phyBOARD WEGA-AM335x Single Board Computer - Hardware Manual

Document technical information

Format pdf
Size 1.6 MB
First found Jun 9, 2017

Document content analysis

Language
English
Type
not defined
Concepts
no text concepts found

Persons

Theodore Roosevelt
Theodore Roosevelt

wikipedia, lookup

Organizations

Places

Transcript

phyBOARD WEGA-AM335x
Single Board Computer - Hardware Manual
Product No.
SOM PCB No.
CB PCB No.
Edition
© PHYTEC Embedded Pvt. Ltd. 2014
:
:
:
:
PCL-051/PBA-CD-02
1397.0
1405.0
March, 2014
1
In this manual descriptions are for copyrighted products that are not explicitly indicated as such. The
absence of the trademark (TM) and copyright (©) symbols does not imply that a product is not
protected. Additionally, registered patents and trademarks are similarly not explicitly indicated in this
manual.
The information in this document has been carefully checked and is believed to be entirely reliable.
However, PHYTEC Embedded Pvt. Ltd assumes no responsibility for any inaccuracies. PHYTEC
Embedded Pvt. Ltd neither gives any guarantee nor accepts any liability whatsoever for consequential
damages resulting from the use of this manual or its associated product. PHYTEC Embedded Pvt. Ltd
reserves the right to alter the information contained herein without prior notification and accepts no
responsibility for any damages which might result.
Additionally, PHYTEC Embedded Pvt. Ltd offers no guarantee nor accepts any liability for damages
arising from the improper usage or improper installation of the hardware or software. PHYTEC
Embedded Pvt. Ltd further reserves the right to alter the layout and/or design of the hardware without
prior notification and accepts no liability for doing so.
© Copyright 2014 PHYTEC Embedded Pvt. Ltd, Koramangala, Bangalore INDIA.
Rights - including those of translation, reprint, broadcast, photomechanical or similar reproduction and
storage or processing in computer systems, in whole or in part - are reserved. No reproduction may
occur without the express written consent from PHYTEC Embedded Pvt. Ltd.
India
Address:
Europe
North America
PHYTEC Embedded Pvt. PHYTEC Technologies PHYTEC America LLC
Ltd.
Holding AG
203 Parfitt Way SW,
#16/9C, 3rd Floor, 3rd
Robert-Koch-Str. 39
Suite G100 Bainbridge
Main, Opp. Police Station 55129 Mainz GERMANY Island, WA 98110 USA
Koramangala, 8thblock,
Bangalore -560095
India
Ordering
Information:
+91-80-40867046
[email protected]
+49 (800) 0749832
[email protected]
1 (800) 278-9913
[email protected]
Web Site:
http://www.phytec.in
http://www.phytec.de
http://www.phytec.com
© PHYTEC Embedded Pvt. Ltd. 2014
2
Table of Contents
TABLE OF CONTENTS .................................................................................................................................................................3
CONVENTIONS, ABBREVIATIONS, AND ACRONYMS............................................................................................................5
CONVENTIONS ..............................................................................................................................................................................5
ABBREVIATIONS AND ACRONYMS .......................................................................................................................................................... 5
TABLE-1. ABBREVIATIONS AND ACRONYMS USED IN THIS MANUAL ...........................................................................5
TABLE-2. ABBREVIATIONS AND ACRONYMS USED IN THIS MANUAL ...........................................................................6
TABLE-3. TYPES OF SIGNALS ...................................................................................................................................................6
DECLARATION OF ELECTRO MAGNETIC CONFORMITY OF THE PHYBOARD-WEGA-AM335X ............................................................. 7
PRODUCT CHANGE MANAGEMENT ........................................................................................................................................8
AVOIDANCE STRATEGIES ........................................................................................................................................................................ 8
CHANGE MANAGEMENT IN CASE OF FUNCTIONAL CHANGES .................................................................................................................. 8
SW MAINTENANCE................................................................................................................................................................................. 8
CHANGE MANAGEMENT IN RARE EVENT OF AN OBSOLETE AND NON REPLACEABLE PART ....................................................................... 8
1. INTRODUCTION ........................................................................................................................................................................9
1.1
HARDWARE OVERVIEW:...................................................................................................................................................9
1.2 FEATURES OF THE PHYBOARD-WEGA-AM335X: .......................................................................................................................... 9
1.4 VIEW OF THE PHYBOARD-WEGA-AM335 X:................................................................................................................................ 11
2. PCL-051/PHYCORE-AM335X SYSTEM ON MODULE........................................................................................................ 12
3. ACCESSING THE PHYBOARD-WEGA INTERFACES: ....................................................................................................... 13
3.1 CONCEPT OF THE PHYBOARD-WEGA: .......................................................................................................................................... 13
3.2 OVERVIEW OF THE PHYBOARD-WEGA PERIPHERALS: ................................................................................................................. 13
3.3 CONNECTORS AND PIN HEADER: ................................................................................................................................................... 14
TABLE-4: CONNECTORS DESCRIPTION ................................................................................................................................ 14
4. LEDS: ........................................................................................................................................................................................ 15
