Final Exam Sample Test

Document technical information

Format pdf
Size 435.2 kB
First found Jun 9, 2017

Document content analysis

Language
English
Type
not defined
Concepts
no text concepts found

Persons

Organizations

Places

Transcript

Final Exam Sample Test
MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question.
1) After the following Dim statement is executed, how many subscripted variables called myvar(i) will 1)
be available?
Dim myVar(7) As Double
A) 0
B) 1
C) 8
D) 9
2) What names are displayed in the list box when the button is clicked?
Private Sub btnDisplay_Click(...) Handles
btnDisplay.Click Dim name(4) As String
Dim sr As IO.StreamReader =
IO.File.OpenText("DATA.TXT") For i As Integer = 0 To 4
name(i) =
sr.ReadLine Next
sr.Close()
lstBox.Items.Clear()
For i As Integer = 4 To 0 Step 2 lstBox.Items.Add(name(i))
Next
End Sub
Assume the five lines of the file DATA.TXT contain the following entries: Bach, Borodin,
Brahms, Beethoven, Britain.
A) Britain, Brahms, and Bach
B) Britain, Beethoven, Brahms, Borodin, and Bach
C) Bach, Borodin, Brahms, Beethoven, and Britain
D) Bach, Brahms, and Britain
2)
3) What is the output of the following program segment?
Dim numbers(3) As Double, h As Double = 0
Dim sr As IO.StreamReader =
IO.File.OpenText("DATA.TXT") For i As Integer = 0 To 3
numbers(i) =
CDbl(sr.ReadLine) Next
sr.Close()
For k As Integer = 0 to
3 h += numbers(k)
Next
txtBox.Text = CStr(h)
Assume the four rows of the file DATA.TXT contain the following entries: 2, 4, 2, 3
A) 11
B) 2
C) 4
D) 7
3)
1
4) Given the Dim statement below, which set of statements will initialize all elements of myArray() to 100? 4)
Dim myArray(100) As Double
A) For i = 0 To 100
(i) =
100 Next
B) myArray() is already initialized to 100 by the Dim
statement. C) For j = 0 to 100
myArray(j) =
100 Next
D) myArray = 100
5) What is the output of the following program segment?
Dim antonym(7) As String
Dim sr As IO.StreamReader = IO.File.OpenText("DATA.TXT")
For i As Integer = 0 To 6 Step 2
antonym(i) = sr.ReadLine
antonym(i + 1) = sr.ReadLine
Next
sr.Close()
txtBox.Text = antonym(3)
Assume the twelve rows of the file DATA.TXT contain the following entries: big, small,
black, white, old, young, fast, slow, tall, short, hard, soft.
A) white
B) black
C) small
D) Subscript out of range
5)
6) Each individual variable in the list
6)
student(0), student(1), student(2)
is known as a(n)
A) type.
B) dimension.
C) element.
D) subscript.
7) The ReDim statement causes an array to lose its current contents unless the word ReDim is
followed by the keyword
A) MyBase
B) CInt
C) Add
D) Preserve
7)
8) The GetUpperBound(0) function returns what information about an array?
A) the highest dimension of the array
B) the largest value that can be assigned to an array element
C) the highest number that can be used as a subscript for the array
D) the number of elements in the array
8)
TRUE/FALSE. Write 'T' if the statement is true and 'F' if the statement is false.
9) If the following statement appears in a program, the array score() must have been declared using
the String data type.
score(1)
=
9)
87
10) Like other variables, array variables can be declared and assigned initial values at the same time.
10)
11) If you use the ReDim statement to make an array smaller than it was, data in the eliminated
elements can be retrieved by using the Preserve keyword.
11)
2
12) The following statements are valid. (T/F)'
x
=
CInt(InputBox("Enter
ReDim
myArray(x
-
number
12)
of
items
to
be
processed:"))
1)
SHORT ANSWER. Write the word or phrase that best completes each statement or answers the question.
13) Consider the following Visual Basic statements:
Dim
nums(4)
As
13)
Double
For index As Integer = 0 To
nums(index) = 1 + (index *
4
2)
Next
What values are placed in the array by the above statements? (Show each element of the
array and the value for that element.)
14) What will be the size of the array stones() after the following two lines of code are
executed?
Dim
stones()
ReDim
As
Preserve
String
=
{"Watts",
"Jagger",
"Wood",
14)
"Richards"}
stones(10)
MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question.
j
15) What is the value of after the following code segment has been executed?
15)
Dim state(49) As String, j as Integer
'Assume that the data file STATES.TXT contains
'the names of the 50 states of the United States
'in the order they were admitted to the union.
Dim sr As IO.StreamReader = IO.File.OpenText("STATES.TXT")
j = 0
Do While sr.Peek <> -1
state(j) = sr.ReadLine
j += 1
Loop
sr.Close()
For i As Integer = 0 to state.GetUpperBound(0)
lstBox.Items.Add( "State Number " & i + 1 & " is " & state(i))
Next
A) 48
C) 50
B) 49
D) Unable to determine
16) Which of the following is NOT an example of an ordered array?
A) num()
457
457
457
458
B) years()
1877
1944
2011
4301
C) cities()
Selah
Wapato
Yakima
Zillah
Bush Prairie
Dollars Corner
Battle Ground
D) nbrhoods()
Hockinson
3
16)
17) In the ordered array declared with the statement below, the value of the element namfriend(0) is
equal to that of which of the other following elements?
Dim namfriend() As String = {"Fred", "Fred", "fred", "fred"}
A) namfriend(1
B) namfriend(2)
C) namfriend(3)
D) namfriend(4)
17)
TRUE/FALSE. Write 'T' if the statement is true and 'F' if the statement is false.
18) Arrays are said to be ordered only if the values are in ascending order.
18)
19) The statement
19)
Dim newlist(10) As String
is used to declare a variable where each element has the value of 10.
