Master Products Catalog - Choate Machine Tool, Inc.

Document technical information

Format pdf
Size 2.8 MB
First found Jun 9, 2017

Document content analysis

Category Also themed
Language
English
Type
not defined
Concepts
no text concepts found

Persons

Clara Barton
Clara Barton

wikipedia, lookup

Organizations

Places

Transcript

QUALITY
Choate Machine & Tool, Inc. went into business in 1972. It was our
goal from day one to establish a business founded on quality and the
durability of the parts manufactured. We have succeeded in
establishing our company as the leader in firearm accessories around
the world in both of these categories. All parts are made in the USA.
WARRANTY
Choate Machine & Tool, Inc. has always had an UNCONDITIONAL
WARRANTY on everything it makes. The warranty is for life, your
life or the life of the weapon. If your accessory fails to function perfectly
you get a new part with “NO DUMB QUESTIONS ASKED”.
DURABILITY
Our products are over designed and over built to last forever. We
couldn’t give a life time warranty if they were not. Our stocks are used
by most of the law enforcement agencies around the world and in many
‘life or death’ situations. They absolutely can not fail.
SERVICE
No company can possibly give better service than Choate. We do this
because we care.
Fred Choate
PRESIDENT
CHOATE PISTOL GRIP AND SPORTER STOCKS
Mini-14/30 Conventional
Mini-14/30 Conventional
This stock resembles the wooden stock in appearance.
Stock comes with a full 1 inch rubber recoil pad and two
sling swivel loops. These stocks fit the 181 and up series
only.
Mini-14/30 Conventional Stock
07-01-40
Mini-14/30 Pistol Grip Stock
Mini-14/30 Pistol Grip
Constructed of fiberglass filled polymer. These stocks are
more comfortable than the traditional wooden stocks in
the fact that with the pistol grip, you can hold the rifle in
a more natural position. These stocks have a 1 inch rubber
recoil pad and two 1 inch sling swivel loops. These stocks
fit the 181 and up series only.
Ruger Mini-14/30 Pistol Grip Stock
07-01-12
Ruger 10/22 Pistol Grip Stock
Ruger 10/22 Pistol Grip
Make a great rifle even better with a fast handling,
lightweight, convenient pistol grip stock. This stock is made
from tough fiberglass filled polymer. It has a 1 inch rubber
recoil pad and two 1 inch sling swivels. It also comes with
a free-ventilated hand guard and our famous lifetime
warranty.
Ruger 10/22 Pistol Grip Stock
07-01-02
M-1 Carbine Pistol Grip Stock
M-1 Carbine Pistol Grip
The M-1 carbine is an American Classic. Now you can enjoy
this rifle even more with a Choate full length pistol grip
stock. This stock comes with a 1 inch rubber recoil pad and
two 1 inch sling swivel. A matching steel ventilated hand
guard is also available and sold separately. Only fits military
M-1 Carbine.
M-1 Pistol Grip Stock (M)
08-01-02
Ruger 10/22 & Mini-14 Dragunov Stock
Mini-14/30 Dragunov
Ruger 10/22 Dragunov
Now you can enjoy your Ruger 10/22 or Mini-14 even more
with the addition of our Dragunov Stock. This stock is a
perfect match for your rifle and features a 1 inch rubber
recoil pad, one 1/2 inch spacer, Russian style steel sling
mount pin and a free ventilated hand guard with 10/22
only. These stock will fit the standard and .920 diameter
barrel.
(Please specify when ordering.)
Ruger 10/22 Dragunov Stock
07-01-08
Ruger 10/22 Dragunov Stock (Bull Barrel)
07-01-10
Mini-14/30 Dragunov Stock
07-01-18
No hand guard for Bull Barrel stocks or Youth stocks.
Ventilated Hand Guards
Avoid accuracy loss and extend the life of your barrel with
one of our Ventilated Hand Guards designed to dissipate
heat generated during rapid fire.
10/22 Ventilated Hand Guard
07-02-02
M-1 Steel Ventilated Hand Guard
08-02-02
Mini-14/30 Ventilated Hand Guard
07-02-04
S.K.S. Ventilated Hand Guard
18-02-06
3
FOLDING STOCKS
Choate is proud of our line of folding stocks.
They are lightweight and very compact. Great
for hiking, backpacking, guiding, riding in a car
or storage in your home. When folded, they
cut 12 inches off the total length of your rifle.
They lock when folded but are quick to open.
The folding stocks are very ridged when extended
and insure a stable shooting platform for your
rifle. The housings and arms are cast out of a
high quality tool steel and then machined and
blued in our factory. The cast arms are then
molded with nylon polymer and fitted with a
recoil absorbing rubber butt pad. These stocks
are hand assembled and quality checked to be
straight when in the opened position and lock
up in both the open and closed position. The
springs, housing, arms, and stocks are 100%
made and assembled in the USA and carry the
Choate lifetime guarantee.
Mini-14
07-01-14
Mini-14
Stainless 07-01-16
10/22
07-01-04
10/22
Stainless 07-01-06
Marlin Camp 9mm/45ACP
14-01-01
Marlin Camp 9mm/45ACP Stainless 14-01-03
SKS
18-01-04
M-1 Military
08-01-04
(will not fit universal M-1 Carbine)
4
CHOATE S.K.S. STOCKS
S.K.S. Stocks
Ship your old wooden handguard and your new
plastic handguard with $8.00 for shipping and we
will install your new upper handguard free.
Our S.K.S. stocks are made from the highest quality fiber
reinforced polymer. The stocks feature our lifetime warranty
and have a standard 135/8 inch length of pull which is much
longer than the original wood stocks. Ventilated hand guard
included.
S.K.S. Conventional Stock
18-01-02
S.K.S. Dragunov Stock
Recoil compensator, scope mount
and scope not included.
Our S.K.S. Dragunov stock is made of the finest fiberglass
filled polymer available today. It features a full 1 inch rubber
recoil pad, our famous spacer system, and Russian style steel
sling mount pin. Cheek piece and matching ventilated
handguard included.
S.K.S. Dragunov Stock
18-03-02
MAK-90/AK-47 Stock
Our Dragunov Design MAK-90/AK-47 stock features a convenient
thumbhole design and our adjustable length of pull spacer
system. This system allows you to adjust the length of pull
from 13 inch to a 141/2 inch length by adding spacers. Other
features include tough fiberglass filled polymer, black matte
textured finish, 1 inch thick rubber recoil pad, Russian style
steel sling mount pin and we include a matching upper and
lower hand guard with our stocks. (You may order spacers
and a matching cheek piece for scope use separately if
needed.) Please specify milled or stamped receiver when
ordering.
MAK-90/AK-47 Dragunov Stock Milled Receiver 18-03-06
MAK-90/AK-47 Dragunov Stock Stamped Receiver 18-03-08
Hungarian AK 47
23-03-02
S.K.S. Recoil Compensator
Choate Machine & Tool now makes a recoil compensator for
the popular S.K.S. rifles. These compensators are acid-bath
blued and simply slide over the end of the barrel and attach
to your bayonet ring. (Can not be used with bayonet.)
S.K.S. Recoil Compensator
18-07-02
Choate S.K.S. Scope Mount
Our S.K.S. Scope Mounts are second to none in quality and
workmanship. They are invest cast out of 4140 steel and
blued to match the gun’s finish. These mounts are designed
to use Weaver type one inch rings and are raised to allow the
shooter to use the iron sights as well as a scope.
S.K.S. Scope Mount
18-08-02
*must be installed by a gunsmith.
