ExtremeXOS Feature License Requirements 120996-00 Published October 2014

Document technical information

Format pdf
Size 748.0 kB
First found Jun 9, 2017

Document content analysis

Language
English
Type
not defined
Concepts
no text concepts found

Persons

Organizations

Places

Transcript

ExtremeXOS Feature License
Requirements
120996-00
Published October 2014
Copyright © 2011–2014 All rights reserved.
Legal Notice
Extreme Networks, Inc., on behalf of or through its wholly-owned subsidiary, Enterasys Networks,
Inc., reserves the right to make changes in specifications and other information contained in this
document and its website without prior notice. The reader should in all cases consult
representatives of Extreme Networks to determine whether any such changes have been made.
The hardware, firmware, software or any specifications described or referred to in this document
are subject to change without notice.
Trademarks
Extreme Networks and the Extreme Networks logo are trademarks or registered trademarks of
Extreme Networks, Inc. in the United States and/or other countries.
All other names (including any product names) mentioned in this document are the property of
their respective owners and may be trademarks or registered trademarks of their respective
companies/owners.
For additional information on Extreme Networks trademarks, please see:
www.extremenetworks.com/company/legal/trademarks/
Support
For product support, including documentation, visit: www.extremenetworks.com/
documentation/
For information, contact:
Extreme Networks, Inc.
145 Rio Robles
San Jose, California 95134
USA
Table of Contents
Preface.........................................................................................................................................4
Conventions.............................................................................................................................................................................4
Related Publications............................................................................................................................................................ 5
Providing Feedback to Us................................................................................................................................................ 6
Chapter 1: Feature License Requirements..............................................................................7
Overview................................................................................................................................................................................... 7
Switch License Features....................................................................................................................................................8
Feature Pack Features...................................................................................................................................................... 17
ExtremeXOS Feature License Requirements
3
Preface
Conventions
This section discusses the conventions used in this guide.
Text Conventions
The following tables list text conventions that are used throughout this guide.
Table 1: Notice Icons
Icon
Notice Type
Alerts you to...
Note
Important features or instructions.
Caution
Risk of personal injury, system damage, or loss of data.
Warning
Risk of severe personal injury.
New
This command or section is new for this release.
Table 2: Text Conventions
Convention
Screen displays
Description
This typeface indicates command syntax, or represents information as it appears on
the screen.
The words enter and
type
When you see the word “enter” in this guide, you must type something, and then press
the Return or Enter key. Do not press the Return or Enter key when an instruction
simply says “type.”
[Key] names
Key names are written with brackets, such as [Return] or [Esc]. If you must press two
or more keys simultaneously, the key names are linked with a plus sign (+). Example:
Press [Ctrl]+[Alt]+[Del]
Words in italicized type
Italics emphasize a point or denote new terms at the place where they are defined in
the text. Italics are also used when referring to publication titles.
ExtremeXOS Feature License Requirements
4
Preface
Platform-Dependent Conventions
Unless otherwise noted, all information applies to all platforms supported by ExtremeXOS software,
which are the following:
•
•
•
•
•
BlackDiamond® X8 series switch
BlackDiamond 8800 series switches
Cell Site Routers (E4G-200 and E4G-400)
Summit® family switches
SummitStack™
When a feature or feature implementation applies to specific platforms, the specific platform is noted in
the heading for the section describing that implementation in the ExtremeXOS command
documentation. In many cases, although the command is available on all platforms, each platform uses
specific keywords. These keywords specific to each platform are shown in the Syntax Description and
discussed in the Usage Guidelines.
Terminology
When features, functionality, or operation is specific to a switch family, the family name is used.
Explanations about features and operations that are the same across all product families simply refer to
the product as the "switch."
Related Publications
Documentation for Extreme Networks products is available at: www.extremenetworks.com. The
following is a list of related publications currently available:
•
•
•
•
•
•
ExtremeXOS User Guide
ExtremeXOS Hardware and Software Compatibility Matrix
ExtremeXOS Legacy CLI Quick Reference Guide
ExtremeXOS ScreenPlay User Guide
ExtremeXOS Release Notes
Using AVB with Extreme Switches
•
•
•
•
BlackDiamond 8800 Series Switches Hardware Installation Guide
BlackDiamond X8 Switch Hardware Installation Guide
Extreme Networks Pluggable Interface Installation Guide
Summit Family Switches Hardware Installation Guide
•
•
Ridgeline Installation and Upgrade Guide
Ridgeline Reference Guide
•
•
SDN OpenFlow Implementation Guide
SDN OpenStack Install Guide
Some ExtremeXOS software files have been licensed under certain open source licenses. Information is
available at: www.extremenetworks.com/services/osl-exos.aspx
ExtremeXOS Feature License Requirements
5
Preface
Providing Feedback to Us
We are always striving to improve our documentation and help you work better, so we want to hear
from you! We welcome all feedback but especially want to know about:
• Content errors or confusing or conflicting information.
