System Configurator Manual August 2014, Copyright © Webland AG 2014

Document technical information

Format pdf
Size 3.5 MB
First found Jun 9, 2017

Document content analysis

Language
English
Type
not defined
Concepts
no text concepts found

Persons

Organizations

Places

Transcript

System Configurator
Manual
August 2014, Copyright © Webland AG 2014
Manual
Table of Contents
Home
Home
Manage Accounts
Change Billing Address
Change Customer Password
Change Account(s)
Send Authenticated Message
Login
Login
Customer-Login
Domain-Login
E-Mail-Login
Administration
General
Administration
Manage Accounts
Select Account
Change Accounts
Upgrade (Change to a Higher Level Account)
Downgrade (Change to a Lower Level Account)
Send Authenticated Message
Change Billing Address
Change Customer-Password
Customer Number
New Password
Manual
Confirm New Password
Domain Settings
General
Settings
FTP/FP/WebDav User
Status FTP-User
Set up additional FTP-User
Edit FTP-User
Delete FTP-User
Security Settings
Domain-Mappings
Status Domain-Mappings
Set up new Domain-Mapping
Edit Domain-Mapping
Delete Domain-Mapping
HTTP Error Reports
You can make Changes in the Following Error-Codes
Editing HTTP Error Messages
Explanations of the Error-Codes
File Access permissions
Authorisation-Levels
Legacy Access permissions
Change Access permissions
Protect Directory
Directory Status
Protect Directory
User Management
Manual
Remove Directory-Protection
Programming ASP.NET
Versions of ASP.NET
Status of virtual Directories
Inheriting the ASP.NET Version used
Changing the ASP.NET Version(s) used
Accessing Webpages in SSL Mode
Recycling the Application Pool
Programming PHP
PHP Versions
Status of virtual Directories
Inheriting the PHP Version used
Changing the PHP Version(s) used
Calling up webpages in SSL Mode
Secure Socket Layer (SSL)
SSL URL
Calling up Webpages in SSL Mode
Example
Adjusting the SSL URL to the ASP.Net or PHP Version in use
URL Rewriting
ISAPI Rewrite
Cron-Jobs
Status Cron-Jobs
Set-up New Cron-Job
Edit Cron-Job
Delete Cron-Job
Hosting Statistics
Manual
User-Data
Change Password for Hosting Statistics
Access to Log Files
DNS Zone File
Edit Domain
Edit Sub-domain
Add Sub-domain
Delete Sub-domain
Databases
General
MySQL
Status MySQL Databases
Add MySQL Database
Delete MySQL Database
Change Password for a MySQL Database
Access Data
phpMyAdmin
MS Access
Status MS Access Databases
Add MS Access Database
Delete MS Access Database
Path Information and DataSourceName(DSN)
MS SQL
Status MSSQL Databases
Add MSSQL Database
Access Data
Database Backup / Restore
Manual
Change Password for a MSSQL Database
Applications
General
WebsiteBuilder
General Information about WebsiteBuilder
Activate/Order WebsiteBuilder
Additional Settings for Using WebsiteBuilder
Creating/Editing Websites with WebsiteBuilder
WebsiteBuilder Editions / Versions
Delete/Cancel WebsiteBuilder
Typo3
Install Typo3
Typo3 Basis-Configuration
Repair Typo3 (Reset permissions)
Delete Typo3
Joomla
Install Joomla
Joomla Basic-Configuration
Operate Joomla with "Search Engine Friendly URL's"
Repair Joomla (Reset permissions)
Delete Joomla
DotNetNuke
Install DotNetNuke
DotNetNuke Basic-Configuration
Repair DotNetNuke (Reset permissions)
Delete DotNetNuke
os Commerce
Manual
Install os Commerce
os Commerce Basic-Configuration
Repair os Commerce (Reset permissions)
Delete os Commerce
Guestbook
Install Guestbook
Guestbook Basic-Configuration
Repair Guestbook (Reset permissions)
Delete Guestbook
Wordpress - Weblog
Install WordPress-Weblog
WordPress-Weblog Configuration
Repair WordPress-Weblog (Reset permissions)
Delete WordPress-Weblog
phpBB - Forum
Install phpBB
phpBB Basic-Configuration
Repair phpBB (Reset permissions)
Delete phpBB
DokuWiki - Wiki
Install DokuWiki
DokuWiki Basic-Configuration
Repair DokuWiki (Reset permissions)
Delete DokuWiki
E-Mail / Xchange Administration
General
Additional Account Settings
Manual
E-Mail / Xchange Accounts
Status MailServer
Add E-Mail / Xchange Account
Display/Change E-Mail / Xchange Account Type
Show/Change E-Mail / Xchange Account Properties
Delete E-Mail / Xchange Account
Distributor-Lists
Status Distributor-Lists
Show Distributor-Lists
Add Distributor-Lists
Change Distributor-Lists
Delete Distributor-Lists
Send E-Mail to Distributor-List
E-Mail Domain-Aliases
Status E-Mail Domain-Aliases
Set-up New E-Mail Domain-Alias
Delete E-Mail Domain-Alias
Anti-Spam Settings
Anti-Spam Function
Greylisting-Function
Own Server Rules
Exchange Server Settings
MS Exchange Server with Static IP-Address - Sending Mail over the Webland Mailserver
MS Exchange Server with Static IP-Address – Sending Mail Directly over this Server
MS Exchange Server without Static IP-Address – Sending Mail over Webland Mailserver
MS Exchange Server without Static IP-Address - Sending Mail Directly over this Server
Mailing-Lists
Manual
Status Mailing-Lists
Show Mailing-Lists
Add Mailing-Lists
Change Mailing-Lists
Delete Mailing-Lists
Send E-Mail to Mailing-list and/or its Recipients
Mailing-Lists Pro
Status Mailing-Lists Pro
Show Mailing-Lists Pro
Change/Edit Mailing-Lists Pro
Send E-Mail to Mailing-List Pro and/or its Recipients
Appendix
Login Integration
Login Integration into Your Own Webpage
Customer-Login
Domain-Login
Login-Masks / Code
Graphical input mask "Customer-Login"
Text-based input mask "Customer-Login"
Graphical input mask "Domain-Login"
Text-based input mask "Domain-Login"
Manual
Home
Home
You are on the starting page of the System Configurator.
You can select from the following menu options:
Manage Accounts
Your unique, comprehensive tool for configuring your hosting subscriptions.
You can configure the settings for a domain, databases, CMS and shop systems and other tools here.
Change Billing Address
Check your billing address data and make any necessary corrections/changes.
Change Customer Password
If you want to change your customer passwords, you can do this here.
Change Account(s)
Here you can change/upgrade your account to a higher level account.
Send Authenticated Message
The form can for example be used for a request to change your hosting accounts or for support questions.
10
Manual
Login
Login
There are 3 variants available for Login for the System Configurator:
• Customer–Login with customer number and customer–password
• Domain-Login with domain name and domain-password
• E-mail-Login with e-mail addresses and e-mail-passwords
Customer-Login
In customer–Login you login with your personal customer number and the matching customer-password into
the system configurator.
With this Login you can configure all of your hostings at one time and manage your personal customer data.
Should you have misplaced your customer number or the password, just contact our support department by email only, please (we will not give out data by telephone). We can only send out the data to the stored
customer data (per e-mail or fax) for security evidence.
Domain-Login
In the domain-Login you can login with a domain name and the matching FTP-password.
With this Login you can only make changes to this domain and the customer data cannot be administrated.
Neither the other domain names nor the customer names are visible with this Login.
Should you have misplaced your customer number or the password, just contact our support department by email only, please (we will not give out data by telephone). We can only send out the data to the stored
customer data (per e-mail or fax) for security evidence.
E-Mail-Login
In the e-mail-Login you login with the e-mail-address and the matching password (e-mail addresses must have
administrator permissions).
Using this Login your can only configure the e-mail addresses belonging to this domain.
Neither other domain names nor the customer datas can be seen with this Login.
Should you have misplaced your customer number or the password, just contact our support department by email only, please (we will not give out data by telephone). We can only send out the data to the stored
customer data (per e-mail or fax) for security evidence.
11
Manual
Administration
General
Administration
You are on the start page for the System Configurator.
You can select from the following menu options:
Manage Accounts
The unique, comprehensive tool with which you can configure your hosting subscriptions.
You can configure the settings for a domain (e.g. domain-mapping, file access permissions, etc.), databases,
CMS-and shop systems and other tools.
Change Accounts
Here you can change/upgrade your existing account to a higher level account.
Send Authenticated Message
The form can be used for example for modifications to your hosting accounts or for support queries.
Change Billing Address
Review your billing address data and make any necessary corrections/changes.
Change Customer Password
If you would like to change your customer –password, you can do that here.
Just click on the corresponding option.
12
Manual
Manage Accounts
The unique, comprehensive tool with which you can configure your hosting subscriptions.
You can configure the settings for a domain (e.g. domain-mapping, file access permissions, etc.), databases,
CMS-and shop systems and other tools and of course the e-mail functionalities.
You are on the overview page.
You see a tabular listing of your established accounts.
Select Account
Select the desired hosting account based on the domain name and click on "Configuration".
In the search field you can search directly by domain name. Just enter the first letter(s) of the domain name
you are searching for and click on "Search".
By clicking on one of the headings, Domain Name, User Name, Server, Account or Status, you can sort by these
categories:
Domain name: Here you find all hosted domain names (only domains with a virtual server, domain mappings
are not shown).
User name: The user names belonging to a domain are displayed (passwords are not displayed for security
reasons).
Server: Web or mail server on which a hosting is operated (important for maintenance work and TroubleTicketidentification).
Account: The hosting account booked for a domain is displayed.
Status: Active means that a hosting has not been cancelled. If a date is indicated, then it is the cancellation
date for that hosting (only future dates will be stated).
13
Manual
Change Accounts
Upgrade (Change to a Higher Level Account)
Here you can change/upgrade your existing account to a higher level account.
The upgrade takes effect immediately after you send the account and you can immediately use all newly added
features.
Select the desired hosting account based on the comain name and click on "Upgrade".
Select the desired new account here.
Confirm that you accept our terms and conditions by clicking on the matching field.
Then select the "order" button.
Downgrade (Change to a Lower Level Account)
Downgrades cannot be completed in the System Configurator.
For this you need to contact our Administration-Department.
Use the form on the page "Send Authenticated Message".
14
Manual
Send Authenticated Message
With this form you can send an authenticated message to Webland.
The form can be used, for example, for change requests concerning your hosting accounts or for support
queries.
(Please have a look at our extensive "Support-Webpage", to find any matching entry in our online help.)
You must enter your domain name in the field domain name so that we can promptly process your message.
Describe your concern in as much detail as possible in the field "Message".
Then select the button "Send".
Change Billing Address
You can change any information about your billing address here.
Press the button "Save Information" in order to save the updated data.
Note:
This is only for the billing address.
If you want to make changes to the ADSL connections, you must contact our Support-Department
([email protected]) !
Changes of billing addresses for domain name registrations, must be completed using the "Domain
Administrations-Tool" Domain AdministrationTool.
Change Customer-Password
If you want to change your customer–password, you can do this here.
Note: If you have forgotten your customer–password you can reset it here.
Customer Number
Here your personal customer-number is displayed.
Note: The customer-number cannot be changed for administrative reasons.
New Password
Enter your new password.
Note: The new password must be at least 6 characters long and may not include any blank spaces.
Confirm New Password
Repeat the entry for your new password given above.
Now select the button "Change Password", in order to save the new password.
15
Manual
Domain Settings
General
Settings
You are on the start page for the System Configurators for Settings for your hosting account (Domain).
You have the following options:
• Managing FTP / FrontPage users (change, delete, new)
• Set-up/edit domain-mappings
• Set-up/edit HTTP error reports
• Manage file access permissions
• Protect directories /user management
• Set programming - ASP.NET and PHP versions
• Secure Socket Layer – Here you find your information for SSL-encryption
• URL Rewriting
• Manage Cron-Jobs (time-controlled recurring tasks)
• Domain statistics
Select the corresponding option.
FTP/FP/WebDav User
Here you can view the status of your FTP-users and set-up, edit, activate, de-activate or delete
FTP-users.
The standard-user also has, along with access via FTP, access via WebDav and, if selected during the initial
hosting order, access via FrontPage (FP).
In the following you can definite special security settings for every FTP-users.
It is therefore possible to allow access to your FTP-server only from certain IP-addresses, only make selected
directories available to FTP-users and set the access type to "read only" (e.g. for downloads) or "read and
write".
FTPS - FTP over SSL data transfer is also supported.
16
Manual
Status FTP-User
Here you are shown how many FTP-users in total are available to you (with the hosting account subscribed to),
how many are already set up and how many are still available:
Should there be no more FTP-users available, you have 2 options:
1. Delete an FTP-user that is no longer needed.
2. Request an "Upgrade" to a higher level hosting account using the "Send Authenticated Message" form->
"Send Authenticated Message".
The set-up FTP users are displayed in the tree structure.
You can also see whether it is a standard user, an active or inactive added FTP-user:
To view the status of a user, click on the user:
17
Manual
The information about your FTP-user will be displayed.