5. FUNCTIONAL COMPONENTS ON THE PHYBOARD-WEGA BOARD: ............................................................................ 15
5.1 POWER SUPPLY CAUTION: ............................................................................................................................................................. 15
5.1.1 PHOENIX 2-POLE BASE STRIP ................................................................................................................................................. 16
5.1.2 USB MICRO AB ......................................................................................................................................................................... 16
5.1.3. WAGO 6-POLE MALE HEADER ................................................................................................................................................. 17
5.2 POWER LED D58 ........................................................................................................................................................................... 17
5.3 VBAT AND RTC............................................................................................................................................................................. 17
5.4 RS-232 CONNECTIVITY (X66)....................................................................................................................................................... 17
5.5 ETHERNET CONNECTIVITY (X16 ANDX17) .................................................................................................................................... 18
5.6 USB CONNECTIVITY (X15 AND X42) .......................................................................................................................................... 19
COMPONENTS SUPPORTING THE USB INTERFACES ............................................................................................................................... 19
5.8 CAN CONNECTIVITY ..................................................................................................................................................................... 20
5.9 SECURE DIGITAL MEMORY CARD/ MULTIMEDIA CARD (X11) ...................................................................................................... 21
© PHYTEC Embedded Pvt. Ltd. 2014
3
5.10 I2C CONNECTIVITY ................................................................................................................................................................... 22
5.11 S YS TE M RESET BUTTON (S2): .................................................................................................................................................... 22
6. SYSTEM LEVEL HARDWARE INFORMATION .................................................................................................................. 23
6.1 AUDIO/VIDEO CONNECTORS (X70 & X71) ................................................................................................................................... 23
7. EXPANSION CONNECTOR: .................................................................................................................................................. 25
8. TECHNICAL SPECIFICATIONS............................................................................................................................................. 27
TABLE-5. TECHNICAL SPECIFICATIONS................................................................................................................................................. 27
9. REVISION HISTORY ............................................................................................................................................................... 27
TABLE-6 REVISION HISTORY ............................................................................................................................................................... 27
10. PLACMENT DIAGRAMS...................................................................................................................................................... 28
FIGURE 16. PLACEMENT DIAGRAM OF PHYBOARD-WEGA-AM335X ............................................................................................... 28
© PHYTEC Embedded Pvt. Ltd. 2014
4
Conventions, Abbreviations, and Acronyms
Conventions
The conventions used in this manual are as follows:
• Signals that are preceded by a “/” character are designated as active low signals. Their active state
is when they are driven low, or are driving low;
for Example: /RESET.
• Tables show the default setting or jumper position in bold, text.
• References made to the phyCORE-Connector always refer to the high density SAMTEC
connectors on the underside of the phyBOARD-WEGA-AM335x System on Module.
Abbreviations and Acronyms
Many acronyms and abbreviations are used throughout this manual. Use the table below to navigate
unfamiliar terms used in this document.
Table-1. Abbreviations and Acronyms Used in This Manual
Abbreviation
BSP
CB
DFF
EMB
EMI
GPI
GPIO
GPO
IRAM
J
JP
PCB
PDI
PEB
PMIC
PoE
PoP
RTC
SMT
Definition
Board Support Package (Software delivered with the
Development Kit including an operating system (Windows or
Linux) preinstalled on the module and Development Tools).
Carrier Board; used in reference to the 1404.0
D flip-flop
External memory bus
Electromagnetic Interference
General purpose input
General purpose input and output
General purpose output
Internal RAM; the internal static RAM on the TI AM335x
processor
Solder jumper; these types of jumpers require solder equipment
to remove and place
Solder less jumper; these types of jumpers can be removed and
placed by hand with no special tools
Printed circuit board
PHYTEC Display Interface; defined to connect PHYTEC
display adapter boards or custom adapters
PHYTEC Extension Board
Power Management Integrated Circuit
Power over Ethernet
Package on Package
Real-time clock
Surface mount technology
© PHYTEC Embedded Pvt. Ltd. 2014
5
Table-2. Abbreviations and Acronyms Used in This Manual
Abbreviation
Definition
SOM
System on Module; used in reference to the PCL-051/WEGA Board
System on Module
TRM
Technical Reference Manual
VBAT
SOM battery supply input
Different types of signals are brought out at the phyCORE-Connector. The following table lists the
abbreviations used to specify the type of a signal.
Table-3. Types of Signals
Type of Signal
Description
Abbreviation
Power
Supply voltage
PWR
Ref-Voltage
Reference voltage
REF
USB-Power
USB voltage
USB
Input
Digital input
IN
Output
Digital output
OUT
Input with pull-up
Input with pull-up (jumper or
open-collector output)
IPU
Input/output
Bidirectional input/output
IO
