SCREAMIN EAGLE PRO RACING PARTS ’

Document technical information

Format pdf
Size 9.5 MB
First found Jun 9, 2017

Document content analysis

Language
English
Type
not defined
Concepts
no text concepts found

Persons

Paul the Apostle
Paul the Apostle

wikipedia, lookup

Organizations

Places

Transcript

HARLEY-DAVIDSON
®
®
SCREAMIN’ EAGLE PRO RACING PARTS
COMPETITION AND PERFORMANCE PARTS FOR THE EXPERIENCED RIDER
NEW PRODUCTS - JANUARY 2010
PUT IT TO THE TEST
Even with access to high-speed computers, theoretical modeling software, and hundreds
of years of combined engineering expertise, we still need to put our theories to the test.
We make hundreds of runs on the engine dyno to find the right mix of performance
parts, and then subject bikes to hours on the chassis dyno to dial in perfect calibrations
for street and track use. But sometimes, you just need to put rubber to the track.
For a complete recap of this 120 cubic inch racing machines’ specifications,
visit www.harley-davidson.com/racecatalog.
PICK A CLASS
RELIABILITY— RUN AFTER RUN
Built with an eye toward AHDRA’s ET or SEP racing class rules, our engineers
went to work changing a simple street-custom Dyna® Street Bob® into a
serious weekend racer. Trimmed of lighting, mirrors and other non-essential parts,
this track-only ride could be a garage-built project (with the right tools and
mechanical know-how). We started with a Pro Crankcase Set, and installed the
new 120ci Race Kit, complete with Bigger Bore Cylinders, MVA Cylinder
Heads, 10.5:1 high-compression pistons, SE-266E cams, a 58mm throttle
body and a free-flowing tuned exhaust. The results? 142 horsepower and
128 ft/lb of torque from 120 cubic inches.
To spend more time on the track, and less time spinning wrenches, we also
added everything you need to make this motor “bulletproof.” High lift rocker
arms live in forged rocker supports, and are motivated by perfect-fit pushrods
and roller tappets. The cams are held in place by a billet cam support plate,
and the crank rides in a premium Lefty roller bearing. The top and bottom end are
tied together with high tensile cylinder studs, and the power is put to the
ground through a billet clutch hub and race disc package.
ROLLER ROCKER
R
OCKER A
ARMS
FORGED ROCKER SUPPORTS
ROLLER TAPPETS
CAM SUPPORT PLATE
CYLINDER STUDS
RACE CLUTCH HUB
140
130
130
120
120
110
110
100
100
90
90
80
80
70
70
60
60
50
50
40
SE 120Cl WITH WEGNER X PIPE TQ
30
SE 120Cl WITH WEGNER X PIPE HP
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
40
30
7.0
ENGINE SPEED (rpm x 1000)
CAUTION ICONS
WARRANTY & CAUTION
WARRANTY Installation of Screamin’ Eagle® products, and similar off-road or
competition products from other manufacturers, except some street-legal
offerings installed by authorized Harley ® dealers, may void your H-D® limited
vehicle warranty. See your dealer for more information.
150
140
2.0
RACING INFORMATION GUIDE
OVERVIEW Harley-Davidson has the engineering expertise, a sophisticated dyno
lab and complete testing facilities to provide enthusiasts with a line of performance
products designed to produce good, solid, reliable horsepower and torque. Engine
related performance parts are intended for the experienced rider only.
150
CORRECTED REAR WHEEL HORSEPOWER (hp)
CORRECTED REAR WHEEL TORQUE (lb-ft)
SCREAMIN’ EAGLE 120CI RACE ENGINE
Installation of a California performance product onto a 49-state motorcycle,
or a 49-state performance product onto a California model motorcycle will void
Manufacturers warranty, as it will not result in a street-legal configuration.
CAUTION Harley-Davidson® motorcycles modified with some Screamin’ Eagle®
high-performance engine parts must not be used on public roads and, in some
cases, may be restricted to closed-course competition.
GO LIGHT These Screamin’ Eagle® products are 50-state street legal for
sale and use on all vehicles, including those that are pollution controlled.