• Ideas for improvements to our documentation so you can find the information you need faster.
• Broken links or usability issues.
If you would like to provide feedback to the Extreme Networks Information Development team about
this document, please contact us using our short online feedback form. You can also email us directly at
[email protected]
ExtremeXOS Feature License Requirements
6
1 Feature License Requirements
Overview
Switch License Features
Feature Pack Features
This document introduces the licenses and feature packs available for the ExtremeXOS software and
lists the features they support.
Overview
The ExtremeXOS software supports the following license options:
•
•
•
•
•
L2 Edge
Edge
Advanced Edge
Core
Feature Packs
The L2 Edge license provides a basic feature set and the Core license includes the highest level of
functionality. Each license level builds on the features of the license level below it. For example, the
Advanced Edge license includes all of the features in the L2 Edge and Edge licenses, plus the features in
the Advance Edge license. The Core license includes all of the features in the Advanced Edge license,
plus the features in the Core license. See the following table for a list of software licenses available for
each platform that supports ExtremeXOS software.
Note
The Advanced Core license is no longer offered.
Table 3: Standard and Upgrade Licenses for ExtremeXOS Switches
Switch Platform
L2 Edge License
Edge License
Advanced Edge
License
Core License
Summit X430
Standard
—
—
—
Summit X440 series
—
Standard
Upgrade
—
Summit X440-L2
Standard
—
—
—
Summit X460 series
—
Standard
Upgrade
Upgrade
Summit X460-G2 series
—
Standard
Upgrade
Upgrade
Summit X480 series
—
—
Standard
Upgrade
Summit X670 series
—
—
Standard
Upgrade
Summit X670-G2 series
—
—
Standard
Upgrade
Summit X770 series
—
—
Standard
Upgrade
ExtremeXOS Feature License Requirements
7
Feature License Requirements
Table 3: Standard and Upgrade Licenses for ExtremeXOS Switches (continued)
Switch Platform
L2 Edge License
Edge License
Advanced Edge
License
Core License
E4G-200
—
Standard
Upgrade
Upgrade
E4G-400
—
—
Standard
Upgrade
BlackDiamond X8 series
—
—
Standard
Upgrade
BlackDiamond 8800 series
—
—
Standard
Upgrade
Software keys are stored in the EEPROM of the chassis and, once enabled, persist through reboots,
software upgrades, power outages, and reconfigurations. Because the license is stored in the EEPROM
of the chassis (and not on the MSM/MM card), the license persists even if you change MSM/MM cards.
The keys are unique to the chassis or switch and are not transferable.
If you attempt to execute a command and you either do not have the required license or have reached
the limits defined by the current license level, the system returns one of the following messages:
Error: This command cannot be executed at the current license level.
Error: You have reached the maximum limit for this feature at this license level.
You can obtain a trial license, which allows you to use the license for 30, 60, or 90 days, and you can
downgrade trial licenses to a lower software license level during the trial period. Most feature packs are
enabled. After you enable the trial license, the switch behaves as if all software license levels and
feature packs are enabled. The trial license key contains all the necessary information on the license
level and the number of days. Once you have a trial license for any one of these periods, you cannot
extend the time of the trial. Trial licenses can be applied only once for each software version; if you
upgrade to a different software version, you can reapply your trial license.
Note
The Network Timing feature pack is not included in the trial license.
Displaying the Installed Licenses and Feature Packs
You can display the types of licenses and feature packs installed on your Extreme Networks switch by
using the show licenses command.
Switch License Features
L2 Edge License Features
The L2 Edge license provides all Layer 2 switch applicable capabilities of the ExtremeXOS software that
are not licensed by the higher license levels (the Edge, Advanced Edge, and Core licenses) and the
Feature Packs.
ExtremeXOS Feature License Requirements
8
Feature License Requirements
The following table lists most of the L2 Edge license features.
Note
Listed platforms that do not support this license support these features with a higher license
level.
Table 4: ExtremeXOS L2 Edge License Features
ExtremeXOS Software Feature
Supported Platforms
EDP
All platforms
Extreme Network Virtualization (XNV)
All platforms except Summit X430.