5V Input with
pull-down
5V tolerant input with pull-down
5V_PD
LVDS
Differential line pairs 100 Ohm
LVDS level
LVDS
Differential 90
Ohm
Differential line pairs 90 Ohm
DIFF90
Differential 100
Ohm
Differential line pairs 100 Ohm
DIFF100
Analog
Analog input or output
Analog
© PHYTEC Embedded Pvt. Ltd. 2014
6
Preface
This phyBOARD-WEGA-AM335x Board Hardware Manual describes the System on Module's design
and functions. Precise specifications for the TI AM335x processor can be found in the processor
datasheet and/or user’s manual.
In this hardware manual and in the schematics, active low signals are denoted by a "/" preceding the
signal name, for example: /RD. A "0" represents logic-zero or low-level signal, while a "1" represents a
logic one or high-level signal.
Declaration of Electro Magnetic Conformity of the phyBOARD-WEGA-AM335x
PHYTEC System on Modules (SOMs) are designed for installation in electrical appliances or, combined
with the PHYTEC Carrier Board, can be used as dedicated Evaluation Boards (for use as a test and
prototype platform for hardware/software development) in laboratory environments.
CAUTION:
PHYTEC products lacking protective enclosures are subject to damage by ESD and,
hence, may only be unpacked, handled or operated in environments in which
sufficient precautionary measures have been taken in respect to ESD-dangers. It is
also necessary that only appropriately trained personnel (such as electricians,
technicians and engineers) handle and/or operate these products. Moreover, PHYTEC
products should not be operated without protection circuitry if connections to the
product's pin header rows are longer than 3 mm.
PHYTEC products fulfil the norms of the European Union's Directive for Electro Magnetic Conformity
only in accordance to the descriptions and rules of usage indicated in this hardware manual (particularly
in respect to the pin header row connectors, power connector and serial interface to a host-PC).
Implementation of PHYTEC products into target devices, as well as user
modifications and extensions of PHYTEC products, is subject to renewed
establishment of conformity to, and certification of, Electro Magnetic Directives.
Users should ensure conformance following any modifications to the products as well
as implementation of the products into target systems.
The phyBOARD-WEGA-AM335x Board is one of a series of PHYTEC System on Modules that can be
populated with different controllers and, hence, offers various functions and configurations. PHYTEC
supports a variety of 8/16 and 32-bit controllers in two ways:
1. As the basis for Rapid Development Kits which serve as a reference and Evaluation platform.
2. As insert-ready, fully functional phyCORE OEM modules, which can be
Embedded directly into the user's peripheral hardware design.
© PHYTEC Embedded Pvt. Ltd. 2014
7
Implementation of an OEM-able SOM subassembly as the "core" of your embedded design allows
you to focus on hardware peripherals and firmware without expending resources to "re-invent"
microcontroller circuitry. Furthermore, much of the value of the phyCORE module lies in its layout and
test.
“Production-ready Board Support Packages (BSPs)” and Design Services for our hardware further
reduce development time and expenses. Take advantage of PHYTEC products to shorten time-tomarket, reduce development costs, and avoid substantial design issues and risks.
For more information refer to: http://www.phytec.in/services/hardware.html
Product Change Management
In addition to our HW and SW offerings, the buyer will receive a free obsolescence maintenance
service for the HW provided when purchasing a PHYTEC SOM.
Our Product Change Management Team of developers is continuously processing all incoming
PCN's (Product Change Notifications) from vendors and distributors concerning parts which are being
used in our products. Possible impacts to the functionality of our products, due to changes of
functionality or obsolesce of a certain part, are evaluated in order to take the right measures in
purchasing or within our HW/SW design.
Our general philosophy here is: We never discontinue a product as long as there is demand for it.
Therefore a set of methods has been established to fulfil our philosophy:
Avoidance strategies
• Avoid changes by evaluating longevity of a part during design-in phase.
• Ensure availability of equivalent second source parts.
• Maintain close contact with part vendors for awareness of roadmap strategies.
Change management in case of functional changes
• Avoid impacts on Product functionality by choosing equivalent replacement parts.
• Avoid impacts on Product functionality by compensating changes through HW redesign or
backward compatibility
SW maintenance
• Provide early change notifications concerning functional relevant changes of our Products.
Change management in rare event of an obsolete and non replaceable part
• Ensure long term availability by stocking parts through last time buy management, according to
product forecasts.
• Offer long term frame contract to customers.
We refrain from providing detailed, part-specific information within this manual, which is subject to
changes, due to ongoing part maintenance for our products.
© PHYTEC Embedded Pvt. Ltd. 2014
8
1. Introduction
1.1
Hardware Overview:
The WEGA Board for phyCORE-AM335x is a low-cost, feature-rich software development platform
supporting the TI AM335x processor families. At the core of the phyBOARD-WEGA-AM335x is the
PCL-051/phyCORE-AM335x System On Module (SOM) in a direct solder form factor, containing the
AM335x processor, SDRAM, NAND Flash, power regulation, supervision, transceivers and other core
functions required to support the phyBOARD-WEGA-AM335x. Surrounding the SOM is the PBA-CD02/ phyBOARD-WEGA-AM335x Carrier, adding power input, buttons, connectors, signal breakout
amongst other features.
The PCL-051 System On Module is a connector-less, BGA style variant of the PCM-051/phyCOREAM335x SOM. Unlike traditional PHYTEC SOM products that support high density connectors, the
PCL-051 SOM is directly soldered down to its Carrier Board using PHYTEC's Direct Solder Connect
technology. This solution offers an ultra-low cost Single Board Computer for the AM335x processor,
while maintaining most of the advantages of the SOM concept.
Adding the phyCORE-AM335x SOM into your own design is as simple as ordering the connectored
version (PCM-051) and making use of our phyBOARD-WEGA-AM335x Carrier Board (PBA-CD-02),
or RDK Carrier Board (PCM-953) reference schematics. A summary of the phyBOARD-WEGAAM335x features, along with a block diagram are presented below.
1.2 Features of the phyBOARD-Wega-AM335x:













The phyBOARD-Wega-AM335x supports the following features
PHYTEC’s phyCORE-AM335x SOM with Direct Solder Connect (DSC)
Pico ITX standard dimensions (100mm×72mm) Boot from MMC or NAND Flash Max. 1 GHz core
clock frequency.
Three different power supply options (5V only with 3.5mm comb icon or micro USB connector,
external power module e.g. 12V-24V input voltage).
Two RJ45 jacks for 10/100 Mbps Ethernet
One USB OTG interface available at an USB Micro-AB connector at the back side one secure
Digital/Multi Media memory card interface brought out to a Micro-SD connector at the back side
CAN interface at 5x2 pin header 2.54mm
Audio codec with stereo Line in and Line out (3x2 pin header 2.54mm) and mono speaker (2-pole
Molex)
RS-232 transceiver supporting UART1 incl. Handshake signals with data rates of up to 1 Mbps
(5x2 pin header 2.54mm)
Reset – Button
Audio/Video (A/V)connectors
Expansion connector
Backup battery supply for RTC with Gold cap (lasts approx. 17 ½ days)
© PHYTEC Embedded Pvt. Ltd. 2014
9
phyBOARD Wega AM335x Block Diagram.
© PHYTEC Embedded Pvt. Ltd. 2014
10
phyBOARD Wega AM335x
1.4 View of the phyBOARD-Wega-AM335x:
X66
© PHYTEC Embedded Pvt. Ltd. 2014
11
2. PCL-051/phyCORE-AM335x System on Module
This chapter gives a brief introduction to the PCL-051/phyCORE-AM335x System on Module
(SOM), highlighting its benefits and features. For more detailed information, please refer to the
Hardware Manual for the modular, connectored version of the SOM (PCM-051) by clicking here.
The phyCORE-AM335x belongs to PHYTEC’s phyCORE System on Module (SOM) family. The
phyCORE SOMs represent the continuous development of PHYTEC SOM technology. Like its mini-,
micro-, and nano MODULE predecessors, the phyCORE boards integrate all core elements of a
microcontroller system on a sub miniature board and are designed in a manner that ensures their easy
expansion and embedding in peripheral hardware developments.
As independent research indicates that approximately 70% of all EMI (Electro Magnetic
Interference) problems stem from insufficient supply voltage grounding of electronic components in
high frequency environments, the phyCORE board design features an increased pin package. The
increased pin package allows dedication of approximately 20% of all connector pins on the phyCORE
boards to ground. This improves EMI and EMC characteristics and makes it easier to design complex
applications meeting EMI and EMC guidelines using phyCORE boards even in high noise
environments.
phyCORE boards achieve their small size through modern SMD technology and multi-layer design.
In accordance with the complexity of the module, 0402-packaged SMD components and laser-drilled
Microwave are used on the boards, providing phyCORE users with access to this cutting edge
miniaturization technology for integration into their own design.
The PCM-051, connector version of the phyCORE-AM335x is a sub-miniature (44 mm x 50 mm)
insert-ready SOM populated with AM335x processor. Its universal design enables its insertion into a
wide range of embedded applications. All processor signals and ports extend from the processor to highdensity pitch (0.5 mm) connectors aligning two sides of the board. This allows the SOM to be plugged
like a "big chip" into a target application.
The PCL-051, connector less version of the phyCORE-AM335x populating the phyBOARDWEGA-AM335x is identical to the connectored version, with the exception of the connection interface.
Instead of two high density connectors aligning the edges of the board, the PCL-051 solders directly
down to its Carrier Board with a BGA style footprint.
Precise specifications for the processor populating the board can be found in the applicable processor
user's manual and datasheet. The descriptions in this manual are based on the AM335x processor. No
description of compatible processor derivative functions is included; as such functions are not relevant
for the basic functioning of the WEGA Board.
© PHYTEC Embedded Pvt. Ltd. 2014
12
3. Accessing the phyBOARD-Wega Interfaces:
PHYTEC phyBOARD-Wega is fully equipped with all mechanical and electrical components
necessary for the speedy and secure start-up and subsequent communication to and
programming of applicable PHYTEC System on Module (SOM) modules.
phyBOARD-Wega
Boards are designed for evaluation, testing and prototyping of PHYTEC System on Module in
laboratory environments prior to their use in customer designed applications.
3.1 Concept of the phyBOARD-Wega:
The phyBOARD-Wega provides a flexible development platform enabling quick and easy startup and subsequent programming of its soldered phyCORE-AM335x System on Module. The carrier
board design allows easy connection of additional extension boards featuring various functions that
support fast and convenient prototyping and software evaluation. The carrier board is compatible
with phyCORE-AM335x only.
This modular development platform concept includes the following components:
The phyCORE-AM335x module populated by default with the AM3354 processor and all applicable
SOM circuitry such as DDR SDRAM, Flash, PHYs, and transceivers to name a few.
The phyBOARD-Wega which offers all essential components and connectors for start-up including: A
power socket which enables connection to an external power adapter, interface connectors such as DB-9,
USB and Ethernet allowing for use of the SOM's interfaces with standard cable.
The following sections contain specific information relevant to the operation of the phyCOREAM335x mounted on the phyBOARD-Wega Carrier Board.
3.2 Overview of the phyBOARD-Wega Peripherals:
The phyBOARD-Wega is depicted in above section. It features many different interfaces and is
equipped with the components as listed in above section. For a more detailed description of each
peripheral refer to the appropriate chapter listed in the applicable highlights the location of each
peripheral for easy identification.
© PHYTEC Embedded Pvt. Ltd. 2014
13
3.3 Connectors and Pin Header:
This lists all available connectors on the phyBOARD-Wega.
Table-4: Connectors description
Reference
Designator
Description
X11
Secure Digital / Multi Media Card (Micro-slot)
X15
USB Host connector (USB 2.0 Standard-A)
X16
Ethernet 0 connector (RJ45 with speed and link LED)
X17
Ethernet 1 connector (RJ45 with speed and link LED)
X42
USB On-The-Go connector (USB Micro-AB)
X55
Mono Speaker output (2-pole Molex)
X65
CAN connector (5×2 pin header)
X66
RS-232 with RTS and CTS (UART1 5×2 pin header)
X67
Power supply 5 V only (via 6-pole WAGO male header, or
2-pole PHOENIX base strip)
X69
Expansion connector (2×30 socket connector)
X70
A/V connector #1 (2×20 socket connector)
X71
A/V connector #2 (2×8 socket connector)
X72
Optional 5 V power supply via USB Micro-AB connector
X73
Stereo Line Out and Line In connector
(2×3 pin header)
Note:
Ensure that all module connections are not to exceed their expressed maximum voltage or current.
Maximum signal input values are indicated in the corresponding controller User's Manual/Data Sheets.
As damage from improper connections varies according to use and application, it is the user‘s
responsibility to take appropriate safety measures to ensure that the module connections are protected
from overloading through connected peripherals.
© PHYTEC Embedded Pvt. Ltd. 2014
14
4. LEDs:
The phyBOARD-Wega is populated with three LEDs to indicate the status of the USB VBUS
voltages, as well as of the power supply voltage.
Shows the location of the LEDs. Their function is listed in the table below:
LED
D7
Colour
green
Description
Indicates presence of VBUS1 at the USB Host interface
D8
green
Indicates presence of VBUS0 at the USB OTG interface
D5
red
3.3 V voltage generation of the phyBOARD-Wega
5. Functional Components on the phyBOARD-WEGA Board:
This section describes the functional components of the phyBOARD-Wega. Each subsection
details a particular connector/interface and associated jumpers for configuring that interface.
5.1 Power Supply Caution:
Do not change modules or jumper settings while the phyBOARD-Wega is supplied With power.
Power Connectors (X67 and X72)
The phyBOARD-Wega is available with three different power supply connectors. Depending on
your order you will find one of the following connectors on your SBC:
1. A 2-pole PHOENIX base strip 3.5 mm connector suitable for a single 5 V supply voltage, or
2. AN USB Micro-AB connector to connect a standard 5 V USB power supply, or
3. A 6-pole WAGO male header to attach the Power Module for phyBOARD-Wega (PEB-POW-01)
which provides connectivity for 12 V – 24 V
The required current load capacity for all power supply solutions depends on the specific
configuration of the phyCORE mounted on the phyBOARD-Wega the particular interfaces enabled
while executing software as well as whether an optional expansion board is connected to the carrier
board. A 5 V adapter with a minimum Supply of 1.5 A is recommended.
© PHYTEC Embedded Pvt. Ltd. 2014
15
PHOENIX base strip
WAGO male header 6-pole
5.1.1 PHOENIX 2-pole Base Strip