STOPHAND Harley-Davidson® motorcycles modified with some performance
engine parts must not be used on public roads and, in some cases, may
be restricted to closed-course competition. Those performance parts identified with a
stophand symbol are US EPA legal, but are NOT legal for sale or use in California
on pollution controlled motor vehicles. California guidelines on tampering can also
lead to substantial fines and penalties.
CROSSED FLAGS Harley-Davidson® motorcycles modified with some
(Screamin’ Eagle®) performance engine parts must not be used on
public roads and, in some cases, may be restricted to closed-course competition.
In this Screamin’ Eagle® section, all engine-related performance parts identified
with the crossed flags symbol are intended for racing applications only and are not
legal for sale or use in California on pollution-controlled vehicles. Alterations of
emission related components constitutes tampering under the US EPA guidelines
and can lead to substantial fines and penalties.
CALIFORNIA These Screamin’ Eagle products are street legal for sale
and use on pollution controlled vehicles in the state of California.
A. SCREAMIN’ EAGLE® PRO
3
120 CI RACE KIT*
Put the performance of a 120R Race Motor into the heart
of your track bike. A sledge-hammer hitting performance
upgrade, this complete kit provides everything you need to
bring your Twin Cam “A” engine to 120 cubic inch displacement with the potential of 135+ HP. Kit includes 4-5/8"
stroke Premium Flywheel Assembly (P/N 24013-10), 58mm
throttle body, SE-266E cams, forged 10.5 to 1 compression ratio nickel-plated pistons with wear-reducing Tefloncoated skirts, and CNC-ported MVA heads with automatic
compression releases. Kit also includes Perfect Fit pushrods, Screamin’ Eagle Super Tuner, gaskets and lower piston
cooling jets. Stroker flywheels are manufactured from highstrength steel with an increased press fit for the crankpin to
enhance high-RPM reliability. Requires separate purchase
of appropriate high-flow injectors and a high performance
clutch upgrade. Just add your choice of race exhaust, highflow air cleaner, and tuning. Installation requires crankcase
machining by a qualified machinist. Dealer installation is
recommended. For race application only.
B. SCREAMIN’ EAGLE® PRO
3
CRANKCASE SET
These Screamin’ Eagle Twin Cam crankcases are precisely
machined with the larger cylinder bores required to accept
4.060" cylinders. The Crankcase is pre-assembled with
Screamin’ Eagle Piston Oil Jets designed to accommodate
4-5/8" Premium Stroker Crank Assembly P/N 24013-10, and
features factory-installed high-capacity Lefty main bearing,
right side bearing, and Timken high performance cam bearings. For race application only.
24601-10
$579.95
Fits ’06-later Dyna® and ’07-later Touring models.
C. SCREAMIN’ EAGLE PRO TWIN CAM FORGED
3
PISTON KIT FOR 4-5/8" STROKE
Forged from high-strength aluminum, these 10.5 to 1 ratio
pistons feature nickel-plated surfaces for enhanced durability, and a special Teflon® coating for improved wear-resistance required for racing applications. These pistons include
the newly developed Titanium SST rings to withstand the
stresses seen in racing. Complete kit includes pistons, rings,
wrist pins, and clips. All EFI models require ECM calibration*
(priced separately). For race application only.
NOTE: Installation of automatic or manual compression releases on large displacement engines is highly
recommended.
3
30086-10
Black Highlighted.
$4,699.95
Fits ’08-later Touring models. Installation requires engine
case modifications or separate purchase of Screamin’ Eagle
Pro Crankcase P/N 24601-10. Cannot be installed on
110ci CVO™ models or any Twin Cam model previously
upgraded to a 110ci motor unless installed with Crankcase
P/N 24601-10. Requires separate purchase of modelspecific Compression Release Wiring Harness Kit.
30087-10
Black Highlighted.
$4,699.95
Fits ’06-later Dyna® and ’07 Touring models. Installation
requires engine case modifications or separate purchase of
Screamin’ Eagle Pro Crankcase P/N 24601-10. Cannot be
installed on 110ci CVO models or any Twin Cam model
previously upgraded to a 110ci motor unless installed with
Crankcase P/N 24601-10. Requires separate purchase of
model-specific Compression Release Wiring Harness Kit.