Set up additional FTP-User
In order to set up a new FTP-user, click on the "plus sign" by "Add FTP-User":
18
Manual
Now enter the desired user name under FTP-user name. Define a password and confirm it.
Enter the desired FTP-pad. You can also enter a sub-directory to the extent that the user should not have
access to the entire master directory.
Activate the control box "FTP-User active ".
Now define the "permissions". If the user is to have "Read and Write"permissions, activate "Read and Write"; if
read-only permissions are to be assigned, activate "Read Only".
You have the option of restricting access to certain IP-addresses and thus increase the security even more.
Note that this is only possible if you have a static IP address or if you connect with the server using an xDSLconnection from Webland.
More info under "Security Settings".
Then select "Add FTP-User".
19
Manual
You will then receive confirmation that the new FTP-user has been saved.
You can use it immediately.
Edit FTP-User
You can edit all configured FTP-users at any time.
• Edit the Standard User
• Edit an additional FTP User
Edit the Standard User
Click on the "Plus-Sign" next to the FTP-user you want to edit and select "Edit":
The standard-user has, along with access via FTP, access via WebDAV and, if selected in the original hosting
order, access via FrontPage (FP).
Access via FTP and WebDAV/FrontPage can be separately activated/deactivated.
For security reasons, we recommend that you only activate those types of access that you really need.
20
Manual
Make any desired changes and select "Save Changes".
You will receive confirmation of the changes you completed.
21
Manual
Edit an additional FTP User
Click on the "Plus-Sign" next to the FTP-user you want to edit and select "Edit":
Now make the desired changes and select "Save Changes".
22
Manual
You receive a confirmation of the changes you made.
Delete FTP-User
Click on the "Plus-Sign" next to the FTP-user you want to delete and select "Delete".
Note: The standard-user can only be edited, but not deleted.
If you are sure that you want to delete this FTP-user, then click on the button "Delete FTP-User".
You will receive a confirmation of the deletion.
23
Manual
Security Settings
You can adjust various settings, in order to make your server even more secure:
FTP-User name / Password
Select an FTP-user name and a password that is as secure as possible:
FTP-Path
Assign a new FTP-user (if possible) only acces to a single directory (path):
Access permissions
Assign the FTP-user only the necessary access permissions:
24
Manual
Access Restricted to Certain IP Addresses
If possible, restrict access to specific IP-addresses.
Please note that it is only possible if you have a static IP address or if you connect with the server using an
xDSL-connection from webland.
With an xDSL-connection from Webland you can also restrict access without a static IP-address.
To do this, enter the data shown below exactly in this format:
FTPS - FTP over SSL
Secure data-transfer over the protocol FTPS - FTP over SSL is likewise supported by our servers.
Make the settings according to the instructions of your FTP-programme.
Example of the programme Filezilla:
25
Manual
Domain-Mappings
A Domain-Mapping enables you to make an additional domain name active, without operating your own server.
Note: Only the web-functionalities are "mapped". There are therefore no proper domain statistics or e-mail
addresses available!
Status Domain-Mappings
Here the number of mappings with the total subscribed hosting accounts are shown, showing how many are
already set up and how many are still available:
If a mapping is no longer available there are 3 options:
1. Delete any mappings that are no longer necessary.
2. Apply for an "Upgrade" to a higher level hosting account with our Support-Department.
3. Apply for one or more new domain mapping(s) (costs) without Support-Department.
The domain mappings that have been set up are displayed in the tree structure. In illustration 1, 2 mappings
are (still) not set up already:
26
Manual
Set up new Domain-Mapping
In order to set up a new domain-mapping, click on the "Plus-Sign" at "Add Mapping":
You have 4 Types of Domain-Mappings available:
New Domain Name or Sub domian (Mapping) refers to the Start Page (Root) of your Main Domain Name.
Enter the new domain name and leave the field "Targetl-URL" blank:
Click on "Add Mapping". The new domain-mapping is now set up (changes are possible at any time).
27
Manual
New Domainname or Sub domain (Mapping) refers to a Subdirectory of your Main Domain
Enter the new domain name and the desired sub-directory in the field "Target-URL":
Click on "Add Mapping". The new domain-mapping is now set up on the desired sub-directory (changes are
possible at any time)..
New Domain Name or Sub-domain (Mapping) refers to an External Domain Name/ URL.
Enter the new domain name and the target URL in the field "target URL", inlcuding:
Click on "Add Mapping". The new domain-mapping will now be set up on the desired URL (changes are possible
at any time).
You can now activate the domain name at the responsible registration office.
28
Manual
The name server you need to store is:
ns1.webland.ch;ns2.webland.ch;ns3.webland.ch;ns4.webland.ch
Domain Name itself refers to a Sub Directory
Enter the domain name itself and the desired sub-directory in the field "Target-URL":
29
Manual
Edit Domain-Mapping
All mappings set up can be edited at any time.
It is also possible to forward the main domain according to the types of mapping described. This is for example
advantageous for certain CMS-systems.
Attention: Through manipulation of the main domain you endanger the correct function of your website. You
only make changes if you are sure about them!
Click on the "Plus-Sign" next to the mapping you want to edit (or the main domain) and select "Edit":
Make the changes you want to make and select "Save Changes".
30
Manual
Delete Domain-Mapping
Click on the "Plus-Sign" next to the mapping you want to delete and select "Delete":
If you are certain that you want to delete the mapping, then click on the "Delete Mapping" button.
31
Manual
HTTP Error Reports
If users attempt to request content form a server with Internet Information Services (IIS) over HTTP, IIS will
send back a number code which will then indicate the status of the request.
This status code is recorded in the IIS-Protocol file and is displayed to the use even in a web browser.
You can determine whether a specific request was successful or not from the status code.
Additionally, it can state the exact reason for a failed request.
In system configurator, we make it possible for you to define your own error reports instead of the standard
reports.
You can therefore display a self-created website to the user and/or re-route it to a self-defined website.
You can make Changes in the Following Error-Codes
400 - Bad request
404 - Not found
405 - Method not allowed
414 - Request-URI (URL) too long
Editing HTTP Error Messages
For example, you would like to show instead of the "404" Standard-Error Message, the website error.htm, which
is in the directory /error:
Click on the "Plus-Sign" next to the "404" error report and select "Edit":
32
Manual
Define the directory and the file name "Own Error Message"and click on "Save Changes":
You now see the new settings under the matching error message:
If you would like to re-set one or all error reports to the standard-settings, then select the corresponding error
message and click on "Return to Standard-Settings" and/or select "Re-set All HTTP Errors to StandardSettings":
33
Manual
Explanations of the Error-Codes
400 - Bad request:
The request contains an syntax error. The server cannot process the request for that reason.
404 - Not found:
The requested URL does not exist. In practice this is one of the most frequent cases. It alwasy occurs when a
reference leads to an address that does not or no longer exists on the server or if the user attempts to call up
an address by manually typing it into the address line of a browser and the address he/she types does not
exist.
405 - Method not allowed:
The transfer metho is not allowed on the server.
414 - Request-URI (URL) too long:
The server cannot process the request because the address requested has too many characters. The requested
data are not transferred for that reason.
Note: You can find additional information about the topic in the Microsoft Knowledge-Base under ther IIS status
codes.
34
Manual
File Access permissions
Here you can define which permissions the IUSR, that is a visitor to your website may/should have.
Authorisation-Levels
IUSR has "Read-permissions"
Basically the IUSR only need read rights, so that he can display the website on his browser/computer.
Directories with this level of permissions can be recognised by their "blue" label:
IUSR has "Read and Write permissions"
However, for certain directories it can be that the IUSR needs more permissions, meaning read and write
permissions.
This is the case, for example, in guest books or forums, where the IUSR can not only display data but can even
write data
(e.g. in the guest book).
Directories with this level of authorisation can be recognised by their "black" label:
IUSR has "No permissions"
long with the the authorisation levels it is also possible to revoke all rights from the IUSR, so that when you call
up the corresponding webiste you will be asked for a user name and password.
In this case you only have access to this folder with your administrator-user name. This is sensible if you do not
want to leave certain data publicly accessible.
Directories with this level of authorisation are recognised by their "red" label:
"Directory Protection –Only Authorised Users have Access"
Along with the described levels of access permissions, there is also the option of making individual directories
accessible only to a specific circle of users (read permissions).
In this case a so-called protected directory must be created with its own user names and passwords.
A directory of this kind is set up using the menu option "Protect Directory".
35
Manual
Legacy Access permissions
Access permissions can be assigned at the level of the entire domain, that is the root directory (Root), and/or
at the level of individual directories.
The assignment of rights functions as usual according to the hierarchical principle.
This means that if permissions are assigned, they are inherited by all of the directories and files "below" them
(see example).
When assigning permissions always with the greatest caution since otherwise functionalities on your website
can be restricted!
Assign the authorisation level "IUSR has Read and Write permissions" for security reasons only if this is really
necessary!
Change Access permissions
In this example we explain how you switch the permissions for the directories "directory1" from "Read
permissions" to "Write-permissions".
For other settings proceed as in the example.
In order to switch the permissions for the directory "directory1" from "Read-permissions" to "Writepermissions", click on the "Plus-Sign" next to the matching directory and select "Set permissions to Write"::
36
Manual
You will now be asked to confirm your changes. To do this, click on the button "Set permissions" or cancel the
procedure by selecting "Cancel".
Your chanes will now be confirmed:
In the overview you can view the changes in the new display of a directory with a black display:
The permissions have now been changed to "Write-permissions". All sub-directories (already existing ones and
those coming later) in "directory1" now have this level of authorisation!
37
Manual
Protect Directory
Here you can protect individual directories and make access possible for these selected users.
With user management you can define which users have access to a protected directory (with user name and
password ).
Directory Status
You can see whether a directory is protected or not can be seen in the following symbols:
Protect Directory
DDirectory protection can be applied to directories of hierarchy levels 1 to 5.
The directory-protection functions as usual according to the hierarchy principle.
This means that if a directory is protected, then the protection is inherited by all directories and files
"underneath" it.
A protected directory can only be edited on the level at which the protection was originally set up.
To protect a directory, select it by clicking on the "Plus-Sign" along with the matching directory and then select
"Protect Directory".
If the directory has not yet been saved, then select "Create New Sub-Directory":
38
Manual
You will now be asked to enter a username and password for this directory:
Additional users can be added (or removed) at any time by means of the User Management.
After successful set-up you will receive a confirmation message:
You will recognise directory protection by the symbol to the left of the directory:
Only defined the defined user "user 2" can access this directory.
You can find out how to add (or remove) other users under User Management.
39
Manual
User Management
In order to call up user management for a protected directory, select it by clicking on the "Plus-Sign" nest to
the corresponding directory and select "Manage User".
With user management you can add new users to the directory at any time, change the password for existing
users or remove users.
40
Manual
Add User
Select the button "Add" in order to add a new User.
Now enter the username and password for the user you wish to add.
Confirm the entry with the button "Add User":
The newly added User now also has access to this directory.
41
Manual
Change Password for Existing Users
If you would like to change the password for an existing user, please enter the new Password and then select
the button "Change Password":
Remove User
If you would like to revoke a user’s access to the protected directory, you can delete this user.
Select the user you wish to delete and click on the "Delete" button.
42
Manual
You will now be asked a security question to make sure you really want to delete this user.
Select the "Delete User" button.
Remove Directory-Protection
If you want to make a protected directory accessible to every visitor without user name and password agian,
you can remove the directory protection.
In order to remove protection for a directory, click on the "Plus-Sign" nest to the matching directory and select
"Remove Directory Protection".
43
Manual
You will now be asked a security question to make sure that your really want to remove directory protection.
If you later decide that you want to protect a directory again, then de-activate the control box "Delete All
Users".
This means that the defined users will available when you set up directory protection again.
If you would like to delete the users for this directory, activate the control box (normal case).
Note: Only the users for this directory will be deleted, even if these user names are used for directories !
Then select the button "Remove Directory Protection".
44
Manual
Programming ASP.NET
Webland is one of the few providers that makes the ASP.NET programming environment and/or the ASP.NET
Framework available to you free of charge.
Versions of ASP.NET
The ASP.NET Framework is available to you on every virtual server and for every virtual directory in different
versions.
What versions for your web hosting are available, can be found directly in the System Configurator.
You can select the ASP.NET version for your entire virtual server or for a single virtual directory.
Status of virtual Directories
Depending on which account you select, there will be a certain number of "Virtua Applications-Directories" at
your disposal.
Here you will be shown how many virtual directories are available for ASP.NET applications with the total
subscribed hosting accounts, how many are already set up and now many are still avialable.
Should there no longer be a virtual directory available, you will need to request an "Upgrade" to a higher level
hosting account from our Support-Department:
45
Manual
Inheriting the ASP.NET Version used
The use of ASP.NET versions-assignment functions, as usual, on the hierarchical principle (with one exception!).
This means that if the ASP.NET Version is assigned, it is inherited by the directories and files "below" it (see
Changing the ASP.NET Version(s) used).
There is one exception: The ASP.NET Version for a virtual directory that was manually changed by the user once
or several times already will NO LONGER inherit the new version assigned.
Such a virtual directory must be manually changed again!