20) In the line of code
Function Sum(ByVal score() As Integer) As Integer
20)
the pair of parentheses that follows score can be removed.
21) In the line of code
Dim score() As Integer = {55, 33,
12} the upper bound of the array score() is 12.
21)
22) Beginning with the first element of an ordered list and searching successive elements is known as a 22)
sequential search.
MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question.
23) Consider the following structure definition. Which Dim statement would correctly declare an array 23)
of this structure for elements having subscripts from 0 through 30?
Structure carType
Dim yr As Integer
Dim make As String
Dim model As String
End Structure
A) You cannot have an array of structures.
C) Dim
car(30)
As
carType
B) Dim
carType(30)
D) Dim
carType(30)
As
car
24) Each of the following statements declares a control array except one. Which of the following
statements does not create a control array?
A) Dim txtNumber(8) As TextBox
B) Dim btnAmount() As Button
C) Dim
lblTitle(10)
As
D) Dim
Label
score(5)
As
Integer
25) A program contains a form (Form1) with four text boxes (TextBox1, TextBox2, TextBox3, and
TextBox4) and a button. The line
Dim txtBox(3) As TextBox
is placed in the Declarations section of the Code window. This code makes txtBox(3) available
to which of the following?
A) all of the form's procedures
B) TextBox3's event procedures only
C) the three textboxes's event procedures only
D) the button's event procedures only
4
24)
25)
26) Suppose a structure is created with the code
Structure stateUSA
Dim capCity As String
Dim stateNum As Integer
End Structure
in the Declarations section of the Code editor. Which of the following statements correctly
declares a variable of type stateWA?
A) Dim stateWA As Structure
B) Dim stateWA As stateUSA
C) Dim stateWA
As
D) Dim stateUSA
Member
As
26)
stateWA
27) A program contains a form (Form1) with three text boxes (TextBox1, TextBox2, and TextBox3) and
a button The line
27)
Dim txtBox(2) As TextBox
is placed in the Declarations section of the Code window. The three
lines txtBox(0) = TextBox1
txtBox(1) = TextBox2
txtBox(2) = TextBox3
are placed in the Form1_Load procedure for this program. The button's click event
procedure contains the code
For lpNum As Integer = 0 To 2
txtBox(lpNum).Text = "Value is " & lpNum + 1
Next
What output will be displayed in txtBox(1) when the button is clicked?
A) Value is lpNum
B) Value is 2
C) 2
D) Value is 1
TRUE/FALSE. Write 'T' if the statement is true and 'F' if the statement is false.
28) A program contains a form (Form1) with three textboxes (TextBox1, TextBox2, and TextBox3). The
line
28)
Dim txtBox(3) As TextBox
is placed in the Declarations section of the Code window. The three
lines txtBox(3) = TextBox1
txtBox(1) = TextBox2
txtBox(2) = TextBox3
are placed in the Form1_Load procedure for this program. This code will cause an error because
the numbers of the subscripted control array elements do not match up to the numbers at the
end of the default text box names.
29) Suppose a structure is created with the code
Structure stateUSA
Dim capCity As String
Dim yearFounded As
Integer End Structure
in the Declarations section of the Code window. In this structure, the variable capCity is known
as a member.
29)
30) A structure can contain members that are simple variables only; members cannot be arrays.
30)
5
MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question.
31) How many comparisons will be made in the first pass of a bubble sort of 6 items?
A) 4
B) 6
C) 5
D) depends on the elements to be sorted
31)
32) From the following list of unsorted items, how many passes of a bubble sort are required to sort the 32)
list in ascending order?
Groucho
Harpo
Zeppo
Chico
Gummo
A) 1
B) 2
C) 3
D) 4
33) The Shell sort is so named because
A) it resembles the familiar carnival game that moves a pea back and forth under walnut shells.
B) it works through successive layers (shells) of unsorted data.
C) it was invented by Donald Shell.
D) None of the above
33)
34) Assume a binary search is looking for "Mankato" in the following list. Which city would be
compared with "Mankato" first?
Akron
Hartford
Ithaca
Seattle
Tulsa
A) Seattle
B) Hartford
C) Akron
D) Tulsa
E) Ithaca
34)
35) Each of the following represents a step in the bubble sort algorithm except one. Which of the
following is not a step used in a pass through a list by the bubble sort algorithm?
A) Compare the first and last items. If they are in the wrong order, swap them.
B) On the final comparison of the first pass, the possible swap is between the next-to-last
and last items.
C) Compare the second and third items. If they are in the wrong order, swap them.
D) Compare the first and second items. If they are in the wrong order, swap them.
35)
36) When using the bubble sort algorithm, after the first pass through the list, which of the following
will be true?
A) The first item only is guaranteed to be in its proper position.
B) The last two items are guaranteed to be in their proper positions.
C) The last item only is guaranteed to be in its proper position.
D) The first two items are guaranteed to be in their proper positions.
36)
TRUE/FALSE. Write 'T' if the statement is true and 'F' if the statement is false.
37) A binary search searches an ordered list by successively dividing the list in halves until the item
searched for is found or determined to be not present.
37)
38) Both the bubble sort and the Shell sort require the interchanging of values stored in a pair of
variables.
38)
39) When using the bubble sort algorithm, only lists containing data of the String type can be correctly
ordered.
39)
40) The Shell sort algorithm, which compares distant items first and works its way down to nearby
items, is more efficient than the bubble sort algorithm.
40)
6
41) The bubble sort is usually faster than the Shell sort.
41)
42) A binary search that begins in the middle of a list does not require the data to be in any order.
42)
43) Although three assignment statements can be used to swap a pair of array elements, three
43)
assignment statements alone cannot swap all the items in one array with all of the items in another
array.
SHORT ANSWER. Write the word or phrase that best completes each statement or answers the question.
44) Use the following array, age(), and assume the bubble sort is used to sort the array from
smallest to largest: age(0)=16, age(1)=3, age(2)=21, age(3)=43,age(4)=2, age(5)=16,
age(6)=32.