Identity Management
Summit family switches
SummitStack
BlackDiamond 8000 series
LLDP 802.1ab
Summit family switches
SummitStack
BlackDiamond 8000 series
LLDP-MED extensions
Summit family switches
SummitStack
BlackDiamond 8000 series
VLANs—Port based and tagged trunks
All platforms
VLANs—MAC based
All platforms
VLANs—Protocol based
Summit family switches
BlackDiamond 8000 series
VLANs—Private VLANs
All platforms
VLANs—VLAN translation
All platforms
VMANs—Q-in-Q tunneling (IEEE 802.1ad VMAN tunneling
standard)
All platforms
VMANs—Egress queue selection based on 802.1p value in S-tag
All platforms
VMANs—Egress queue selection based on 802.1p value in C-tag
BlackDiamond X8, Summit family switches
SummitStack
BlackDiamond 8000 series
VMANs—Secondary ethertype support
All platforms
VMAN Customer Edge Port (CEP—also known as Selective Q-inQ)
BlackDiamond X8
BlackDiamond 8000 series
Summit family switches
VMAN Customer Edge Port CVID Egress Filtering / CVID
Translation
Summit X440, X460, X460-G2, X480, X670,
X670-G2, and X770 series switches
BlackDiamond X8
BlackDiamond 8900 c-, xl-, and xm-series
modules
L2 Ping / Traceroute 802.1ag
All platforms
Jumbo frames (including all related items, MTU disc. IP frag.)
All platforms
QoS—egress port rate shaping/limiting
All platforms
QoS—egress queue rate shaping/limiting
All platforms
ExtremeXOS Feature License Requirements
9
Feature License Requirements
Table 4: ExtremeXOS L2 Edge License Features (continued)
ExtremeXOS Software Feature
Supported Platforms
Link Aggregation Groups (LAG), static 802.3ad
All platforms
LAG dynamic (802.3ad LACP) edge, to servers only!
All platforms
LAG (802.3ad LACP) core, between switches
All platforms
Port loopback detection and shutdown (ELRP CLI)
All platforms
Software redundant port
All platforms
STP 802.1D
All platforms
STP EMISTP + PVST+ Compatibility mode (1 domain per port)
All platforms
STP EMISTP, PVST+ Full (multi-domain support)
All platforms
STP 802.1s
All platforms
STP 802.1w
All platforms
ERPS (4 max rings with matching ring ports)
BlackDiamond 8000 series
Summit family switches
ESRP aware
All platforms
EAPS edge (4 max domains with matching ring ports)
All platforms
Link Fault Signaling (LFS)
All platforms
ELSM (Extreme Link Status Monitoring)
All platforms
ACLs, applied on ingress ports
• IPv4
• Static
All platforms
ACLs, applied on ingress ports
IPv6
Dynamic
Summit family switches
SummitStack
BlackDiamond 8000 series
ACLs, applied on egress ports
Summit X460, X480, X670, and X770 series
switches
BlackDiamond 8000 c-, xl-, and xm-series
modules
ACLs, ingress meters
Summit family switches
SummitStack
BlackDiamond 8000 series
ACLs, egress meters
Summit X460, X480, X670, and X770 series
switches
BlackDiamond 8000 c-, xl-, and xm-series
modules
ACLs
• Layer-2 protocol tunneling
• Byte counters
Summit family switches
SummitStack
BlackDiamond 8000 series
MSM/MM hitless failover for STP
BlackDiamond 8000 series
MSM hitless failover for ESRP
BlackDiamond 8000 series
•
•
ExtremeXOS Feature License Requirements
10
Feature License Requirements
Table 4: ExtremeXOS L2 Edge License Features (continued)
ExtremeXOS Software Feature
Supported Platforms
MSM/MM hitless failover - Additional capabilities: EAPS, NetLogin, BlackDiamond 8000 series
PoE. Graceful Restart for OSPF, BGP
CPU DoS protect
All platforms
CPU Monitoring
All platforms
SNMPv3
All platforms
SSH2 server
All platforms
SSH2 client
All platforms
SCP/SFTP client
All platforms
SCP/SFTP server
All platforms
RADIUS and TACACS+ per command authentication
All platforms
Network login
• Web based method
• 802.1X method
• MAC-based method
• Local database for MAC/web-based methods
• Integration with Microsoft NAP
• Multiple supplicants - same VLAN
• HTTPS/SSL for web-based method
Summit family switches
SummitStack
BlackDiamond 8000 series
Network login—Multiple supplicants - multiple VLANs
Summit Family switches
BlackDiamond 8000 series
Trusted OUI
All platforms
MAC security
• Lockdown
• Limit
Summit family switches
SummitStack
BlackDiamond 8000 series
IP security—DHCP Option 82—L2 mode
All platforms
IP security—DHCP Option 82—L2 mode VLAN ID
All platforms
IP security—DHCP IP lockdown
All platforms
IP security—Trusted DHCP server ports
All platforms
Static IGMP membership, IGMP filters
All platforms
IPv4 unicast L2 switching
All platforms
IPv4 multicast L2 switching
All platforms
IPv4 directed broadcast
Summit family switches
SummitStack
BlackDiamond 8000 series
IPv4
Fast-direct broadcast
Ignore broadcast
Summit X460, X460-G2, X480, X670, X670G2, and X770 series switches
BlackDiamond 8000 series
IPv6 unicast L2 switching
All platforms
•
•
ExtremeXOS Feature License Requirements
11
Feature License Requirements
Table 4: ExtremeXOS L2 Edge License Features (continued)
ExtremeXOS Software Feature
Supported Platforms
IPv6 multicast L2 switching
All platforms
IPv6 netTools—Ping, traceroute, BOOTP relay, DHCP, DNS, and
SNTP.