Changing the ASP.NET Version(s) used
In the overview you will see the ASP.NET Version used for the root directory (Root), as well as for virtual
directories.
In this example, it is Version 2.0/3.5:
46
Manual
If you would like to change the version for the root directory and all virtual directories beneath it to version
4.0/4.5, then click on "Change to ASP.NET Version 4.0/4.5".
This action will change the version of ASP.NET used for the root directory and all virtual directories, with the
exception of the virtual directories which you have already manually edited once.
Make note of the point "Inheriting the ASP.NET Version used" used above:
If you would like to complete the changes only at the level of a virtual directories, then click on the "Plus Sign"
next the specific directory and click on "Change to ASP.NET Version 4.0/4.5" under the directory.
If you are sure that you want to change the version that you use, select "Save Changes":
Proceed the same way if you wish to change from Version 4.0/4.5 to 2.0/3.5.
47
Manual
Accessing Webpages in SSL Mode
If you would like to access your web page in SSL Mode, you can do this following the point " Secure Socket
Layer (SSL)". Here you should make sure that you compare the SSL URL witth the ASP.Net Version used. Mor
under: "Secure Socket Layer (SSL)".
Recycling the Application Pool
Webland Business Hostings have their own application pools and thus own isolated processes. The application
pool can be recycled if necessary. The recycling of the application pool causes all own isolated processes to be
newly launched.
48
Manual
Programming PHP
Webland is one of the few Providers to make the PHP programming environment available to you for every
virtual server in various versions.
PHP Versions
The PHP programming environment is available to you on every virtual server for every virtual directory in
different versions.
What versions for your web hosting are available, can be found directly in the System Configurator.
You can select a version of PHP for your entier virtual server or also for a single virtual directory.
Status of virtual Directories
Depending on the selected account, you have at your disposal a certain number of "virtual application
directories".
Here you see how many virtual directories are available to you for PHP applications with the subscribed total
hosting accounts, how many are already set up and how many are still available.
Should there be no more virtual directory available, then you will need to request an "Upgrade"to a higher level
hosting account from our Support-Department.
49
Manual
Inheriting the PHP Version used
The application assigning the PHP version functions, as usual, on the hierarchical principle (with one
exception!).
This means that once the PHP Version is assigned, it is inherited by all of the directories and files "below" it
(see Changing the PHP Version(s) used).
There is one exception: The PHP Version for a virtual directory which the user has already manually changed
once or several times, will NOT inherit the new version.
A virtual directory of this kind must be changed manually again!
Changing the PHP Version(s) used
In the overview you can see the PHP version used for the root directory (root), as well as for virtual directories.
Versions 5.2 is shown in the example 5.2:
50
Manual
If you would like to change the version for the root directory and all virtual directories below it to Version 5.3,
then click on "Change to PHP Version 5.3".
This action will change the PHP Version used for the root directory and all virtual directories, with the exception
of the virtual directories which you have already manually edited.
Please make note of the point "Inheriting the PHP Version used", used above:
If you would like to make the changes only on the level of a virtual directory, click on the "Plus Sign" next to the
specific directory and click on "Change to PHP Version 5.3" under the directory.
If you are certain that you want to change the version used, then select "Save Changes":
Proceed the same way if you wish to change from version 5.3 to 5.2.
51
Manual
Calling up webpages in SSL Mode
If you would like to call up your web page in SSL Mode, you can do this following the point " Secure Socket
Layer (SSL)".. Hierbei ist zu beachten, dass Sie die SSL URL mit der eingesetzten PHP Version abgleichen.
Mehr dazu unter weiter "Secure Socket Layer (SSL)".
52
Manual
Secure Socket Layer (SSL)
All web pages that are hosted by WEBLAND.CH have the option of being called up over a secure connection
(SSL=Secure Socket Layer). This means that we provide our secure SSL-certificate for your use free of charge
(optionally you can also apply for your own certificate).
SSL URL
The SSL URL for your domain name is displayed in the System Configurator.
Note: This SSL URL applies only for your domain name. For this reason it must be used as shown.
Calling up Webpages in SSL Mode
You can call up your entire domain or just individual webpages in SSL Mode.
Note: In practice it is recommended that you only call up a few selected web pages in SSL Mode (see example).
Example
You operate a small webshop on your domain "ihredomain.ch" in the sub-directory "/shop". Here you use a
form on the page "bestellformular.htm", in which the customer must enter his/her information. You save these
data, e.g. in a MySQL database on our servers.
Now you would like for these data to be transferred securely (that is, encrypted) from the customer’s PC to0
your virtual server.
Instead of using the link as usual like this "http://ihredomain.ch/shop/bestellformular.htm" use the encrypted
URL, that is displayed in the System Configurator for your domain:
The URL above will be displayed in the System Configurator.
Since you are operating your shop in the sub-directory "/shop" and also want to access the order form
"bestellformular.htm", complete this URL as follows:
https://wl15.webland.ch/www992/shop/bestellformular.htm
Your order form now appears in the browser in SSL Mode. You can see this because the browser will show the
lock symbol in the status bar (lower right).
Adjusting the SSL URL to the ASP.Net or PHP Version in use
In order to assure correct access to webpages in SSL Mode, you need to define the ASP.Net or PHP version in
every case. You will find the versions used under programming (in the System Configurator).
Note: Accessing ASP.Net applications in SSL Mode is only possible in the root-directory!
If you would like to access webpages in virtual applications directories in SSL Mode, it is absolutely necessary
that you have your own SSL-certificate.
53
Manual
URL Rewriting
This option should only be used by advanced users!
We expressly ask you not to use these functions if you are not 100% certain what they will do!
Note: If you have already used the components provided in Version 2, then conversion to Version 3 is
necessary.
In this case, please contact us via e-mail to [email protected], so that we can perform the conversion for
you.
ISAPI Rewrite
ISAPI_Rewrite 3 is a high-performance URL-manipulation-engine.
This functions similar to Apache "mod_Rewrite" but i was specially developed by Microsoft for IIS (Internet
Information Server).
ISAPI_Rewrite 3 enables you to use "Search-engine optimised URL's", stop "hotlinking" and make individual
improvements to security .
You can easily edit the file .htaccess in your webroot and/or, if needed, save and edit other .htaccess files in any
and every directory for your webserver analogous to Apache "mod_rewrite".
Save .htaccess File
Enter the path to the desired .htaccess file under "web directory" a (leave empty for root-directory) and then
select "Update".
Note: Should you not have saved the directory yet, you can do this beforehand under the menu option "Protect
Directory".
If there is already a .htaccess file under this directory, you will be shown the content in the field; otherwise the
field will be empty and is available for editing. (see next point: Edit .htaccess File).
Note: The .htaccess file is only saved once the field has been filled in with code. When the file is saved, it is
assigned write permissions for the IUSR so that the scripts can also be written into the file!
54
Manual
Edit .htaccess File
Enter the path to the desired .htaccessf file as described under the point Save .htaccess File and then select:
"Update".
You will now be shown the content of the .htaccess file.
You can now enter/edit your code in the field provided and save it by clicking on "Save":
Delete .htaccess File
UIn order to delete a .htaccess file, enter the path to the .htaccess file under "Web Directory" and click on
"Update".
You will now see the code. Mark all code and delete it.
Now click on "Save". The entire file and not just the code will be deleted.
You can find Applied Examples on the Manufacturer’s Webpage
ISAPI_Rewrite examples
55
Manual
Cron-Jobs
With Cron-Jobs you can have recurring tasks automatically completed at specific times.
Access –for example of a script –is done using the URL (you cannot access via command line on our shared
servers).
You can quite easily define your Cron-Jobs with the System Configurator.
Note: Since access is effected over the URL, the file executing it should be saved in a protected directory since
otherwise unauthorised persons have access.
You can find Help for protected Directories here: Protect Directory
Status Cron-Jobs
Here you see how many Cron-Jobs are available with the subscribed total hosting accounts, how many are
already set-up and how many are still available:
If there are no more Cron-Jobs available, you have 2 options:
1. Delete any Cron-Jobs that are no longer needed.
2. Request an "Upgrade" to a higher level hosting account from our Support-Department..
Set-up New Cron-Job
In order to set up a new Cron-Job, click on the "Plus-Sign" next to "Add Cron-Job":
56
Manual
Now enter the requested information:
A Cron-Job is accessed via the URL.
Enter the "HTTP-Path" to the desired file, e.g: "http://ihredomain.ch/cronjob.php"
Enter the desired "Execution Time".
Select the desired periodicity.
Then select the button "Add Cron-Job".
Note: If you made the directory password protected, the URL must be accessed giving the user namen and
password:
Form: ?http-user=Benutzername&http-passwd=Passwort
Example: http://ihredomain.ch/cronjob.php?http-user=Benutzername&http-passwd=Passwort
The Cron-Job is now set up.
The Cron-Jobs executed are recorded in a log-file.
You can view the logs in the file _CronJob.log, which is automatically saved in your root directory (Root).
57
Manual
Edit Cron-Job
All Cron-Jobs you have set up can be edited at any time.
Click on the "Plus-Sign" next to the Cron-Job you want to edit and select "Edit":
Now make the desired changes and select "Save Changes".
Delete Cron-Job
Click on the "Plus-Sign" next to the Cron-Job you want to delete and select "Delete":
If you are sure that you want to delete the Cron-Job, then click on the button "Delete Mapping".
58
Manual
Hosting Statistics
We provide you with professional statistics server software.
Based on the log-files, the statistics server software supplies authoritative information about the visitors to your
Domain.
User-Data
Select the button "User Data":
Here you will see the user-date for access to your domain-statistics:
URL (Address)
You can access your domain statistics over the displayed URL.
Server ID
Here you can see the server ID that you must enter on login.
Note: The server-ID cannot be changed for administrative reasons.
Username
Here you see your username. It must be entered when you log in.
Note: The username cannot be changed for administrative reasons.
Now press the button the "Change Password", to save the new password.
59
Manual
Use the information above to register for the statistics server:
You can also log in directly.
Select the button "Login":
60
Manual
You can find detailed information about SmartAnalytics in our Manual SmartAnalytics.
61
Manual
Change Password for Hosting Statistics
If you would like to change your access password for domain statistics, you can do this here.
Note: If you forgot your password, you can re-set it here.
Select the button "Change Password":
Username
Here you see your username for domain statistics.
Note: The username cannot be changed for administrative reasons.
New Password
Enter your new password here.
Note: The new password must be at least 6 characters long and may not include any blank spaces.
Confirm New Password
Enter your password a second time here.
Now confirm using the button "Change Password" to save the new password.
62
Manual
Access to Log Files
Proceed as follows in order to access your log-files via FTP:
1
If you do not yet have an FTP-program, download one, like the Filezilla FTP-program.
You can find the program under the following link: Filezilla Download
2
Install the FilleZilla FTP-program according toe the manufacturer’s instructions.
3
Start the Filezilla FTP-program.
4
Under "Server", enter your domain name without www.
(Note: until your domain name has been
activated, use your RealTime host name. You will find this on your access confirmation (e.g.
WL15WWW23.WEBLAND.CH)).
Enter the username accroding to our access confirmation (WebServer Login Data) as you "Username"
(e.g. Www23).
As "Password ", enter the password according to our access confirmation (WebServer Login Data).
Then click on "Connect" to establish the FTP connection.
63
Manual
5
In the left window you see the files of your local directories. On the right side you see the directory
structure of your web server.
Now enter the following in the right window under "Server":
/logfiles
and press the enter button.
6
Now click on the "Plus" sign next to the directory "logfiles" and then select the directory W3SVC??? To
show your logfiles.
Warning! For some online services it can be necessary to set up a proxy.
If it is not possible to make a connection with our server, then contact the hotline of your online service
provider if necessary in order to ask what needs to be done in order to establish an FTP-connection for
uploading files to an external server.
Companies that are directly connected to the internet over a network use so-called firewalls for their own
protection.
These firewalls can be set up so that an FTP connection is not possible or is only possible with very specific
settings.
In this case contact your system manager.
64
Manual
DNS Zone File
Editing DNS zone files without the requisite know-how can lead to capital errors.
For security reasons editing of DNS zone files is only unlocked for well-versed users on request.
To activate it, contact our Support Department using "Send Authenticated Message".
As soon as we have unlocked DNS Zone File Management for you, you will see your Zone File in the following
form:
When you are editing the DNS Zone File via System Configurator, you have the following options:
• Edit domain
• Edit sub-domain
• Add sub-domain
• Delete sub-domain
65
Manual
Edit Domain
Select "Edit Domain", in order to change the A-Record or the MX-Record as well as to record other record types
(e.g. TXT, SPF etc.) for your domain.
Select "Save", to adopt the modifications or "Cancel" if you made no changes or the wrong ones.
66
Manual
Edit Sub-domain
Select "Edit Sub-domain" and the matching sub-domain (e.g. www), to change an already-existing entry.
Here you can now edit the value or a Resource Record with another Record-Type (e.g. CNAME) and remove the
existing value.
Select "Save Changes", in order to adopt the modifications or "Cancel" if you did not make any changes or
made the wrong ones.
67
Manual
Add Sub-domain
Select "Add Sub-domain", in order to record additional sub-domains.