(a) What is the contents of the array after one pass?
(b) What is the contents of the array after two passes?
(c) What is the contents of the array after three passes?
44)
45) Given an array of size 10 with the following ten values stored in order 1.8, 2.9, 4.7, 9.3,
45)
10.1, 13.6, 17.4, 19.2, 21.5, 23.3 you want to perform a binary search for the value 4.7. What
are the successive values of First, Last, and Middle as determined when performing
this search? (Fill in the table below until the search is completed.)
First
0
Middle
Last
9
MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question.
46) Assume the array b() has been filled as shown. What is the output of the following program
segment?
A) 64
B) 12
C) 25
D) 13
E) None of the above
7
46)
47) Which of the following types of variables is capable of holding the information contained in a table 47)
that has four rows and four columns?
A) single-subscripted variables
B) simple variables
C) double-subscripted variables
D) one-dimensional arrays
48) Which of the following types of variables can only hold a single item of data?
A) two-dimensional arrays
B) single-subscripted variables
C) simple variables
D) double-subscripted variables
49) Which of the following declarations can be used to create a three-dimensional array?
A) Dim newVar(2, 2, 2) As Double
B) Dim newVar(3, 3) As
C) Dim
newVar(3)
As
D) Dim
Double
newVar(3)
As
48)
49)
Double
TextBox
TRUE/FALSE. Write 'T' if the statement is true and 'F' if the statement is false.
50) Arrays that are capable of holding the contents of a table with several rows and columns, are
known as two-dimensional arrays or double subscripted variables.
50)
51) The statement
51)
Dim nextVar(3, 5) As Double
declares a two-dimensional array that can store a table containing 4 columns and 6 rows of
numeric data.
52) A two-dimensional array can be declared and initialized at the same time.
52)
53) In the two-dimensional array declaration
53)
Dim newVar(,) As Double = {{1,
the comma in newVar(,) can be removed.
2,
3},
{4,
5,
2054},
{6,
802,
2786}}
54) Variable arrays can only be one- or two-dimensional.
54)
55) ReDim statements can be used to change a one-dimensional array into a three-dimensional array.
55)
56) Given the following statements, the first subscript in the second statement references the column.
Dim myArray(15, 20) As Double
56)
myArray(5,
10)
=
0
MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question.
57) Opening a file for output means that
A) data may be read from and stored onto the disk.
B) data may be stored onto the disk.
C) anything that appears as output on the screen is written to the disk.
D) data may be read from the disk.
57)
58) When a file is opened for Append,
58)
A) data may be read starting at the beginning of the file.
B) data written to the file replaces the data already there.
C) data written to the file are added at the end of the file.
D) data written to the file are inserted at the beginning of the file.
8
59) Assume the file ALPHABET.TXT contains 26 records, the lowercase letters of the alphabet in 59) ascending
order. What happens when the following code is executed?
Dim letter As String
Dim sr As IO.StreamReader =
IO.File.OpenText("ALPHABET.TXT") Do While sr.Peek <> -1
letter = sr.ReadLine
Dim sw As IO.StreamWriter = IO.File.CreateText(letter.ToUpper
& ".TXT")
sw.WriteLine(letter.ToUpper &
".TXT") sw.Close()
Loop
sr.Close()
A) A file called z is created containing all of the letters of the alphabet in lowercase.
B) Twenty-six files are created and named with one of the uppercase letters of the alphabet
and each containing only its own file name.
C) An "invalid file name" error is produced.
D) A "too many files open" error is produced.
60) Which of the following is an example of how a filespec for a sequential file would be written within
a Visual Basic application?
A) "C\TEXT FILES\INCOME DATA.TXT"
B) C:\TEXT FILES\INCOME DATA.TXT
C) "C:\TEXT FILES\INCOME DATA.*"
D) "C:\TEXT FILES\INCOME DATA.TXT"
60)
61) Which of the terms in the following line of code are named variables that could be replaced as long
as all other references were also updated?
sr = IO.File.OpenText(fileName)
A) IO
B) fileName
C) OpenText
D) File
61)
62) If a sequential file is opened for input, then this allows
A) data to be deleted from the file.
B) data to be appended to the end of the file by the Visual Basic application.
C) data to be placed into the file by the Visual Basic application.
D) data that is in the file to be used in the Visual Basic application.
62)
63) Which one of the following is NOT an example of a bug?
A) accessing the wrong property value
B) typos
C) viruses
D) using an incorrect formula
63)
64) When an exception is generated by a Visual Basic application, the default exception handler will
A) restart the program.
B) continue to execute the program.
C) terminate the program.
D) display a dialog box that asks the user if they wish to restart the computer.
64)
65) Which of the following exceptions will be generated by trying to access a disk drive that doesn't
contain a disk?
A) OverflowException
B) IndexOutOfRangeException
C) NullReferenceException
D) IO.DirectoryNotFoundException
9
65)
66) The code for an application tests to see if a file exists using the following line in the Try block:
IO.File.Exists(fileName)
The first catch block is written as follows:
Catch exc As IO.IOException
This catch block is meant to handle which of the following exceptions?
A) an exception generated by deleting or renaming an open file
B) an exception generated by attempting to access a file within a folder that is missing
C) an exception generated by attempting to access a file that is missing
D) any exception that hasn't been handled by the Try block
66)
TRUE/FALSE. Write 'T' if the statement is true and 'F' if the statement is false.
67) To get rid of an existing file, execute a statement of the form IO.File.Delete(filespec).
67)
68) When a text file is created in Visual Basic using a StreamWriter, the extension .TXT is automatically 68)
added to the file name if no other extension is specified.
69) If an existing sequential file is opened for output, the computer will append any new data to the
end of this existing file.
69)
70) An individual item of a sequential file cannot be changed or deleted directly.
70)
71) In a Try-Catch-Finally block, the clause in the first listed Catch block is considered if an exception
is thrown in the Try block.