5
CHOATE SHOTGUN STOCKS & MATCHING FOREND
If you are looking for a less expensive solution to making your
shotgun a tactical entry or home defense weapon, then we have
the forend for you. Our forend kit includes a forend with predrilled holes and a 11/2 inch piece of picatinny rail. To attach
our rail at 3-6-9 o’clock position, you simply use a Phillips head
screwdriver and screw in 4 screws (provided). It accepts all
tactical light mounts that fit on 1913 picatinny style rails. This
includes Surefire®, Streamlight®, Pelican®, Pentagon® and Glock
lights®.
Remington 1100 Forend w/Picatinny
01-02-23
Remington 870 Forend w/Picatinny
01-02-22
Mossberg 500/590 Forend w/Picatinny
02-02-22
Mossberg 500/590/835 Forend short w/Picatinny 02-02-26
Rail Only - Rem/Moss/Win
60-09-23
Rail Only - Rem 1100/11-87 Moss 5500
60-09-24
Choate Synthetic Forends
Choate Synthetic Forends go great with our pistol grips and
Conventional Stocks. Made of fiberglass filled plastic, they look
good and will last a lifetime. (No forend for Winchester 1400,
Mossberg 5500/9200). Mossberg 835 forends are shorter than
standard Mossberg 500 forends. No forends for Remington
7615/742/750/7400/7600
Remington 870 Forend
01-02-02
Remington 870 Light Wt. Forend 20 Gauge
01-02-14
Remington 1100/1187 Forend
01-02-12
Mossberg 500/600 Forend
02-02-02
Winchester 1200/1300 Forend
03-02-02
Ithaca 37 Forend
04-02-02
Mossberg 590/835 short Forend
02-02-06
Mark 5 Conventional Stock
CM & T’s Mark 5 Conventional Stock features our innovative new spacer
system. It comes with two spacers included which adjusts the
length of pull from 13 inch to 14 inch. You can lengthen your
stock by simply adding spacers and longer screws. Our stocks
are made of the finest materials available and carry our
lifetime
warranty.
No
forends
for
Remington
7615/742/750/7400/7600
Remington 870
01-01-44
Remington 1100/1187 Conventional Stock
01-01-52
Remington
Lightweight 870, 7615, 7400, 7600, 742, 750 01-01-48
Mossberg 500 Conventional Stock
02-01-30
Mossberg 5500/9200
02-01-32
Ithaca 37
04-01-12
Winchester 1200/1300/1400
03-01-08
6
Conventional Mark 5
CHOATE SHOTGUN STOCKS & MATCHING FOREND
Choate Pistol Grip Stock (Mark 5)
Pistol Grip Mark 5
This stock reduces felt recoil and muzzle climb to make
follow-up shots faster and more accurate. Single-handed firing
is also made much easier.The stock is made of tough fiberglass
filled plastic and comes with a 1 inch rubber recoil pad and a
quick detach swivel stud.These stocks have our innovative new
spacer system and come with two 1/2 inch spacers included which
adjusts the length of pull from 13 inch to 14 inch.
Mossberg 930, 935
02-01-40
Remington 870
01-01-42
Remington Lightweight 870, 7615, 7400, 7600, 742, 750
Pistol Grip Stock
01-01-50
Remington 1100/1187
01-01-34
Winchester 1200/1400
03-01-06
Mossberg 500/600/590/835
02-01-28
Mossberg 5500 & 9200 Pistol Grip Stock
02-01-34
Ithaca 37
04-01-08
Pistol Grip Youth Body Armor Stock
Same great attributes of our popular Mark 5 pistol grip stock
but with a shortened length of pull of 113/4 inches.
Remington 870
01-01-46
Remington
Lightweight 870, 7615, 7400, 7600, 742, 750 01-01-38
Mossberg 500/600/590/835
02-01-08
Mossberg 5500
02-01-24
Conventional Youth Body Armor Stock
Same great attributes as Mark 5 conventional stock but has an
113/4 inch length of pull.
Remington 870
01-01-36
Remington
Lightweight 870, 7615, 7400, 7600, 742, 750 01-01-40
Mossberg 500/600/590/835
02-01-10
Mossberg 5500
02-01-26
Mark 6
Our Mark 6 stock has all the features of the Mark 5 stocks
and will hold five rounds in the bottom. It will take 23/4 to
31/2 inch 12 ga. shells, you can adjust how hard the shells are
to remove by tightening the adjustment screws on the side
of the shell holder.
Remington 870
01-01-14
Mossberg 500/600/590/835
02-01-15
Old Style Skeletonized Stocks
Our original old style conventional stocks that have the same
feel as your original wood stock.
870 Conventional Stock
01-01-04
Winchester Conventional Stock
03-01-04
7
LESS LETHAL & O.D. GREEN
Green and Less Lethal Stocks
These stocks are made of the same fiber filled polypropylene as
all of our stocks. The dye has been changed in order to achieve
the Olive Drab Green and the Less Lethal Orange coloring. The
Orange of the less lethal firearm gives quick recognition for
police officers. The Mark 6 was actually designed for Less Lethal
shot. The shell holder in the butt stock allows the user to see
what type of shell he is choosing before removing the shell from
the shell carrier. This saves time and helps to insure proper use
of different shells. When fully loaded the Mark 6 stock carries 5
extra shells. The shell carriers can be individually adjusted to
ensure a tight hold on the shot shell and accommodates all 12
gauge shells from 23⁄4 inch to 31⁄2 inches in length.
MK5 Orange Remington
870 Pistol Grip Stock & Forend set
01-01-17
MK5 Orange Mossberg
500/590 Pistol Grip Stock & Forend set
02-01-36
MK5 Orange Mossberg Short
835/500/590 Pistol Grip Stk & Short Forend set 02-01-38
Li mi te d Qua ntity
MK5 Green Remington
870 Pistol Grip Stock & Forend set
MK5 Green Mossberg
500/590 Pistol Grip Stock & Forend set
MK5 Green Mossberg Short
835.500/590 Pistol Grip Stk & Short Forend set
SKS Dragunov Green
10/22 Pistol Grip Stock
10/22 Dragunov Green
Mini-14 Green
01-01-19
02-01-37
02-01-39
18-03-05
07-01-03
07-01-09
07-01-13
CHOATE BUTT PADS AND SPACERS
Thin Butt Pads
Our thin butt pads are designed to work on all of our stock that use our
space system. The hard 1/4 inch pad is for when you need the shortest length
stock you can get. Our 1/2 inch pad is for shooters that want short length
without giving up the rubber pad so the stock will not slide when the
weapon is shouldered.
1/4 inch Hard Plastic
18-06-04
1/2 inch Rubber Coated
18-06-05
Spacers for Mark 5, Mark 6, All Dragunov, Varmint And Sniper Stocks
Extra spacers for all our stocks that have the adjustable length of pull system.
You can make your stocks as long as you need to get the perfect length of pull
by adding any combination of these spacers. Each set comes with screws and a
spacer. *There is a difference between the spacers for the Ultimate Sniper stock and all the other
stocks that have the spacer system.
1/4 inch Spacer
1/4 inch Sniper Spacer
1/2 inch Spacer
1/2 inch Sniper Spacer
(2) 1/2 inch Sniper Spacer
3/4 inch Spacer
3/4 inch Sniper Spacer
8
18-05-03
18-05-12
18-05-05
18-05-10
18-05-14
18-05-07
18-05-15
SHOTGUN FOLDING STOCKS
Tactical M-4 Style Telescoping Folder
Choate now offers a pistol grip and telescoping folder for the
7615P Patrol Rifle, 7600, 870 and 870 Lightweight from
Remington. This stock can be shortened for use as an entry
weapon. Rapidly extend the stock to full length for long range
shooting. The folding abilities of the stock add yet another
dimension of convenience, allowing you to easily manipulate
the weapon while in a patrol car or civilian vehicle.