B. SCREAMIN’ EAGLE PRO CRANKCASE SET
NOTE: High Compression Piston applications require installation of appropriate compression release in cylinder heads.
Always check piston-to-valve clearance with modified dome
pistons and non-stock cam shafts.
22574-10
4.060" Standard Bore.
$319.95
Fits ’06-later Dyna and ’07-later Touring models equipped
with 4.060 cylinders, 4-5/8" Flywheel and Rod assembly,
110+ Cylinder Heads, (or MVA Cylinder Heads, or ACR
Performance Cylinder Heads).
*Recalibration is required for proper installation. See dealer
for details. Labor cost not included.
D. SCREAMIN’ EAGLE PISTON OIL JET ASSEMBLY
2
These unique oil jets are designed to provide additional
piston skirt clearance when used with flywheels featuring
a stroke longer than the 4-3/8" Original Equipment configuration. These oil jets will provide appropriate clearance for
flywheels with stroke up to 4-5/8" when used with Screamin’
Eagle pistons. Sold in pairs.
22315-06A
$17.95
Fits ’99-later Dyna, Touring and ’00-later Softail® models.
150
150
140
140
130
130
120
120
110
1 10
100
100
90
90
80
80
70
70
60
60
50
50
40
40
SE 120CI with Wegner X Pipe TQ
SE 120CI with Wegner X Pipe HP
30
Corrected Rear Wheel Horsepower (hp)
Corrected Rear Wheel Torque (lb-ft)
Screamin’ Eagle 120CI Race Engine
E. SCREAMIN’ EAGLE HIGH PERFORMANCE
2
INNER CAM BEARINGS
High performance Inner Cam Bearings are a smart upgrade
when installing high lift cams in a race bike. These bearings provide increased load capacity and extend the engine
life in extreme racing conditions. Kit includes two bearings
required to complete one Twin Cam engine.
3
3
C. SCREAMIN’ EAGLE PRO TWIN CAM
FORGED PISTON KIT FOR 4-5/8" STROKE
A. SCREAMIN’ EAGLE PRO 120 CI RACE KIT
2
D. SCREAMIN’ EAGLE PISTON OIL JET ASSEMBLY
30
20
20
2
2.5
3
3.5 4 4.5 5
5.5
6 6.5
7
Engine Speed (rpm x 1000)
24017-10
$14.95
Fits ’99-’05 Dyna, ’00-’06 Softail, and ’99-’06
Touring models.
24018-10
$14.95
Fits ’06-later Dyna and ’07-later Softail and Touring models.
F. SCREAMIN’ EAGLE PRO TWIN CAM
3
PERFORMANCE CAM KIT – SE-254E**
This cam provides great low end torque along with good
midrange. A good “all-around” cam. Kit includes front
and rear cams. Splined rear cam is included for exceptional load handling capability. Gaskets and bearings not
included. Dealer installation is recommended, and special
tools are required for proper installation. Cam Installation Kit
P/N 17045-99C (sold separately) includes all required
gaskets, bearings and seals for proper installation. All EFI
models require ECM calibration (priced separately). For race
application only.
25503-10
$299.95
Fits ’06-later Dyna and ’07-later Softail and Touring models.
Lift @ Valve – Intake/Exhaust
535"/.536"
Duration @.053 – Intake/Exhaust 224˚/234˚
Timing @.053 Lift – Open/Close
Intake: 1˚ BTDC/43˚ ABDC
Timing @.053 Lift – Open/Close
Exhaust: 50˚ BBDC/4˚ ATDC
TDC Lift @ Valve – Intake/Exhaust 0.094"/.102"
*Recalibration is required for proper installation, and will
allow engine to rev to 6200 RPM. See Dealer for details.
Labor cost not included.