71)
72) In the line of code
sw = IO.File.CreateText(fileName)
72)
sw is a variable that holds the value of a filespec for an existing sequential file.
73) A Catch block of code that is initiated by the keyword Catch and doesn't contain any additional
clause will execute regardless of whether an exception occurred.
73)
74) If an attempt is made to access a missing file within an existing folder using the OpenText method, 74)
the IO.DirectoryNotFoundException will be thrown.
SHORT ANSWER. Write the word or phrase that best completes each statement or answers the question.
75) Give three different file modes that Visual Basic allows you to use when accessing a file?
75)
MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question.
76) Which of the tasks is the Split function used to complete in the following code?
Dim words() As String
words = line.Split(","c)
A) Split adds a comma delimiter between all items of text in the given line.
B) Split parses or separates out all items of text that are delimited by a c in the given line.
C) Split parses or separates out all items of text that are delimited by a comma in the given line.
D) Split adds a comma followed by a c to the end of the given line.
10
76)
77) Which of the tasks is the Join function used to complete in the following statement?
Dim line As String
line = Join(strArrData, ",")
A) Join parses or separates out all items of text that are delimited by a comma in line.
B) Join concatenates the values of all elements of the array strArrData, and adds a
comma delimiter between successive values.
C) Join concatenates the values of all elements of line, and adds a comma to the end of the line.
D) Join parses or separates out all items of text that are delimited by a comma in strArrData.
77)
78) In an application that merges sequential files without duplications, which of the following lines of
code would be used to open a file for output?
A) Dim sr1 As IO.StreamReader = IO.File.OpenText(file3)
B) Dim sw As IO.StreamWriter = IO.File.CreateText(file3)
C) file3 = txtDataMerged.Text
78)
D) data1
=
CDbl(sr1.ReadLine)
79) When merging sequential files without duplications, the last step in any algorithm should be to
complete which of the following tasks?
A) Delete all items of data that remain in the ordered files once the files have been merged.
B) Index all opened files.
C) After there is no longer data in one of the ordered files, write out all remaining data in
the other file.
D) Close all opened files.
80) Control break processing means which of the following?
79)
80)
A) a program that processes data based on a variable scope
B) a program that processes data based on a variable type
C) a program that processes data based on a change to the value of a variable
D) a program that processes data based on a variable that maintains a constant value
81) Identify the control variable in the following code block.
Dim loopStart As Integer =
1 Dim message As String
Dim loopContinue As Integer =
1 Do While loopContinue <= 3
message = "The number is " &
loopContinue MessageBox.Show(message)
loopContinue +=
loopStart Loop
A) loopStart
B) loopContinue
81)
C) message
D) Integer
TRUE/FALSE. Write 'T' if the statement is true and 'F' if the statement is false.
82) The Trim function is often used with the output of a Split function to delete extraneous spaces.
82)
83) In the following statement, the term Join is used to concatenate the data contained in the array
outputLine() into one comma delimited line that can be placed in a sequential file.
83)
sw.WriteLine(Join(outputLine,
","))
84) Sequential files must always be opened, processed, and closed within a single procedure.
11
84)
MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question.
85) Which of the following statements will remove all items from the list box?
A) lstBox.Clear()
B) For i As Integer = 1 to lstBox.Items.Count
lstBox.Items.RemoveAt(i)
Next
C) lstBox.Items.Clear()
85)
D) lstBox.Items.RemoveAll
86) The following statement will insert str into the list box at the proper sorted position and assign to
num the index of that position provided that one of the following has also occurred. Which one of
these properties must also have been set to allow the statement to complete the described tasks?
num = lstbox.Items.Add(str)
A) The Sorted property of the list box has been set to Alphabetical.
B) The Sorted property of the list box has been set to True.
C) The Sorted property of the list box has been set to False.
D) The Count property of the list box has been set to Sorted.
86)
87) A list box named lstBox has its Sorted property set to False and contains the three items Cat, Dog, 87)
and Gnu in its list. If the word Elephant is added to the list at runtime, what will be its index value?
A) 1
B) 2
C) 0
D) 3
88) Which of the following controls has a drop down arrow and an attached text box that allows users 88)
to type selections?
A) Simple ComboBox
B) ListBox
C) DropDown ComboBox
D) DropDownList ComboBox
89) The following statement causes the Open dialog box to become visible on the form.
89)
OpenFileDialog1.ShowDialog()
After a file has been selected and the Open button is pressed, the value of
OpenFileDialog1.FileName
will be the file's filespec; this will include all of the following except
A) the file's extension.
B) the file's drive.
C) the file's path.
D) the file's date of creation.
TRUE/FALSE. Write 'T' if the statement is true and 'F' if the statement is false.
90) Assume lstBox has its Sorted property set to True. After the following statement is executed, the
90)
value of the Integer variable num is the index of the position in the list where "Hello" was inserted.
num
=
lstBox.Items.Add("Hello")
91) The following lines of code display all the items of lstBox.
91)
For n As Integer = 1 to lstBox.Items.Count
lstBox2.Items.Add(lstBox.Items(n))
Next
92) In a Simple combo box, the list is always visible.
92)
93) If no item in a combo box is selected, the value of lstBox.SelectedIndex is 0.
93)
12
94) The value of cboBox.Text is the currently highlighted item.
94)
95) For a list box named lstBox, the following statement will delete the first occurrence of the value of
95)
num from its list.
lstBox.Items.RemoveAt(num)
96) With a simple combo box, the list drops down when the user clicks on the arrow and then
disappears after a selection is made.
96)
97) The DropDownStyle property of a combo box must be set at design time.
97)
98) Combo boxes have most of the same properties, events, and methods as list boxes.
98)
99) In order to use the OpenFileDialog control, the programmer must first change its Name property to 99)
something other than the default OpenFileDialog1.
100) The following statement could be used to set the Filter property of the OpenFileDialog control so
that it displays files with the .TXT extension.
Text
Files
100)
(*.TXT)|(.TXT)
MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question.