Remington 7615P, 7600, 7400, 742 & 750
870 Lightweight M4 folder
01-01-60
Remington 870P Standard M4 folder
01-01-61
Top Folding Shotgun Stocks
Our top folding stock makes an excellent compact package.
These stocks are custom fit and are of solid steel construction.
This stock is operated with a simple push of a thumb button
to lock it in either the open or closed position. This stock fits
riot guns with rifle sights and ventilated rib barrels. Not for
use with Ghost Ring style sights.
Remington 870 Top Folder
01-01-12
Mossberg 500/600/590/835 Top Folder
02-01-12
Winchester 1200/1300/1400 Top Folder
03-01-12
Side Folding Shotgun Stocks
Our side folding shotgun stocks must be used with a
minimum length forend, which is included with the folder kit.
The folders are made of 4140 steel and fiberglass filled plastic.
They come with a 1 inch recoil pad and sling loops. (No forend
with the Winchester-1400, or Fabarm FP6)
Remington 870 Side Folder
Black-01-01-22
Mossberg Side Folder 500/600/590/835 Black-02-01-22
Winchester Side Folder
Black-03-01-22
Ithaca 37 Side Folder
Black-04-01-22
*Fabarm FP6 Folder
Black-15-01-01
*No forends for Fabarm guns
Choate Pistol Grips & Pistol Grip Forends
There are several advantages to having a Pistol Grip Forend.
By holding the gun in a more natural position, it is easier to
control and aim. It also protects the shooter’s hand from
slipping off the forend during rapid fire. These pistol grip
forends are constructed of fiber reinforced polymer and will
give a lifetime of shooting performance. Mossberg 835 forends
are shorter than standard Mossberg 500 forends.
Pistol Grip H&R/NEF 410/20/16/12
19-03-02
Mossberg 500/600 Pistol Grip Forend
02-02-04
Mossberg 500/600/835 Short Pistol G. Forend 02-02-08
Mossberg 500/600 Pistol Grip
02-03-02
Remington 870 Pistol Grip Forend
01-02-04
Remington 870 Grip
01-03-02
Winchester 1200/1300 Pistol Grip Forend
03-02-12
Winchester 1200/1300 Pistol Grip
03-03-02
Ithaca Pistol Grip
04-03-02
9
CHOATE MAGAZINE EXTENSION
Increase your fire power from 2 to 5 shells with our shotgun
magazine extension kits. These extensions are great for law
enforcement officers and competition shooters in reducing the
time to reload. They are also a must for home protection.
These kits are constructed of solid blued steel and come Fabarm FP6
*
with spring, base clamp & follower.
* Fabarm FP6
Kit includes :
1 Magazine Extension - (7,8, 9 or 10 shot),
1 Base Clamp
1 High Visibility Shell Follower.
Approximate length of extensions are: 7 shot 6 inches
8 shot 8-1/8 inches
9 shot 10-1/4 inches
10 shot 14-3/4 inches
Will Fit:
Remington 870/1100/1187
Mossberg 5500/9200 (9200 must have special shell follower)
Winchester 1200, 1300, Ranger 120 & Defender
7 Shot Model fits 18 inch barrel or longer.
8 Shot Model fits 20 inch barrel or longer.
9 Shot Model fits 24 inch barrel or longer.
10 Shot Model fits 26 inch barrel or longer.
*(Fabarm FP6 and Mossberg 835 kits don’t include base
clamps.)
The new model Remington shotguns have dimples that hold
the spring retainer in. If you have these you will need a 3/16 inch
(5mm) drill and drill each dimple out from the outside of the
tube. You take a round file and remove all burrs from the inside
of the tube.
1. You will need eye protection! Part will be under spring
pressure. Remove the magazine cap from the end of the
magazine tube under barrel by unscrewing it.
2. If your shotgun has the metal spring retainer you will have
to gently pull it out. Caution the spring is under pressure, it will
jump out of the tube if you are not careful. If you have the new
type spring retainer remove the dimples.
3. Remove the spring and shell follower. You do not have to use
the orange follower that comes with the extension, you can use
the original follower if you wish.
4. Install a follower and the long spring into the tube on the
shotgun and then slide the extension over the other end of the
spring and feed the spring into both tubes as you lower the
extension on to the end of the magazine tube. Then, screw the
extension on to the end of the magazine tube while holding the
tube straight with the barrel.
10
Blue - 7 Shot-15-04-02
Blue - 8 Shot-15-04-03
* Mossberg 835
* Mossberg 835
* Mossberg 835
* Mossberg 835
Blue - 7
Blue - 8
Blue - 9
Blue - 10
* Mossberg 835
* Mossberg 835
Mossberg
Mossberg
Mossberg
Mossberg
930
930
930
930
Mossberg
Mossberg
Mossberg
Mossberg
5500
5500
5500
5500
Shot-02-04-12
Shot-02-04-13
Shot-02-04-14
Shot-02-04-15
Matte Blue - 7 Shot-02-04-22
Matte Blue - 8 Shot-02-04-23
(fits
(fits
(fits
(fits
Matte Blue - 7
Matte Blue - 8
Matte Blue - 9
Matte Blue - 10
Shot-02-04-32
Shot-02-04-33
Shot-02-04-34
Shot-02-04-35
Blue - 7
Blue - 8
Blue - 9
Blue - 10
Shot-02-04-02
Shot-02-04-03
Shot-02-04-04
Shot-02-04-05
935)
935)
935)
935)
Remington
Remington
Remington
Remington
870/1100/1187
870/1100/1187
870/1100/1187
870/1100/1187
Blue - 7
Blue - 8
Blue - 9
Blue - 10
Shot-01-04-02
Shot-01-04-03
Shot-01-04-04
Shot-01-04-05
Remington
Remington
Remington
Remington
870/1100/1187
870/1100/1187
870/1100/1187
870/1100/1187
Matte Blue 7
Matte Blue 8
Matte Blue 9
Matte Blue 10
Shot-01-04-06
Shot-01-04-07
Shot-01-04-08
Shot-01-04-09
Winchester
Winchester
Winchester
Winchester
1200
1200
1200
1200
Blue - 7
Blue - 8
Blue - 9
Blue - 10
Shot-03-04-02
Shot-03-04-03
Shot-03-04-04
Shot-03-04-05
Remington
Remington
Remington
Remington
870/1100
870/1100
870/1100
870/1100
Blue - 7
Blue - 8
Blue - 9
Blue - 10
Shot-01-04-32
Shot-01-04-33
Shot-01-04-34
Shot-01-04-35
Benelli
Benelli
Benelli
Benelli
Nova
Nova
Nova
Nova
20ga
20ga
20ga
20ga
Benelli
Benelli
Benelli
Benelli
Nova
Nova
Nova
Nova
Blued
Blued
Blued
Blued
Lightweight
Lightweight
Lightweight
Lightweight
+2
+3
+4
+5
20ga
20ga
20ga
20ga
Benelli Super Balck Eagle 1 &11
Benelli Super Balck Eagle 1 &11
M1
M1
M1
M1
20ga
20ga
20ga
20ga
Matte
Matte
Matte
Matte
+2
+3
+4
+5
Ext
Ext
Ext
Ext
Blue
Blue
Blue
Blue
-21-04-32
-21-04-33
-21-04-34
-21-04-35
Blue
Blue
Blue
Blue
-21-04-42
-21-04-43
-21-04-44
-21-04-45
+2 Ext Matte Blue -21-04-12
+4 Ext Matte Blue -21-04-14
Benelli Super M1/M2
Benelli Super M1/M2
Benelli
Benelli
Benelli
Benelli
Ext
Ext
Ext
Ext
+2 Ext Blue -21-04-02
+4 Ext Blue -21-04-04
+2
+3
+4
+5
Ext
Ext
Ext
Ext
Matte
Matte
Matte
Matte
Blue
Blue
Blue
Blue
-21-04-22
-21-04-23
-21-04-24
-21-04-25
SHOTGUN ACCESSORIES
Front Sling Mounting Plate for Tactical Shotguns
This steel plate is designed to allow you to mount a sling on the front of your weapon in three different
positions. Easy to install, it goes between the magazine cap or magazine extension & barrel lug.
