-SC
ICN-3P32-N
ICN-4P32-N
IOP-3P32-LW-N
IOPA-3P32LW-N
IOP-3P32-N
IOPA-3P32-N
IOP-3P32-HL-N
IOPA-3P32-HL-N
IOP-4P32-LW-N
IOPA-4P32-LW-N
IOP-4P32-N
IOPA-4P32-N
IOP-4P32-HL-SC
IOPA-4P32-HL-SC
IOP-3PSP32-LW-SC
IOP-3PSP32-SC
IOP-3PSP32-HL-SC
IOP-4PSP32-LW-SC
IOP-4PSP32-SC
IOP-4PSP32-HL-G
GOPA-3P32-LW-SC
GOPA-3P32-SC
GOPA-4P32-LW-SC
GOPA-4P32-SC
Optanium
GOP-3PSP32-SC
GOP-4PSP32-LW-SC
GOP-4PSP32-SC
HOP-4PSP32-HL-G
‡ The above AmbiStar ballasts are normal power factor and labeled ‘For Residential Use Only’
Refer to page 3-38 and 3-39 for dimensions
Refer to page 3-40 and 3-41 for wiring diagrams
Refer to pages 9-23 to 9-27 for lead lengths and shipping data
3-44
Atlas Full Line Catalog 2014-2015
63
67
74
0.86 125
0.90 10
1.01 10
1.14
0.56-0.24
0.62-0.27
57
0.79
10
0.48-0.21
N
64
0.88
10
0.54-0.24
N
84
1.20
10
0.70-0.31
62
0.85
10
0.52-0.22
71
0.97
10
0.59-0.26
N
94
1.28
10
0.80-0.35
B
57
66
88
0.72
0.89
1.20
10
10
10
0.48-0.21
0.55-0.24
0.73-0.32
56
65
96
56
63
62
70
67
65
66
96
0.80
0.99
1.32 0.77
0.90
0.81
0.96
0.88
0.74
0.93
1.30
10
10
10
10
0.47-0.21
0.55-0.24
0.80-0.35
0.16
0.18
0.18
0.20
0.20
0.19
0.19
0.29-0.21
10
10
10
10
10
10
10
-20/-29
0/-18
65
N
N
B
*66
178
G
-20/-29
0/-18
65
B
B
G
*66
178
ELECTRONIC FLUORESCENT BALLASTS
For 25W-36" T8 Lamps
No. of
Lamps
Input
Volts
Lamp
Starting
Method
Ballast
Family
Catalog Number
HIGH POWER FACTOR
Input
Power
ANSI
(Watts)
Ballast
Factor
Max.
THD
%
SOUND RATED A
Line
Current
(Amps)
Min.
Starting
Temp.
(°F/°C)
Dim.
0/-18
B
N
Wiring
Dia.
F25T8, FBO24T8 (25W - 36")
120
IS
IS
120-277
4
PS
IS
347
347-480
PS
REB-4P32-SC
ICN-4P32-N
IOP-4P32-LW-N
IOPA-4P32-LW-N
IOP-4P32-N
IOPA-4P32-N
IOP-4P32-HL-SC
Optanium
IOPA-4P32-HL-SC
IOP-4PSP32-LW-SC
IOP-4PSP32-SC
IOP-4PSP32-HL-G
GOPA-4P32-LW-SC
GOPA-4P32-SC
77
89
0.81 125
0.91 10
1.31
0.74-0.32
76
0.79
10
0.64-0.27
85
0.88
10
0.72-0.31
1.20
10
0.96-0.41
0.72 10
0.90 10
1.22 10
0.62-0.27
0.71-0.31
0.96-0.42
0/-18
74
86
0.79
0.91
0.22
0.25
-20/-29
Optanium GOP-4PSP32-LW-SC
GOP-4PSP32-LW-SC
HOP-4PSP32-HL-G
75
80
115
0.71
0.88
1.20
0.22
0.23
0.34-0.25
0/-18
AmbiStar ‡
Centium
113
73
85
115
10
10
10
10
10
66
N
-20/-29
N
66
B
B
G
177
66
B
177
G
‡ The above AmbiStar ballasts are normal power factor and labeled ‘For Residential Use Only’
Refer to page 3-38 and 3-39 for dimensions
Refer to page 3-40 and 3-41 for wiring diagrams
Refer to pages 9-23 to 9-27 for lead lengths and shipping data
Atlas Full Line Catalog 2014-2015
3-45
ELECTRONIC FLUORESCENT BALLASTS
For 25W-48" T8/ES Lamps
No. of
Lamps
Lamp
Starting
Method
Input
Volts
Ballast
Family
Input
Power
ANSI
(Watts)
Catalog Number
HIGH POWER FACTOR
Ballast
Factor
Max.
THD
%
Line
Current
(Amps)
Min.
Starting
Temp.
(°F/°C)
SOUND RATED A
Dim.
Wiring
Dia.
F32T8/ES (25W - 48")
IS
120-277
1
PS
IS
347
347-480
PS
IOP-1P32-LW-N
IOPA-1P32-LW-N
IOP-1P32-N
IOPA-1P32-N
IOP-1P32-HL-SC
IOPA-1P32-HL-N
IOP-2P32-LW-N
IOPA-2P32-LW-N
IOP-2P32-N
Optanium
IOPA-2P32-N
IOP-2P32-HL-N
IOPA-2P32HL-N
IOP-1PSP32-LW-N
IOP-1PSP32-N
IOP-2PSP32-LW-N
IOP-2PSP32-N
IOP-2PSP32-HL-N
GOPA-1P32-LW-SC
GOPA-1P32-SC
GOPA-2P32-LW-SC
Optanium GOPA-2P32-SC
GOP-2PSP32-LW-SC
GOP-2PSP32-SC
HOP-2PSP32-HL-L
LINE
LINE
WHITE
BLUE
BLUE
BALLAST
10
0.17-0.07
N
23
0.87
10
0.20-0.09
N
32
1.21
10
0.26-0.12
B
N
24
0.90
10
0.20-0.09
27
1.05
10
0.23-0.10
37
1.40
15
0.31-0.14
21
24
22
27
36
0.72
0.88
0.77
0.94
1.28
10 0.17-0.07
10
0.20-0.08
10
0.18-0.08
10
0.23-0.10
10 0.30-0.14
21
0.77
23
25
27
27
28
37
0.88
0.88
1.04
0.77
1.04
1.28
WHITE
BALLAST
RED
RED
LAMP
LAMP
Diag. 20
DIAG. 20
Refer to page 3-38 and 3-39 for dimensions
Refer to page 3-47 for additional wiring diagrams
Refer to pages 9-23 to 9-27 for lead lengths and shipping data
3-46
0.77
BLACK
YELLOW
YELLOW
BLK/WHT
21
Atlas Full Line Catalog 2014-2015
10
0.06
0.06
0.07
0.09
0.08
60/16
RED
RED
*64
20
N
77
63
60/16
0.08
.12-0.09
BLUE
BLUE
N
63
LINE
B
L
BLACK
WHITE
YELLOW
YELLOW
*64
77
BALLAST
BLUE*
BLUE*
RED
RED
LAMP
LAMP
*INSULATE BLUE LEADS INDIVIDUALLY FOR
Diag. 21
Diag. 77
Diag . 77
600 V
ELECTRONIC FLUORESCENT BALLASTS
For 25W-48" T8/ES Lamps
No. of
Lamps
Input
Volts
Lamp
Starting
Method
Ballast
Family
Input
Power
ANSI
(Watts)
Catalog Number
HIGH POWER FACTOR
Ballast
Factor
Max.