101) Which of the following techniques does NOT always toggle the checked and unchecked state of a
check box control?
A) Press Alt+Access key (if an access key has been specified).
B) Set the Checked property equal to 1.
C) Press the spacebar when the square has the focus.
D) Click on the square or its caption with the mouse.
101)
102) For a scroll bar, the value of the Value property is
102)
A) a number between the values of the Minimum and Maximum properties.
B) a number between the values of the SmallChange and LargeChange properties.
C) true or false.
D) any number.
103) To move the scroll box of a scroll bar a large distance
103)
A) click on the bar between the scroll box and the furthermost arrow.
B) It can only be moved by writing code.
C) click on the scroll box.
D) click on the furthermost arrow button.
104) When a check box is checked, the value of the Checked property will be
A) False.
B) True.
C) 0.
D) 1.
105) Which of the following methods is used to load a new picture into a picture box control?
A) picBox.Picture = LoadPicture(filespec)
B) picBox.Image = Image.FromFile(filespec)
C) picBox.Picture = filespec
D) picBox.Image = filespec
13
104)
105)
106) Which of the following controls is not used to select an item from a list?
A) ComboBox
B) OpenFileDialog
C) List Box
D) Timer Control
106)
107) A check box control named chkFirst contains the following code in its CheckedChanged event
procedure. Which of the following is true concerning the use of this control?
Dim message As String = "hello"
MessageBox.Show(message)
107)
A) The message "hello" will appear when the user checks the control but not when it
is unchecked.
B) The message "hello" will appear when the user checks the control and again when it
is unchecked.
C) The message "hello" will appear when the user unchecks the control but not when it
is checked.
D) The message "hello" will not appear using this source code.
108) Suppose there are four radio button controls attached to a group box control on a form. How many 108) radio
buttons can be selected (that is, be "on") at any given time?
A) 4
B) 1
C) 2
D) 3
109) In the following statement which term is used to designate the distance (in pixels) from the left side 109)
of the picture box to the left side of the rectangle?
picBox.CreateGraphics.DrawRectangle(Pens.Blue, x, y, w, h)
A) w
B) x
C) y
D) h
110) A form contains a horizontal scroll bar control named hsbXpos, and the statement lblFace.Top
110)
= hsbXpos.Value is placed inside the hsbXpos.Scroll event procedure (where lblFace identifies a
label on the form, and the hsbXpos's Minimum and Maximum properties are set at their
default values). What will happen when the hsbXpos.Scroll event is triggered by moving the
scroll bar's scroll box to the right?
A) lblFace will move to the left.
B) lblFace will move to the
right. D) lblFace will move up.
C) lblFace will move down.
TRUE/FALSE. Write 'T' if the statement is true and 'F' if the statement is false.
111) With a check box control, toggling the state of the small square triggers the CheckChanged event.
111)
112) With a scroll bar control, the default values of the Minimum and Maximum properties are 1 and
100 respectively.
112)
113) When the SizeMode property of a picture box control is set to StretchImage, a picture placed in the
control will be resized to fit the picture control.
113)
114) The main properties of a scroll bar are set in millimeters.
114)
115) If you set a group box control's Visible property to False, the attached controls will still remain
visible.
115)
116) When a check box control has focus, the spacebar can be used to invoke its CheckedChanged event.
116)
14
117) The timer control is invisible during run time.
117)
118) The following statement can be used to assign the PLANE.BMP image to the picBox picture box
control at runtime.
118)
picBox.Image
=
"plane.bmp"
MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question.
119) The Clipboard object is used for all of the following except which one?
A) Paste text from the Clipboard.
B) Clear the screen.
C) Clear the Clipboard.
D) Copy text to the Clipboard.
119)
120) The correct code for replacing the selected text in txtBox with the contents of the Clipboard is
A) txtBox.SelectedText = Clipboard
B) txtBox.SelectedText = Clipboard.SetText
C) txtBox.SelectedText = Clipboard.GetText
D) txtBox.SelectedText = Clipboard.Text
120)
121) What expression should be used to generate random numbers from the set 2, 3, 4, 5, 6, 7? (Assume 121)
that the statement Dim randomNum As New Random() has been executed.)
A) randomNum.Next(1, 8)
B) randomNum.Next(1, 7)
C) randomNum.Next(2,
D) randomNum.Next(2,
7)
122) MenuStrip controls respond to which one of the following events?
A) Double
B) Click
C) Load
8)
D) Change
122)
123) The term modal refers to
A) the ability to reposition a form at run time.
B) the BorderStyle property is set to "3-Fixed Double."
C) the user not being allowed to shift the focus to any other form until the displayed modal
form is hidden.
D) the ability to display more than one form at one time.
123)
124) A form contains a text box named txtBox and a button named btnClip. The statement
124)
Clipboard.SetText("") is placed inside btnClip's Click event procedure. At run time, what
will be placed into the Clipboard if the user enters the word "Hello" into txtBox and then clicks on
btnClip,?
A) The Clipboard will be emptied of all contents.
B) the word "Hello"
C) the word "btnClip"
D) the word "txtBox"
125) The statement Dim secondForm As New Form2() is used to do which of the following?
A) Cause secondForm to appear.
B) Declare secondForm as an instance of the Form2 class.
C) Set the focus to secondForm.
D) Place the text "Form2" in the title bar of secondForm.
125)
TRUE/FALSE. Write 'T' if the statement is true and 'F' if the statement is false.
126) Pressing Ctrl+V with the cursor in a text box inserts the contents of the Clipboard at the cursor
position.
15
126)
127) Menus are designed with the MenuStrip control invoked from the Toolbar.
127)
128) When working with multiple forms, only one form can be visible at one time.
128)
129) A modal form cannot lose the focus until the form disappears.
129)
130) A random number generator object can be declared with the following statement.
130)
Dim
rndNum
As
New
Random()
131) When working with the MenuStrip control, the programmer is not allowed to set up access keys by
placing an ampersand in front of a character of text.