The position where the sling is mounted below your barrel is the conventional ‘over the shoulder’
military rifle carry position.
This mounting plate, placed facing on either side of your gun will allow you to wear your shotgun in the
ready position like a sub-machine gun is worn. This position places your weapon at your side & gives you
‘hands free’ accesss.
You will need a mounting sling attachment on top & back of your shotgun for it to hang correctly. Please
note that pistol grip shotgun folding stocks have the top mounted sling swivel installed for this very purpose.
Remington/Mossberg 590/930
Will not fit Mossberg 500/600
60-09-30
Combat Bolt Handle
For use with the Remington 1100 & 11/87 & the Mossberg 930/935
semi-auto shotguns. Combat bolt handle is for right handed shooters.
These bolt handle are designed to replace the factory bolt handle.
These handles can be operated with the left hand with ease. The
combat rule being, “never take your hand away from your trigger &
safety”. You should be able to load your weapon & quickly operate
your bolt, both with your left hand. Made from heat treated steel.
No gunsmithing is required. Simply pull the old bolt handle out &
push the combat bolt handle into place.
Remington 1100 & 11/87
01-10-02
Mossberg 930 & 935
02-10-02
Extra Magazine Extensions Springs
Standard on most Extension Kits
Sling Swivel Base Clamp Kit
Add strength to magazine extensions with our sling
swivel base clamp.
Rem. Win. Sling Swivel Base Clamp 1 inch
55-08-01
Rem. Win. Sling Swivel Base Clamp 1 inch
55-08-02
Matte - Blue
Light Weight Base Clamp 20 gauge 1 inch
55-08-07
(If you intend to leave your shotgun loaded with the
Spring Compressed, you will need an extra spring so
they can be rotated to avoid losing their tension.)
7 & 8 Shot Extra Springs
60-09-11
7 & 8 Shot Extra Springs 20 ga. Lt. Wt. Spring 60-09-14
9 & 10 Shot Extra Springs
60-09-12
High Visibility Shell Follower
Avoid spring failure by using one of our High
Visibility Shell Followers. It will protect your spring
and you will be able to tell from a glance if your gun
is loaded or not with the Hunter Orange Color of the
follower.
Remington 870/1100/1187 Shell Follower 01-05-02
Mossberg 500/600 Shell Follower
02-05-02
Winchester 1200/1300/1400 Shell Follower 03-05-02
Ithaca 37 Shell Follower
04-05-02
11
THOMPSON CENTER ACCESSORIES
Encore Folding Stock
This is our folding stock for the Encore rifle. It has an invest
cast steel arm and housing with 1 inch rubber butt pad.
These stocks are made to take the beating of the magnum
calibers that the Encore is available in. When folded it makes
a very compact package for transport.
T/C Encore Folder
09-01-08
T/C Encore Folder SS
09-01-04
Encore Folder
Encore Conventional Stock & Forends
These stocks are the same ones we furnished to
Thompson/Center Co. Like all of our stocks, they are covered
by our life time warranty. The pronounced pistol grip on this
stock helps reduce felt recoil by distributing part of it into
your hand and arm. This allows you to take the recoil over a
larger area. This is very helpful with the magnum calibers
that the Encore is available in.
T/C Encore Butt Stock
09-01-40
T/C Encore Muzzle Loader Forend
09-02-14
T/C Encore Rifle Forend
09-02-16
Encore Muzzleloader
T/C Contender Survivor
The Contender Survivor stock gives you a place to carry
ammo and supplies in the butt stock. The storage
compartments are opened by removing the thumb screw on
the back of the stock and hinging the butt plate down, this
allows access to the two 7 1/2 INCH DEEP BY 2 INCH TALL BY
1 INCH WIDE COMPARTMENTS. This stock is our answer for
the Contender fans that keep their carbine with them all the
time. You can not use this stock with a barrel shorter than
16 inches.
T/C Contender Survivor Stock
09-01-12
T/C Contender Survivor
Stock
Contender & G2 Contender Forends & Grips
Our Contender Pistol Grips & Forends give the shooter the
comfort and control you expect out of your pistol. The pistol
grip features finger grooves and rubber inserts to reduce felt
recoil. The toothpick forend is thin so your pistol is easy to
carry and fits into large holsters better, these are available
for both 10 and 14 inch barrels. THIS WILL NOT FIT THE 14
INCH BULL BARREL.
T/C Contender Forend 10 inch 1 Screw
09-02-08
T/C Contender Forend 14 inch 2 Screw
09-02-10
G2 Contender Rubber Forend
09-02-22
12
T/C Contender
Pistol
THOMPSON CENTER ACCESSORIES
Contender & G2 Contender Butt Stock & Forend
Contender & G2 Contender Folding Stock
These are the same as we furnish to Thompson/Center
Arms Co. These stocks and forends make your
Contender comfortable to shoot and you still have a
compact, light and easy to handle rifle.
T/C Contender Conventional Stock
09-01-04
G2 Contender Conventional Stock
09-01-42
G2 Contender Forend
09-02-18
T/C Contender Forend 2-Hole
09-02-06
The contender folding stock is the answer for
contender users that want a small compact rifle that
can be easily stored and made ready to shoot in just
a second. With an all steel cast housing and hinge
these stocks will take the hardest use you can dish
out. Comes with a 1 inch rubber recoil pad and sling
loops on bottom of the grip and the top of the
folding housing. All BATF regulations must be
complied with when using this stock.
T/C Contender Folding Stock
09-01-06
T/C Contender Folding Stock (S.S.)
09-01-10
G2 Contender Folding Stock
09-01-16
G2 Contender Folding Stock (S.S.)
09-01-17
Telescoping Pistol Grip Stocks
Our new telescoping pistol grip stocks are a combination of our folding stock and our AR-15 telescoping stock.
The telescoping stock is attach to our pistol grip stock with a black anodized all aluminum housing. Our stock
is not screwed into plastic like some in the market. Great for shooters with short lengths of pull, makes a great
kids starter stock that can grow with the youngster.
Mini-14 Pistol Grip Telescoping Stock
07-01-42
10/22 Pistol Grip Telescoping Stock
07-01-52
M-1 Pistol Grip Telescoping Stock
08-01-06
Marlin Camp 9/45 Pistol Grip Telescoping Stock
14-01-05
SKS Pistol Grip Telescoping Stock
18-01-06
13
H & K FOLDERS
There are three basic categories of H&K Stocks
1. On the model 91 rifle. The back of the receiver has two
attaching pins. They are located horizontally, one in front of
the other (parallel to barrel).
2. The 93, 94 & MP-5 family of weapons. The stock is held on
with one push-out pins. In this family of weapons there are
two style of butt stocks. The early model had a steel housing
with the stock attached to the housing. The later model is an
all synthetic stock that fits over the receiver & holds the
trigger group in place.
3. The latest stock we make for H&K is for the MP5-PDW and
SP-89. The stock is held on the weapon by two push-out pins.
The pins are one above the other, vertical to the bore.
Developed to maximize the concealment and maneuverability
in tight quarters. These are the same stocks that Heckler
and Koch put on their factory weapons. They are quick
opening and are very durable. They come with the Choate
logo as well as the Choate lifetime warranty.
Fits the 93-94 . Must have a 16 inch barrel or longer to be
legal or be registered with the BATF.