THD
%
Min.
Starting
Temp.
(°F/°C)
Line
Current
(Amps)
SOUND RATED A
Dim.
Wiring
Dia.
N
64
N
*65
N
21
F32T8/ES (25W - 48")
IS
120-277
2
PS
347
347-480
IS
PS
IOP-2P32-LW-N
IOPA-2P32-LW-N
IOP-2P32-N
IOPA-2P32-N
IOP-2P32-HL-N
IOPA-2P32HL-N
IOP-3P32-LW-N
IOPA-3P32LW-N
Optanium
IOP-3P32-N
IOPA-3P32-N
IOP-3P32-HL-N
IOPA-3P32-HL-N
IOP-2PSP32-LW-N
IOP-2PSP32-N
IOP-2PSP32-HL-N
GOPA-2P32-LW-SC
GOPA-2P32-SC
GOPA-3P32-LW-SC
Optanium GOPA-3P32-SC
GOP-2PSP32-LW-SC
GOP-2PSP32-SC
HOP-2PSP32-HL-L
38
0.77
10
0.32-0.14
44-43
0.87
10
0.37-0.06
60
1.19
10
0.50-0.22
43
0.86
10
0.36-0.16
49
1.00
10
0.42-0.18
70
1.32 10-20 0.59-0.27
37-36
46-45
61-59
39
0.71
0.88
1.18
44
43
48
0.78
0.88
0.86
1.00
43
46
62
0.71
0.88
1.18
10
10
10
10
60/16
0.31-0.13
0.39-0.17
0.51-0.22
0.12
0.13
0.13
0.14
64
B
60/16
0.08
0.14
0.18-0.14
*65
21
L
WHITE
BLACK
WHITE
BLACK
WHITE
BLACK
LAMP
BLUE
LINE
LAMP
LAMP
LINE
BLACK
BALLAST
*FOR TWO LAMP OPERATION,
INSULATE UNUSED BLUE LEADS INDIVIDUALLY FOR 600V
*FOR SINGLE LAMP OPERATION,
INSULATE UNUSED BLUE LEAD FOR 600V
Diag. 63
WHITE
LAMP
LAMP
LAMP
YELLOW
YELLOW
BLUE
RED
BALLAST
RED
LINE
BLUE
RED
BLUE
BLUE
BALLAST
BLUE
BALLAST
Diag. 65
Diag. 64
BLUE
BLUE
RED
RED
BLUE/WHITE
BLACK
LINE
WHITE
BROWN
BALLAST
BLUE
BLUE/WHITE
BLACK
LINE
WHITE
BALLAST
RED
LAMP
BLUE
RED
YELLOW
YELLOW
LAMP
LINE
LAMP
LAMP
*FOR THREE LAMP OPERATION,
INSULATE UNUSED BLUE LEADS INDIVIDUALLY FOR 600V
Diag. 66
LAMP
LAMP
LAMP
LAMP
LAMP
LAMP
LAMP
Diag. 177
Diag. 178
Refer to page 3-38 and 3-39 for dimensions
Refer to page 3-46 for additional wiring diagrams
Refer to pages 9-23 to 9-27 for lead lengths and shipping data
Atlas Full Line Catalog 2014-2015
3-47
ELECTRONIC FLUORESCENT BALLASTS
For 25W-48" T8/ES Lamps
No. of
Lamps
Input
Volts
Lamp
Starting
Method
Ballast
Family
Catalog Number
Input
Power
ANSI
(Watts)
HIGH POWER FACTOR
Ballast
Factor
Max.
THD
%
Line
Current
(Amps)
Min.
Starting
Temp.
(°F/°C)
SOUND RATED A
Dim.
Wiring
Dia.
N
65
F32T8/ES (25W - 48")
IS
120-277
Optanium
3
PS
IS
347
PS
347/480
IS
120-277
4
PS
IS
347
PS
347-480
IOP-3P32-LW-N
IOPA-3P32LW-N
IOP-3P32-N
IOPA-3P32-N
IOP-3P32-HL-N
IOPA-3P32-HL-N
IOP-4P32-LW-N
IOPA-4P32-LW-N
IOP-4P32-N
IOPA-4P32-N
IOP-4P32-HL-SC
IOPA-4P32-HL-SC
IOP-3PSP32-LW-SC
IOP-3PSP32-SC
IOP-3PSP32-HL-SC
IOP-4PSP32-LW-SC
IOP-4PSP32-SC
IOP-4PSP32-HL-G
GOPA-3P32-SC
GOPA-4P32-LW-SC
Optanium GOPA-4P32-SC
GOPA-3P32-LW-SC
GOP-3PSP32-SC
GOP-4PSP32-LW-SC
GOP-4PSP32-SC
HOP-4PSP32-HL-G
IOP-4P32-LW-N
IOPA-4P32-LW-N
IOP-4P32-N
IOPA-4P32-N
IOP-4P32-HL-SC
Optanium
IOPA-4P32-HL-SC
IOP-4PSP32-LW-SC
IOP-4PSP32-SC
IOP-4PSP32-HL-G
GOPA-4P32-LW-SC
GOPA-4P32-SC
Optanium GOP-4PSP32-LW-SC
GOP-4PSP32-SC
HOP-4PSP32-HL-G
Refer to page 3-38 and 3-39 for dimensions
Refer to page 3-47 for wiring diagramss
Refer to pages 9-23 to 9-27 for lead lengths and shipping data
3-48
Atlas Full Line Catalog 2014-2015
58-57
65-64
0.77
10
0.49-0.21
0.87
10
0.55-0.24
95-93
1.20
10
0.79-0.35
62-61
0.85
10
0.52-0.22
70-69
0.97
10
0.59-0.26
100
1.28
10
0.85-0.37
0.70
0.88
1.18
0.81
0.98
1.32
0.88
0.81
0.95
0.77
0.88 0.74
0.93
1.24
10
10
10
10
10
10
0.48-0.21
0.58-0.26
0.76-0.33
0.50-0.22
0.59-0.26
0.84-0.37
57
70
92
59
69
101
64
65
74
58
67
63
69
100
N
60/16
N
B
B
10
10
10
10
10
N
N
77-75
0.77
10
0.65-0.28
87-85
0.87
10
0.73-0.31
124-122
1.19
10
1.05-0.45
75
90
121-120
0.71
0.88
1.21
10
10
10
0.63-0.28
0.75-0.33
1.07-0.44
78
0.78
89
75
0.88
0.71
86
0.88
122
1.17
10
65
60/16
B
G
60/16
66
B
B
177
G
60/16
B
66
177
0.25
0.36-0.26
*66
178
0.22
0.26
0.22
178
G
0.19
0.19
0.21
0.17
0.15
0.18
0.20
0.28-0.21
10
*66
G
ELECTRONIC FLUORESCENT BALLASTS
For 28W-48" T8/ES Lamps
No. of
Lamps
Input
Volts
Lamp
Starting
Method
Ballast
Family
Catalog Number
Input
Power
ANSI
(Watts)
HIGH POWER FACTOR
Ballast
Factor
Max.