2
SCREAMIN’ EAGLE® PERFORMANCE
NEW PRODUCT
3
A. KIT P/N 30086-10 INCLUDES 58MM
THROTTLE BODY FOR ELECTRONIC
OPERATED THROTTLE
3
A. KIT P/N 30087-10 INCLUDES 58MM
THROTTLE BODY FOR CABLE
OPERATED THROTTLE
2
E. SCREAMIN’ EAGLE HIGH PERFORMANCE
INNER CAM BEARINGS
3
F. SCREAMIN’ EAGLE PRO TWIN CAM
PERFORMANCE CAM KIT – SE-254E
**CAUTION: Requires use of Screamin’ Eagle Valve Spring
Kit and appropriate Screamin’ Eagle Pushrods for installation
and to ensure proper clearance. Failure to comply may result
in engine damage.
SCREAMIN’ EAGLE® PERFORMANCE
NEW PRODUCT
3
A. SCREAMIN’ EAGLE® PRO 110
3
PERFORMANCE UPGRADE KIT*
This kit was engineered and tested to upgrade the CVO™
110 powertrain for use on the race track. Designed to
maximize performance with the stock cylinder heads, this
“in-a-box” kit includes high compression 10.5:1 pistons,
SE-259E cams, Perfect Fit pushrods, high performance
clutch spring, and gaskets. The kit also includes the “must
have” Screamin’ Eagle Pro EFI Super Tuner module to
provide the right on-track tuning for maximum performance. Installation provides significant improvements in
performance over the street-legal 110ci CVO vehicle configuration. When equipped with high-flow air intake and highflow exhaust, the combination has the potential to produce
114 HP and 110 ft lbs. of torque with the stock cylinder heads.
For race application only.
C. SCREAMIN’ EAGLE® PRO SUPER TUNER
3
Now featuring improved electronics to enhance reliability
and improve communication between the vehicle and the
computer. A “choke” feature has been added to the circuit
board, and the color of the Vehicle Communication Interface
(VCI) box has been changed to orange to provide visible
differentiation from the previous VCI.
Get the biggest advantage at the race track with the
Screamin’ Eagle Pro EFI Super Tuner. The hardware and
software in the Super Tuner makes EFI tuning easier with
dozens of innovative tuning enhancements. Super Tuner is
available in 8 languages (English, Spanish, German, French,
Japanese, Italian, Portuguese, and Dutch), and is compatible
with Windows® XP and Vista. The Super Tuner includes an
ergonomically improved Vehicle Communication Interface
(VCI) box. The new VCI allows USB connectivity to your PC
and contains on board memory for a full 15 minutes of data
recording, tracking up to 26 data variables. Data recording
is conveniently activated with a push of a button, allowing
the VCI to be taken to the track to gather data during true
race conditions. Cable Kit (P/N 32184-08) is sold separately
and provides all necessary connections between Motorcycle,
VCI, and PC / Laptop. The Super Tuner Software is easy to
use with a large icon layout, compatible with touch screen
laptops, the ability to work in 4 windows (tables) at one
time, and enhanced help tools to keep you on track. Data
and Tuning functions are combined into a single application,
ensuring you are only 2 clicks away from any major tuning
function. With a click of a button, the software automatically
connects to the internet and updates to the most current
version as well as retrieves the newest calibrations developed by professional Screamin’ Eagle calibrators. Software
contains built-in model recognition that filters calibrations,
listing those that are applicable to your model. State-of-theart graphing capabilities illustrate tables clearly, highlighting
areas for improvement, and are fully scalable and customizable. Additional features include editable calibration text,
custom note fields, drag and drop, cut and paste, and printing capability. To get you on the track quickly, Screamin’
Eagle offers a comprehensive computer based training DVD,
(P/N 32101-08). For race application only.
NOTE: Installation of automatic or manual compression releases on large displacement engines is highly
recommended.
27548-10
$1,259.95
Fits ’07-later CVO models with 110ci Twin Cam engines.
B. SCREAMIN’ EAGLE PRO 103
3
PERFORMANCE UPGRADE KIT*
Build a track-ready performance bike from your factory
Twin Cam 103CI model. Designed for use with stock cylinder heads, this “in-a-box” solution includes: high compression 10.5:1 pistons, SE-259E cams, Perfect Fit push rods,
high performance diaphragm clutch spring, high-lift valve
springs and gaskets. The kit also includes the “must have”
Screamin’ Eagle Pro EFI Super Tuner module to provide
the right on-track tuning for maximum performance. When
installed with your choice of high-flow air cleaner and freeflowing exhaust, this engine has the potential to produce 98
HP and 108 ft. lbs. of torque with the stock cylinder heads.