H&K 93-94 Folding Stock
15-01-03
H&K 93-94 Adjustable Length
15-01-13
of Pull Folding Stock
Quick opening, locks solid in the open position. Fits 91
rifles variants including the CETME. Only legal for rifles
with 16 inch or longer barrels or on an BATF registered
weapons.
H&K 91-G3 Folding Stock
15-01-02
H&K 91-G3 Adjustable Length
15-01-12
of Pull Folding Stock
Fits the MP5-PDW and SP-89. Only legal for rifles with 16
inch or longer barrels or on an BATF registered weapons.
H&K MP5PDW Folding Stock
15-01-04
H&K MP5PDW Adjustable Length
15-01-14
of Pull Folding Stock
New folding stock for the GSG-5. Same as all our H&K
folding stocks. Only legal for rifles with 16 inch or longer
barrels or on an BATF registered weapons.
GSG-5 Folding Stock
15-01-24
GSG-5 Adjustable Length of Pull Folding Stock 15-01-34
Metal and plastic end caps
MP5-PDW Steel end cap
MP5-PDW Steel end cap with swivel
HK93/94 Plastic end cap with swivel
GSG5 Plastic end cap
14
15-01-09
15-09-02
15-09-03
15-09-04
H & R STOCK & FORENDS
H&R Varmint Stock
Turn your H&R Handi-Rifle or Sportster into a varmint rifle. The varmint stock will give your rifle all the qualities needed
to be a varmint or target gun. It has our spacer system for adjustable length of pull. A cheek piece can be added for use
with tall scope mounts. Stock will fit all NEF and H&R single shot rifle and shotguns except the 10 gauge.
NEF and H&R Varmint Forend with Bipod "T" rail.
19-02-08
NEF and H&R Varmint stock
19-01-16
Survivor Stock Store-Arm Forend
Survivor Stock
The H & R Survivor stock has a 3 /2 x 7 x 1 inch storage compartment that lets you store ammunition or survival
gear. The butt plate has a thumb screw that lets you swivel the pad to the side for easy access to the storage. Our
Store-Arm forend has two storage compartments one 1 x 11/2 x 51/2 inches and one 1 x 11/2 x 3 inches. It has a thumb
screw that lets you remove the forend to get to the storage and allows for quick disassembly of the gun. Stock will
fit all NEF and H&R single shot rifle and shotguns except the 10 gauge.
H & R Survivor Stock
19-01-06
H & R Store-Arm Forend
19-02-02
1
Monte-Carlo Stock & Conventional Forend
Conventional Stock
H&R conventional & Monte Carlo stocks come with a 1 inch rubber recoil pad and quick detach sling swivels. The Monte
Carlo stocks have a raised comb for use with scopes. Old style Monte Carlo stock has a length of pull of 141/8 inches
and the new checkered Monte Carlo stocks has a length of pull of 135/8 inches. Youth stocks have a length of pull of
121/8 inch.
H & R Conventional Stock
19-01-08
H & R Conventional Forend (Has 1 inch swivel stud)
19-02-04
H & R Conventional Forend (With Checkering)
19-02-01
H & R Youth Stock
19-01-24
H & R Old Style Monte Carlo Stock
19-01-26
H & R Monte Carlo Stock (With Checkering)
19-01-18
Choate Stock for H & R Tamer .410 Model shown 4-shells
Tamer Stock
Our Tamer stocks give you the convenience to store shells on your H & R firearms. They will aid in speeding up your
follow up shots with your single shot shotgun by placing extra shells in easier reach, with a length of pull of 121/8
inch. For a compact home defense weapon you can put a pistol grip and store-arm forend together for an overall
length of 26 inch. The barrel must be 22 inch, with the grip, in order to comply with BATF. These stocks fit 12, 16,
20, 28, .410 GA. and all rifles.
H & R Tamer FE (Does not have swivel stud)
19-02-06
H & R Pistol Grip
19-03-02
Tamer Buttstock .410 Model (holds 4 shells)
19-01-12
Tamer Buttstock 20 Gauge Model (holds 3 shells)
19-01-14
Tamer Buttstock 12 Gauge Model (holds 2 shells)
19-01-22
15
AR15 / M16 ACCESSORIES
Choate Telescoping M4 Stock Kit
Choate’s new telescoping AR15/M16 Stock Kit. This five position telescoping stock has two storage
compartments with O-ring sealed screw in caps. The storage compartments are water tight and will hold
two AA or three 123 Lithium batteries in each side. The stock has a nonslip hard rubber butt plate. There
are three places to attach a sling, one on bottom, a slot through the stock and a detachable sling swivel
in the middle which can be moved from one side to the other. The aluminum recoil buffer tube and storage
compartment caps are anodized in a matte black finish.
This stock was designed to be the strongest, toughest AR15/M16 stock on the market. It will support
the weight of the front tire on a full size pickup truck. It will also withstand the recoil from hundreds of
rounds of 12 ga. 3 inch magnum buckshot and slugs. This stock is sold as a Kit and includes the recoil
spring, recoil buffer, buffer tube, receiver end plate, reciever nut and stock. It is also available to fit MilSpec tubes for people who want to upgrade there stock without removing the recoil buffer tube on their
rifles with Mil-Spec tubes.
M16/AR15 M4 Stock Kit
16-01-04
M16/AR15 M4 Mil-Spec Stock only
16-01-06
Ambidextrous Sling Attachment End Plate
This steel plate is designed to allow you to attach a single
point sling to your weapon. This plate will provide a
mounting ring on the left & right top side of your weapon
between the stock & the back of the receiver. This will allow
you to have “hands free” & still have your weapon at the
ready position.
AR15/M16 AMBI Receiver End Plate
60-09-61
Choate’s E-2 Style Stock for M16 & AR15
Here is an alternative to the G.I. Stock. Made of tough
fiberglass polymer. Our stock adds 3/4 inch to the length of
pull to the A1 rifles and a 1/4 inch to the A2 rifle. This almost
doubles the amount of storage space. This stock also features
an “Off Hand” notch to grasp when firing from a prone
position using a bipod. A butt plate is not included. The G.I.
issue butt plate fits the stock.
M16/AR15 E-2 Butt Stock
16-01-02
Extended Butt Pads
The issue M16/AR15 stock is too short for some people. This
pad lengthens the stock by 11/4 inch. Made of black fiberglass
filled plastic and installs in minutes using a screwdriver and
a 5/32 inch allen wrench.
M16/AR15 Extended Buttpad
16-09-02
16
SELF DEFENSE TOOLS
Car Tool
Tool has a hardened window breaker, Razor sharp seatbelt
cutter, Philips screw driver tip and an Ice scraping edge. Keep
this attached to your visor with a couple of rubber bands or
attach it to your seat belt post with a piece of thin string just
in case you get in a wreck. Having the ability to cut a seat
belt or break a window just might save your life.
Car Tool Black
60-09-25
Car Tool Orange
60-09-26
Kubotan
The Kubotan self-defense keychain is a close-quarter selfdefense weapon. It is slightly thicker than the same size as
a marker pen. Attach a key ring for convenience and
concealment, the Kubotan appears as an innocuous key fob
to the untrained eye. With keys attached, it can also function
as a flailing weapon.
Kubotan
50-08-51
Executive Letter Opener II
Made of fiberglass filled plastic. These letter openers can be
driven through 1/2 inch plywood with minimal damage,
needing only to be re-sharpened with a finger nail file.
Measure 13/16 inch wide, 73/4 inch long and blade length of 41/2
inch. Weight only 2 ounces. These letter openers can be
carried under a watch band, in a sock, shirt or jacket. It can
also be worn on a lightweight cotton string around the neck
or taped anywhere on the body.