131)
MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question.
In the following exercises assume the statement Dim gr As Graphics = picOutput.CreateGraphics has
been executed.
132) What is the effect of the statement gr.DrawString("Hello",
Me.Font,
Brushes.Blue,
132)
50, 60)?
A) Display the word Hello beginning 50 pixels from the left side of the picture box.
B) Display the word Hello with the top of the word 60 pixels from the top of the picture box.
C) Display the word Hello in blue.
D) All of the above
133) Give a statement that displays the value of the string variable strVar with yellow letters.
A) gr.DrawString(strVar,
B) gr.DrawString(strVar,
C) gr.DrawString(strVar,
D) gr.DrawString(strVar,
Me.Font,
Me.Font,
Me.Font,
Me.Font,
133)
Yellow, 50, 50)
Color.Yellow, 50, 60)
Pens.Yellow, 50, 60)
Brushes.Yellow, 50, 60)
134) Give a statement that draws a red diagonal from the upper-left corner of the picture box to the 134) lowerright corner.
A) gr.DrawLine(Pens.Red, picOutput.Width, 0, 0, picOutput.Height)
B) gr.DrawLine(Pens.Red, 0, 0, picOutput.Width, picOutput.Height)
C) gr.DrawLine(Pens.Red, 0, 0, picOutput.Height, picOutput.Width)
D) gr.DrawLine(Color.Red, 0, 0, picOutput.Width, picOutput.Height)
135) The distance from the top of the picture box to the top of the circle drawn by the statement
gr.DrawEllipse(Brushes.Red, 10, 20, 40, 40) is.
A) 80 pixels
B) 10 pixels
C) 40 pixels
D) 20 pixels
135)
136) Give a statement that deletes all graphics and text from picOutput.
A) picOutput.Delete()
B) picOutput.Refresh()
136)
C) picOutput.Clear()
D) picOutput.Text
=
""
TRUE/FALSE. Write 'T' if the statement is true and 'F' if the statement is false.
137) The statements gr.DrawLine(Pens.Red,
0,
0,
40,
0,
0,
30) draw lines of the same length.
16
30,
40) and gr.DrawLine(Pens.Red,
137)
138) The statement gr.FillRectangle(Brushes.Red,
rectangle of width 40 pixels.
10,
20,
30,
40) draws a solid
138)
139) The sector of a circle with sweep angle 90 consists of a-quarter of the circle.
139)
140) Animation can be produced by placing an image in a picture box and moving the picture box.
140)
141) The statement Dim
141)
pn
142) The pair of statements
Dim fnt As Font
As
Pen
=
Pens.Blue is valid.
142)
=
New
Font("Times
New
Roman",
12)
Gr.DrawString("Hello", fnt, Brushes.Blue,10,10)
Displays the word Hello in 12-point Times New Roman font.
MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question.
143) A rectangular array of data is called a
A) field.
C) database management system.
143)
B) table.
D) record.
144) Each row in a table is also called a(n)
A) selection.
B) field.
144)
C) array.
D) record.
145) Which property should be used to bind a list box to a data table?
A) The Items property of the list box.
B) The DataSource property of the list box.
C) The DataSource property of the data table.
D) The Bound property of the list box.
145)
146) Which of the following is a collection of one or more (usually related) rectangular arrays of data?
A) a field
B) a database
C) a record
D) a table
146)
TRUE/FALSE. Write 'T' if the statement is true and 'F' if the statement is false.
147) Each entry of a field of a table must contain some information.
147)
148) The management of databases is the number one use of computers today.
148)
149) DataBase Explorer is used to browse through all parts of a database.
149)
150) If dt is a DataTable object, then the value of
dt.Columns.Count
is the number of records in the table.
150)
151) A list box can be bound or connected directly to a data table.
151)
17
MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question.
152) What is a primary key?
A) a field that uniquely identifies each record
B) the largest field in every record
C) the first field in every record
D) the first field specified when a table is created
152)
153) SQL is an abbreviation for
A) Structured Query Language.
C) Simple Query Language.
B) Standard Query Language.
D) None of the above
153)
154) A virtual table is also called a(n)
A) hierarchy table.
B) view.
C) appendix.
D) standard table.
154)
155) Which one of the following statements is true about primary keys?
A) Only a single record can be used as a primary key.
B) A column of names is usually a good choice for use as a primary key.
C) A primary key is used to uniquely identify records in a table.
D) Social Security numbers are never used as a primary key.
155)
156) Which of the following terms is defined as two or more interdependent tables?
A) join
B) Rule of Referential Integrity
C) SQL
D) relational database
156)
157) The error message
You cannot add or change a record because a related record is
required in table 'Countries'.
will be generated by attempting which of the following with the MEGACITIES database?
A) The user tries to request a joined table using the SQL language.
B) A user tries to enter a record in the table Countries that doesn't contain data in the
primary key.
C) A user tries to enter a record to the table Countries with the same primary key as
another record.
D) A user tries to add a record to a table that is related to the Countries table, and that record
contains a foreign key value that does not correspond to a primary key value in the
Countries table.
157)
18
158) The error message
The changes you requested to the table were not successful because
they would create duplicate values in the index, primary key, or
relationship. Change the data in the field or fields that contain
duplicate data, remove the index, or redefine the index to permit
duplicate entries and try again.
will be generated by attempting which of the following?
A) A user tries to enter a record in the table Countries with the same primary key as
another record.
B) A user tries to add a record to a table that is related to the Countries table, and that
record contains a foreign key value that does NOT correspond to a primary key value
in the Countries table.
C) A user tries to request a joined table using the SQL language.
D) A user tries to enter a record in the table Countries that doesn't contain data in the
primary key.
158)
159) The following form of SQL command is classified as which of the four basic types of SQL requests?