Bestimmen Sie die Subdomain (bspw. cms), den Record Type (bspw. A) und den Wert (Value) (bspw.
92.43.216.115):
Select "Add Sub-domain", in order to adopt the modfiications or "Cancel" if you did not make any entries or
made the wrong ones.
68
Manual
Delete Sub-domain
Select "Delete Sub-domain" and the matching sub-domain (e.g. cms), to remove this entry.
Select "Delete Sub-domain", to confrim the deletion of the selected sub-domain or "Cancel" if you do not want
to complete this action.
69
Manual
Databases
General
You have 3 database –systems at your disposal on our servers:
• My SQL
• MS Access
• MS SQL
In the navigation menu, click on the corresponding database -system to show additional help.
MySQL
MySQL Databases are probably the most widely-used database –system on the web.
Here you can easily add new MySQL databases, edit them or delete them.
Additinoally, you will be shown your access data (server, user name, DNS) and the Login for PHPmyAdmin, and
a password change will be possible.
Status MySQL Databases
Here you see how many MySQL databases are available to you with your total subscribed hosting accounts, how
many are already set-up and how many are still available:
Should there be no more MySQL databases available, you have 2 options:
1. Delete any database you no longer neeed.
(Attention: chtung: All data in the database will be irrevocably deleted in this case)
2. Request an "Upgrade" ot a higher level hosting account from our Support-Department.
70
Manual
Add MySQL Database
To set up a new MySQL database click on the "Plus-Sign" next to "Add MySQL Database":
Now enter a name as well as the password for the new MySQL Database you want to set up.
The database -name may be at most 6 characters long.
The first 5 letters of your domain name and underscore will be automatically inserted in front of the database –
name to aid in identification.
In the example the full database name will therefore be called "ihred_mysql1".
To set-up, click on "Set-up MySQL DB":
The new database is now set up.
71
Manual
Delete MySQL Database
If you would like to delete a MySQL database, click on the "Plus-Sign" next to the matching daatabase and
select "Delete Database".
Attention: All data in the data base will be irrevocably deleted (no restore option)!
Change Password for a MySQL Database
If you would like to change the password for a MySQL database, then click on the "Plus-Sign" next to the
matching database.
Now select "Change Password". Enter the new password and save it with "Change Password".
72
Manual
Access Data
You find the access data for your MySQL database (s) by selecting the "Plus-Sign" next to the newly set-up
database.
By selecting the "Plus-Sign" next to "Access Data" you will see all of the infiromation about the database:
73
Manual
phpMyAdmin
Now click on the "Plus-Sign" next to the desired database.
By selecting the "Plus-Sign" "phpMyAdmin" you see the URL for accessing phpMyAdmin:
74
Manual
MS Access
MS Access databases are probably the most used database systems on the web. Here you can easily add new
MS Access Databases, edit them or delete them.
Additionally, you are shown the access data (server, username, DNS) and the Login to PHPmyAdmin, and
enabled to change passwords.
Status MS Access Databases
Here you are shown how many MS Access databases with your subscribed total hosting accounts, how many
are already set up and how many are still available:
Should there be no more MS Access databases available, there are 2 options:
1. Delete a database you don’t need anymore
(Attention: All data in this database will be irrevocably deleted).
2. Request an "Upgrade" to a higher-level hosting account from our Support-Department..
Add MS Access Database
In order to set up a new MS Access database, click on the "Plus-Sign" next to "Add MS Access Database":
Now enter the file name MS Access database
including .mdb, as well as the path
for the database (if the
directory does not exist, it will be automatically saved).
The DataSourceName will be automatically assigned on the basis of this database name. The first 5 letters of
your domain name and an underscore will be placed in front of it for the sake of identification.
In our example, the DNS is called "ihred_db1".
75
Manual
Click on "Set-up Database":
The new database is now set up.
Delete MS Access Database
If you would like to delete an MS Access Database, click on the "Plus-Sign" nest to the matching database and
select "Delete Database".
Attention: All data in the database will be irrevocably deleted( no restore-option)
76
Manual
Path Information and DataSourceName(DSN)
You find the path information and the DataSourceName (DSN) for your MS Access database by clicking on the
"Plus-Sign" next to the matching MS Access database.
77
Manual
MS SQL
MSSQL databases are very powerful and efficient compared to other databases and are therefore used for
demanding applications.
Status MSSQL Databases
Here you see, among other things, how many (paid) MSSQL databases you have subscribed to:
Should there not be any more MSSQL databases available, you can order an additional database through our
Support-Department.
Add MSSQL Database
To set up a MSSQL database, click on the "Plus-Sign" next to "Add MSSQL Database":
Now enter a name and the password for the new MSSQL database you want to set up.
The first 5 letters of your domain name and an underscore will be placed in front of the database name for the
sake of identification.
In the example the full name of the database is thus "ihred_mssql".
To set it up, just click on "Set-up MSSQL DB":
The new database is now set up.
78
Manual
Access Data
You will find the access data for your MSSQL database (s) by selecting the "Plus-Sign" next to the set-up
database .
By selecting the "Plus-Sign" next to "Access Data" you see all information for the database:
Database Backup / Restore
Datenbank Backup
Select the option "Database Backup", if you want to backup the database "manually" at a specific point in time.
Webland automatically generates a back-up of your database daily.
Both manually generated back-ups as well as those generated by Webland are retained as available for
download for up to 5 days.
It is not a "Database -Archive" !
We recommend that you immediately download the backups that you generate.
79
Manual
Database Restore
Select the option "Database Restore", if you would like to restore the database using a backup.
Select the matching back-up from the selection list in order to restore the database.
In any case you first need to upload the desired back-up from your local computer as .bak (maximum size 250
MB) or .zip-File (maximum size 1000 MB) (see Uploading a Backup-File ).
Attention: In a restore, the current database will be irrevocably overwritten with that of the backup-file!
Uploading a Backup-File
Select the option "Upload a Backup-File", if you would like to restore the database with the content of a backup.
Only valid MS SQL backup-files in .bak (maximum size 250 MB) or .zip-File -format (maximum size 1000 MB)
can be uploaded.
Download of a Backup-File
Select the option "Download a Backup-File", if you would like to download a back-up of a database.
You can also save this file locally in your MS SQL database, simply store it or restore it in the "original
database" at a specific point in time.
Back-ups generated manually or those generated by Webland are retained as available for download for up to 5
days.
This is not a "Database -Archive"!
We recommend that you download your back-ups immediately.
Change Password for a MSSQL Database
If you would like to change the password for a MSSQL database, then click on the "Plus-Sign" next to the
matching database.
Now select "Change Password".
Enter the new password and save it with "Change Password".
80
Manual
Applications
General
The following applications can be installed at the push of a button:
• Typo3 (CMS)
• Joomla (CMS)
• os Commerce (Shop)
• WordPress (Blog)
• Guestbook
Click on the matching applications in the navigation menu for additional help.
81
Manual
WebsiteBuilder
With the Webland WebsiteBuilder, you can easily and quickly create your own professional homepage.
The WebsiteBuilder is available to you in the Limited and in the Full Version.
You can find additional information on our homepage: Webland WebsiteBuilder
General Information about WebsiteBuilder
You can simply activate and order all versions of WebsiteBuilder in the System Configurator.
IMPORTANT: Paid versions are subject to the general terms and conditions of WebHosting and present in this
sense additional services/options: General Business Conditions
You can find the current price list on our homepage: Pricelist WebsiteBuilder Versions
When you install a paid version of WebsiteBuilders, you accept our General Terms and Conditions.
Should you want to cancel a paid version of the WebsiteBuilders according to the General Terms and Conditions,
please contact us via authenticated message.
So that you can create/edit your webpage with WebsiteBuilder, you must have a web broswer from one of the
following providers in the newest versions installed on your computer:
Internet Explorer, Mozilla Firefox or Google Chrome.
There is no addtional software to install on your computer.
You can use it to edit your website using WebsiteBuilder from anywhere in the world with any computer with
the matching webbrowser!
Activate/Order WebsiteBuilder
Here’s how to activate/order a version of WebsiteBuilder:
Select the button Add:
Select the desired WebsiteBuilder account.
Enter the directory into which the finished webpages should be published.
Leave the field empty in order to public the websites in the root directory (Root).
Attention: Any other data present will be overwritten! If they have not been backed up, you need to enter a
sub-directory here!
Please note the option Additional Settings for Using WebsiteBuilder
82
Manual
Select the button Install:
You will receive the corresponding confirmation of installation:
Now you can create your professional website quickly and easily in just a few steps.
Select Login and follow the WebsiteBuilder Assistant, which will lead you through the process of creating your
site.
Enjoy!
83
Manual
Additional Settings for Using WebsiteBuilder
When installing WebsiteBuilder, you can select whether you want to publish the finished webpages in the root
directory or in a sub-directory (e.g. /wsb).
Publishing in the Root Directory
If you create/edit your webpages in WebsiteBuilder, you can publish them to the root directory at the end by
pressing the button.
The webpages/files are saved on your web memory storage.
If your domain / webpage is accessed by a visitor, the start page that you created with the WebsiteBuilder
appears automatically.
Any existing files with the same file name will be overwritten (index.html etc.)
Publishing into a Sub-Directory
If you create/edit your webpages in WebsiteBuilder, you can publish them to the selected root directory at the
end by pressing the button.
The webpages/files are saved on your web memory storage.
If your domain / webpage is accessed by a visitor, the start page that you created with the WebsiteBuilder does
not automatically appear. Instead, an already existing start page (index.html etc.) will be accessed. If you
would like that your start page created with WebsiteBuilder appears directly, then you must set up so-called
domain mapping. You can find out how under Settings -> Domain Mappings -> Domain-Mappings help
Any already existing files with the same file name will be overwritten (index.html etc.).
84
Manual
Creating/Editing Websites with WebsiteBuilder
To create or revise your webpage, first always log in to the System Configurator.
Select the domain you want to edit and then select Applications -> WebsiteBuilder.
Now click on the desired WebsiteBuilder installation and select Login.
Attention: If you have subscribed to several WebsiteBuilder accounts, you may not log in to more than one
account at the same time!
The WebsiteBuilder Assistant appears. Make the desired changes and then publish your webpage.
You can receive additional help in our manuals WebsiteBuilder First-Steps and WebsiteBuilder.
WebsiteBuilder Editions / Versions
Using the Webland WebsiteBuilder you can easily and quickly create your own professional homepage.
The WebsiteBuilder is available to you in the Limited and in the Full Version.
You can find addtional information on our homepage: Webland WebsiteBuilder
85
Manual
Upgrades
Upgrades can be done from the Limited to the Full Version.
Possible Upgrade
Limited Version -> Full Version
Select the button Upgrade:
Select the WebsiteBuilder Full account and select the button Upgrade:
You will receive the corresponding confirmation of upgrade:
Downgrades
Downgrades are generally not posssible for reasons of software engineering.
See the point Delete/Cancel WebsiteBuilder.
86
Manual
Delete/Cancel WebsiteBuilder
You can delete the free version "Limited" in System Configurator as soon as you no longer need them.
Attention: The webpages generated by WebsiteBuilder are then irrevocably rendered unusable!
Paid versions are subject to the General Terms and Conditions of WebHosting and in this sense are an added
service/option: GTC
For this reason you cannot delete paid versions yourself.
Cancel any versions you no longer need by e-mail to [email protected]
Attention: The webpages generated WebsiteBuilder are then irrevocably rendered unusable!
In order to delete a free version, select it and click on the Delete button.
Confirm that you want to delete the account. Attention: The webpages generated WebsiteBuilder are then
irrevocably rendered unusable!
87
Manual
Typo3
Typo3 is one of the most efficient and powerful OpenSource ContentManagementSystemen (CMS).
IMPORTANT: Typo3 is a database-based CMS.
Please set up a MySQL database beforer installing Typo3 for this reason: MySQL
IMPORTANT: Typo3 in Version 4.2.x requires PHP-version 5.
Please make sure that PHP 5 is activated for the installation directory before you install Typo 3 Version 4.2.x.
You can find help for PHP-versions under: PHP Versions
Install Typo3
To install Typo3, select the button "Add":
Now enter the installation path (directory) for the Typo3 installation:
To install Typo3, click on the button "install":
88
Manual
Typo3 will now be installed in the desired directory. The procedure lasts up to 3 minutes.
You must wait until this time is elapsed before you continue with this configuration, since otherwise the
installation can fail!
Typo3 Basis-Configuration
Select the desired Typo3 installation and select "Typo3 Frontend (Configuration)":
Confirm with the button "Continue":
89
Manual
You will now be asked to enter the information into the MySQL database in use.
If you have not yet set up the database, you can fiind out how to proceed under the following link:
MySQL
Enter the user name, the password and the host name (Database Server) for your MySQL Database:
Note: You can find out here how you have these data displayed: MySQL Access Data
Select "Continue":
90
Manual
Now select your database under "Select an EMPTY existing database" and continue by pressing "continue":
91
Manual
Select "Import database":
92
Manual
You have now concluded the Basic-Configuration. Write down the "Username" and "Password" for the backendLogin.
After that you can close this window:
93
Manual
For security reasons, various information should now be changed.
In the overview, select Typo3 Installation and Select "Typo3 Administration":
In order to log in, enter the username "admin" and "password" as the password.