Executive Letter Opener II
50-08-31
ACE of Spades
The Ace of Spades is a great personal defense weapon. It is
made of fiber filler plastic so it is light and durable. It has a
convenient push-pull shape and can be attached to a keychain. Measures 33/4 inch x 21/4 inch x 3/8 innch
Ace of Spades
50-08-01
Executive Ice Scraper
Made of black fiber-filled plastic. Measures 25/8 inch wide, 3
1
/2 inch long and 3/8 inch thick. These ice scrapers are held by
inserting the middle finger in the hole, with rounded end in
palm, making a fist. Can be used as ice scraper, key ring and
ideal for ladies self-defense weapon. Lifetime warranty.
Executive Ice Scraper
50-08-11
17
CHOATE TACTICAL STOCK
Remington 700 Short Action BDL
Remington 700 Short Action ADL
Remington 700 Long Action BDL
Remington 700 Long Action ADL
Remington 700 Short Left BDL
Remington 700 Short Left ADL
Remington 700 Long Left BDL
Remington 700 Long Left ADL
Savage Center Feed Short Action
Savage Detachable Mag Short Action
Savage Short Action 10
Savage Long Action 110
Savage Short Action Left 10
Savage Long Action Left 110
18
25-01-01
25-01-05
25-01-03
25-01-07
25-01-02
25-01-06
25-01-04
25-01-08
25-06-02
25-06-01
25-06-12
25-06-14
25-06-13
25-06-15
FEATURES
(A) The 1 inch recoil pad is designed to dissipate and absorb felt recoil.
It is made of rubber and will not slip from your shoulder.
(B) The length of pull can be adjusted from 13 1/4” out to 14 ½”. The
stock comes with one 1/2” adjusting spacer. Additional spacers are available
at a nominal cost. They come in 1/4, 1/2 and 3/4 inch in thickness. You will
also get a set of longer screws when you order additional spacers. (note: we
designed the stock, starting short, to fit the law enforcement snipers that must
wear thick body armor.)The spacer system was designed to make the length
of pull adjustable for all shooters. To add LOP, simply add the appropriate
spacers.
(C) The sling studs mounted on the side of the rifle (both front and
rear)are designed to assist the shooter in a low crawl position where the rifle
is draped across the foream or when worn across the chest. These side
mounted sling swivel studs go through a cored hole in the stock. In ‘from
rest’ shooting, the conventional bottom mounted sling studs get in the way
and are usually removed. A sniper crawling on his belly carries his rifle on
top of his upper arm and/or across his back while holding the sling in his
hand. A side mounted sling is perfect for this application.
D) The comb of the stock is designed to be inline and height appropriate
for a low profile scoped rifle. The stock is not furnished with a cheek piece,
however, our standard and tall cheek pieces will fit it and can be ordered if
needed. The standard height is for medium scope rings. The tall cheek piece
is for the large objective scopes that require the tall rings. There are positions
to accommodate all shooters. Also the cheek piece can be turned around for
the left hand shooters.
(E) This off hand holding notch has been on machine guns since before
World War II. The advantage of this feature in a sniper stock is that you can
now hold your butt stock on your shoulder with your off hand. This allows
the trigger hand to relax and concentrate only on the trigger pull. This off
hand hold has been proven to be beneficial over the years.
(F) The grip cap covers a storage area in the stock. For some, the weight
of the rifle is not a factor. And in some cases extra weight is wanted. If you
need more weight to your stock you may pour the cored out area full of lead
shot and screw the cap back on
(G) The bedding block is the most important part of the stock. Our
bedding block in the new Tactical rifle is a one piece of aluminum, going
from the rear of the receiver to the end of the T-Rail. The receiver of the rifle
only touches the stock/bedding block in four places, both sides of the ‘V’ in
front and in back. The pillar blocks allow a 55/65 inch lbs. torque on the
receiver screws. The CNC machined bedding block is molded inside the
stock.
(H) The trigger guard area is made to use the trigger guard (and/or
hinged floor plate on a BDL rifle) from your rifle. Both models are available
in Remington and Savage actions.
(I) Bolt action screw holes are reinforced with an aluminum pillar. This
allows consistent torqueing of the action screws to factory specifications. It
also adds strength to the support of the bedding block and keeps it stable and
consistent.
(J) This ‘T’ rail allows many accessories to be placed on your rifle. We
furnish a solid steel detachable sling swivel stud . This is for the mounting
of a Harris bipod only. We offer two types of ‘T’ bars, one has a quick detach
thumb screw, the other mounts with the Harris bipod. Snipers will want two
bipods mounted, short for prone and tall for sitting position. These additional
‘T’ bars(long and short) are available at a nominal cost.
(K) The forend is 2 3/8” wide to also assist in holding the rifle in a stable
shooting position.
(L) The barrel channel is large enough to free float a 1 1/4” diameter bull
barrel. This flat surface, parallel to the barrel, is for the shooters that have/use
sandbags. It is helpful if the rifle doesn’t fall over every time you take your
hands off the rifle.
(M) The bipod ‘T’ bar, mentioned in (G) is made from solid steel and is
about 5” long and it will fit the swivel type or solid bipod. There are many
different uses and applications for this accessory other than a bipod. If you
have a need for a special accessory, your local gunsmith won’t have any
trouble duplicating the dimensions.
Custom Tactical
The Custom Tactical has the following features:
1. Butt plate mounts with a common allen/hex wrench.
2. The length of pull can be adjusted from 0 to 1.5”.
3. The butt plate can be swiveled/rotated to any angle, 360 deg.
4. The butt plate has 2 inches of vertical, up or down, adjustment in the dovetail slide.
5. The butt palte has a non slip rubber butt pad.
6. Has an adjustable cheek piece.
19
THE ULTIMATE SNIPER STOCK
DESIGNED & ENDORSED BY
MAJOR JOHN PLASTER
* Design Patent Pending
* Utility Patent Pending
20
Remington 700 Short Action
Remington 700 Long Action
Remington 700 Short Left
Remington 700 Long Left
Savage Center Feed SA
Savage Short Action
Savage Long Action
Savage Short Action Left
Savage Long Action Left
Winchester 70 Short Action
Winchester 70 Long Action
22-01-09
22-01-11
22-01-13
22-01-15
22-06-15
22-06-05
22-06-01
22-06-07
22-06-03
22-03-03
22-03-01
FEATURES
(A) The grip cap covers a storage area in the stock. For some snipers, the
weight of the rifle is not a factor. And in some cases extra weight is wanted. If
you need more weight to your stock you may pour the cored out area full of lead
shot and screw the cap back on. It is also possible to put basic (pull through)
cleaning kit in this area. We also noticed that eight 30-06 rounds will fit in the
grip for emergency ammo.
(B) This ‘T’ rail allows many accessories to be placed on your rifle. We
furnish a solid steel ‘T’ bar with a detachable sling swivel stud installed. This is
for the mounting of a Harris bipod. Many other accessories may be mounted on
this bar. The ‘T’ bar has a quick detach thumb screw. Some snipers will want two
bipods mounted, short for prone and tall for sitting position. Additional ‘T’ bars
are available at a nominal cost.
(C) This area is flat to stabilize the rifle when
shooting from a rest. It is 1 1/2 inch wide and heavily
serrated. The elevation fine adjusting knob (Q) can be
removed, leaving a 3/8 threaded hole and the stock
totally flat on bottom.
(D) The forend is 2 3/8 inch wide to also assist in
holding the rifle in a stable shooting position.
(E) The length of pull can be adjusted from 13 1/4
inch out. The stock comes with one 1/2 inch adjusting
spacer. Additional spacers are available at a nominal
cost. They come in 1/4, 1/2 and 3/4 inch in thickness.
You will also get a set of longer screws when you
order additional spacers. (note: we designed the stock,
starting short, to fit the law enforcement snipers that
must wear thick body armor.)
(F) The stock is furnished with two cheek pieces.