All platforms
IGMP v1/v2 snooping
All platforms
IGMP v3 snooping
All platforms
Multicast VLAN Registration (MVR)
All platforms
Static MLD membership, MLD filters
All platforms
MLD v1 snooping
All platforms
MLD v2 snooping
All platforms
sFlow accounting
Summit family switches
BlackDiamond X8
BlackDiamond 8000 series
CLI scripting
All platforms
Web-based device management
All platforms
Web based management—HTTPS/SSL support
All platforms
XML APIs (for partner integration)
All platforms
MIBs - Entity, for inventory
All platforms
Connectivity Fault Management (CFM)
All platforms
Remote mirroring
All platforms
Egress mirroring
Summit family switches
SummitStack
BlackDiamond 8000 series
Y.1731 compliant frame delay and delay variance measurement
All platforms, except Summit X430
MVRP - VLAN Topology Management
All platforms
EFM OAM - Unidirectional Link Fault Management
All platforms, except Summit X430, Summit
X440 - L2
Edge License Features
The Edge License adds L3 routing and switching to the list of L2 features supported by the L2 Edge
license. The following table lists the features included in the Edge License. Edge license features
Note
Listed platforms that do not support this license support these features with a higher license
level.
ExtremeXOS Feature License Requirements
12
Feature License Requirements
Table 5: ExtremeXOS Edge License Features
ExtremeXOS Software Feature
Supported Platforms
CLEARFlow
All platforms that support the Edge, Advanced
Edge, and Core licenses
EAPS edge (4 max domains, single physical ring)
All platforms that support the Edge, Advanced
Edge, and Core licenses. 1
System virtual routers (VRs)
All platforms that support the Edge, Advanced
Edge, and Core licenses. 1
User-created Virtual Routers (VRs)
Virtual Router and Forwarding (VRF)
Summit X460, X460-G2, X480, X670, X670-G2,
and X770 series switches
BlackDiamond 8000 c- and xl-series modules
E4G-200, E4G-400 and BX8 series
VLAN aggregation
All platforms that support the Edge, Advanced
Edge, and Core licenses. 1
Multinetting for forwarding
All platforms that support the Edge, Advanced
Edge, and Core licenses. 1
UDP Forwarding
Summit X460, X460-G2, X480, X670, X670-G2,
and X770 series switches
BlackDiamond 8000 series
UDP BootP relay forwarding
Summit X460, X460-G2, X480, X670, X670-G2,
and X770 series switches
BlackDiamond 8000 series
IPv4 unicast routing, including static routes
All platforms that support the Edge, Advanced
Edge, and Core licenses. 1.
IPv4 multicast routing, including static routes
All platforms that support the Edge, Advanced
Edge, and Core licenses. 1.