SELECT field1, field2, ..., fieldN FROM Table1 WHERE criteria
159)
A) Request III: join the tables together (connected by a foreign key) and present the records
B) Request IV: make available just some of the fields of a table
C) Request II: show just the records that meet certain criteria
D) Request I: show the records of a table in a specified order
160) The following form of SQL command is classified as which of the four basic types of SQL requests?
SELECT * FROM Table1 WHERE criteria
160)
A) Request III: join the tables together (connected by a foreign key) and present the records
B) Request IV: make available just some of the fields of either the basic table or joined table
C) Request I: show the records of a table in a specified order
D) Request II: show just the records that meet certain criteria
161) Which SQL statement below would be used to display all of the records from the Cities table that
contain the letter e as the second character in the name listed in their city field?
A) SELECT * FROM Cities WHERE city Like 'e%'
B) SELECT * FROM Cities WHERE city Like '_e%'
C) SELECT * FROM Cities WHERE city Like 'E%'
D) SELECT
*
FROM
Cities
WHERE
city
Like
161)
'eb_%'
162) A program uses the lines
Dim dataAdapter As New OleDb.OleDbDataAdapter(sqlStr, connStr)
Dim commandBuilder As New OleDb.OleDbCommandBuilder(dataAdapter)
162)
changes = dataAdapter.Update(dt)
to update a database with changes made to a data table through a DataGridView control. In this
code, which one of the following is not the name of a variable?
A) connStr
B) dataAdapter
C) Update
D) changes
TRUE/FALSE. Write 'T' if the statement is true and 'F' if the statement is false.
163) The Rule of Referential Integrity insists that each value in the foreign key must also appear in the
primary key of the other table.
163)
164) A foreign key allows Visual Basic to join together two tables from a relational database in a
meaningful way.
164)
19
165) SQL may be used to create virtual tables in Visual Basic.
165)
166) SQL can be used in Visual Basic to sort records.
166)
167) A virtual table (or view) of a database table may be displayed in a DataGridView control by setting
the first argument of the OleDbDataAdapter equal to the appropriate SQL string.
167)
168) In the following SQL command, the phrase WHERE
ordered by the specified field or fields.
168)
SELECT
fields
FROM
clause
WHERE
criteria is used to present the records as
criteria
169) If a DataGridView control is filled from a table whose DataAdapter uses an SQL statement of the
form
SELECT * FROM clause ORDER BY field ASC
the result will be the display (in ascending order) of all records that are contained in the table or
tables designated by clause.
169)
170) If a DataGridView control is filled from a table whose DataAdapter uses the SQL statement (with 170)
the database MEGACITIES)
SELECT * FROM Cities WHERE city Like 'S%'
the result will be the display of all of the records from the Cities table that contain the letter S in the
name listed in their city field.
171) An SQL clause of the form
tblA INNER JOIN tblB
causes two tables to be joined.
171)
ON
foreign
key
of
tblA=primary
key
of
tblB
172) The statement
172)
dgvDisplay.DataSource = dt
(where dgvDisplay is the name of a DataGridView control and dt is a data table) will display the
contents of a data table in a data grid.
173) The Washington State Department of Motor Vehicles maintains a database on all licensed drivers 173)
and the cars that they own within the state. In the first table (Names) they have a listing of all of the
names of all licensed drivers; they have created a unique license number to identify each individual
within this database. In a related second table (Vehicles), the cars owned by Washington State
drivers are tracked. Since drivers often own more than one car, an individual's name (and
their corresponding driver's license number) is likely to appear more than once in this
second table. Therefore, we say that there is a one-to-many relationship from the names table
to the vehicles table in this database.
SHORT ANSWER. Write the word or phrase that best completes each statement or answers the question.
The following exercises refer to the Countries table discussed in the text. The table has three fields country, pop2005,
and monetaryUnit with country as the key field. In these exercises, give an SQL statement that can be used to
accomplish the stated task.
174) Show the records from Countries in descending order based on the 2005 population.
174)
175) Show the records from Countries whose monetary unit has five characters.
175)
20
MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question.
176) Which line of code will declare and create an instance of a new object variable called instructor
using a class called Faculty?
A) Dim instructor As New Faculty()
B) Dim Faculty As instructor
C) Dim Faculty As New instructor()
D) Dim
instructor
As
176)
Faculty
177) What is the purpose of the Get property procedure?
A) Access private methods.
B) Retrieve the value of a property.
C) Verify the data.
D) Assign values.
177)
178) Which procedure will set default values for member variables when an object is instantiated?
A) Get property procedure
B) Set property procedure
C) New
D) Form1_Load
178)
179) Which one of the following statements does NOT apply to object-oriented programming?
A) Object-oriented programming helps to prevent the complete rewriting of a program
every time a minor change needs to be made.
B) Object-oriented programming makes use of the principle of "data hiding."
C) Object-oriented programming depends on the programmer having access to and
understanding all of the code that contains the data and procedures that are
encapsulated within an object.
D) Object-oriented programming makes use of the encapsulation within an object of data
and procedures that act on the data.
179)
180) Which of the following is an example of a control object?
A) array
B) list box
C) string variable
180)
D) primary key
181) Which of the following statements applies to code objects?
A) They are created from the Toolbox.
B) They include objects of the type TextBox and ListBox.
C) They require the writing of a class block of code.
D) They are predefined and have physical manifestations.
182) Which of the following is an accurate definition of the term object-oriented program?
181)
182)
A) An object-oriented program is a specific instance of a user-defined type.
B) An object-oriented program is a template from which objects are created.
C) An object-oriented program is populated with objects that hold data, have
properties, respond to methods, and raise events.
D) An object-oriented program is an encapsulation of data and procedures that has
properties and responds to methods.
183) Which statement form below assigns a value to a property?
A) objectName.methodName(arg1, ...)
B) objectName.propertyName = value
C) varName = objectName.propertyName
D) RaiseEvent eventName
21
183)
TRUE/FALSE. Write 'T' if the statement is true and 'F' if the statement is false.
184) Member variables in a class are normally specified as Private.
184)
185) Set property procedures are used to assign values to member variables.