The standard height is for low scope rings. The tall
cheek piece is for the big lens scopes that require the
tall rings.
(G) The position of the cheek piece is adjustable.
There are three positions to accommodate all shooters.
Also the cheek piece can be turned around for the left
hand shooters.
(H) The bedding block is the most important part
of the stock. The receiver of the rifle only touches the
stock/bedding block in four places, both sides of the ‘V’ in front and in back. The
pillar blocks allow a 55/65 inch lbs. torque on the receiver screws which is not
possible with wood or most synthetic stocks. The CNC machined bedding block
in molded inside the stock, not fiberglassed in after the stock is made.
(I) The barrel channel is large enough to free float a 1 1/4” diameter bull barrel.
(J) See feature (A)
(K) The four slots are for the attaching of camo material. Most sniper experts
agree that it adversely effects accuracy to attach camo to a barrel and there are no
accommodations on most stocks for camo material. We haven’t done any testing
but common sense would tell you that the slots would also help dissipate barrel
heat.
(L) These side mounted sling swivel studs go through a cored hole in the
stock. In ‘from rest’ shooting, the conventional bottom mounted sling studs get in
the way and are usually removed. Major Plaster explained to us, during the design
phase of this stock, that a sniper crawling on his belly carries his rifle on top of
his upper arm and/or across his back while holding the sling in his hand. A side
mounted sling is perfect for this application.
(M) The stippling in the grip areas is unusually aggressive and rough to the
touch. Major Plaster wanted it that way. Some shooters wear gloves and the
rough texture is needed. If you want a smoother grip surface, sand the areas until
the desired feel is found. The stock is about 1/4 inch thick in this area so don’t
worry about sanding the texture down. Also please notice that the front grip area
is narrowed. It is this narrowed size to accommodate a one hand carry of the rifle.
Major Plaster complained that most sniper/tactical stocks are very fat in this area
and very difficult to carry one handed (suit case style) at the balance point. We
fixed the problem.
(N) This section of the forearm had a pronounced angle for two reasons. When
the bipod is folded up it doesn’t leave a 2 inch gap between it and the barrel. The
bipod feet are very near the barrel and will catch fewer limbs and twigs when
crawling prone. The second reason for the angle is for quick elevation adjustment
of the barrel when the forend is resting on a support. When you push the stock
forward the barrel goes up. When you pull the stock back the barrel elevation is
lowered. This is so simple that no one seems to have thought of it before or didn’t
think it was important enough to include on a stock.
(0) This flat surface, parallel to the barrel, is for the shooters that have/use
sandbags. We are told that real snipers wait and watch much more than shoot. It
is helpful if the rifle doesn’t fall over every time you take your hands off the rifle.
This area has heavy, 1/8 inch, serrations as on the bottom of the butt area.
(P) This off hand holding notch has been on machine guns since before World
War II. The advantage of this feature in a sniper stock is that you can now hold
your butt stock on your shoulder with your off hand. This allows the trigger hand
to relax and concentrate only on the trigger pull. This off hand hold has been
proven to be beneficial over the years. It is a feature that the expensive, labor
intensive, hand laid fiberglass stock makers find very difficult to incorporate into
their design.
(Q) This is a fine adjusting screw for elevation. The bench rest shooters and
prairie dog hunters will really like this feature.
consider this, a one degree turn on this elevation screw
will raise or lower the stock only .00017 of an inch.
This is truly fine adjusting. This screw has about 2 inch
of engagement and can be removed with ease when
not needed. It is very easy to adjust with the thumb and
index finger on either side of the stock. We have found,
in the prototype stage of design, that the coarse
adjustments can be made with the bipod legs and the
‘spot-on’ adjustment done with the screw.
(R) The rubber recoil pad has five height settings
possible. The center setting lines up with the stock and
there is two 1/4 inch positions up and two down. One
of these five positions will surely meet your needs.
(S) The bipod ‘T’ bar, mentioned in (B) is made
from solid steel and is about 5 inch long and it will fit
the swivel type or solid bipod. There are many
different uses and applications for this accessory other
than a bipod. If you have a need for a special
accessory, your local gunsmith won’t have any trouble
duplicating the dimensions.
(T) We, Major John Plaster and Choate Machine &
Tool, Inc., have a design patent pending as of 11/22/96
and a Utility patent pending as of 10/29/96.
There are some points of interest not mentioned
above that we will mention here. The ULTIMATE SNIPER stock has our usual
LIFE TIME WARRANTY. The stock is made of DuPont Rynite SST-35. It is
one of the most expensive polymers and the most suitable for gun stocks if weight
is not a consideration. We mold the stock in dark O.D. green color. Rynite takes
paint very well so you can paint your stock with almost any automotive spray can
paint. The available duck boat camo paint works very well. The rubber recoil pad
is a little on the stiff side because it is much more durable at this durometer than
a cushy pad, with a 3/4 inch compression, can allow a shooter to get a scope eye
piece hit in the eyebrow. Hell, you could loose your scopes ZERO on a deal like
that.
We predict that this stock will be a benchmark for sniper rifle stocks in the
future. We have features that the hand laid fiberglass/kevlar stock makers cannot
incorporate into their stocks. What we have done is eliminate most of the
expensive hand labor and passed the savings on to you. We are keeping the price
down so that most rifle owners can afford a stock. We realized the only way for
this stock to sell enough to pay off the expensive tooling cost was to get the price
low enough so the average guy can buy one. There aren’t enough real snipers,
military and police, to support this project if every one of them bought a stock.
We think that there will be many deer rifles installed in this stock. Most shooters
know what free floating the barrel and a bedding block does for a rifle, it closes
the group to about 1/2 it’s normal group.
We showed this stock for the first time at the 1997 SHOT show. We have never
had a product that generated so much interest and excitement. Every dealer and
distributor that saw it wanted to stock it. Major John Plaster did an outstanding
job on this stock design and he gets full and total credit for it. We would like to
mention his book THE ULTIMATE SNIPER. It is everything you ever wanted
to know about sniper rifles and sniping. He has also produced two Videos on
sniping that go into great visual detail on sniping and the equipment. His latest
book is about this three tours in Viet Nam with the Special Forces. The book title
is S.O.G. You can purchase these books and videos from Delta Group. Their
order number is 1-800-852-4445.For information concerning stocks call us at 1800-972-6390.
21
THE ULTIMATE VARMINT STOCK
Remington 700 Short Action
Remington 700 Long Action
Remington 700 Short Left
Remington 700 Long Left
Savage Center Feed Short Action
Savage Short Action
Savage Long Action
Savage Short Action Left
Savage Long Action Left
Winchester 70 Short Action
Winchester 70 Long Action
24-01-10
24-01-12
24-01-14
24-01-16
24-06-03
24-06-04
24-06-02
24-06-08
24-06-06
24-03-04
24-03-02
* DESIGNED BY MAJ. JOHN PLASTER U.S. ARMY RET., ONE OF THE WORLDS LEADING
AUTHORITY & INSTRUCTORS IN LONG RANGE VERY ACCURATE SHOOTING
22
FEATURES
(A)
This is the elevation adjusting knob. If you are on a hard surface
you can use it without the block. If you are in the field we suggest
you can carry a 2 inch x 4 inch x 6 inch wood block. You can make
your coarse adjustment with your bipod and one of the block
heights will put you in your adjusting range of the screw. The
screw moves the stock 1/16 th of an inch per revolution. You can (I)
get really fine on your elevation adjustment.
(B) This is a 1 inch thick rubber recoil pad. If you are shooting a big (J)
caliber rifle you will appreciate this ‘cushy’ pad.
(C)
(D)
(E)
(F)
(G)
(H)
This area has coarse 1/8 inch serrations. These are to assist in
holding the rifle in place while shooting from sand bags. This area
is also flat at the bottom. The rifle sits upright, it doesn’t have to be
held constantly.