THD
%
Line
Current
(Amps)
Min.
Starting
Temp.
(°F/°C)
SOUND RATED A
Dim.
Wiring
Dia.
F32T8/ES (28W - 48")
IS
120-277
1
PS
347
IS
PS
347-480
IOP-1P32-LW-N
IOPA-1P32-LW-N
IOP-1P32-N
IOPA-1P32-N
IOP-1P32-HL-SC
IOPA-1P32-HL-N
IOP-2P32-LW-N
IOPA-2P32-LW-N
IOP-1P32-N
Optanium
IOPA-2P32-N
IOP-2P32-HL-N
IOPA-2P32HL-N
IOP-1PSP32-LW-N
IOP-1PSP32-N
IOP-2PSP32-LW-N
IOP-2PSP32-N
IOP-2PSP32-HL-N
GOPA-1P32-LW-SC
GOPA-1P32-SC
GOPA-2P32-LW-SC
Optanium GOPA-2P32-SC
GOP-2PSP32-LW-SC
GOP-2PSP32-SC
HOP-2PSP32-HL-L
22
0.77
10
0.19-0.08
N
25
0.87
10
0.22-0.10
N
33
1.21
10
0.28-0.12
B
N
26
0.90
10
0.22-0.10
31
1.05
10
0.26-0.11
39
1.38
10
0.33-0.15
21
25
23
30-28
39
22
25
26
29
28
30
41
0.72
0.88
0.74
0.94
1.28
0.77
0.88
0.88
1.04
0.74
1.03
1.28
10 0.18-0.07
10 0.20-0.09
10
0.19-0.09
10
0.23-0.10
10 0.33-0.15
10
0.07
0.07
10
10
0.08
0.09
10
10
0.08
0.09
10
0.13-0.10
10
60/16
N
63
*64
20
N
77
63
60/16
B
60/16
L
*64
77
Refer to page 3-52 and 3-53 for dimensions
Refer to page 3-46 and 3-47 for wiring diagrams
Refer to pages 9-23 to 9-27 for lead lengths and shipping data
Atlas Full Line Catalog 2014-2015
3-49
ELECTRONIC FLUORESCENT BALLASTS
For 28W-48" T8/ES Lamps
No. of
Lamps
Input
Volts
Lamp
Starting
Method
Ballast
Family
Catalog Number
Input
Power
ANSI
(Watts)
HIGH POWER FACTOR
Ballast
Factor
Max.
THD
%
Line
Current
(Amps)
Min.
Starting
Temp.
(°F/°C)
SOUND RATED A
Dim.
Wiring
Dia.
N
64
N
*65
N
21
F32T8/ES (28W - 48")
IS
Optanium
120-277
2
PS
IS
347
PS
347-480
IOP-2P32-LW-N
IOPA-2P32-LW-N
IOP-2P32-N
IOPA-2P32-N
IOP-2P32-HL-N
IOPA-2P32HL-N
IOP-3P32-LW-N
IOPA-3P32LW-N
IOP-3P32-N
IOPA-3P32-N
IOP-3P32-HL-N
IOPA-3P32-HL-N
IOP-2PSP32-LW-N
IOP-2PSP32-N
IOP-2PSP32-HL-N
GOPA-2P32-LW-SC
GOPA-2P32-SC
GOPA-3P32-LW-SC
Optanium GOPA-3P32-SC
GOP-2PSP32-LW-SC
GOP-2PSP32-SC
HOP-2PSP32-HL-L
Refer to page 3-52 and 3-53 for dimensions
Refer to page 3-46 and 3-47 for wiring diagrams
Refer to pages 9-23 to 9-27 for lead lengths and shipping data
3-50
Atlas Full Line Catalog 2014-2015
42
0.77
10
0.35-0.15
48-47
0.87
10
0.41-0.18
65-64
1.19
10
0.55-0.24
47
0.86
10
0.40-0.18
55-54
1.00
10
0.46-0.20
74-73
1.31 10-15 0.62-0.27
39
51-49
66-64
42
47
46
52
45
50
0.71
0.88
1.18
0.78
0.88
0.77
1.00
0.71
0.88
69
1.16
10
10
10
10
0.33-0.14
0.42-0.18
0.55-0.24
0.12
0.14
0.13
0.16
0.13
0.15
0.20-0.15
60/16
64
60/16
B
*65
21
L
21
ELECTRONIC FLUORESCENT BALLASTS
For 28W-48" T8/ES Lamps
No. of
Lamps
Input
Volts
Lamp
Starting
Method
Ballast
Family
Catalog Number
Input
Power
ANSI
(Watts)
HIGH POWER FACTOR
Ballast
Factor
Max.
THD
%
Line
Current
(Amps)
Min.
Starting
Temp.
(°F/°C)
SOUND RATED A
Dim.
Wiring
Dia.
N
65
F32T8/ES (28W - 48")
IS
120-277
3
PS
IS
347
PS
347-480
IS
120-277
4
PS
347
347-480
IS
PS
IOP-3P32-LW-N
IOPA-3P32LW-N
IOP-3P32-N
IOPA-3P32-N
IOP-3P32-HL-N
IOPA-3P32-HL-N
IOP-4P32-LW-N
IOPA-4P32-LW-N
IOP-4P32-N
Optanium
IOPA-4P32-N
IOP-4P32-HL-SC
IOPA-4P32-HL-SC
IOP-3PSP32-LW-SC
IOP-3PSP32-SC
IOP-3PSP32-HL-SC
IOP-4PSP32-LW-SC
IOP-4PSP32-SC
IOP-4PSP32-HL-G
GOPA-3P32-LW-SC
GOPA-3P32-SC
64-63
0.77
10
0.54-0.23
72-71
0.87
10
0.61-0.26
99-97
1.20
10
0.83-0.36
69-68
0.85
10
0.58-0.25
79-78
0.97
10
0.66-0.28
1.28
10
0.90-0.39
63
75
99
64
75
110
0.70
0.88
1.18
0.80
0.98
1.31
10
10
10
10
10
10
62
70
70
79
73
65
74
111
0.77
0.88
0.81
0.97
0.88
0.74
0.93
1.24
10
IOP-4P32-LW-N
IOPA-4P32-LW-N
IOP-4P32-N
IOPA-4P32-N
Optanium
IOP-4P32-HL-SC
IOPA-4P32-HL-SC
IOP-4PSP32-LW-SC
IOP-4PSP32-SC
IOP-4PSP32-HL-G
84-82
0.77
10
0.71-0.30
N
96-94
0.87
10
0.81-0.35
N
130-129
83
97
132-130
1.19
10
0.71
0.88
1.20
10
10
10
1.10-0.47
0.69-0.30
0.81-0.35
1.11-0.48
GOPA-4P32-LW-SC
GOPA-4P32-SC
Optanium GOP-4PSP32-LW-SC
GOP-4PSP32-SC
HOP-4PSP32-HL-G
84
96
77
91
133
0.78
0.88
0.71
0.88
1.16
GOPA-4P32-LW-SC
GOPA-4P32-SC
Optanium
GOP-3PSP32-SC
GOP-4PSP32-LW-SC
GOP-4PSP32-SC
HOP-4PSP32-HL-G
106
10
N
60/16
0.24
0.28
0.23
0.27
0.39-0.28
*66
B
0.52-0.23
0.62-0.27
0.83-0.36
0.54-0.24
0.63-0.28
0.92-0.41
0.18
0.20
0.20
0.23
0.17
0.19
0.22
0.32-0.23
N
B
178
G
65
60/16
B
*66
178
G
60/16
66
B
B
G
177
66
60/16
B
G
177
Refer to page 3-52 and 3-53 for dimensions
Refer to page 3-46 and 3-47 for wiring diagrams
Refer to pages 9-23 to 9-27 for lead lengths and shipping data
Atlas Full Line Catalog 2014-2015
3-51
ELECTRONIC FLUORESCENT BALLASTS
For 32W T8 Lamps
No. of
Lamps
Input
Volts
Lamp
Starting
Method
Ballast
Family
Catalog Number
HIGH POWER FACTOR
Input
Power
ANSI
(Watts)
Ballast
Factor
Max.