For race application only.
NOTE: Installation of automatic or manual compression releases on large displacement engines is highly
recommended.
27544-10
$1,159.95
Fits ’10 FLHTK and Trike models with Original Equipment
103ci Twin Cam engine.
3
A. SCREAMIN’ EAGLE PRO 110 PERFORMANCE UPGRADE KIT
Requires separate purchase of Super Tuner Software and
Cable Kit. (Available March 2010)
C. SCREAMIN’ EAGLE PRO SUPER TUNER
32109-08B
$459.95
Fits ’01-later EFI VRSC™, XL, XR, Dyna®, Softail® and
’02-later EFI Touring and Trike models. Also fits VRXSE
Destroyer race bikes.
Shown with:
SCREAMIN’ EAGLE PRO SUPER TUNER
3
SOFTWARE WITH “SMART-TUNE”
This updated software is required for all new 2010 model year
updates for the Super Tuner EFI tuning capabilities. Software
includes new 2010 race use only calibrations along with all
previous race use calibration software from ’02-’09. The new
software also includes a new time-saving self-tuning feature
called “Smart-Tune”. Now, you can choose a base calibration,
run the bike and record the data to the VCI box, download
the data, and the software will automatically make recommendations and adjust the settings for optimum performance. Smart Tune works on models with factory-installed
O2 sensors only. For race application only.
32111-10
Software CD.
$29.95
Fits ’01-later EFI VRSC, XL, XR, Dyna, Softail and
’02-later EFI Touring and Trike models. Also fits VRXSE
Destroyer® race bikes.
SCREAMIN’ EAGLE PRO SUPER TUNER CABLE KIT
32184-08
$39.95
SCREAMIN’ EAGLE PRO SUPER TUNER TRAINING DVD
32101-10
$29.95
*Recalibration is required for proper installation, and will
allow engine to rev to 6200 RPM. See Dealer for details.
Labor cost not included.
4
SCREAMIN’ EAGLE® PERFORMANCE
NEW PRODUCT
3
B. SCREAMIN’ EAGLE PRO 103 PERFORMANCE UPGRADE KIT
3
C. SCREAMIN’ EAGLE PRO SUPER TUNER
SCREAMIN’ EAGLE® PERFORMANCE
NEW PRODUCT
5
6
D. SCREAMIN’ EAGLE® THUNDER STREET
2
PERFORMANCE SLIP-ON MUFFLERS
Hear the thunder long before the storm hits. Screamin’ Eagle
3-1/2" Performance Mufflers provide increases in torque and
horsepower you can feel. Designed to work with the headermounted catalysts, these pipes feature an open baffle design
that produces a rich, deep base note that meets 50-state
sound level requirements. Internal insulation protects the
rich chrome finish from heat and discoloration. Fitted with
your choice of stylish End Caps (sold separately), these easyto-install slip-on mufflers make the styling and sound statement you are looking for.
A. SCREAMIN’ EAGLE® SPORTSTER®
2
883CC TO 1200CC STAGE I CONVERSION KIT* –
SOLID BLACK
Make your 883 roar. Now available in wrinkle black finish without highlighted fins to match the Iron 883™, this complete
conversion kit will alter the personality of your 883-equipped
Sportster model. Designed to bring your XL 883 model up
to XL 1200 specifications, this kit includes Sportster Stage
I Air Cleaner kit, XL 1200 cylinder heads, and XL 1200 cylinders and pistons. No case machining is required for installation. Street legal when used with stock mufflers. All models
require ECM calibration* (priced separately).
30003-10
Black Non-Highlighted.
Fits ’08-later XL883 models.