The permissible input voltage is +5 V DC if your SBC is equipped with a 2-pole
PHOENIX connector.
The following table show the pin assignment.
Pin
Signal
Description
1
VCC5V_IN
+5V power supply
2
GND
Ground
Pin Assignment of the 2-pole PHOENIX Connector atX67
5.1.2 USB Micro AB
If your board provides an USB Micro-AB female connector at the upper side of the board a
standard USB Micro power supply
with +5 V DC can be used to supply the phyBOARD-Wega.
Caution!
Do not confuse the USB Micro connector on the upper side of the board with the one on the back
side of the board which provides USB OTG connectivity. The USB Micro connector on the upper side
is exclusively used for power supply and has no other USB functionality!
© PHYTEC Embedded Pvt. Ltd. 2014
16
5.1.3. WAGO 6-pole Male Header
If a WAGO 6-pole male header is mounted on your board,your board is prepared to connect
to a phyBOARD-Wega Power Module (PEB-POW-01), or a custom power supply circuitry. The
mating connector from WAGO has the EAN 4045454120610.
Pin
Signal
Description
1
2
3
4
VCC5V_IN
GND
VCC3V3_PMOD
VCC_BL
5
PMOD_PWRGOOD
6
PMOD_PWRFAIL
+5 V power supply
Ground
+3.3 V power supply
Backlight power supply
Power good signal (connected to
nRESET_IN)
reset
Power fail signal
Pin Assignment of the 6-pole WAGO Connector at X67
5.2 Power LED D58
The red LED D58 right next to the power connector indicates the presence of the 3.3 V
supply voltage generated from the 5 V input voltage.
5.3 VBAT and RTC
On the phyBOARD-Wega the internal RTC of the AM335x is used for real-time or timedriven applications. To backup the RTC on the module, a gold cap (C339) is placed on the
phyBOARD-Wega. This voltage source supplies the backup voltage domain VBAT of the AM335x
which supplies the RTC and some critical registers when the primary system power, VCC5V_IN, is
removed. The backup supply lasts approximately.
5.4 RS-232 Connectivity (X66)
RS-232 Interface Connector X66
© PHYTEC Embedded Pvt. Ltd. 2014
17
Pin header connector X66 located next to the USB host connector provides the UART1
signals of the AM335x at RS-232 level. The serial interface is intended to be used as data terminal
equipment (DTE) and allows for a 5-wire connection including the signals RTS and CTS for
hardware flow control. Below table shows the signal mapping of the RS-232 level signals at
connector X66.
Pin
Signal
Pin
Signal
1
NC
2
NC
3
UART1_RXD_RS232
4
UART1_RTS_RS232
5
UART1_TXD_RS232
6
UART1_CTS_RS232
7
NC
8
NC
9
GND
10
NC
Pin Assignment of RS-232 Connector X66
An adapter cable is included in the phyBOARD-Wega-Am335x Kit to facilitate the use of the
UART1 interface. The following figure shows the signal mapping of the adapter.
5.5 Ethernet Connectivity (X16 andX17)
The Ethernet interfaces of the phyBOARD-Wega are accessible at two RJ45 connectors (X16 and
X17) on the board.
Ethernet Interfaces at Connectors X16 and X17
Both Ethernet interfaces are configured as 10/100Base-T networks. The LEDs for LINK (green)
and SPEED (yellow) indication are integrated in the connector. Both LAN8710AI Ethernet transceivers
support HP Auto-MDIX technology, eliminating the need for the consideration of a direct connect
LAN cable, or a cross-over path cable. They detect the TX and RX pins of the connected device
and automatically configure the PHY TX and RX pins accordingly.
© PHYTEC Embedded Pvt. Ltd. 2014
18
5.6 USB Connectivity (X15 and X42)
The phyBOARD-Wega provides one USB Host and one USB OTG interface.
USB0 is accessible at connector X42 (USB Micro-AB) located at the back side of the phyBOARDWega. It is configured as USB OTG. USB OTG devices are capable to initiate a session, control the
connection and exchange host and peripheral roles between each other. This interface is compliant
with USB revision 2.0.
USB1 is accessible on the top at connector X15 (USB Standard-A) and is configured as USB Host.
Components supporting the USB Interfaces
LED D8 displays the status of USB0_VBUS and LED D7 the status of USB1_VBUS. For later
expansion boards the USB1 interface can be routed to the expansion connector (X69) by populating
J72 and J73 (2+3).
5.7 Audio Interface (X55 andX73)
The audio interface provides a method of exploring AM335x’s audio capabilities. The phyBOARDWega is populated with an audio codec at U35. The audio codec is connected to the AM335x’s
McASP0 interface to support stereo line input and stereo line output at connector X73. In addition to
that the phyBOARD-Wega has one direct mono speaker output (2 × 1 W) at the Molex connector X55.
X55: Speaker
Audio Interfaces at Connectors X55 and X73