185)
186) Two instances of the same class may exist in a single program.
186)
187) An object can be created in the Declaration section of a form's Code editor with a pair of statements 187)
of the form.
Dim objectname As className
objectName
=
New
className(arg1,
arg2,
...)
188) A good rule of thumb for object-oriented programming is that classes are the verbs in your analysis 188)
of the problem.
189) Methods can be either Sub or Function procedures.
189)
190) Each list box is said to be an instance of the class ListBox.
190)
191) In the following statement, the word m_name demonstrates the proper name for a member or
instance variable. If these variables are declared without the prefix "m_", an exception will be
thrown.
191)
Private
m_name
As
String
192) Property blocks of code, that are used to access (indirectly) member or instance variables, must
always contain both Get and Set property procedures.
192)
193) Each class has a special method called a constructor that is sometimes invoked when an object is
instantiated.
193)
194) The constructor method requires at least one argument, and the code inside the procedure block
performs any tasks needed for initializing an object.
194)
MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question.
195) Which of the following is an example of an array declaration whose data type is a user-defined
object?
A) Dim students(50) As Student
B) Dim students(50) As String
C) Dim
students(50)
As
D) Dim
Integer
22
students(50)
As
TextBox
195)
196) In the following code block, which of the following represents the line of code that assigns the
value of the Name property?
Class Student
Private m_name As String
Public Property Name() As String
Get
Return m_name
End Get
Set(ByVal Value As String)
m_name = Value
End Set
End Property
End Class
A) Return m_name
B) m_name = Value
C) Private
m_name
As
D) End
String
196)
Class
197) Which of the following statements best applies to the term user-defined events?
A) User-defined events are predefined objects with physical manifestations.
B) User-defined events are used to communicate changes of properties, errors, and the
progress of lengthy operations.
C) User-defined events represent specific instances of a user-defined type.
D) User-defined events are populated with objects that hold data, have properties, respond
to methods, and raise events.
197)
198) Statements of which of the following kind should be placed in the Declarations section of a class
code block?
A) Dim WithEvents object1 As ClassName
B) RaiseEvent UserDefinedEvent(arg1, arg2, ...)
C) Private Sub object1_UserDefinedEvent(par1, par2, ...) _
Handles object1.UserDefinedEvent
D) Public Event UserDefinedEvent(ByVal par1 As dataType1, _
198)
ByVal
par2
As
dataType2,
...)
199) Statements of which of the following kind should be placed in the form's code to declare an
instance of a class that contains an event?
A) Dim WithEvents object1 As ClassName
B) Public Event UserDefinedEvent(ByVal par1 As dataType1, _
ByVal par2 As dataType2, ...)
C) RaiseEvent UserDefinedEvent(arg1, arg2, ...)
D) Private Sub object1_UserDefinedEvent(par1, par2, ...) _
Handles
199)
object1.UserDefinedEvent
TRUE/FALSE. Write 'T' if the statement is true and 'F' if the statement is false.
200) The statement for triggering a user-defined event is located in the form's code and the event is
dealt with in the class block of code.
200)
201) The statement for triggering a user-defined event is located in the class block of code and the event
is dealt with in the form's code.
201)
202) The keyword WithEvents is inserted into the standard declaration statement for instantiation of a
class to allow the instance to respond to an event.
202)
23
203) It can be said that class Student contains class College when a member variable of class Student 203) makes
use of an object of type class College.
MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question.
204) Which of the following terms does not describe a relationship between classes?
A) containment
B) subclass
C) inheritance
D) use
205) Which of the following best defines the term hierarchy?
A) the process by which the properties, methods, and events of one class are passed onto
another class
B) when one class manipulates or changes objects of another class
C) when a member variable of class A makes use of an object of type class B
D) the collection of a parent class along with its descendants
206) Which of the following best defines the term inheritance?
204)
205)
206)
A) when one class manipulates or changes objects of another class
B) when a member variable of class A makes use of an object of type class B
C) the collection of a parent class along with its descendants
D) the process by which the properties, methods, and events of one class are passed onto
another class
207) In the hierarchy chart shown above, GrandChild1 has access to each of the following items (as a
result of inheritance), except one. Which of the following is GrandChild1 NOT able to access?
A) Sub B
B) Property A
C) Event C
D) Property D
207)
208) Which of the following is a benefit of inheritance?
A) Inheritance allows variables to be collected in arrays.
B) Inheritance leads to the duplication of code in multiple classes.
C) Inheritance allows two or more classes to share some common features yet
differentiate themselves on others.
D) Inheritance allows Visual Basic applications to directly connect to databases.
208)
24
TRUE/FALSE. Write 'T' if the statement is true and 'F' if the statement is false.
209) Inheritance does not enhance code reusability.
209)
210) Inheritance is the process by which the parent or base class inherits the properties, methods, and
events of the child or derived class.
210)
211) The programmer needs to be able to identify useful hierarchies of classes and derived classes in
working with object-oriented programming.
211)
212) The feature that two classes can have methods with different names but that have the same
purpose (and essentially the same implementation), is known as polymorphism.
212)
213) In inheritance, the keyword Overridable is used to designate the parent's methods that may be
overridden by its children.
213)
214) The keyword MustInherit is used to declare an abstract base class.
214)
SHORT ANSWER. Write the word or phrase that best completes each statement or answers the question.
In the exercises below, fill in the blank with one of the following six words:
a. user-defined
b. polymorphism
c. derived
d. interface
e. uses
f. Get
215) The set of properties, methods, and events for a class is called a class ________.
215)
216) In addition to the predefined events for classes, such as New, other events can be defined
by the programmer to communicate changes of properties, errors, and the progress of
lengthy operations. Such events are called ________ events.
216)
217) One class ________ another class if it manipulates objects of that class.
217)
218) If class A inherits the properties, methods, and events of class B, then class A is referred to
as a ________ class of class B.
218)
25

Similar documents

×

Report this document