$1,199.95
65115-10
$379.95
Fits 50-state ’10 Touring and Trike models (except FLHX,
FLTRX, FLHXSE, and FLHTCUSE) and models equipped
with 103CI Street Legal Stage I Engine Kits. Also fits ’09
California Touring models. Requires separate purchase of
End Cap kit and Muffler Clamps P/N 65296-95A (Qty 2).
*Recalibration is required for proper installation, and will
allow engine to rev to 7000 RPM. See Dealer for details.
130
130
120
120
110
110
Stock 883 TQ
Stock 883 HP
1200 SE Exhaust/Stage I TQ
1200 SE Exhaust/Stage I HP
100
90
100
90
80
80
70
70
60
60
50
50
40
40
30
30
20
20
2
2.5
3
3.5
4
4.5
5
5.5
6
6.5
Corrected Rear Wheel Horsepower (hp)
Corrected Rear Wheel Torque (lb-ft)
Sportster 883cc Stock vs. 1200cc Stage I Kit
(Shown with SE Performance Mufflers)
26
D. SCREAMIN’ EAGLE THUNDER STREET PERFORMANCE SLIP-ON MUFFLERS
$149.95
C. SCREAMIN’ EAGLE JET BLACK HEADER PIPES
Hide the blue. These Original Equipment-style Header Pipes
have been finished with a unique jet black heat resistant
coating, and are a great accent to both chrome and black
Buckshot exhaust shields. When exposed through the holes
in the Buckshot shields, the black header pipe provides a
sinister accent and hides the heat-tempered finish of the
typical exhaust pipe. Easy to install using factory mounting
hardware, the kit includes front and rear header pipe.
SCREAMIN’ EAGLE® PERFORMANCE
NEW PRODUCT
$99.95
$99.95
28728-10
$25.95
Fits Screamin’ Eagle Air Cleaner Kits P/N 29773-02C,
29406-08, and 29260-08.
B. SCREAMIN’ EAGLE BUCKSHOT EXHAUST
SHIELD KIT – CHROME
These custom shields feature a perforated “Buckshot”
design that exposes the head pipe for a raw, rebellious look.
The mirror-chrome finish is a perfect match for Original
Equipment or Screamin’ Eagle chrome mufflers for a consistent look from front to back, or combine with Jet Black Header
Pipes P/N 80887-10 for a more sinister accent. Manufactured
to Original Equipment standards for exacting fit, the easy-toinstall kit includes front and rear head pipe shields.
6
Piston.
Slash Cut.
F. SCREAMIN’ EAGLE AIR CLEANER RAIN SOCK
Add the open-element look to your Screamin’ Eagle Stagestyle Air Cleaner. This easy-to-install kit allows you to replace
the traditional Original Equipment Air Cleaner cover with
one of the custom inserts from one of the H-D Decorative
Collections. Kit includes a breathable mesh cover with classic Bar & Shield logo that stretches over the filter to maximize air flow while protecting the exposed element from
the rain. Fits traditional cone-shaped air cleaner elements
featured in many Screamin’ Eagle Twin Cam Stage Kits.
7
80887-10
Fits ’07-later XL models.
Fits Screamin’ Eagle 3-1/2" diameter Touring Mufflers Kit
P/N 65115-10.
80629-10
80630-10
Engine Speed (rpm x 1000)
64601-10
Fits ’04-later XL models.
E. SCREAMIN’ EAGLE 3-1/2" END CAPS
These billet End Caps allow you to personalize your Screamin’
Eagle Thunder Street Performance Touring Mufflers.
Available in Slash Cut or Piston styles, these easy-to-install
caps are finished in the same brilliant chrome as the mufflers
and exhaust shields for a consistent look front to back. Sold
in pairs.