Select the button "Login":
You are now in the Adminstrations-Area of Typo3:
You will now see the following warning:
94
Manual
You should now change your user data under both "User Admin" as well as "Install":
After this, you should delete the file named "ENABLE_INSTALL_TOOL", which is only needed for installation.
This file is stored in your installation directory in the folder "typo3conf".
You can delete this file via FTP or by selecting Typo3 Installation in the System Configurator and clicking on
"Repair" (see the next point "Repair Typo3").
95
Manual
Repair Typo3 (Reset permissions)
If a Typo3 Installation no longer functions correctly, it could be that there was some manipulation on the part of
the customer that changed the permissions for the individual directories.
In order to re-set the permissions, select Typo3 Installation and then select the "Repair" button:
Confirm re-setting the permissions with the button "Repair permissions":
96
Manual
Delete Typo3
If you want to delete the Typo3 Installation, then select Typo3 Installation and select the button "delete":
Confirm that you want to delete the Typo3 Installation using the "Delete" button.
Attention:
All configurations and settings will be irrevocably deleted (no Restore-option). The MySQL database behind it
and its content will NOT be deleted!
97
Manual
Joomla
Joomla is one of the most powerful OpenSource Content Management Systems (CMS).
IMPORTANT: Joomla is a database-driven CMS.
For this reason you will need to set up a MySQL database before you install Joomla:
MySQL
IMPORTANT: The version of Joomla used absolutely requires PHP Version 5!
Before installing Joomla, make sure that you have selected PHP Version 5 for your webserver:
PHP Versions
Install Joomla
In order to install Joomla, select the "Add" button:
Now enter the installations-path (directory) for the Joomla installation:
To install Joomla, clikc on the "Install" button:
98
Manual
Joomla is now installed in the desired directory installiert. The procedure takes up to 5 minutes.
Wait until this time elapses before you continue with the configuration since otherwise the installation can fail!
Joomla Basic-Configuration
Select the desired Joomla Installation and select "Joomla Basic-Configuration":
99
Manual
You are now in the main configuration.
Select the desired installation language (German (DE-CH-AT) is recommended) and complete the main
configuration with your information.
Enter a name for the Joomla installation under "Name".
Enter the desired e-mail address under "Admin-E-Mail", set your desired username under "Admin-User name"
and a password under "Administrator-Password " and then confirm it.
Write the password since you will need it for later administration.
Confirm with the "Continue" button:
100
Manual
You will now be asked to enter the information aobut the MySQL database to be used.
If you have not yet set up a MySQL database, you can find out how to under the following link:
MySQL
Enter the database type "mysql".
Enter the server name, the user name, the password and the database name of your MySQL database:
Note: You can find out how to display these data here: MySQL Access Data
Note2: If you want to use an existing MySQL database in which tables are already present, you can delete
these under "Old Database Tables".
Attention: The data are irrevocably lost!
Confirm with the "Continue" button:
101
Manual
Attention: As an unpracticed Joomla-User you absolutely ought to install the sample data.
Select the button "Install Sample Data" in the desired lanaguage (German (DE) or English (EN) Sample Data:
Standard Contents) is recommended) !
Select whether you want to have the configuration settings sent to your admin-e-mail address.
Confirm with the "Install" button:
102
Manual
After successfully completing the installation, you will receive the following confirmation.
You have now completed the Basic-Configuration. Make sure that you have written down your username and
password.
Next you need to delete the Installation Directory as instructed in the warning.
You can now close this window:
103
Manual
The "Installation Directory" now needs to be deleted for security reasons.
Select Joomla Installation in the overview and select "Delete Joomla Installations-Directory":
If you have completed the Basic-Configuration, you can now confirm the deletion of the InstallationsDirectories.
Select the button "Delete Installation-Directory":
To continue with the Administration, select the overview "Joomla Administration":
104
Manual
Now enter your username (the default is "admin") and the password that you selected previously.
Select the button "Login".
105
Manual
You are now in Joomla’s Administration-Area and can continue with the Administration / Configuration.
Select e.g. the button "Configuration ":
106
Manual
Operate Joomla with "Search Engine Friendly URL's"
Recommended Settings
Activate the 1st and 2nd Radio-Button "Search Engine Friendly URLs" and use "mod_rewrite":
To use the Function "mode_rewrite", you first need to re-name the file "htaccess.txt", which is located in the
InstallationsDirectories of your Joomla-Application, to .htaccess.
Access the file using an FTP-program in order to re-name it.
On the server side, the parameters and file names will no longer be displayed.
E.g.:
The
original
URL
"ihredomain.ch/joomla/index.php?option=com_newsfeeds"
"ihredomain.ch/joomla/news"
107
will
now
appear
as
Manual
Alternative Settings
Activate only the 1st Radio-Button "Search Engine Friendly URLs"
On the server side, the parameters will no longer be displayed and a directory is added.
E.g.:
The
original
URL
"ihredomain.ch/joomla/index.php?option=com_newsfeeds"
"ihredomain.ch/joomla/index.php/news"
108
becomes
Manual
Activate all Radio-Buttons "Search Engine Friendly URLs", "mod_rewrite nutzen" and Add "File Ending to URL"
To use the "mode_rewrite" function, you must first re-name the file "htaccess.txt", which is located in the
Installations Directories for your Joomla-Application, to .htaccess.
Access the file wiht an FTP-program in order to re-name it.
On the server side, the parameters and file names will no longer be displayed and the file ending will be added.
E.g.:
The
original
URL
"ihredomain.ch/joomla/index.php?option=com_newsfeeds"
"ihredomain.ch/joomla/news.html"
109
becomes
Manual
Repair Joomla (Reset permissions)
If a Joomla Installation no longer functions correctly, it can be that there was some manipulation on the part of
the customer that changed the permissions for the individual directories.
To re-set the authorisations, select Joomla Installation the "Repair" button:
Confirm the re-setting of permissions wiht the "Repair Authorisations" button:
110
Manual
Delete Joomla
If you want to delete the Joomla Installation, then select Joomla Installation and select the "Delete" button:
Confirm deletion of the Joomla Installation with the button "Delete":
Attention:
All of your own configurations and settings will be irrevocably delete (no restore-option).
The MySQL database behind it and its contents will NOT be deleted!
111
Manual
DotNetNuke
DotNetNuke® is one of the most powerful OpenSource ContentManagementSystemen (CMS).
IMPORTANT: DotNetNuke® is a database-driven CMS.
For that reason, you need to set up a new MSSQL database first before installing DotNetNuke® (paid option):
Set-up: MSSQL
IMPORTANT: DotNetNuke® in the current version requires the ASP.NET Framework in Version 3.x
Before installing DotNetNuke®, make sure that version 3.x is activated for the Installation Directory.
You can find Help for ASP.NET-versions under: Versions of ASP.NET
Install DotNetNuke
To install DotNetNuke, select the "Add " button:
Enter the installation-path (directory) for DotNetNuke Installation.
DotNetNuke absolutely must be installed in a directory (installation in the webroot is not possible).
Click on the "Install" button to install DotNetNuke:
112
Manual
DotNetNuke is now installed in the desired directory.
The process can last up to 5 minutes
You must wait until this time has elapsed before you can continue with the configuration, since otherwise the
installation will fail!
DotNetNuke Basic-Configuration
IMPORTANT: The Basic-Configuration must be completed without interruption!
Select the desired DotNetNuke installation and select "Start DotNetNuke Frontend":
113
Manual
Under "Choose Language", select English (if desired, otherwise select "Next").
Then you must wait until the page re-loads (can take up to 10 seconds).
114
Manual
Select "Continue":
115
Manual
Select "Continue" (the permissions are already set correctly):
116
Manual
You will now be asked to configure the database connection.
Select the database "SQL-Server 2000/2005 Database" (right variant).
Then you will need to wait for the page to re-load (can take up to 10 seconds).
Deactivate the control box "Integrated Security".
Then you must wait until the page re-loads (can take up to 10 seconds).
117
Manual
Enter the information for the MSSQL database.
Note: The database to be used must be newly set-up, that is, it many not contain any data!
Under "Server", enter the name of the database servers and under "Database" enter the name of the MSSQL
database.
Under "User-ID" enter the user name, under "Password" enter the password for your database.
Note: You can find out here how to display these data: MSSQL Database Access Data
Then select "Test Database Connection":
118
Manual
If the connection is successful, you will receive the following message.
In other cases you will need to check your entries.
Then select "Continue".
Wait until the database –installations script is completely executed and ends.
Then select "Continue".
Should you receive an error message, then you have most likely used a database that was not newly set up
(that it already contains data).
119
Manual
Now enter the information for the system administrator: First Name, Last Name, User Name, Password and EMail Address.
Then select "Continue".
120
Manual
Now enter the information about the Portal Administrator: First Name, Last Name, User Name, Password and
E-Mail Address.
Then select "Continue".
121
Manual
The installation is now completed.
Then select the button "Completed (Call Up Web-Site)".
122
Manual
You can now see your DotNetNuke webpage.
Select the button "Login" in order to log in to the Adminstration-Area.
123
Manual
In order to log in, enter the previously defined username under "Username" (system administrator or portal
administrator) and the previously defined password under "Password".
You will then be in the Adminstrations-Area.
124
Manual
Repair DotNetNuke (Reset permissions)
If a DotNetNuke installation no longer functions correctly, it can be that there was some manipulation on the
part of the customer that changed the access permissions of the individual directories.
In order to re-set the permissions, select the DotNetNuke installation and select the "Repair" button:
Confirm the re-setting of the permissions with the button "Repair permissions".
125
Manual
Delete DotNetNuke
If you would like to delete the DotNetNuke installation, then select the DotNetNuke Installation and select the
"Delete" button:
Confirm the deletion of the DotNetNuke installation with the "Delete" button:
Attention:
All of your own configurations and settings will then be irrevocably deleted (no restore-option).
The MSSQL database behind it and its content will NOT be deleted!
126
Manual
os Commerce
os Commerce is among the most powerful OpenSource Shop-solutions.
IMPORTANT: os Commerce is a database-driven Shop-solution.
For this reason set up a MySQL database before you install os Commerce:
Set-up:
MySQL
IMPORTANT: To make guarantee that os Commerce will function correctly, you must select PHP Version 5 for the
installation directory (directory in which os Commerce is installed).
You can learn here how you can change the PHP Version used: PHP Versions
Install os Commerce
To install os Commerce, select the button "Add":
Enter the installations-path (directory) for the installation of os Commerce:
To install os Commerce, click on the "Install" button:
127
Manual
os Commerce is now installed in the desired directory. The procedure takes up to 3 minutes.
You must wait for this time to elapse before you continue with the configuration, since otherwise the installation
can fail!
os Commerce Basic-Configuration
Select the desired os Commerce installation and Select "osCommerce Basic-Configuration ":
128
Manual
To start with the Basic Configuration, Select "Continue":
129
Manual
You will now be asked to enter the information for the MySQL database to be used.
If you have not yet set up the database, you can find out how to do so under the following link:
Set up MySQL.
Enter the database server, the username, the password and the database –name of your MySQL database:
Note: You can find out here how to display these data: MySQL Access Data
Select "Continue" again:
130
Manual
A test connection will be established and confirmed. The WWW address and the Webserver Directory will be
displayed.
You can confirm this information with "Continue":
131
Manual
Enter the "Shop Name", "Shop-Owner" and your "E-Mail Address".
Enter an "Administrator-User Name" and an "Administrator-Password".
Attention: You need the information "Administrator-Username" and an "Administrator-Password" for the next
login!
You can confirm this information with "Continue":
132
Manual
You have now completed the Basic-Configuration.
Check again to make sure that you have written down the usernames and the password.
The next thing you need to do is delete the so-called Installation Directory (Security Aspect).
You can now close this window:
133
Manual
You have now completed the Basic-Configuration.
Check again to make sure that you have written down the usernames and the password.
The next thing you need to do is delete the so-called Installation Directory (Security Aspect).
You can now close this window:
134
Manual
For security reasons, the so-called "Installations-Directory" must now be deleted.
In the overview, select osCommerce Installation and Select "Delete osCommerce Installations-Directory":
If you have completed the Basic-Configuration, you can now confirm the deletion of the Installation-Directory.
Select the "Delete Installations-Directory" button:
To continue with the Administration, Select "osCommerce Administration" in the overview:
135
Manual
Now enter the "Administrator-Username" and the "Administrator-Password" and select "Login":
You are now in the Adminstration-Area of osCommerce:
136
Manual
Repair os Commerce (Reset permissions)
If an os Commerce Installation no longer functions correctly, it can be that there was some manipulation on the
part of the customer that changed the access permissions of the individual directories.
In order to re-set the permissions, select the corresponding osCommerce Installation and select the"Repair"
button:
Confirm the re-setting the permissions with the "Repair permissions" button:
137
Manual
Delete os Commerce
If you would like to delete os Commerce Installation, then select os Commerce Installation and select the
"Delete" button:
Confirm the deletion of the os Commerce Installation with the "Delete" button:
Attention:
All of your own configurations and settings will be irrevocably deleted (no restore-option).
The MySQL Database behind it and its content will NOT be deleted!