IPv4 Duplicate Address Detection (DAD)
Summit family switches
SummitStack
BlackDiamond 8000 series
IPv6 unicast routing, including static routes
All platforms that support the Edge, Advanced
Edge, and Core licenses. 1
IPv6 interworking—IPv6-to-IPv4 and IPv6-in-IPv4 configured
tunnels
All platforms that support the Edge, Advanced
Edge, and Core licenses. 1
IPv6 Duplicate Address Detection (DAD) without CLI
management
All platforms that support the Edge, Advanced
Edge, and Core licenses. 1
IPv6 Duplicate Address Detection (DAD) with CLI management Summit family switches
SummitStack
BlackDiamond 8000 series
IP security:
DHCP Option 82—L3 mode
DHCP Option 82—L3 mode VLAN ID
Disable ARP learning
Gratuitous ARP protection
DHCP secured ARP / ARP validation
•
•
•
•
•
1
All platforms that support the Edge, Advanced
Edge, and Core licenses. 1
see Table 3: Standard and Upgrade Licenses for ExtremeXOS Switches on page 7
ExtremeXOS Feature License Requirements
13
Feature License Requirements
Table 5: ExtremeXOS Edge License Features (continued)
ExtremeXOS Software Feature
Supported Platforms
IP address security:
• DHCP snooping
• Trusted DHCP server
• Source IP lockdown
• ARP validation
Summit X460, X460-G2, X480, X670, X670-G2,
and X770 series switches
BlackDiamond 8000 series
IP Flow Information Export (IPFIX)
BlackDiamond 8900 G96Tc, G48T-xl, G48X-xl
and 10G8X-xl modules
Summit X460 and X480 switches
E4G-400 cell site routers
Multi-Switch Link Aggregation Group (MLAG)
BlackDiamond 8800 Series Modules
Summit family switches
SummitStack
Policy based routing (PBR) for IPv4
Summit X440, X460, X460-G2, X480, X670,
X670-G2, and X770 series switches
BlackDiamond 8000 series modules
Policy based routing (PBR) for IPv6
Summit X460, X480, X670, and X770 series
switches
SummitStack
BlackDiamond 8900 c- and xl-series modules
PIM snooping
All platforms that support the Edge, Advanced
Edge, and Core licenses. 1
Protocol-based VLANs
All platforms that support the Edge, Advanced
Edge, and Core licenses. 1
RIP v1/v2
All platforms that support the Edge, Advanced
Edge, and Core licenses. 1
RIPng
All platforms that support the Edge, Advanced
Edge, and Core licenses. 1
Routing access policies
All platforms that support the Edge, Advanced
Edge, and Core licenses. 1
Route maps
All platforms that support the Edge, Advanced
Edge, and Core licenses. 1
Universal Port—VoIP auto configuration
All platforms that support the Edge, Advanced
Edge, and Core licenses. 1
Universal Port—Dynamic user-based security policies
All platforms that support the Edge, Advanced
Edge, and Core licenses. 1
Universal Port—Time-of-day policies
All platforms that support the Edge, Advanced
Edge, and Core licenses. 1
ExtremeXOS Feature License Requirements
14
Feature License Requirements
Table 5: ExtremeXOS Edge License Features (continued)
ExtremeXOS Software Feature
Supported Platforms
SummitStack (switch stacking using native or dedicated ports)
Summit X440-24p, X440-24t, X440-8p and
X440-48p using dedicated SummitStack ports,
and X460 family switches, and E4G-400 with a
SummitStack or SummitStack V-80 module.
Summit X440-8t, X440-48t with dedicated
SummitStack ports.
Summit X440-24t-10G with ethernet ports.
Summit X460-G2 with X460-G2-VIM-2SS
optional card.
Summit X480 family switches with a VIM2SummitStack, VIM2-SummitStack-V80, or
VIM2-SummitStack128 module.
Summit X670V switches with a VIM4-40G4X
module.
SummitStack-V (switch stacking using dual purpose data ports) Summit X770-32 using port 101-104. See the
platforms listed in Support for Alternative Stack
Ports in the Basic Switch Operation volume of
the ExtremeXOS User Guide.
Advanced Edge License Features
The Advanced Edge License includes all Edge License features and the features in the following table.
Note
Listed platforms that do not support this license support these features with a higher license
level.
Table 6: ExtremeXOS Advanced Edge License Features
2
ExtremeXOS Software Feature
Supported Platforms
EAPS Advanced Edge (multiple physical rings)
All platforms that support the Advanced Edge
and Core licenses.
ERPS-more domains (allows 32 rings with matching ring ports)
BlackDiamond 8000 series
Summit family switches
ESRP-Full
Summit X460, X480, X670, and X770 series
switches
BlackDiamond 8000 series
ESRP-Virtual MAC
BlackDiamond 8000 series
Summit family switches
OSPFv2-Edge (limited to max of 4 active interfaces)
All platforms that support the Advanced Edge
and Core licenses. 2
OSPFv3-Edge (limited to max of 4 active interfaces)
All platforms that support the Advanced Edge
and Core licenses. 2
see Table 3: Standard and Upgrade Licenses for ExtremeXOS Switches on page 7
ExtremeXOS Feature License Requirements
15
Feature License Requirements
Table 6: ExtremeXOS Advanced Edge License Features (continued)
ExtremeXOS Software Feature
Supported Platforms
PIM-SM-Edge (limited to max of 4 active interfaces)
All platforms that support the Advanced Edge
and Core licenses. 2
VRRP
All platforms that support the Advanced Edge
and Core licenses. 2
Core License Features
The Core License includes all Edge License features, Advanced Edge License features, and the features
in the following table.