THD
%
Line
Current
(Amps)
Min.
Starting
Temp.
(°F/°C)
SOUND RATED A
Dim.
Wiring
Dia.
F32T8, FBO31T8, F32T8/U6 (32W)
120
IS
AmbiStar ‡
Centium
IS
120-277
Optanium
1
PS
347
347-480
IS
PS
REB-2P32-SC
ICN-132-MC
ICN-1P32-N
ICN-2P32-N
IOP-1P32-LW-N
IOPA-1P32-LW-N
IOP-1P32-N
IOPA-1P32-N
IOP-1P32-HL-SC
IOPA-1P32-HL-N
IOP-2P32-LW-N
IOPA-2P32-LW-N
IOP-2P32-N
IOPA-2P32-N
IOP-2P32-HL-N
IOPA-2P32HL-N
IOP-1PSP32-LW-N
IOP-1PSP32-N
IOP-2PSP32-LW-N
IOP-2PSP32-N
IOP-2PSP32-HL-N
GOPA-1P32-LW-SC
GOPA-1P32-SC
GOPA-2P32-LW-SC
Optanium GOPA-2P32-SC
GOP-2PSP32-LW-SC
GOP-2PSP32-SC
HOP-2PSP32-HL-L
33
30
31
36
1.00 140
0.88 10
0.90 10
1.03 15
0.48
0.25-0.11
0.26-0.12
0.30-0.14
25
0.77
10
0.22-0.10
N
28
0.87
10
0.25-0.11
N
39-38
1.18
10
0.33-0.14
B
N
31
0.90
10
0.26-0.11
35
1.05
10
0.30-0.13
45
1.37
10
0.37-0.17
25
28
26
32
44
26
0.72
0.88
0.73
0.94
1.33
0.77
10
10
10
10
10
0.20-0.09
0.24-0.10
0.22-0.10
0.27-0.12
0.38-0.17
0.08
30
31
34
0.88
0.88
1.03
32
34
45
0.73
1.03
1.30
10
10
10
10
10
10
10
0.09
0.09
1.03
0.08
0.09
0.14-0.10
B
A2
0/-18
0/-18
N
-20/-29
N
*64
63
*64
63
*64
20
0/-18
N
77
63
-20/29
B
*64
77
0/-18
L
‡ The above AmbiStar ballasts are normal power factor and labeled ‘For Residential Use Only’
8.91"
1.05"
9.50"
1.18"
See pages 3-1 and 3-2 for specific SKU’s that meet the NEMA Premium Standard
1.0”
0"
8.9
"
8.9”
9.5
9.5”
1.7
"
1.08"
Fig. A2
Refer to page 3-53 for additional dimensions
Refer to page 3-54 and 3-55 for wiring diagrams
Refer to pages 9-23 to 9-27 for lead lengths and shipping data
3-52
Atlas Full Line Catalog 2014-2015
Fig. B
Fig. N
1.3”
ELECTRONIC FLUORESCENT BALLASTS
For 32W T8 Lamps
No. of
Lamps
Input
Volts
Lamp
Starting
Method
Ballast
Family
Catalog Number
HIGH POWER FACTOR
Input
Power
ANSI
(Watts)
Ballast
Factor
Max.
THD
%
Line
Current
(Amps)
SOUND RATED A
Min.
Starting
Temp.
(°F/°C)
Dim.
Wiring
Dia.
0/-18
B
64
50/10
A
21
F32T8, FBO31T8, F32T8/U6 (32W)
120
277
IS
RS
RS
AmbiStar ‡
PowrKut
PowrKut
Centium
IS
120-277
Optanium
2
PS
347
347-480
IS
PS
REB-2P32-SC
RK-2S32-TP
VK-2S32-TP
ICN-2M32-MC
ICN-2P32-N
ICN-3P32-N
IOP-2P32-LW-N
IOPA-2P32-LW-N
IOP-2P32-N
IOPA-2P32-N
IOP-2P32-HL-N
IOPA-2P32HL-N
IOP-3P32-LW-N
IOPA-3P32LW-N
IOP-3P32-N
IOPA-3P32-N
IOP-3P32-HL-N
IOPA-3P32-HL-N
IOP-2PSP32-LW-N
IOP-2PSP32-N
IOP-2PSP32-HL-N
56
66
66
59
59
65
0.88 120
0.86 15
0.85 15
0.88 10
0.88 10
1.01 10
0.80
0.60
0.26
0.50-0.21
0.49-0.22
0.54-0.24
48
0.77
10
0.41-0.17
55-54
0.87
10
0.47-0.20
74-72
1.18
10
0.62-0.26
55-54
0.85
10
0.46-0.20
63-62
1.00
10
0.53-0.23
80-79
1.38
10
0.67-0.29
46-45
58
78-75
0.71
0.85
1.18
10
10
10
0.40-0.17
0.48-0.21
0.66-0.28
0.78
0.88
0.86
1.00
0.76
0.88
1.20
10
0.14
0.16
0.16
0.18
0.15
0.17
0.23-0.17
GOPA-2P32-LW-SC
GOPA-2P32-SC
GOPA-3P32-LW-SC
Optanium GOPA-3P32-SC
GOP-2PSP32-LW-SC
GOP-2PSP32-SC
HOP-2PSP32-HL-L
48
54
55
63
51
57
79
10
10
10
10
10
10
0/-18
A2
N
64
*65
N
64
N
*65
N
21
-20/-29
0/-18
-20/-29
64
B
0/-18
L
*65
21
‡ The above AmbiStar ballasts are normal power factor and labeled ‘For Residential Use Only’
See pages 3-1 and 3-2 for specific SKU’s that meet the NEMA Premium Standard
4"
16.3
1.18"
1.00"
16.34"
0"
16.7
16.70"
1.18"
1.70"
Fig. G
Fig. L
Refer to page 3-54 and 3-55 for wiring diagrams
Refer to pages 9-23 to 9-27 for lead lengths and shipping data
Atlas Full Line Catalog 2014-2015
3-53
ELECTRONIC FLUORESCENT BALLASTS
For 32W T8 Lamps
No. of
Lamps
Lamp
Starting
Method
Input
Volts
Ballast
Family
HIGH POWER FACTOR
Catalog Number
Input
Power
ANSI
(Watts)
Ballast
Factor
Max.