2
A. SCREAMIN’ EAGLE SPORTSTER 883CC TO 1200CC STAGE I CONVERSION KIT – SOLID BLACK
E. SCREAMIN’ EAGLE 3-1/2" END
CAPS – PISTON
E. SCREAMIN’ EAGLE 3-1/2" END
CAPS – SLASH CUT
$99.95
B. SCREAMIN’ EAGLE BUCKSHOT EXHAUST
SHIELD KIT – CHROME
C. SCREAMIN’ EAGLE JET BLACK
HEADER PIPES
F. SCREAMIN’ EAGLE AIR CLEANER RAIN SOCK
SCREAMIN’ EAGLE® PERFORMANCE
NEW PRODUCT
7
A. SCREAMIN’ EAGLE® HEAVY BREATHER FILTER
COVER – TWISTED SLOT
Dress up the Heavy Breather Air Cleaner with this radical
cover. Manufactured from forged aluminum and precision
CNC-machined and polished, these easy-to-install two-piece
covers add a rich custom look. Cover is available in Mirror
Chrome or Cutback Black finish to match your customizing
direction. Kit includes water-repellant rain sock. (Available
March 2010)
D. SCREAMIN’ EAGLE® MAGNETIC LIFTER HOLDERS
Simplify engine cam swaps. During rebuild, the lifters drop
down onto the cams lobes, making it difficult to remove or
install the cams. This clever tool uses strong magnets to hold
the lifters up and out of the way while removing or installing the cams. Manufactured from 6061-T6 billet aluminum,
these handy tools are orange anodized to make them easy to
find in a crowded tool chest. Sold in pairs, a set allows you to
service both front and rear lifters at the same time.
93979-10
For use on ’99-later Twin Cam models.
Fits Heavy Breather Air Cleaner filter elements (except
Compact Version P/N 28716-10). Does not fit with decorative filter end caps.
28742-10
28741-10
Chrome.
Cutback Black. (not shown)
E. SCREAMIN’ EAGLE TORQUE ANGLE GAUGE
This tool allow you to use the same precise assembly techniques used at the factory. Many fasteners on the engine
should be tightened to an initial torque value and then turned
an additional prescribed angle to ensure that the fastener
has the appropriate amount of “stretch” and attains the
required clamp load. Tightening fasteners by torque specification alone can result in insufficient or over-tightening
because of nicked or dirty threads. The easy-to-read dial face
provides precise measurement, and the 3/8" drive makes
this tool compact and easy to use in most applications.
$169.95
$169.95
B. SCREAMIN’ EAGLE PROGRAMMABLE
2
SHIFT LIGHT
Racers know there’s no time to look at the tach; they trust a
shift light that can be seen with peripheral vision so they can
maintain focus on the track. Now you can bring that same
attention-grabbing experience to your ride. The compact
Screamin’ Eagle Shift Light features quick-reacting amber
LEDs to alert rider when to shift, and an easy-to-see red
digital RPM readout. LED intensity can be adjusted for day
or night-time use. The shift points and red line settings are
programmable, and include four configurable speed bands
and push-button quick capture. Kit includes shift light,
mounting clamp with insert to fit all 1" and 1-1/4" handlebars,
Screamin’ Eagle rain cover, and all required hardware.
$19.95
94147-10
$39.95
For use on applications where torque angle measurements
are specified during assembly, i.e. head bolts.
A. SCREAMIN’ EAGLE HEAVY BREATHER TWISTED COVER – CHROME
D. SCREAMIN’ EAGLE MAGNETIC
LIFTER HOLDERS
D. SCREAMIN’ EAGLE MAGNETIC
LIFTER HOLDERS
69779-09
$249.95
Fits ’04-later XL, XR, Dyna®, Softail® and Touring models.
C. ENGINE ASSEMBLY/DISPLAY STAND
This dual purpose engine stand provides support to the Twin
Cam Alpha (Dyna/Touring) crankcase during engine teardown and assembly, and also provides a means to display
the completed engine. Heavy duty steel stand can be used
free-standing on its non-marking rubber feet, or bolted to
the bench for added stability. Stand features a laser-cut Bar
& Shield logo.
F. SCREAMIN’ EAGLE O2 SENSOR SOCKET
This cut-away socket is designed to clear the wire lead and
simplify the removal or installation of the oxygen sensor on
closed loop fuel injected models. Manufactured to withstand
the installation torque requirements, the socket features a
3/8" drive receiver.
93980-10
For use on ’10-later Touring and Trike models
with O2 sensors.