138
Manual
Guestbook
We provide you with a secure guestbook with various functions.
The guestbook can be installed with the push of a button and is immediately active.
If you have questions about the guestbook, contact the manufacturer directly.
Webland cannot provide any support for the remaining configuration of the guestbook.
Install Guestbook
If you would like to install the guestbook, select the "Add" button:
Enter the Installation-Path (Directory) for the Guestbook-Installation.
To install the guestbook by clicking on the "Install" button:
You will receive a confirmation that the guestbook has been installed in the desired directory.
The installations-procedure takes around 60 seconds!
139
Manual
Guestbook Basic-Configuration
If you would like to configure the guestbook, click on the "Plus-Sign" next to the corresponding guestbook and
select "Guestbook Administration":
In the Login window enter: "admin" as the username (standard-username)
and "password" as the password (standard-username).
Then select "Login":
Then you must change the username and password after the first login .
Select "Edit Admin-Account":
140
Manual
Now, enter a new username and a new password. Write down the new information since you will need it for any
login!
Repair Guestbook (Reset permissions)
If the guestbook no longer functions correctly, it can be that there was some manipulation on the part of the
customer that changed the access privleges for the individual directories.
In order to re-set the permissions, select guestbooks and select the "Repair" button:
Confirm the reset of the permissions using the "Repair permissions" button:
141
Manual
Delete Guestbook
If you would like to un-install the guestbook then select the guestbook and select the "Delete" button:
Confirm the deletion of the guestbook with the the "Delete" button:
Attention:
All entries will be irrevocably deleted (no restore-option)!
142
Manual
Wordpress - Weblog
WordPress is a contemporary weblog-system for publishing personal contributions- The focus is on aesthetics,
web standards and user-friendliness.
IMPORTANT: WordPress is a database-driven blog-system.
Please set up MySQL database prior to installing WordPress:
Set-Up:MySQL
Install WordPress-Weblog
In order to install the WordPress-Weblog, select the "Add" button:
Enter the Installations-Path (directory) for installing the WordPress-weblog:
To install the WordPress-weblog just press the "Install" button:
143
Manual
WordPress-weblog is now installed in the desired directory. The process takes up to 3 minutes.
You must wait until this time elapses before you continue with configuration, since otherwise the installation can
fail!
WordPress-Weblog Configuration
Select the desired WordPress-weblog installation and select "Wordpress Configuration":
144
Manual
You will now be asked to enter the information for the MySQL database to be used.
If you have not set up the database yet, then you can find out how to under the following link:
Set-up: MySQL
Enter the database name, the username, the password and the database server for your MySQL database:
Note: You can learn how to display this data here: MySQL Access Data
Enter the data for YOUR database and select "Continue":
145
Manual
Enter a title for your blog as well as your e-mail address. Then select "Install WordPress ?":
146
Manual
You have now completed the Basic-Configuration.
You must write down the "Username" and the "Password ".
Then you can close the window:
147
Manual
To contiue with administration, select"Wordpress Adminstration" in the Overview in System Configurator:
You are now in the Administration-Area of the WordPress-weblog, enter the username and the password:
148
Manual
Repair WordPress-Weblog (Reset permissions)
If a WordPress-Weblog installation no longer functions correctly, it can be that manipulations on the part of the
customer changed the access permissions of the individual directories.
In order to re-set the permissions, select the Wordpress-Weblog installation and select the "Repair" button:
Confirm re-setting the permissions with the "Repair permissions" button:
149
Manual
Delete WordPress-Weblog
If you would like to delete the WordPress-Weblog installation, select the WordPress-Weblog installation and
select the "Delete" button:
Confirm the deletion of the WordPress-Weblog installation with the "Delete" button:
Attention:
All of your own configurations and Settings will be irrevocably deleted (no restore option).
The MySQL database and its content will NOT be deleted!
150
Manual
phpBB - Forum
You can easily install the most popular Open Source Forum phpBB in a directory of your choice with the push of
a button.
IMPORTANT: phpBB is a database-driven forum.
Please set up a new MySQL database before installing the phpBB installation:
Set up MySQL
IMPORTANT: The version of phpBB used absolutely needs PHP Version 5!
Prior to installing phpBB, make sure that you have selected PHP Version 5 on your webserver: Change: PHP
Versions
Install phpBB
In order to install phpBB, select the "Add" button:
Now enter the installations-path (directory) for the phpBB installation:
Click on the "Install"button to install phpBB:
151
Manual
phpBB is now installed in the desired directory. The process lasts up to 5 minutes.
You must wait for this time to elapse before you continue with the configuration, since otherwise the installation
can fail!
phpBB Basic-Configuration
Select "phpBB Basic-Configuration":
Select the tab "Install".
152
Manual
Confirm the action with the "Continue with Next Step" button.
Go to the end of the page and confirm it with the "Start Installation " button.
153
Manual
You will now be asked to enter the information about the MySQL database you want to use.
If you have not yet set up a mySQL database, you can find out how to under the following link:
Set-up MySQL
Enter the server hostname, the name of the database, the database user name, and the database password for
your MySQL database:
Note: You can find out how to display these data here: MySQL Access Data
Confirm this action with the "Continue with Next Step" button.
154
Manual
Confirm this action with the "Continue with Next Step" button.
Now enter a username for the administrator, a password and an e-mail address.
Confirm this action with the "Continue with the Next Step" button.
155
Manual
Confirm this action with the "Continue with the Next Step" button .
Confirm this action with the "Continue with the Next Step" button.
156
Manual
Go the the end of the page and confirm this action with the "Continue with the Next Step" button.
Confirm this action with the "Continue with the Next Step" button.
157
Manual
You have now concluded the basic configuration. You can close this window.
For security reasons the so-called "Installations-Directory" must be deleted.
In the overview, select phpBB installation and select "Delete phpBB Installations-Directory":
158
Manual
If you have completed the Basic-Configuration, you can now confirm the deletion of the installation directory.
Select the button "Delete Installations-Directory":
To continue with the Administration, select "phpBB Administration" in the overview:
159
Manual
Now enter your previously selected username and password.
Select the "Login" button.
160
Manual
You are now inthe phpBB Administrations-Area and can continue with Administration / Configuration.
161
Manual
Repair phpBB (Reset permissions)
If a phpBB installation no longer functions correctly, it can be that there were manipulations on the part of the
customer that changed the access permissions to the individual directories.
To re-set the permissions, select die phpBB Installation and select the "Repair" button:
Confirm the re-set of the permissions with the "Repair permissions" button:
162
Manual
Delete phpBB
If you would like to delete the phpBB installation, then select the phpBB installation and select the "Delete"
button:
Confirm deletion of the phpBB installation with the "Delete" button:
Attention:
All of your own configurations and settings will be irrevocably deleted (no restore option).
The MySQL database and its content will NOT be deleted!
163
Manual
DokuWiki - Wiki
You can easily install the popular Open Source Wiki DokuWiki in the directory of your choice with the push of a
button.
Note: DokuWiki is a purely text-based Wiki, meaning that no database is needed.
IMPORTANT: The version of DokuWiki used requires PHP Version 5!
Before installing DokuWiki, make sure that you have selected PHP Version 5 for your webserver: PHP Versions
Install DokuWiki
To install DokuWiki, select the "Add " button:
Enter the installation path (directory) for die DokuWiki installation:
Click on the "Install" button to install DokuWiki:
DokuWiki is now installed in the desired directory. The process takes up to 5 minutes.
You must wait for this time to elapse before you continue with the configuration since otherwise the installation
can fail!
164
Manual
DokuWiki Basic-Configuration
Now select the desired DokuWiki Installation and select "DokuWiki Basic-Configuration":
165
Manual
Enter the necessary information "Wiki-Name", "Administrator User Name", "Full Name", "E-Mail", "Password ".
Select the desired Wiki-Typ under "Start Settings for Access Control (ACL)".
Then select "Save".
166
Manual
You have completed configuration. You may close the window.
For security reasons you now need to delete the so-called "Installations-Script".
In the overview, select the DokuWiki installation and select "Delete DokuWiki Installations-Script":
Once you have completed the Basic-Configuration you can confirm the deletion of the installations-script.
Select the "Delete Installations-Script" button:
167
Manual
This confirms the deletion.
To continue with administration, select "DokuWiki Frontend" in the overview:
You are now in your newly set-up Wiki.
168
Manual
Repair DokuWiki (Reset permissions)
If a DokuWiki installation no longer functions correctly, it can be that the have been manipulations on the part
of the customer tat have changed the access permissions for the individual directories.
In order to re-set the access permissions, select the DokuWiki installation and then select the "Repair" button:
Confirm the re-setting of the access permissions with the "Repair permissions" button:
169
Manual
Delete DokuWiki
If you would like to delete the DokuWiki installation, then select the DokuWiki installation and select the
"Delete" button:
Confirm deletion of the DokuWiki installation with the "Delete" button:
Attention:
All of your own configurations and settings will be irrevocably deleted (no restore-option).
170
Manual
E-Mail / Xchange Administration
General
"E-Mail Administration" inlcudes the following functions:
• Add / change / delete of e-mail accounts (Pop/Imap)
• Overview of existing e-mail accounts (Pop/Imap)
• Add / change / delete of distributor lists
• Overview of existing distributor lists
• Activate spam blocker
• Manage the Catch-All function
• Add / change / delete of mailing lists
• Overview of existing mailing list
Additional Account Settings
The user can make additional settings for an e-mail account by logging in to Xchange Web Access with his/her
e-mail account (under www.webland.ch).
The user can configure the following functions via Xchange Web Access:
• General settings (such as selection of language or visual appearance)
• E-Mail account settings and integrate external e-mail accounts
• Anti-spam protection
• Autoresponder
• Forwardings
• User rules
• Server rules
• Calendar settings
Note: You can find help for these functions directly in the Online-Help menu for Xchange Web Access.
171
Manual
E-Mail / Xchange Accounts
Here you can set up, edit and delete new E-Mail/ Xchange accounts and receive the status of your mailserver.
For every hosting account you will have at your disposal a certain number of "Standard" E-Mail / Xchange
accounts depending on the subscription that you booked.
These accounts have e-mail, calendar, contacts, tasks and notes functionalities.
Status MailServer
Here you can see how much memory space total is available on your mailserver with the subscribed hosting
account, how much is already reserved and how much is still available.
You also see how many E-Mail / Xchange accounts total are available with the hosting account, how many
already exist and how many are still available.
You can activate Xchange SmartSync and Hosted-Xchange
Accounts at any time using the "Order-Button" and use them immediately.
And remember, we grant you a 30-day money-back guarantee for these accounts!
Should you have no more memory capacity or "Standard" E-Mail / Xchange account left available, you have 2
options:
1. Delete any E-Mail / Xchange account that you no longer need and release memory space this way.
2. Request an upgrade to a higher level hosting account from our Support-Department.
172
Manual
Add E-Mail / Xchange Account
Click on "Add Xchange Account ", in order to set up a new account:
Now enter the required information:
Account
In this field, enter the new account that you want to set up.
Form: felix.muster (without @IhreDomain.ch, that is only the part left of the @ sign).
Account Type
Select the desired type of account, Xchange Standard, SmartSync or Hosted-Xchange.
Should there be no Xchange SmartSync or Hosted-Xchange account available, then you can order one using the
"Order-Button".
Alias-Names (optional)
In this field, enter the aliases for this account (to the extent desired).
With an alias you route e-mails not only to the e-mail address for the account but also to that of the alias
address.
Example:
You name the account "felix.muster". As an alias you also set up an "f.muster".
This setting routes all e-mails to [email protected] and [email protected] to the account
[email protected] (your account is thus accessible over multiple e-mail addresses).
Note: To retriebe the e-mails you must always log in with the main e-mail account [email protected]
Password
Here you can assign the new e-mail account a password.
Note: The password can be changed by the Domain Administrator or the user at any time.
173
Manual
Confirm Password
Enter the password again.
Name displayed
Enter the matching full name (can be any). This name will appear to the recipient as the sender name in the
mail program.
Use the SPAM-Folder
The "Use Spam-Folder" option is available.
For this setting to be effective, SPAM protection must be activated for this account. It is automatically activated
for newly established accounts.
You can find the help for this option under Anti Spam Settings .
When the setting Use Spam-Folder is activated, the affected message will automatically be moved to the Spam
folder.
This folder will be automatically activated when the first Spam message is received.
E-Mails in the Spam folder will be automatically deleted after 30 days.
If you do not use the Spam-Folder setting, it will leave the Spam message in the inbox but will add the
characters "X-Spam-Flag: YES" to the e-mail’s header.
On the basis of this marking you can, for example, set up your own rules in your local mail program.
Note: The option Use Spam Folder is activated as a default. This setting can be changed at any time.
Forward To
If you would like to forward the e-mails to this account on to another e-mail address, enter the e-mail address
here.
Note: This setting can also be adjusted by this account’s user directly in Xchange Web Access.
Leave Copy in Account
If you have defined a target address under "forward to", you can decide here whether you want ot leave a copy
of the e-mail in the account itself by activating/de-activating the control box.
Note: We recommend that you de-activate the control box because otherwise you will fill your e-mail account
with redundant messages and reach the memory space limit, causing both the account and the forward function
to cease operating!