Table 7: ExtremeXOS Core License Features
ExtremeXOS Software Feature
Supported Platforms
EAPS "Full" (common links)
Core license platforms listed in Table 3:
Standard and Upgrade Licenses for
ExtremeXOS Switches on page 7
PIM DM "Full"
Core license platforms listed in Table 3:
Standard and Upgrade Licenses for
ExtremeXOS Switches on page 7
PIM SM "Full"
Core license platforms listed in Table 3:
Standard and Upgrade Licenses for
ExtremeXOS Switches on page 7
PIM SSM "Full"
Core license platforms listed in Table 3:
Standard and Upgrade Licenses for
ExtremeXOS Switches on page 7
OSPFv2 "Full" (not limited to 4 active interfaces)
Core license platforms listed in Table 3:
Standard and Upgrade Licenses for
ExtremeXOS Switches on page 7
OSPFv3 "Full" (not limited to 4 active interfaces)
Core license platforms listed in Table 3:
Standard and Upgrade Licenses for
ExtremeXOS Switches on page 7
BGP4 and MBGP (BGP4+) for IPv4ECMP
Core license platforms listed in Table 3:
Standard and Upgrade Licenses for
ExtremeXOS Switches on page 7
BGP4 and MBGP (BGP4+) for IPv6
Core license platforms listed in Table 3:
Standard and Upgrade Licenses for
ExtremeXOS Switches on page 7
IS-IS for IPv4
Core license platforms listed in Table 3:
Standard and Upgrade Licenses for
ExtremeXOS Switches on page 7
IS-IS for IPv6
Core license platforms listed in Table 3:
Standard and Upgrade Licenses for
ExtremeXOS Switches on page 7
ExtremeXOS Feature License Requirements
16
Feature License Requirements
Table 7: ExtremeXOS Core License Features (continued)
ExtremeXOS Software Feature
Supported Platforms
MSDP
Core license platforms listed in Table 3:
Standard and Upgrade Licenses for
ExtremeXOS Switches on page 7
Anycast RP
Core license platforms listed in Table 3:
Standard and Upgrade Licenses for
ExtremeXOS Switches on page 7
Feature Pack Features
The ExtremeXOS software features are listed in the following table are managed as feature packs.
Table 8: ExtremeXOS Feature Pack Features
Feature Pack
Feature
CNA Feature
Pack
Provides the client software to work All platforms.
with the Converged Network
Analyzer (CNA) software from
Avaya Inc.®
Yes (ssh xmod
must be
installed first)
Direct Attach
Feature Pack
Direct attach
No
ExtremeXOS Feature License Requirements
Platform Support
Summit X460, X480, X670, and X770
series switches
BlackDiamond 8800 series switches
BlackDiamond X8 series switches
XMOD Required
17
Feature License Requirements
Table 8: ExtremeXOS Feature Pack Features (continued)
Feature Pack
Feature
Platform Support
MPLS Feature
Pack (IPv4 only)
•
•
•
•
•
•
Summit X460 3, X480, X670, and X770 No
series switches.
E4G-200 and E4G-400 cell site routers.
•
•
•
•
•
•
•
•
Legacy CLI
Feature Pack
MPLS
LDP
Static LSPs
OSPF-TE
MPLS label
EXP bit replacement and
classification
RSVP-TE
VPLS / H-VPLS for VLANs
VPLS STP Redundancy
VPWS with ESRP redundant
access
Fast Reroute (FRR)
Support for PW counters
User Virtual Routers
L3VPN
Support for legacy CLI commands
Network Timing Precision Time Protocol (PTPv2)
Feature Pack
6
5
BlackDiamond 8900 xm-series
modules 6
BlackDiamond X8 series switches
All platforms.
Yes
E4G-200 and E4G-400 cell site routers No
Summit X460, X460-G2, X670-G2, and
X770 Series switches
Secure Shell 2 (SSH2)
Secure Copy Protocol 2 (SCP2)
Secure File Transfer Protocol
(SFTP)
All platforms
Yes
AVB Feature
Pack
•
Generalized Precision Time
Protocol (GPTP)
Multiple VLAN Registration
Protocol (MVRP)
Multiple Stream Registration
Protocol (MSRP)
Platform Support
Summit X430, X440, X460, and X670
series switches
No
Summit X440, X460, X480, and X670
series switches
Yes
OpenFlow
Feature Pack
5
BlackDiamond 8900 xl-series modules.
•
•
•
•
•
3
4
SSH Feature
Pack
•
4
XMOD Required
OpenFlow
Summit X460 switches require the Advanced Edge or Core license to support MPLS.
For the E4G-200, you obtain the MPLS feature pack by upgrading to an Advanced Edge license. For the E4G-400,
the Advanced Edge license is standard and already includes the MPLS feature pack.