THD
%
SOUND RATED A
Line
Current
(Amps)
Min.
Starting
Temp.
(°F/°C)
Dim.
Wiring
Dia.
0/-18
B
N
N
*66
65
*66
N
65
F32T8, FBO31T8, F32T8/U6 (32W)
IS
120
IS
120-277
3
PS
IS
347
AmbiStar ‡
REB-4P32-SC
ICN-3P32-N
Centium
ICN-4P32-N
IOP-3P32-LW-N
IOPA-3P32LW-N
IOP-3P32-N
IOPA-3P32-N
IOP-3P32-HL-N
IOPA-3P32-HL-N
IOP-4P32-LW-N
IOPA-4P32-LW-N
IOP-4P32-N
Optanium
IOPA-4P32-N
IOP-4P32-HL-SC
IOPA-4P32-HL-SC
IOP-3PSP32-LW-SC
IOP-3PSP32-SC
IOP-3PSP32-HL-SC
IOP-4PSP32-LW-SC
IOP-4PSP32-SC
IOP-4PSP32-HL-G
GOPA-3P32-LW-SC
GOPA-3P32-SC
GOPA-4P32-LW-SC
GOPA-4P32-SC
Optanium GOP-3PSP32-SC
GOP-4PSP32-LW-SC
GOP-4PSP32-SC
HOP-4PSP32-HL-G
PS
347-480
‡ The above AmbiStar ballasts are normal power factor and labeled ‘For Residential Use Only’
80
85
93
0.84 125
0.88 10
1.00 10
1.36
0.71-0.31
0.78-0.33
73-71
0.77
10
0.62-0.27
82-80
0.87
10
0.70-0.30
110-107
1.18
10
0.91-0.39
80-79
0.84
10
0.67-0.29
90-88
0.97
10
0.75-0.32
N
122-120
1.29
10
1.02-0.44
B
74
85
113-110 77
90
126-122
0.71
0.88
1.18
0.71
0.88
1.29
10
10
10
10
10
10
74
84
77
89
84
0.77
0.88
0.81
0.96
0.87
10
10
10
10
10
0.63-0.27
0.71-0.37
0.94-0.40
0.65-0.28
0.76-0.33
1.05-0.45
0.21
0.24
0.23
0.26
0.25
80
93
124
0.74
0.93
1.17
10
10
10
0.23
0.23
0.36-0.26
BLUE*
BLUE*
LINE
-20/-29
0/-18
N
*66
B
178
G
65
-20/-29
*66
B
0/-18
178
G
See pages 3-1 and 3-2 for specific SKU’s that meet the
NEMA Premium Standard
LINE
LINE
BLK/WHT
WHITE
BLUE
BLUE
BALLAST
BLACK
WHITE
YELLOW
YELLOW
BALLAST
BLUE/WHITE
BLACK
RED
RED
WHITE
BALLAST
LAMP
LAMP
LAMP
Diag. 20
DIAG. 20
Refer to page 3-52 and 3-53 for dimensions
Refer to page 3-55 for additional wiring diagrams
Refer to pages 9-23 to 9-27 for lead lengths and shipping data
3-54
Atlas Full Line Catalog 2014-2015
*INSULATE BLUE LEADS INDIVIDUALLY FOR
Diag. 77
Diag . 77
RED
YELLOW
RED
RED
LAMP
BLUE
600 V
LAMP
Diag. 178
ELECTRONIC FLUORESCENT BALLASTS
For 32W T8 Lamps
No. of
Lamps
Lamp
Starting
Method
Input
Volts
Ballast
Family
Catalog Number
HIGH POWER FACTOR
Input
Power
ANSI
(Watts)
Max.
THD
%
Ballast
Factor
Line
Current
(Amps)
Min.
Starting
Temp.
(°F/°C)
SOUND RATED A
Dim.
Wiring
Dia.
F32T8, FBO31T8, F32T8/U6 (32W)
120
IS
AmbiStar ‡
Centium
IS
120-277
Optanium
4
PS
IS
347
347-480
PS
REB-4P32-SC
ICN-4P32-N
IOP-4P32-LW-N
IOPA-4P32-LW-N
IOP-4P32-N
IOPA-4P32-N
IOP-4P32-HL-SC
IOPA-4P32-HL-SC
IOP-4PSP32-LW-SC
IOP-4PSP32-SC
IOP-4PSP32-HL-G
GOPA-4P32-LW-SC
GOPA-4P32-SC
Optanium GOP-4PSP32-LW-SC
GOP-4PSP32-SC
HOP-4PSP32-HL-G
‡ The above AmbiStar ballasts are normal power factor and labeled ‘For Residential Use Only’
103
112
0.81
0.88
125
10
1.57
0/-18
0.94-0.41
96-94 0.77
109-1060.87
10
0.81-0.35
10
0.92-0.39
150-146
10
1.26-0.54
10
10
10
0.78-0.33
0.93-0.40
1.28-0.55
0.27
0.31
0.27
0.33
0.44-0.32
1.18
94
0.71 110 0.88
153-149 1.18
92
107
92
114
152
0.78
0.88
0.70
0.88
1.17
10
10
10
10
10
66
B
N
N
-20/-29
66
N
B
0/-18
B
177
G
-20/-29
0/-18
66
B
177
G
See pages 3-1 and 3-2 for specific SKU’s that meet the NEMA Premium Standard
BLACK
LINE
WHITE
YELLOW
YELLOW
BALLAST
BLUE
BLUE
WHITE
BLACK
RED
RED
WHITE
BLACK
BLUE
BLUE
BALLAST
RED
BALLAST
BLUE
RED
LAMP
LAMP
LINE
LAMP
Diag. 21
BLACK
BLUE
BALLAST
BLACK
BLUE
YELLOW
YELLOW
BLUE
RED
*FOR SINGLE LAMP OPERATION,
INSULATE UNUSED BLUE LEAD FOR 600V
Diag. 63
WHITE
WHITE
LAMP
LAMP
LINE
BALLAST
Diag. 64
BLUE/WHITE
BLUE
BLUE
RED
RED
BLACK
LINE
WHITE
BROWN
BALLAST
BLUE
RED
LAMP
YELLOW
LAMP
LAMP
LINE
LAMP
LINE
LAMP
LAMP
*FOR TWO LAMP OPERATION,
INSULATE UNUSED BLUE LEADS INDIVIDUALLY FOR 600V
Diag. 65
LAMP
LAMP
LAMP
LAMP
LAMP
*FOR THREE LAMP OPERATION,
INSULATE UNUSED BLUE LEADS INDIVIDUALLY FOR 600V
Diag. 66
Diag. 177
Refer to page 3-52 and 3-53 for dimensions
Refer to page 3-54 for additional wiring diagrams
Refer to pages 9-23 to 9-27 for lead lengths and shipping data
Atlas Full Line Catalog 2014-2015
3-55
ELECTRONIC FLUORESCENT BALLASTS
For 40W T8 Lamps
No. of
Lamps
Input
Volts
Lamp
Starting
Method
Ballast
Family
HIGH POWER FACTOR
Input
Power
ANSI
(Watts)
Catalog Number
Ballast
Factor
Max.