© PHYTEC Embedded Pvt. Ltd. 2014
X73:LINE IN LINEOUT
19
Pin assignment at X73
Pin
Signal
Pin
Signal
1
LINE_IN_L
2
LINE_IN_R
3
AGND
4
AGND
5
LINE_OUT_L
6
LINE_OUT_R
Pin assignment at X55
Pin
Signal
Description
1
SPOP
Class-D positive differential output
2
SPOM
Class-D negative differential output
For additional audio applications the McASP0 interface of the AM335x including the signals
X_MCASP0_AHCLKX, X_I2S_CLK, X_I2S_FRM, X_I2S_ADC and X_I2S_DAC are routed to the
A/V connector.
5.8 CAN Connectivity
The CAN1 interface of the phyBOARD-Wega-AM335x is accessible at connector X65
(2×5 2.54 mm pin header).
Jumper JP3 can be installed to add a 120 Ohm termination resistor across the CAN data lines if
needed.
Components supporting the CAN Interface
© PHYTEC Embedded Pvt. Ltd. 2014
20
Below table shows the signal mapping of the CAN1 signals at connector X65.
Pin
Signal
Pin
Signal
1
NC
2
GND
3
X_CANL
4
X_CANH
5
GND
6
NC
7
NC
8
NC
9
Shield
10
NC
Pin Assignment of CAN Connector X65
An adapter cable is included in the phyBOARD-Wega-Am335x Kit to facilitate the use of the
CAN interface. The following figure shows the signal mapping of the adapter.
5.9 Secure Digital Memory Card/ Multimedia Card (X11)
SD / MM Card interface at connector X11
he phyBOARD-Wega provides a standard micro SDHC card slot at X11 for connection to
SD/MMC interface cards. It allows easy and convenient connection to peripheral devices like SD and MMC cards. Power to the SD interface is supplied by inserting the appropriate card into the
SD/MMC connector, who features a card detection, a lock mechanism and a smooth extraction
function by Push-in /-out of card.
“The AM335x processor on the phyBOARD-Wega can BOOT from this interface.”
© PHYTEC Embedded Pvt. Ltd. 2014
21
5.10 I2C Connectivity
The I2C interface of the AM335x is available at different connectors on the phyBOARD Wega. The following table provides a list of the connectors and pins with I2C connectivity.
Connector
Location
Expansion connector X69
pin 11 (I2C_SDA);
pin 13 (I2C_SCL)
A/V connector X71
pin 16 (I2C_SDA);
pin 15 (I2C_SCL)
To avoid any conflicts when connecting external I2C devices to the phyBOARD-Wega the
addresses o f the on-board I2C devices must be considered.
5.11 System Reset Button (S2):
"The phyBOARD-Wega is equipped with a system reset button at S2. Pressing this button will
toggle the X_nRESET_IN pin of the phyCORE SOM low, causing the module to reset. Additionally, a
reset is generated on nRESET_OUT to reset peripherals."
System Reset Button S2
© PHYTEC Embedded Pvt. Ltd. 2014
22
6. System Level Hardware Information
6.1 Audio/Video connectors (X70 & X71)
The Audio/Video (A/V) connectors X70 and 71 provide an easy way to add typical A/V functions and
features to the phyBOARD-Wega. Standard interfaces such as parallel display, I²S and I²C as well
as different supply voltages are available at the two A/V female dual entry connectors. Special
feature of these connectors are their connectivity from the bottom or the top. The pin out of the A/V
connectors is shown in below tables.
X70 Connector Details:
Pin No
Signal Name
1
GND
2
X_LCD_D21
3
X_LCD_D18
4
X_LCD_D16
5
X_LCD_D0
6
GND
7
X_LCD_D1
8
X_LCD_D2
9
X_LCD_D3
10
X_LCD_D4
11
GND
12
X_LCD_D22
13
X_LCD_D19
14
X_LCD_D5
15
X_LCD_D6
16
GND
17
X_LCD_D7
18
X_LCD_D8
19
X_LCD_D9
20
X_LCD_D10
21
GND
22
X_LCD_D23
23
X_LCD_D20
24
X_LCD_D17
25
X_LCD_D11
26
GND
27
X_LCD_D12
28
X_LCD_D13
29
X_LCD_D14
30
X_LCD_D15
© PHYTEC Embedded Pvt. Ltd. 2014
Description
Ground
LCD D21
LCD D18
LCD D16
LCD D0
Ground
LCD D1
LCD D2
LCD D3
LCD D4
Ground
LCD D22
LCD D19
LCD D5
LCD D6
Ground
LCD D7
LCD D8
LCD D9
LCD D10
Ground
LCD D23
LCD D20
X_LCD_D17
LCD D11
Ground
LCD D12
LCD D13
LCD D14
LCD D15
Pin(Ball-no)of
Processor
T11
R12
U13
R1
R2
R3
R4
T1
T10
T12
T2
T3
T4
U1
U2
U3
U10
U12
V13
U4
V2
V3
V4
T5
23
31
32
33
GND
X_LCD_PCLK
X_LCD_BIAS_EN
Ground
LCD Pixel Clock
LCD BIAS
34
X_LCD_HSYNC
35
X_LCD_VSYNC
36
37
38
GND
GND
X_PWM1_OUT
39
VCC_BL
40
VCC5V
LCD Horizontal
Synchronisation
LCD Vertical
Synchronisation
Ground
Ground
Pulse Wide
Modulation
Backlight power
supply
5V powersupply
V5
R6
R5
U5
C15
X71 Connector Details:
Pin No
Signal Name
1
2
3
X_I2S_CLK
X_I2S_FRM
X_I2S_ADC
4
X_I2S_DAC
5
X_AV_INT_GPIO1_3
0
X_MCASP0_AHCLK
X
GND
nRESET_OUT
TS_X+
TS_XTS_Y+
TS_YVCC3V3
GND
X_I2C0_SCL
X_I2C0_SDA
6
7
8
9
10
11
12
13
14
15
16
© PHYTEC Embedded Pvt. Ltd. 2014
Description
I²S Clock
I²S Frame
I²S Analog-Digital
converter
(microphone)
I²S Digital-Analog
converter (speaker)
A/V interrupt;
GPIO1_30
McASP0 high