To run MPLS with BlackDiamond 8900 xl-series modules, a BlackDiamond 8800 series switch requires ExtremeXOS
Release 12.5 or later, BlackDiamond 8900-MSM128, and BlackDiamond 8900 xl-series modules. No other modules
are supported when MPLS runs on a BlackDiamond 8800 series switch with ExtremeXOS 12.5.
To run MPLS with BlackDiamond 8900 xm-series modules, a BlackDiamond 8800 series switch requires
ExtremeXOS Release 12.6 or later, BlackDiamond 8900-MSM128, and BlackDiamond 8900 xl- or xm-series modules.
No other modules are supported when MPLS runs on a BlackDiamond 8800 series switch with ExtremeXOS 12.6 or
later.
ExtremeXOS Feature License Requirements
18
Feature License Requirements
Table 8: ExtremeXOS Feature Pack Features (continued)
Feature Pack
Feature
Platform Support
XMOD Required
TRILL Feature
Pack
TRILL
Summit X670, X770
BlackDiamond X8
No
Only platforms with 40G and/or 100G
ports
No
Capacity based
License for
Ports Feature
Pack
Feature packs are distributed in one of the following forms:
• Software component within ExtremeXOS software
• Modular software package, which is also known as an xmod file (due to the .xmod filename
extension)
To start using a feature pack that is a component of ExtremeXOS, you must purchase a license to use
the feature pack as described in Software Upgrade and Boot Options in the ExtremeXOS User Guide.
To start using a feature pack that is distributed in a modular software package, you must request the
xmod file from your supplier and install it as described in Installing a Modular Software Package in the
ExtremeXOS User Guide.
Note
The SSH feature pack is the exception to the above rules. The SSH feature pack is distributed
in a modular software package and requires a license before feature operation. There is no
charge for the license.
ExtremeXOS Non-Extreme Optics Licensing
Currently you can purchase and use optical devices from Extreme Networks to attach to high-speed
ports, and you can also purchase and use optical devices from third-party vendors. In keeping with
standard industry practices, Extreme Networks restricts the use of high-speed third-party optical
devices, unless you purchase a feature license to allow their unrestricted use (direct support for such
usage will continue to be limited).
Note
This feature does not require an xmod.
This feature creates a feature license named "3rd Party Optics". Like other feature licenses, once you
apply the license to a specific box, that box is permanently enabled to allow the unrestricted use of
third-party high speed transceivers. Without a license, ports that are attached to such devices are
continuously restricted. This restriction does not apply to stacking ports.
A restricted port has egress rate limiting applied applied at the rate of 25% of capacity. All egress traffic
is subject to the rate limiter, as if a user-defined egress rate limiter were configured and enabled. The
restriction is flagged by show command output, and warning messages are issued when optical
ExtremeXOS Feature License Requirements
19
Feature License Requirements
devices are inserted and at port ‘enable’ time (CLI enable). The restriction is lifted when the proper
license is installed.
Note
Purchase of a single optics license allows all third-party devices for the life of the box.
When the first third-party high speed transceiver is detected, the system odometer value is stored in
nvram. This serves as the start time for the 90 day trial period. During the trial period, warning
messages are generated whenever a third-party high speed transceiver is detected, an attached port is
enabled, or when another day ticks off the trial period; but the ports will not be restricted until the trial
period ends. No warnings are generated if there are no flagged transceivers attached, but the trial
period will continue to count down. When the trial period expires, ports are restricted when the next
enable is performed (a port actively forwarding data will not be immediately restricted).
Caveats and Restrictions
The ExtremeXOS 3rd Party Optics Licensing feature has the following caveats and restrictions:
•
•
The system reads and interprets the license information, and maintains a flag that indicates the
presence of the optics license.
The system reads and interprets the trial period time, and generates a message if a threshold is
reached.
At optical device insertion time:
•
•
•
•
•
•
If the optical device license is installed, no further action is necessary.
If the device is an Extreme device, no further action is necessary.
If this is the first third-party high speed device detected, tells EMP process to start the trial period.
Sets appropriate flags in the port media data, distributes to VlanMgr process.
Adds rate limiter restriction if necessary.
Generates warning messages as appropriate.
If you remove the device, the following conditions occur:
• The system updates port media data, and distribute to VlanMgr process.
When you enable a port, the following conditions occur:
•
•
•
The system determines if the port is restricted (especially in cases where the trial period expired,
and the port was active before).
The system generates a warning message to a console with restricted ports.
The system generates a warning EMS message that indicates a restriction, or trial period status.
When you enable a license, the system reads and interprets the new license information. If it
determines the optics license is now active, and it was not active before, the following conditions occur:
•
•
Sets the optics license present flag.