THD
%
Line
Current
(Amps)
Min.
Starting
Temp.
(°F/°C)
SOUND RATED A
Dim.
Wiring
Dia.
F40T8 (40W)
Centium
120-277
1
347
IS
IS
Optanium
Optanium
Centium
2
120-277
347
IS
IS
Optanium
Optanium
ICN-2P32-N
IOP-2P32-LW-N
IOPA-2P32-LW-N
IOP-2P32-N
IOPA-2P32-N
IOP-2P32-HL-N
IOPA-2P32HL-N
GOPA-2P32-LW-SC
GOPA-2P32-SC
ICN-3P32-N
IOP-3P32-LW-N
IOPA-3P32LW-N
IOP-3P32-N
IOPA-3P32-N
IOP-3P32-HL-N
IOPA-3P32-HL-N
GOPA-3P32-LW-SC
GOPA-3P32-SC
Refer to page 3-57 for wiring diagrams and dimensions
Refer to pages 9-23 to 9-27 for lead lengths and shipping data
3-56
Atlas Full Line Catalog 2014-2015
42
1.00
10
0.35-0.15
35
41
0.87
10
0.29-0.13
1.01
10
0.35-0.15
55-54
1.35
10
0.46-0.20
0.86
1.02
10
77
1.00
10
0.11
0.12
0.65-0.28
67-66
0.85
10
0.58-0.25
74-72
1.01
10
0.64-0.27
102-100
1.30
10
0.85-0.37
65
75
0.85
1.00
10
37
42
32/0
0.19
0.22
N
*64
B
32/0
N
B
*65
ELECTRONIC FLUORESCENT BALLASTS
For 40W T8 Lamps
No. of
Lamps
Lamp
Starting
Method
Input
Volts
Ballast
Family
HIGH POWER FACTOR
Catalog Number
Input
Power
ANSI
(Watts)
Max.
THD
%
Ballast
Factor
Min.
Starting
Temp.
(°F/°C)
Line
Current
(Amps)
SOUND RATED A
Dim.
Wiring
Dia.
F40T8 (40W)
ICN-4P32-N
IOP-4P32-LW-N
IOPA-4P32-LW-N
IOP-4P32-N
Optanium
IOPA-4P32-N
IOP-4P32-HL-SC
IOPA-4P32-HL-SC
GOPA-4P32-LW-SC
Optanium
GOPA-4P32-SC
Centium
120-277
3
IS
1.18"
347
IS
112
0.97
10
0.94-0.40
98-96
110-107
0.84
10
0.82-0.35
0.93
10
0.92-0.38
150-147
1.25
10
1.27-0.54
97
113
0.84
0.93
10
0"
8.9
32/0
*66
B
0.28
0.28
B
4"
16.3
1.18"
"
9.5
N
0"
16.7
1.70"
1.7
"
Fig. G
Fig. B
WHITE
BLACK
1.0”
8.9”
LAMP
LINE
Fig. N
Diag. 63
WHITE
WHITE
WHITE
BLACK
BALLAST
BLUE
1.3”
9.5”
BLACK
BALLAST
RED
BLUE
BLUE
BALLAST
BLACK
BLUE
YELLOW
YELLOW
BLUE
RED
RED
BLUE
BALLAST
BLUE
BLUE
RED
RED
LAMP
LAMP
LAMP
LAMP
LINE
LAMP
LINE
LAMP
*FOR SINGLE LAMP OPERATION,
INSULATE UNUSED BLUE LEAD FOR 600V
LAMP
*FOR TWO LAMP OPERATION,
INSULATE UNUSED BLUE LEADS INDIVIDUALLY FOR 600V
Diag. 64
Diag. 65
LINE
LAMP
LAMP
*FOR THREE LAMP OPERATION,
INSULATE UNUSED BLUE LEADS INDIVIDUALLY FOR 600V
Diag. 66
Refer to pages 9-23 to 9-27 for lead lengths and shipping data
Atlas Full Line Catalog 2014-2015
3-57
ELECTRONIC FLUORESCENT BALLASTS
For 46-59W T8 Slimline Lamps
No. of
Lamps
Input
Volts
HIGH POWER FACTOR
Ballast
Family
Catalog Number
Input
Power
ANSI
(Watts)
Ballast
Factor
Max.
THD
%
Line
Current
(Amps)
IS
Optanium
Optanium
IOP-2P59-SC
IOP-2P59-SC
54
88
1.09
0.92
10
10
IS
IS
Optanium
Optanium
IOP-2P59-SC
IOP-2P59-SC
64
103
1.05
0.87
IOP-2P59-SC
IOP-2P59-SC
67
1.05
Lamp
Starting
Method
SOUND RATED A
Min.
Starting
Temp.
(°F/°C)
Dim.
Wiring
Dia.
0.46-0.20
0.74-0.32
32/0
B
*64A
32/0
B
64A
10
10
0.54-0.24
0.86-0.37
60/16
60/16
B
B
*64A
64A
10
0.56-0.25
32/0
B
*64A
0.91-0.39
32/0
B
64A
F72T8 (46W)
1
2
120-277
120-277
IS
F96T8/ES (57W)
1
2
120-277
120-277
F96T8 (59W)
1
120-277
IS
Optanium
2
120-277
IS
Optanium
107
0.87
10
WHITE
BLACK
BALLAST
1.18"
RED
0"
8.9
"
9.5
LAMP
1.7
"
*FOR SINGLE LAMP OPERATION,
INSULATE UNUSED BLUE LEAD FOR 1000V
Fig. B
Refer to pages 9-23 to 9-27 for lead lengths and shipping data
3-58
LAMP
LINE
Atlas Full Line Catalog 2014-2015
Diag. 64A
BLUE
BLUE
ELECTRONIC FLUORESCENT BALLASTS
For 44-86W T8HO Lamps
No. of
Lamps
Input
Volts
Ballast
Family
Catalog Number
Input
Power
ANSI
(Watts)
PS
Centium
ICN-2S86
ICN-2S86
59
98
PS
Centium
ICN-2S86
ICN-2S86
70
118
PS
Centium
ICN-2S86
ICN-2S86
PS
Centium
ICN-2S86
ICN-2S86
Lamp
Starting
Method
HIGH POWER FACTOR
SOUND RATED A
Max.
THD
%
Line
Current
(Amps)
Min.
Starting
Temp.
(°F/°C)
Dim.
Wiring
Dia.