frequency clock
Ground
Reset
Touch X+
Touch XTouch Y+
Touch Y3.3 V power supply
Ground
I²C Clock
I²C Data
Pin(Ball-no)of
Processor
A13
B13
D12
D13
U9
A14
A10
B6
C7
B7
A7
C16
C17
24
7. Expansion connector:
The expansion connector X69 provides an easy way to add other functions and features to the
phyBOARD-Wega. Standard interfaces such as UART, SPI and I2C as well as different supply
voltages and some GPIOs are available at the expansion female connector. The pinout of the
expansion connector is shown in S e c u r e Digital Memory Card/ MultiMedia Card (X11).
Pin No
Signal Name
1
2
3
4
5
6
VCC3V3
VCC5V
VDIG1_1P8V
GND
X_SPI0_CS0
X_SPI0_MOSI
7
X_SPI0_MISO
8
9
10
X_SPI0_CLK
GND
X_UART0_RXD
11
12
X_I2C0_SDA
X_UART0_TXD
13
14
15
X_I2C0_SCL
GND
X_JTAG_TMS
16
17
18
X_nJTAG_TRST
X_JTAG_TDI
X_JTAG_TDO
19
20
GND
X_JTAG_TCK
21
22
23
24
25
26
27
28
X_USB1_DP_EXP
X_USB1_DM_EXP
nRESET_OUT
GND
X_MMC2_CMD
X_MMC2_DAT0
X_MMC2_CLK
X_MMC2_DAT1
© PHYTEC Embedded Pvt. Ltd. 2014
Description
3.3 V power supply
5 V power supply
1.8 V power supply
Ground
SPI 0 chip select 0
SPI 0 master output/slave
input
SPI 0 master input/slave
output
SPI 0 clock output
Ground
UART 0 receive data
(standard debug interface)
I²C 0 Data
UART 0 transmit data
(standard debug interface)
I²C 0 Clock
Ground
JTAG Chain Test Mode
Select signal
JTAG Chain Test Reset
JTAG Chain Test Data Input
JTAG Chain Test Data
Output
Ground
JTAG Chain Test Clock
signal
USB1 data plus
USB1 data minus
Reset
Ground
MMC command
MMC data 0
MMC clock
MMC data 1
Pin of Processor
A16
B17
B16
A17
E15
C17
E16
C16
C11
B10
B11
A11
A12
R17
R18
A10
J16
J17
L15
J18
25
29
30
31
32
33
34
35
36
37
38
39
40
41
42
GND
X_MMC2_DAT2
X_UART2_RX_GPIO3
_9
X_MMC2_DAT3
X_UART2_TX_GPIO3
_10
GND
X_UART3_RX_GPIO2
_18
X_UART3_TX_GPIO2
_19
X_INTR1_GPIO0_20
X_GPIO0_7
X_AM335_EXT_WAK
EUP
X_INT_RTCn
GND
X_GPIO3_7
Ground
MMC data 2
UART 2 receive data;
GPIO3_19
MMC data 3
UART 2 transmit data;
GPIO3_10
Ground
UART 3 receive data;
GPIO2_18
UART 3 transmit data;
GPIO2_19
Interrupt 1; GPIO0_20
GPIO0_7
External wakeup
Interrupt from the RTC
Ground
GPIO3_7;
K15
A17
H16
B17
C15
C18
D14
C18
C5
C14
Caution: [Also connected to powerfail
signal through R415!]
43
44
nRESET_IN
X_GPIO3_8
Push-button reset
GPIO 3_8;
A10
B14
Caution: [Also connected to
power-down circuit through R412!]
45
X_AM335_NMIn
46
47
48
49
50
51
52
53
54
55
56
57
GND
X_AIN4
X_AIN5
X_AIN6
X_AIN7
GND
X_USB1_DRVVBUS
X_USB1_ID
USB1_VBUS
X_USB1_CE
GND
X_PMIC_POWER_EN
58
58
X_PB_POWER
© PHYTEC Embedded Pvt. Ltd. 2014
AM335x non-maskable
interrupt
Ground
Analog input 4
Analog input 5
Analog input 6
Analog input 7
Ground
USB 1 bus control output
USB 1 port identification
USB 1 bus voltage
USB 1 charger enable
Ground
Enable Power Management
IC for AM335x
Power On for Power
Management IC for
AM335x
B18
C8
B8
A8
C9
F15
P17
T18
P18
26
59
60
GND
VCC5V_IN
Ground
5 V input supply voltage
8. Technical Specifications
Table-5. Technical Specifications
Dimensions
Weight
Storage Temperature
Operating Temperature
Humidity
Operating Voltage
Power Consumption
100 x 72mm
64.2g / 2.26oz typ.
-40 °C to +125 °C
-40°C to + 85 °C (Industrial)
95% r.F. not condensed
+5VDC +- 5%
2.05W typ.; Linux booted from Micro SD card,
running ping test
9. Revision History
Table-6 Revision History
Date
Version Number
08/11/2013
Hardware Manual
PBA-CD-02
© PHYTEC Embedded Pvt. Ltd. 2014
Changes in this Manual
Preliminary documentation.
Describes the phyBOARD-WEGAAM335x With phyCORE-AM335x
SOM.
27
10. PLACMENT DIAGRAMS
Figure 16. Placement Diagram of phyBOARD-WEGA-AM335x
Top Placement Diagram of phyBOARD-WEGA-AM335x
© PHYTEC Embedded Pvt. Ltd. 2014
28
Bottom Placement Diagram of phyBOARD-WEGA-AM335x
Note:
If you want more information about mechanical dimensions please visit the this FTP link:
ftp://ftp.phytec.de/pub/Products/phyBOARD-WEGA-AM335x/Layout/PL1397_0/
© PHYTEC Embedded Pvt. Ltd. 2014
29
Get the dialog going ...
... and stay in touch
INDIA
PHYTEC Embedded Pvt.Ltd.
#16/9C, 3rd Floor, 3rd Main
8th Block, Opp. Police Station
Kormangala, Bangalore-560095
Tel.: +91-80-40867046-49
www.phytec.in
Germany
PHYTEC Messtechnik GmbH
Robert-Koch-Straße 39
D-55129 Mainz
Tel.: +49 6131 9221-32
Fax: +49 6131 9221-33
www.phytec.de
www.phytec.eu
America
PHYTEC America LLC
203 Parfitt Way SW, Suite G100
Bainbridge Island, WA 98110
Tel.: +1 206 780-9047
Fax: +1 206 780-9135
www.phytec.com
France
PHYTEC France SARL
17, place St. Etienne
F-72140 Sillé le Guillaume
Tel.: +33 2 43 29 22 33
© PHYTEC Embedded Pvt. Ltd. 2014
30

Similar documents

×

Report this document