174
Manual
Expanded Settings
Here you can make additional setting to the e-mail account.
WebAccess Status
Here you can select whether the the account can be accessed via Xchange Web Access or not:
• Active: The e-mail account is activated
• Locked (Login): The e-mail account cannot be accessed. Access via local mail program is possible.
• Note: The option "Active" is the default.
• We recommend that only experienced users change this setting.
175
Manual
Account Status
Here you can select the status for the account:
Active : The e-mail account is activated without restrictions
Locked (login): The e-mail account is deactivated, it is not possible to log in via Xchange Web Access and
retrieve e-mail wiht a local mail program. E-mails will continue to be received.
Locked (login and receipt): The e-mail account is blocked for both the login into Xchange Web Access, retrieving
mail with a local mail program as well as for the receipt of e-mails.
Note: The option "Active" is the default.
We recommend that only experienced users change these settings.
Memory Space Reserved (MB)
Under "Reserved Memory Space (MB)", enter the maximum available memory space for this e-mail account. If
you enter nothing, the default setting of 250 MB wil lbe used. The minimum sizt is 10 MB, the maximum size
2000 MB (2 GB).
Note: Should you reserve more memory space than is still available to you, you will receive the error message,
"memory space exceeded".
In this case must either enter a smaller value for the reserved memory space or reduce the reserved memory
space for another e-mail account.
Here the memory space can be set to a minimum of the amount of memory currently already occupied by this
account.
You can see the memory space occupied under "Memory Space Occupied".
Memory Space Occupied (MB)
When setting up a new e-mail accounts is, this value is always 0, since there are not data in this account yet.
Note: If you later want to change the reserved memory space, please make note of the information under
"Memory Space Occupied(MB)". You cannot set the reserved memory lower than "Memory Space Occupied
(MB)"!
E-Mails delete older than
When you activate this control box, all e-mails for this account will be deleted after a certain time. In this field,
"Number of days" you enter how many days should elapse before an e-mail is deleted.
Note: This option keeps the memory space of your e-mail account from being over extended!
Mailserver Administrator
Here you select whether the user of the e-mail account can log in to the System Configurator using the e-mail
address and password.
With these access permissions, the user can administrate the entire mailserver / Hosted-Xchange (incl. public
files, this makes it suitable to entrust to one person in charge of mailserver administration without that person
being able to make other changes to the hosting account).
176
Manual
When finished, select the "Save" button.
177
Manual
Display/Change E-Mail / Xchange Account Type
Based on the label, you immediately see what sort of E-Mail / Xchange account it is: Standard, SmartSync or
Hosted-Xchange.
In order to change this type of account, select the account and then select the desired account type.
Only the logically possible upgrades or downgrades will be displayed.
Prior to an upgrade, make sure that the desired account type is still available.
You can otherwise subscribe to these using the "Order Button" in the mailserver overview.
Confirm the upgrade/downgrade using the respective "Upgrade" and/or "Downgrade" buttons.
Attention: When an account is downgraded, any data in it will be deleted and any functions de-activated!
178
Manual
Show/Change E-Mail / Xchange Account Properties
In order to show the properties, select the corresponding account in the overview:
The information for your selected account will be displayed.
Make any changes and then confirm them with the "Save" button:
179
Manual
Select the "Advanced" tab to display the Advanced Settings.
Make any changes and confirm them with the "Save" button:
Note: If you would like to change the reserved memory space, take the information under "Memory Used (MB)
into account. You cannot set the reserved memory lower than the number given under "Memory Used (MB)"!
180
Manual
Delete E-Mail / Xchange Account
Select the account to be deleted and select "Delete Account".
If you are sure that you want to delete the account, then select the "Delete" button in the dialogue window.
Attention: When you delete an account, all data still contained in it (e-mails, calendar, contacts, tasks, notes,
files) will be irrevocably deleted!
181
Manual
Distributor-Lists
Here you can set-up, edit and delete new distributor lists, and will see the status of your distributor lists.
Status Distributor-Lists
Here you can see how many distributor lists are available with the total subscribed hosting accounts, how many
you have already set up and how many are still available:
Show Distributor-Lists
To show the properties of already set-up distributor lists, select the matching distributor list in the overview:
182
Manual
The information about the selected distributor list will be displayed:
If you would like to make changes, then follow the point "Change Distributor-Lists".
Add Distributor-Lists
Click on the "Add" button to set up a new distributor list:
183
Manual
Enter the required information:
Distributor-List
In this field, enter the new distributor list you want to set up.
Form: group1 (without @IhreDomain.ch, that is only the part left of the @ sign).
Target Addresses
Here you can enter the e-mail address(es) to which the mails in the distributor list set up above should be sent.
Note: Multiple target addresses must be separated by pressing the "Enter-Button" (new line).
A maximum of 250 characters can be entered into the field "Target Address".
If you would like to enter more recipients, consult the section on "Mailing Lists".
To set up the new distributor list, select the "Save" button.
Change Distributor-Lists
Select the distributor list you want to change out and click on the "Change" button.
new dialogue window will open in which you can make changes similar to the entries under " Add DistributorLists".
184
Manual
Delete Distributor-Lists
Select the distributor-lists you want to delete and click on the "Delete" button.
If you are sure that you want to delete the distributor list, then select the "Delete" button in the dialogue
window.
Send E-Mail to Distributor-List
To send an e-mail to your distributor list and/or its target addresses, direct you e-mail to the already set-up
address for the distributor list:
For example:
You have set up the distributor-list "[email protected]".
The target addresses that you have recorded are:
[email protected]
[email protected]
Now send your e-mail to:
[email protected]
The e-mail will now reach both [email protected] and [email protected]
185
Manual
E-Mail Domain-Aliases
An e-mail domain-alias enables you to activate an additional domain name for the receipt of e-mail, without
operating your own server.
You also have along with a .ch domain a .com domain, which means that yuou can set these up as e-mail
domain aliases so that you can also use the e-mail addresses to the .com addresses.
Note: In order to log in to the mail server, use only the primary domain only (applies to Xchange Web Access
and local mail programs such as MS Outlook)!
Status E-Mail Domain-Aliases
Here you will see how many e-mail domain-aliases are available to you with the subscribed hosting account,
how many are already set up and how many are still availale:
If no more aliases are available, you have 3 options:
1. Delete any alias you no longer need.
2. Request an "upgrade" to a higher level hosting account from our Support-Department.
3. Request one or more additional domain mapping(s) from our Support-Department (additional charges).
In the tree strucutre, you will see the existing domain-aliases. In Figure 1 there aren’t any yet; in Figure 2
there are already 2 domain-aliases:
186
Manual
Set-up New E-Mail Domain-Alias
To set up a new domain-alias, click on the "Plus-Zeichen" next to "Add Domain-Alias":
Now enter the new domain name under "Domain-Alias" and select "Save":
Note: No 3rd Level-Domains can be set up as domain-alias!
You will receive the following confirmation:
187
Manual
Delete E-Mail Domain-Alias
Click on the "Plus-Sign" next to the domain alias you wish to delete and select "Delete":
If you are certain that you want to delete the domain-alias, click on the "Delete" Button.
You will receive the following confirmation:
188
Manual
Anti-Spam Settings
We will provide you with a 3-step anti-spam-system.
It consists of the actual anti-spam-function, the greylisting-function and your own server rules.
Anti-Spam Function
The anti-spam function will be automatically activated for newly set up E-Mail / Xchange accounts.
To make efficient use of the anti-spam-function, the option "Use Spam Folder" must also be activated (see
Point "Show/Change E-Mail / Xchange Account Properties").
Note: If the option "Use Spam Folder", is not activated, spam-e-mails will still be labelled as such however they
wll not be moved to the Spam Folder.
This meains that these e-mails will still land in the inbox-folder !
The end user
cann also activate or de-activate the anti-spam-function and the Option "Use Spam Folder"
himself in Xchange Web Access. Consult the Web Access Manual for additional details.
Note: You can later activate/de-activate the anti-spam-function only via Xchange Web Access!
Greylisting-Function
Note: Read our supplemental information about this! Show supplemental information
Here you can select whether you want to activate/de-activate the server-side greylisting function that we
provide free of charge.
The greylisting-function is valid for all E-Mail / Xchange Accounts in a domain.
189
Manual
Activate/Deactivate Greylisting Function
You can select whether the greylisting function is activated or de-activated globally for all e-mail accounts in
your domain by activating or deactivating the control box.
Deactivate Greylisting Function
If you do not want to use the greylisting function / no longer wish to use it, then de-activate the control box.
Note: You can change this setting any time.
Own Server Rules
You can supplement the anti-spam function wiht additional rules of your own formulation.
You can for example put specific senders on a "Whitelist" or "Blacklist".
These rules of your own enjoy a higher priority than the Spam-Engine.
The user can define these rules directly in Xchange Web Access.
Consult also the Web Access Manual.
190
Manual
Exchange Server Settings
NEW SECURITY MEASURES!
Starting immediately new security measures will be employed on all mailservers.
This enables us to provide your/our mailservers with better protection against Spam-attacks.
The new security measures require specific settings on MS Exchange Servers.
You can read here which settings are needed for which scenario.
What you need to do?
Basically, there are 4 possible scenarios in connection with the operation of your own MS Exchange Server:
MS Exchange Server with Static IP-Address - Sending Mail over the Webland Mailserver
If this scenario corresponds to your circumstances, the following settings must be used from now on:
Storage of the Static, Pulbic IP-Address for the Xchange Server via System Configurator
First log in to the System Configurator under www.webland.ch ein.
You will need your customer number and password:
Now select the point "Manage Accounts":
Then select your domain and click on "Configuration":
191
Manual
In the Navigation Menu, select "E-Mail" (top right), then "MS Exchange Server":
Now enter your static, public IP-address and select "Select Changes".
Use the Following Server as the Sent Mail (SMTP) Server
smtp.speedconnect.ch
SMTP-Authentication may NOT be Activated
You have now completed your settings.
MS Exchange Server with Static IP-Address – Sending Mail Directly over this Server
In this scenario, no changes are necessary.
MS Exchange Server without Static IP-Address – Sending Mail over Webland Mailserver
Sending e-mails over a Webland server is not possible in this scenario.
In this case, you must use the mailserver of your access-providers.
Should you be an xDSL-customer with Webland, please activate the following SMTP-server without the SMTPauthentication:
smtp.speedconnect.ch
MS Exchange Server without Static IP-Address - Sending Mail Directly over this Server
No changes are necessary in this scenario.
192
Manual
Mailing-Lists
Here you can set-up, edit and delete new mailing-lists (distributors) and you will receive the status of your email forwardings.
Status Mailing-Lists
Here you will see how many mailing lists are available total with your subscribed hosting account, how many
are already set up and how many are still available:
Show Mailing-Lists
To view the properties of an already existing mailing list, select the matching list in the overview:
193
Manual
The information about the selected mailing-list will be displayed:
If you would like to make changes please follow the point "Change Mailing-Lists".
194
Manual
Add Mailing-Lists
Click on the "Add" button to set up a new mailing-list:
Now enter the required information:
Name of the Mailing-List
Enter the name of the mailing list you want to set up in this field.
Form: friends (without @IhreDomain.ch, that is only the part to the left of the @ sign).
Target Addresses
Here you can enter the e-mail addresses to which the mails in the mailing list set up above should be sent. The
target addresses can be stated in two formats:
• [email protected]
• Felix Muster <[email protected]>
Note: Multiple target addresses must be separated by pressing the "Enter-Button" (new Line). A maximum of
100 target addresses can be entered.
If you need more recipient addresses you have the option of using the "Mailing-Lists Pro" account.
Target addresses are not checked for syntax. Make sure that the entries are correct.
Make sure that no target addresse are linked to existing distributor lists or mailing lists!
195
Manual
Optional Settings
Activate Password Protection
Your mailing-list can be protected with a password (strongly recommended!).
This assures that only authorised personnel can send e-mails to the mailing list or its recipients.
Password
Enter the password for your mailing list here.
If you have activated password protection, then put the password at the start of the Subject line when sending
an e-mail to the mailing-list (alternatively you can insert the password at the end or in the middle of the
subject). Use no special characters in the password.
Then enter the actual subject of your message (without a blank space):
e.g. MyPasswordHere is the actual subject
To set up the new mailing-list, select the "Save" button.
196
Manual
Change Mailing-Lists
Select the mailing-list you want to change and click on the "Change" button.
A new dialogue window will open in which you can make changes analogously to the instructions under " Add
Mailing-Lists".
Delete Mailing-Lists
Select the mailing-list you want to delete and click on the "Delete" button.
Send E-Mail to Mailing-list and/or its Recipients
In order to send an e-mail to the recipients of the mailing list, just send an e-mail to the name of the mailinglist.
Form: [email protected]
If you have activated password protection, then put the password at the start of the Subject line when sending
an e-mail to the mailing-list (alternatively you can insert the password at the end or in the middle of the
subject). Use no special characters in the password.
Then enter the actual subject of your message (without a blank space):
e.g. MyPasswordHere is the actual subject
197
Manual
Mailing-Lists Pro
Mailing-Lists Pro cannot be set up over the System Configurator.
Mailing-Lists Pro with 2,500 or more recipients are optionally available (additional charges).