1.02
0.95
20
10
0.50-0.23
0.84-0.36
-20/-29
C
39A
21
1.00
0.92
20
10
0.58-0.26
1.04-0.45
-20/-29
C
39A
21
81
140
1.00
0.94
15
10
0.68-0.30
1.21-0.54
-20/-29
C
39A
21
100
185
1.00
0.95
10
10
0.84-0.36
1.57-0.68
-20/-29
C
39A
21
Ballast
Factor
F48T8/HO (44W)
1
2
120-277
120-277
F60T8/HO (55W)
1
2
120-277
120-277
F72T8/HO (65W)
1
2
120-277
120-277
F96T8/HO (86W)
1
2
120-277
120-277
1 25 /32 "
11 9 /64 "
2 7/ 8 "
3
11 /4 "
Fig C
LINE
BLACK
WHITE
YELLOW
YELLOW
BALLAST
BLUE
BLUE
LAMP
RED
RED
LAMP
LAMP
Diag. 21
LINE
BLACK
WHITE
YELLOW
YELLOW
BALLAST
BLUE
BLUE
RED
RED
*FOR SINGLE LAMP OPERATION,
INSULATE YELLOW LEADS INDIVIDUALLY FOR 1000V
Diag. 39A
DIAG. 39A
Refer to pages 9-23 to 9-27 for lead lengths and shipping data
Atlas Full Line Catalog 2014-2015
3-59
ELECTRONIC FLUORESCENT BALLASTS
For 30-40W T12 Lamps
No. of
Lamps
Input
Volts
Lamp
Starting
Method
HIGH POWER FACTOR
SOUND RATED A
Ballast
Family
Catalog Number
Input
Power
ANSI
(Watts)
Ballast
Factor
Max.
THD
%
Line
Current
(Amps)
Min.
Starting
Temp.
(°F/°C)
Dim.
Wiring
Dia.
F30T12 (30W - 36")
1
1
120
120-277
RS
RS
AmbiStar
Centium
RELB-2S40-N
ICN-2S40-N
0.95
0.95
20
10
N
39
2
2
120
120-277
RS
RS
RELB-2S40-N
ICN-2S40-N
0.25
0.25-0.11
50/10
AmbiStar
Centium
30
30
58
58
0.93
0.93
20
10
0.48
0.48-0.20
50/10
N
21
31
31
0.88
0.88
39
0.85
0.85
0.26
0.26-0.12
0.53
0.53-0.23
N
62
62
20
10
20
10
50/10
Centium
RELB-2S40-N
ICN-2S40-N
RELB-2S40-N
ICN-2S40-N
50/10
N
21
35
35
72
72
0.88
0.88
0.85
0.85
20
10
20
10
0.30
0.30-0.13
50/10
N
39
0.62
0.62-0.26
50/10
N
21
F34T12, F34T12/U (34W)
1
1
2
2
120
120-277
120
120-277
AmbiStar
RS
Centium
AmbiStar
RS
F40T12, F40T12/U (40W)
1
1
120
120-277
RS
AmbiStar
Centium
RELB-2S40-N
ICN-2S40-N
2
2
120
120-277
RS
AmbiStar
Centium
RELB-2S40-N
ICN-2S40-N
* Normal Power Factor
LINE
BLACK
WHITE
BALLAST
YELLOW
YELLOW
LAMP
BLUE
BLUE
RED
RED
LINE
LAMP
Diag. 39
Diag. 21
1.0”
9.5”
1.3”
Fig. N
Refer to pages 9-23 to 9-27 for lead lengths and shipping data
3-60
Atlas Full Line Catalog 2014-2015
BALLAST
BLUE
BLUE
RED
RED
*FOR SINGLE LAMP OPERATION,
INSULATE YELLOW LEADS INDIVIDUALLY FOR 600V
LAMP
8.9”
YEL
YEL
WHITE
BLACK
ELECTRONIC FLUORESCENT BALLASTS
For 55-75W T12 Slimline Lamps
No. of
Lamps
Input
Volts
Lamp
Starting
Method
Ballast
Family
IS
Centium
ICN-2P60-SC
IS
Centium
ICN-2P60-SC
IS
Centium
ICN-2P60-SC
Catalog Number
HIGH POWER FACTOR
SOUND RATED A
Input
Power
ANSI
(Watts)
Ballast
Factor
Max.
THD
%
Line
Current
(Amps)
Min.
Starting
Temp.
(°F/°C)
Dim.
68-67
108-107
1.05
0.92
10
10
0.70-0.31
0.91-0.40
0/-18
B
60/16
B
0/-18
B
Wiring
Dia.
F72T12 (55W)
1
2
120-277
120-277
*64A
64A
F96T12/ES (60W)
1
120-277
2
120-277
70-68
1.04
10
0.53-0.24
105-103
0.89
10
0.88-0.38
84-82
137-135
1.04
0.90
10
10
0.55-0.25
1.17-0.50
*64A
64A
F96T12 (75W)
1
120-277
2
120-277
*64A
64A
WHITE
BLACK
BLUE
BLUE
BALLAST
RED
LAMP
LINE
LAMP
*FOR SINGLE LAMP OPERATION,
INSULATE UNUSED BLUE LEAD FOR 1000V
1.18"
Diag. 64A
0"
8.9
"
9.5
1.7
"
Fig. B
Refer to pages 9-23 to 9-27 for lead lengths and shipping data
Atlas Full Line Catalog 2014-2015
3-61
ELECTRONIC FLUORESCENT BALLASTS
For 95 - 110W T12/HO Lamps
No. of
Lamps
Input
Volts
HIGH POWER FACTOR
SOUND RATED A
Catalog Number
Input
Power
ANSI
(Watts)
Ballast
Factor
Max.
THD
%
Line
Current
(Amps)
Min.
Starting
Temp.
(°F/°C)
Dim.
Wiring
Dia.
Centium
ICN-2S110-SC
93-92
0.90
10
0.82-0.35
-20/-29
B
21
Centium
ICN-2S110-SC
116-114
1.00
10
0.98-0.42
-20/-29
B
21
Centium
ICN-2S110-SC
140-138
0.90
10
1.19-0.51
-20/-29
B
21
Centium
ICN-2S110-SC
60/16
B
Centium
ICN-2S110-SC
-20/-29
B
Lamp
Starting
Method
Ballast
Family
F48T12/HO (48W)
2
120-277
RS
F60T12/HO (60W)
2
120-277
RS
F72T12/HO (72W)
2
120-277
RS
F96T12/HO (95W)
1
120-277
2
120-277
RS
78-77
0.91
10
0.68 - 0.29
154-151
0.89
10
1.30 - 0.56
100-92
0.91
10
194-190
0.89
10
39A
21
F96T12/HO (110W)
1
120-277
2
120-277
RS
BLACK
LINE
WHITE
YELLOW
YELLOW
BLUE
BLUE
BALLAST
0.88 - 0.35
1.64 - 0.70
LAMP
RED
RED
LINE
LAMP
BLACK
WHITE
YELLOW
YELLOW
BALLAST
LAMP
*FOR SINGLE LAMP OPERATION,
INSULATE YELLOW LEADS INDIVIDUALLY FOR 1000V
Diag. 21
Diag. 39A
1.18"
DIAG. 39A
0"
8.9
"
9.5
1.7
"
Fig. B
Refer to pages 9-23 to 9-27 for lead lengths and shipping data
3-62
BLUE
BLUE
RED
RED
Atlas Full Line Catalog 2014-2015
39A
21
ELECTRONIC FLUORESCENT BALLASTS
For 18 - 145W
UV Disinfection Lamps
No. of
Lamps
Input
Volts
Lamp
Starting
Method
Ballast
Family
Catalog Number
HIGH POWER FACTOR
Input
Lamp
Power
Current
ANSI
(mAmps)
(Watts)
SOUND RATED A
Max.