Searches the port list for restricted ports, sets flags, and distributes to VlanMgr.
ExtremeXOS Feature License Requirements
20
Feature License Requirements
•
Removes all restriction indications.
Note
This feature requires you to coordinate with other Extreme corporate processes, including
how to generate a license, and how to purchase a license.
Supported Platforms
All platforms that support high-speed optical devices are supported with this feature. The current list of
devices subject to restriction includes:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
QSFP+ SR4
QSFP+ LR4
QSFP+ Passive Copper 0.5m Cable
QSFP+ Passive Copper 1m Cable
QSFP+ Passive Copper 2m Cable
QSFP+ Passive Copper 3m Cable
QSFP+ Passive Copper 5m Cable
QSFP+ Active Optical 5m Cable
QSFP+ Active Optical 10m Cable
QSFP+ Active Optical 20m Cable
QSFP+ Active Optical 50m Cable
QSFP+ Active Optical 100m Cable
QSFP+ to SFP+ Fan Out Passive Copper 1m Cable - QSFP+ end
QSFP+ to SFP+ Fan Out Passive Copper 2m Cable - QSFP+ end
QSFP+ to SFP+ Fan Out Passive Copper 3m Cable - QSFP+ end
QSFP+ to SFP+ Fan Out Passive Copper 5m Cable - QSFP+ end
CFP2 LR4
CFP2 SR10
CNA Feature Pack
The CNA feature pack is distributed in an modular software package and provides the client software
required to work with the Converged Network Analyzer (CNA) software from Avaya Inc.®
For more information on CNA, see CNA Agent.
Direct Attach Feature Pack
The Direct Attach feature, which is based on the IEEE version of VEPA, eliminates the virtual switch
layer, simplifying the network and improving performance.
Direct Attach enables data center simplification by reducing network tiers from four or five tiers to just
two or three tiers, depending on the size of the data center.
This feature pack is included with all ExtremeXOS software licenses and can be enabled by purchasing
and enabling a feature pack license key.
ExtremeXOS Feature License Requirements
21
Feature License Requirements
For more information the direct attach feature, see Managing Direct Attach to Support VEPA in the
ExtremeXOS User Guide.
Legacy CLI Feature Pack
The Legacy CLI feature enables those who have experience with legacy, mode-based CLIs to use
familiar commands to start using the ExtremeXOS software using commands they already know.
The Legacy CLI feature is distributed in a file that you can download and install as described in
Software Upgrade and Boot Options.
For more information on the Legacy CLI feature, see the Legacy CLI Quick Reference Guide.
MPLS Feature Pack (IPv4 Only)
MPLS support, including VPLS L2 VPNs and L3 VPNs, can be obtained from Extreme Networks at an
additional cost, as a feature pack.
Note
The MPLS Feature Pack features are supported only on the platforms listed in the Feature
License Requirements document.. BlackDiamond 8800 series switches require specific
software and hardware to support MPLS, and these requirements are specified in the same
preceding table.
A separate feature pack must be purchased for each switch that will run MPLS and VPLS.
This feature pack is included with the Advanced Edge and Core software licenses and can be enabled
by purchasing and enabling a feature pack license key.
After you enable the feature pack, the feature CLI commands are visible; without an enabled MPLS
feature pack, you do not see any feature commands on the console.
Network Timing Feature Pack
The Network Timing Feature Pack supports the Precision Time Protocol (PTPv2) feature on the Summit
X460-G2, X670-G2, and X770 Series switches, and the E4G-200 and E4G-400 cell site routers.
This feature pack is included with all ExtremeXOS software licenses and can be enabled by purchasing
and enabling a feature pack license key. The Network Timing Feature Pack is available only on
E4G-200, E4G-400, X770, X670-G2, and X460-G2.
For more information about PTPv2, see Overview of PTP in the ExtremeXOS User Guide.
SSH Feature Pack
Secure Shell 2 (SSH2) is a feature of the ExtremeXOS software that allows you to encrypt session data
between a network administrator using SSH2 client software and the switch or to send encrypted data
from the switch to an SSH2 client on a remote system.
ExtremeXOS Feature License Requirements
22
Feature License Requirements
Configuration, image, public key, and policy files can be transferred to the switch using the Secure
Copy Protocol 2 (SCP2) or the Secure File Transfer Protocol (SFTP).
SSH contains strong encryption algorithms which heighten the export controls required in the US and
other countries. Once the export clearance requirements are met, there is no charge to download the
SSH modular software package and enable this feature. For more information, see Software Upgrade
and Boot Options
For more information on SSH2, see Using Secure Shell 2 in the ExtremeXOS User Guide.
ExtremeXOS Feature License Requirements
23

Similar documents

×

Report this document