$19.95
G. CODE MASTER SERVICE CODE READER
Be prepared when you visit your dealer for service. Diagnostic
code scanner easily retrieves trouble codes from your vehicle’s computer to diagnose problems. The pocket-sized diagnostic code reader simply plugs into your bike’s vehicle port,
and automatically connects to the onboard computer. It
reads the Diagnostic Trouble Codes (DTC) and displays the
DTC description on a bright LCD screen. The Code Master
allows you to clear codes with the touch of a button, and also
lets you to double check the current calibration ID for your
motorcycle. The Code Reader is powered by your bike when
connected. Kit includes palm-sized reader, J1850 connection
cord, and instructions.
94845-10
$59.95
For use with Twin Cam Alpha (Dyna/Touring) motors.
32312-10
$149.95
For use on ’02-’10 VRSC™, ’07-’10 XL and XR, ’02-’10 Dyna®,
’01-’10 Softail®, and ’02-’10 Touring models equipped with
J1850 protocol On-Board Diagnostics information plug.
2
8
SCREAMIN’ EAGLE® PERFORMANCE
NEW PRODUCT
B. SCREAMIN’ EAGLE PROGRAMMABLE SHIFT LIGHT
B. SCREAMIN’ EAGLE PROGRAMMABLE
SHIFT LIGHT
E. SCREAMIN’ EAGLE TORQUE ANGLE GAUGE
E. SCREAMIN’ EAGLE TORQUE ANGLE GAUGE
C. ENGINE ASSEMBLY/DISPLAY STAND
(SHOWN WITH OPTIONAL MAGNETIC
HARDWARE TRAY)
C. ENGINE ASSEMBLY/DISPLAY STAND
(SHOWN WITH OPTIONAL MAGNETIC
HARDWARE TRAY)
F. SCREAMIN’ EAGLE O2 SENSOR SOCKET
G. CODE MASTER SERVICE CODE READER
SCREAMIN’ EAGLE® PERFORMANCE
NEW PRODUCT
9
WRENCH ON SATURDAY…
WIN ON SUNDAY
Your competition never sleeps, and neither do we.
For the latest in Screamin' Eagle Pro Performance
parts, stop by your dealer and pick up the 2010
Screamin' Eagle Pro Racing Parts Catalog or visit
www.harley-davidson.com
Harley-Davidson Parts and Accessories Division, a facility of Harley-Davidson
Motor Company, recently achieved certification to its ISO 9001:2008
International Quality Standard registration.
The sale or use of these parts or accessories does not grant the purchaser a
license or other right under any Harley-Davidson patent.
IMPORTANT PLEASE READ: We have tried to make this catalog comprehensive and factual. All product descriptions (including depictions, specifications,
dimensions, measurements, ratings and competitive comparisons) are based
on available information at the time of publication. Although such descriptions
are believed correct, errors and changes can occur and complete accuracy cannot be guaranteed. Harley-Davidson may make changes at any time to prices
and specifications, and may change or discontinue any of the items depicted in
this catalog, without notice and without incurring any obligation.
ATTENTION: Vehicles in the configurations shown and the accessories
described in this catalog may not be available for sale or use in some locations.
Please check with your dealer for complete product details and the latest
information.
Bar & Shield logo, Destroyer, Deuce, Dyna, Electra Glide, Evolution, Fat Bob,
Fat Boy, Harley, Harley-Davidson, HD, H-D, Heritage Softail, Heritage Springer,
Hugger, Revolution, Road Glide, Road King, Screamin’ Eagle, Softail, Sportster,
Springer, Street Bob, Street Glide, Street Rod, Super Glide, SYN3, Twin Cam 88,
Twin Cam 88B, Twin Cam 96, Twin Cam 96B, Twin Cam 103, Twin Cam 103B,
Twin Cam 110, Twin Cam 110B, Ultra Classic, V-Rod, VRSC, Wide Glide, and the
Harley-Davidson Genuine Motor Parts and Genuine Motor Accessories Logo
are among the trademarks of H-D Michigan, LLC.
AHDRA, AMA, Dunlop, Dynojet, FullThrottle, JIMS, NHRA, POWERade, Vance
& Hines, Windows, Windows Vista and all other marks are trademarks of their
respective owners.

Similar documents

×

Report this document