THD
%
Line
Current
(Amps)
Min.
Starting
Temp.
(°F/°C)
Dim.
Wiring
Dia.
PL-L18W/TUV (18W)
1
120 - 277
PS
PureVOLT
IUV-2S18-H1-LD
30
290
10
0.26 - 0.11
0/-18
Size 1
160
2
120 - 277
PS
PureVOLT
IUV-2S18-H1-LD
55
280
10
0.47 - 0.20
0/-18
Size 1
159
PL-L36W/TUV (36W)
1
120 - 277
PS
PureVOLT
IUV-2S36-M2-LD
51
330
10
0.44 - 0.19
0/-18
Size 2
160
2
120 - 277
PS
PureVOLT
IUV-2S36-M2-LD
90
285
10
0.78 - 0.33
0/-18
Size 2
159
PL-L35WHO/TUV (35W)
1
120 - 277
PS
PureVOLT
IUV-2S60-M4-LD
40
850
10
0.35 - 0.15
0/-18
Size 4
160
2
120 - 277
PS
PureVOLT
IUV-2S60-M4-LD
78
850
10
0.68 - 0.29
0/-18
Size 4
159
PL-L60WHO/TUV (60W)
1
120 - 277
PS
PureVOLT
IUV-2S60-M4-LD
70
850
10
0.60 - 0.26
0/-18
Size 4
160
2
120 - 277
PS
PureVOLT
IUV-2S60-M4-LD
138
850
10
1.20 - 0.52
0/-18
Size 4
159
PureVOLT
IUV-2S60-M4-LD
100
800
10
0.87 - 0.37
0/-18
Size 4
160
PL-L95WHO/TUV (95W)
1
120 - 277
PS
TUV 36T5/HO (75W)
1
120 - 277
PS
PureVOLT
IUV-2S60-M4-LD
80
800
10
0.69 - 0.30
0/-18
Size 4
160
2
120 - 277
PS
PureVOLT
IUV-2S60-M4-LD
155
800
10
1.30 - 0.56
0/-18
Size 4
159
PureVOLT
IUV-2S60-M4-LD
155
800
10
1.30 - 0.56
0/-18
Size 4
160
TUV 64T5/HO (145W)
1
120 - 277
PS
2.40"
2.40"
3.00"
0.98"
0.98"
1.29"
7.50"
7.00"
1.29"
4.20"
4.20"
4.60"
4.60"
-LD
Size 1
-LD
Size 2
4.20"
4.60"
-LD
3.00"
Size 4
Refer to pages 3-64 for wiring diagrams
Atlas Full Line Catalog 2014-2015
3-63
ELECTRONIC FLUORESCENT BALLASTS
For 58 - 70W
Refrigeration Lamps
No. of
Lamps
Lamp
Starting
Method
Input
Volts
Ballast
Family
HIGH POWER FACTOR
Input
Power
ANSI
(Watts)
Ballast
Factor
Max.
THD
%
60
59
60
59
1.08
1.04
1.08
1.04
15
10
15
10
0.51 0.490.51 0.49 -
112-108
1.00
10
0.94 - 0.40
ICN-2S54-90C-N
110-109
112-108
1.00
1.00
10
10
0.92 - 0.39
-20/-29
0.94 - 0.40
ICN-2S54-90C-T
Catalog Number
Min.
Starting
Temp.
(°F/°C)
Line
Current
(Amps)
SOUND RATED A
Dim.
Wiring
Dia.
N
T
N
T
73
F58T8 (58W)
1
120 - 277
2
PS
120 - 277
PS
Centium
Centium
ICN-2S54-N
ICN-2S54-T
ICN-2S54-90C-N
ICN-2S54-90C-T
ICN-2S54-N
ICN-2S54-T
0.23
0.22
-20/-29
0.23
0.22
N
T
74
N
110-109
1.00
10
0.92 - 0.39
T
3
120 - 277
PS
Centium
ICN-4S54-90C-2LS-G
171
1.00
10
1.43 - 0.62 -20/-18
G
75A
4
120 - 277
PS
Centium
ICN-4S54-90C-2LS-G
225
1.00
10
1.88 - 0.81 -20/-18
G
75
PS
Centium
ICN-1S80-T
72-71
1.12
10
0.60-0.26
T
73
F70T8 (70W)
120 - 277
1
0/-18
1.18"
1.06"
1.0”
4"
16.3
1.18"
8.9”
0"
16.7
1.3”
9.5”
1.70"
Fig. G
Fig. N
14.17"
Fig. T
Includes connectors with no leads
WIRING: 1-LAMP
WIRING: 2-LAMP
BLUE
BLACK
LINE
GREEN
BLACK
BALLAST
WHITE
WHITE
BALLAST
RED
RED
YELLOW
YELLOW
LINE
BLUE
BLUE
WHITE
Diag. 159
Green Terminal must be Grounded
LAMP
BALLAST
WHITE
RED
NEUTRAL
OR
(ANY HOT)
S
Diag. 159
Green Terminal must be Grounded
ORANGE
BLACK
LAMP
RED
3-LAMP
BLUE
BLACK
GREEN
YELLOW
GREEN
Diag. 73
For 1 lamp
operation,do
do not
yellow
leads leads
For 1 lamp
operation,
notuseuse
yellow
ON
OFF
LINE
BLACK
WHITE
WHITE
GREEN
GREEN
BALLAST
GREEN
BLACK
WHITE
BALLAST
RED
BALLAST
LAMP
RED
3 LAMPS ON
2 LAMPS ON
Diag. 75A
3-64
ORANGE
BLACK
GREEN
WHITE
NEUTRAL OR
(ANY HOT)
RED
BALLAST
RED
BLUE
S
ON
OFF
GREY/RED
BALLAST
S
LAMPS
4 LAMPS ON
ON
BLUE
2 LAMPS
Diag. 75
Diag. 74
LAMP
LAMP
LAMP
LAMP
LAMP
Diag. 160
Atlas
Line Catalog
GreenFull
Terminal
must be 2014-2015
Grounded
LAMP
S
BLACK
BLUE
Diag. 160
Green Terminal
must be Grounded
LAMP
BROWN
YELLOW
LAMPS
RED
RED
YELLOW
YELLOW
BLUE
BLUE
WHITE
YELLOW
RED
BLUE
Diag. 160
Green Terminal must be Grounded
BLUE
BLACK
BALLAST
GREY/RED
4-LAMP
WIRING: 1-LAMP
13.78"
BROWN
YELLOW
LAMP
LAMP
LAMP
ELECTRONIC FLUORESCENT BALLASTS
Footnotes:
1 Based on input watts of IOP-2PSP32N (58W) and
IOP-2P32-N (54W)
2 Based on engineering data testing and probability analysis.
The criteria are 50,000 hours of operation with 10%
surviving when operated at the ballast maximum Tc point,
typically 70° C.
Atlas Full Line Catalog 2014-2015
3-65

Similar documents

×

Report this document