You can find additional information here on our webpage.
If you have any further questions, our Support-Department will be glad to assist you.
Status Mailing-Lists Pro
Here you can view how many Mailing-Lists Pro you have subscribed to (optional), how many are already set up
and now many are still available:
Show Mailing-Lists Pro
To show the properties of a Mailing-List Pro which has already been set up, select the matching list in the
overview:
198
Manual
The following information about the selected mailing list will be displayed:
If you would like to make changes, follow the instructions in the point "Change/Edit Mailing-Lists Pro".
Change/Edit Mailing-Lists Pro
Click on the "Change" button to edit and existing Mailing-List Pro:
Make the desired changes:
199
Manual
Mailing-List Pro
The Mailing-List Pro display will come up.
Target Addresses
Here you can enter the e-mail address(es) to which the mails in the Mailing-List Pro set up above should be
sent.
Alternatively a database connection can also be used for address management.
Contact our Support-Department.
The target addresses can be entered in two formats:
• [email protected]
• Felix Muster <[email protected]>
Note: Multiple target addresses must be separated by pressing the "Enter-Button" (new line).
A maximum of 2,500 target addresses can be entered. If you are using a local editing program to manage your
target addresses, you can manage the addresses very easily using Copy/Paste.
Target addresses will not be checked for their syntax. Make sure that the entries are correct.
Make sure that no target addresses are linked with existing distributor-lists, mailing-lists!
Number of Target Adresses
The number of target addresses is limited to 2,500 and cannot be changed.
Maximum E-Mail Size in KB
The size of an e-mail is limited to 1,024 KB and cannot be changed.
Password
A password must be used for the send function so that your Mailing-List Pro is protected from unauthorised use.
When sending an e-mail to the Mailing-List Pro, place the password at the start of the subject line (alternatively
you can insert the password at the end or in the middle of the subject). Use no special characters in the
password.
Enter the actual subject of your message (without blank space):
E.g. MyPasswordHere is the actual subject
200
Manual
To save the changes, select the "Save" button.
Send E-Mail to Mailing-List Pro and/or its Recipients
To send an e-mail to the recipients of the Mailing-List Pro, just send an e-mail to the name of the Mailing-List
Pro.
Form: [email protected]
A password must be used for the send function so that your Mailing-List Pro is protected from unauthorised use.
When sending an e-mail to the Mailing-List Pro place the password at the start of the subject line (alternatively
you can insert the password at the end or in the middle of the subject). Use no special characters in the
password.
Enter the actual subject of your message (without blank space):
E.g. MyPasswordHere is the actual subject
201
Manual
Appendix
Login Integration
Login Integration into Your Own Webpage
You can integrate the Login for the System Configurator so that you can log in directly over your own website.
The Login is available in 2 variants:
• Customer–Login with customer number and customer password
• Domain-Login with domain name and domain-password
Customer-Login
With the Customer–Login you log in to the System Configurator with your personal customer number and the
matching customer-password.
With this login you can configure all of your hosting accounts at once and manage your personal customer data.
Domain-Login
With the Domain-Login, you log in using a domain name and the matcing password.
With this login you can only configure this domain and cannot manage customer data.
Neither other domain names nor customer data can be viewed with this login.
This login is well suited for Webland resellers. The domain-Login can also be passed on to end-customers
without other domains or customer data being visible.
Login-Masks / Code
Below you will find 2 variants of Login masks each for the Customer-Login and the Domain-Login.
Under the respective illustration you will find the code which you need to integrate on your site. You can insert
this code into your existing code easily with Copy/Paste.
202
Manual
Graphical input mask "Customer-Login"
<table width="173" border="0" align="center" cellpadding="0" cellspacing="0">
<tr>
<td><img src="http://help.sysconf.webland.ch/img/systemconfigurator.gif" width=173 height=18 border=0
alt=""></td>
</tr>
<tr>
<td><table width="173" border="0" cellpadding="0" cellspacing="0"
background="http://help.sysconf.webland.ch/img/systemconfigurator_bgtable.gif">
<form name="login" method="post" action="https://sysconf.webland.ch/kunden.aspx" target="_blank">
<tr>
<td colspan="3" align="left"><img src="http://help.sysconf.webland.ch/img/nix.gif" width="173"
height="5"></td>
</tr>
<tr>
<td align="left"><img src="http://help.sysconf.webland.ch/img/nix.gif" width="16" height="10"></td>
<td><img src="http://help.sysconf.webland.ch/img/systemconfigurator_kl.gif" width=110 height=17 border=0
alt="Kunden-Nummer eingeben."></td>
<td align="right">&nbsp;</td>
</tr>
<tr>
<td colspan="3" align="left"><img src="http://help.sysconf.webland.ch/img/nix.gif" width="173"
height="5"></td>
</tr>
<tr>
<td align="left"><img src="http://help.sysconf.webland.ch/img/nix.gif" width="10" height="10"></td>
<td><input type="text" name="username" value="" size=25 style='{width:144px;font-size:9px;border:2px
solid inset}'></td>
<td align="right">&nbsp;</td>
</tr>
<tr>
<td colspan="3" align="left"><img src="http://help.sysconf.webland.ch/img/nix.gif" width="173"
height="5"></td>
</tr>
203
Manual
<tr>
<td align="left">&nbsp;</td>
<td><img src="http://help.sysconf.webland.ch/img/systemconfigurator_kn.gif" width=110 height=17
border=0 alt="Kunden-Nummer eingeben."></td>
<td align="right">&nbsp;</td>
</tr>
<tr>
<td colspan="3" align="left"><img src="http://help.sysconf.webland.ch/img/nix.gif" width="173"
height="5"></td>
</tr>
<tr>
<td align="left"><img src="http://help.sysconf.webland.ch/img/nix.gif" width="10" height="10"></td>
<td><input type="password" name="password" value="" size=25 style='{width:144px;fontsize:9px;border:2px solid inset}'></td>
<td align="right">&nbsp;</td>
</tr>
<tr>
<td colspan="3" align="left"><img src="http://help.sysconf.webland.ch/img/nix.gif" width="173"
height="5"></td>
</tr>
<tr>
<td align="left">&nbsp;</td>
<td><img src="http://help.sysconf.webland.ch/img/systemconfigurator_pw.gif" width=90 height=17 border=0
alt="Passwort eingeben.">
<input type="image" name="submit" src="http://help.sysconf.webland.ch/img/systemconfigurator_login.gif"
width=49 height=17
border=0 alt="GO"></td>
<td align="right">&nbsp;</td>
</tr>
<tr>
<td colspan="3" align="left"><img src="http://help.sysconf.webland.ch/img/systemconfigurator_bottom.gif"
width="173" height="4"></td>
</tr>
</form>
</table></td>
</tr>
</table>
204
Manual
Text-based input mask "Customer-Login"
<table width="173" align="center" cellpadding="3" cellspacing="0" bgcolor="#101463">
<tr>
<td><font face="Verdana, Arial, Helvetica, sans-serif" color="#ffffff" size="1"><strong>System
Configurator</strong><font></td>
</tr>
</table>
<table width="173" align="center" cellpadding="1" cellspacing="0" bgcolor="#101463">
<tr>
<td><form name="login" method="post" action="https://sysconf.webland.ch/kunden.aspx" target="_blank">
<table width="100%" cellpadding="5" cellspacing="0" bgcolor="#FFFFFF">
<tr>
<td colspan="2"><font face="Verdana, Arial, Helvetica, sans-serif" color="#000000"
size="1"><strong>Kunden-Login</strong><font></td>
</tr>
<tr>
<td colspan="2"><input type="text" name="username" value="" size=25 style='{width:144px;fontsize:9px;border:2px solid inset}'></td>
</tr>
<tr>
<td colspan="2"><font face="Verdana, Arial, Helvetica, sans-serif" color="#000000" size="1">^
Kundennummer <font></td>
</tr>
<tr>
<td colspan="2"><input type="password" name="password" value="" size=25 style='{width:144px;fontsize:9px;border:2px solid inset}'></td>
</tr>
<tr>
<td valign="top"><font face="Verdana, Arial, Helvetica, sans-serif" color="#000000" size="1">^
Passwort<font></td>
<td><div align="right">
<input type="submit" name="Submit" value="Login">
&nbsp;</div></td>
205
Manual
</tr>
</table>
</form></td>
</tr>
</table>
206
Manual
Graphical input mask "Domain-Login"
<table width="173" border="0" align="center" cellpadding="0" cellspacing="0">
<tr>
<td><img src="http://help.sysconf.webland.ch/img/systemconfigurator.gif" width=173 height=18 border=0
alt=""></td>
</tr>
<tr>
<td><table width="173" border="0" cellpadding="0" cellspacing="0"
background="http://help.sysconf.webland.ch/img/systemconfigurator_bgtable.gif">
<form name="login" method="post" action="https://sysconf.webland.ch/domain.aspx" target="_blank">
<tr>
<td colspan="3" align="left"><img src="http://help.sysconf.webland.ch/img/nix.gif" width="173"
height="5"></td>
</tr>
<tr>
<td align="left"><img src="http://help.sysconf.webland.ch/img/nix.gif" width="16" height="10"></td>
<td><img src="http://help.sysconf.webland.ch/img/systemconfigurator_dl.gif" width=110 height=17 border=0
alt="Domainname eingeben."></td>
<td align="right">&nbsp;</td>
</tr>
<tr>
<td colspan="3" align="left"><img src="http://help.sysconf.webland.ch/img/nix.gif" width="173"
height="5"></td>
</tr>
<tr>
<td align="left"><img src="http://help.sysconf.webland.ch/img/nix.gif" width="10" height="10"></td>
<td><input type="text" name="username" value="" size=25 style='{width:144px;font-size:9px;border:2px
solid inset}'></td>
<td align="right">&nbsp;</td>
</tr>
<tr>
<td colspan="3" align="left"><img src="http://help.sysconf.webland.ch/img/nix.gif" width="173"
height="5"></td>
</tr>
207
Manual
<tr>
<td align="left">&nbsp;</td>
<td><img src="http://help.sysconf.webland.ch/img/systemconfigurator_dn.gif" width=110 height=17
border=0 alt="Domainname eingeben."></td>
<td align="right">&nbsp;</td>
</tr>
<tr>
<td colspan="3" align="left"><img src="http://help.sysconf.webland.ch/img/nix.gif" width="173"
height="5"></td>
</tr>
<tr>
<td align="left"><img src="http://help.sysconf.webland.ch/img/nix.gif" width="10" height="10"></td>
<td><input type="password" name="password" value="" size=25 style='{width:144px;fontsize:9px;border:2px solid inset}'></td>
<td align="right">&nbsp;</td>
</tr>
<tr>
<td colspan="3" align="left"><img src="http://help.sysconf.webland.ch/img/nix.gif" width="173"
height="5"></td>
</tr>
<tr>
<td align="left">&nbsp;</td>
<td><img src="http://help.sysconf.webland.ch/img/systemconfigurator_pw.gif" width=90 height=17 border=0
alt="Passwort eingeben.">
<input type="image" name="submit" src="http://help.sysconf.webland.ch/img/systemconfigurator_login.gif"
width=49 height=17
border=0 alt="GO"></td>
<td align="right">&nbsp;</td>
</tr>
<tr>
<td colspan="3" align="left"><img src="http://help.sysconf.webland.ch/img/systemconfigurator_bottom.gif"
width="173" height="4"></td>
</tr>
</form>
</table></td>
</tr>
</table>
208
Manual
Text-based input mask "Domain-Login"
<table width="173" align="center" cellpadding="3" cellspacing="0" bgcolor="#101463">
<tr>
<td><font
face="Verdana,
Arial,
Helvetica,
sans-serif"
color="#ffffff"
size="1"><strong>System
Configurator</strong><font></td>
</tr>
</table>
<table width="173" align="center" cellpadding="1" cellspacing="0" bgcolor="#101463">
<tr>
<td><form name="login" method="post" action="https://sysconf.webland.ch/domain.aspx" target="_blank">
<table width="100%" cellpadding="5" cellspacing="0" bgcolor="#FFFFFF">
<tr>
<td
colspan="2"><font
face="Verdana,
Arial,
Helvetica,
sans-serif"
color="#000000"
size="1"><strong>Domain-Login</strong><font></td>
</tr>
<tr>
<td
colspan="2"><input
type="text"
name="username"
value=""
size=25
style='{width:144px;font-
size:9px;border:2px solid inset}'></td>
</tr>
<tr>
<td colspan="2"><font face="Verdana, Arial, Helvetica, sans-serif" color="#000000" size="1">^ Domainname
<font></td>
</tr>
<tr>
<td colspan="2"><input type="password" name="password" value="" size=25 style='{width:144px;fontsize:9px;border:2px solid inset}'></td>
</tr>
<tr>
<td
valign="top"><font
face="Verdana,
Arial,
Helvetica,
Passwort<font></td>
<td><div align="right">
<input type="submit" name="Submit" value="Login">
&nbsp;</div></td>
209
sans-serif"
color="#000000"
size="1">^
Manual
</tr>
</table>
</form></td>
</tr>
</table>
210
Manual
Copyright © Webland AG 2014
211

Similar documents

×

Report this document