(K)
This is a 1/2 inch spacer that can be removed for a shorter length
of pull. Your stock will come with 1/4 inch, 1/2 inch and 3/4 inch
spacers and the screw set to give you many combinations of length (L)
of pull you need. The spacer blocks are interlocking (nesting) so
alignment is assured.
The grip cap is held in place by two screws. Inside the grip is a void
to save plastic. This can be used to insert a counter weight if you
need more stock weight, or you can put emergency ammo in the
grip. It will hold 8 rds. of 30-06 ammo or what ever.
accomplished before in a molded stock. The bedding block,
support pillars and barrel ‘U’ channel (I) are all one piece. Anyone
that has any experience in machining or stock making will tell you
that this is the very best way to make a rifle stock.
Like (H), this is the forearm ‘U’ channel that is molded into the
stock for rigidity. It is welding to the bedding block.
The barrel channel is 1 1/4 inch wide. This will assure that any
production rifle barrel will be free floating. This clearance ensures
that your receiver only touches your stock in five places, both sides
of the front and back ‘V’ bedding block and the recoil lug area. If
you have a custom rifle barrel that is larger than 1 1/4 inch you can
simply inlet it as you would a wooden stock.
This area has coarse 1/8 inch serrations to retard the rifle from
sliding or slipping on sand bags.
This feature is a quick detach bipod adaptor. We have a patent on
this design. You can now install or detach your bipod in seconds.
Simply turn the thumbscrew and slide it in or out. Some Law
Enforcement officers and varmint hunters will really appreciate
this feature. You have the option of using a bipod to shoot from a
sand bag, you can have a short leg bipod for prone shooting and a
long bipod for shooting in tall grass from a sitting position. All
these options can be done in a few seconds. The bipod adaptors are
designed for the very well engineered Harris bipods. Extra
adaptors are available, contact us at 1-800-972-6390.
This stock comes with two cheek pieces. You get a regular height
and 5/16 inch taller. The taller cheek piece is for the people who use
the big objective lens scopes and then have to use the tall rings. You (M) This is the bipod adaptor rail. The rail is flush with the bottom of
have the option of three locations, center, forward and back. You also
the forearm and held in place with three #10 machine screws. An
have the option of reversing the cheek pieces if you are left handed.
endless variety of accessories can be put into this port from the
The cheek pieces are thick so you can shave, grind or sand them into
bipod, to night light, to you name it.
a custom height or contour.
(N) The forearm is 2 7/16 inch wide. This helps the rifle stability while
This is the off-hand notch. We learned this trick from the German
shooting from sand bags or a solid horizontal rest.
MG-42 machine gun. We also designed and built the new
NAVY/MARINE M-240 machine gun stock with this same feature. (O) The trigger guard is molded in place as part of the stock. It is larger
When you use a bipod or shoot from a sand bag you can use both
than usual to allow the shooter to wear gloves when necessary.
hands to hold the butt of the rifle in place and steady on your
shoulder.
(P) We furnish you with a new set of receiver screws. They are grade
8 Tool and Die quality hex socket machine screws. They should be
Molded inside the stock is a bedding block that is C.N.C.
torqued to 55 to 65 inch pounds (NOT FOOT POUNDS) of
machined from a solid billet of aluminum. The receiver screws are
torque. With out the aluminum bedding pillars this would not be
also supported by solid aluminum pillars that are part of the
possible. Try this in a wood or plastic stock and you will split it
bedding block/forearm insert. The rest of this machined part is the
wide open. This high torque assures that your rifle and new Choate
‘U’ channel (I) that is molded into the forearm barrel channel. This
stock are bolted together until you want them apart.
adds rigidity and stability to the forearm area that had never been
23
FOLDING SNIPER STOCK / RIFLE STABILIZER
The folding sniper is built off the designs of Maj. John Plaster
U.S. Army retired. It takes away the two bulkiest parts of the
stock in order to make it light and maneuverable. The
aluminum v-block that makes the Ultimate Sniper so
accurate is also utilized in the Ultimate Sniper Folder. The
recessed front hand grip is also still present. The sloped
forearm is cut off so there is no t-rail bipod adapter. The
adjustable butt stock is removed and a folding housing and
arm added. The arm is molded with a fixed cheek piece to
raise the shooter’s line of sight. The Ultimate Sniper Folder
folds to make the rifle 101/2 inches shorter than when
extended. It weighs only 31/2 lbs. That makes the Ultimate
Sniper Folder 1/2 the weight of our Ultimate Sniper Stock. This
stock is great for a pack rifle or for use in a patrol car.
Remington 700 Short Action
22-01-27
Remington 700 Long Action
22-01-28
Savage Short Action
22-06-10
Savage Long Action
22-06-09
Winchester 70 Short Action
22-03-06
Winchester 70 Long Action
22-03-05
Choate Machine and Tool is now distributing a revolutionary
shooting support. It was developed by a renowned sniper
instructor, Major John Plaster, and promised to dramatically
improve rifle and handgun accuracy in all offhand shooting
positions.
This new device -dubbed, “The Rifle Stabilizer”, clips over the
shooter’s belt. It can be carried conveniently out of the way when
walking. Yet folded up in an instant to provided a stable shooting
platform. In test firing a .223 rifle, Plaster was able to hit a
bowling ball size target -offhand- at 500 yards.
The stabilizer equally improves sitting and kneeling shooting
and can be used with any rifle, pistol, or shotgun. Fred Choate
said, “I couldn't believe how steady I could hold my handgun and
how accurately I could shoot.” The stabilizer comes with
interchangeable tips to accommodate pistols or rifles.
Unlike various bipods and shooting supports, the Rifle
Stabilizer adds no weight, length or bulk to the firearm and
dramatically steadies even the heaviest rifles. Intended primarily
for hunters, it hangs free at the shooter’s side when not in use,
then can be raised instantly for accurate, supported shooting.
“We are confident in this product,” said Choate. “In fact, we'll
refund its price to anyone whose off hand groups aren't cut in
half, but I don't think shooters will want to part with it after
using it.”
Rifle Stabilizer
24
60-09-21
MISCELLANEOUS PARTS
Competition Shell Holder
Designed for the Shotgun Competitor. This shell holder fits on
your belt, (will fit 1 3/4 inch belt), for quick access to six 2
3
/4 .12 gauge shells.
Shot Shell Caddy
60-09-22
Shot Shell Holder
With our shot shell caddy, you can carry extra shells virtually
anywhere. These 2 shell holders come standard with a steel
belt loop or plastic belt strap. You can mount them on your
gun sling, your boat seat or carry them on your belt. The
possibilities are endless. You can also mount several together
for more shells. (Will accept up to 13/4 inch belt)
Shot Shell Holder (Belt Loop Model)
60-09-50
Shot Shell Holder (Back Plate Model)
60-09-51
Magazine Connectors
Now you can increase your fire power 100% with Choate’s
Magazine Connectors. Constructed of two steel plates on
front and back and a plastic filler blocks in the center. This
superior design has several advantages. Both mags point
upward. This enables the shooter to use a bipod in a prone
position without damaging the feed lips or getting dirt in the
magazine. To load the second magazine, just move the first
mag over and reinsert.
M-16/AR-15 Magazine Connector
51-08-01
AK47 Magazine Connector
51-08-06
P Mag Magazine Connector
51-08-02
Mini-14 Recoil Compensator
Choate Recoil Compensator for Mini-14 made of solid steel,
bath blued or S.S. Both models sight looks like the original
M-14 Sight. The compensator is permanently attached to the
gun barrel by a 1/8 inch spring steel roll pin. We suggest this
unit be installed by a gunsmith.
Mini-14 Cage
07-07-12
Mini-14 Cage Stainless Steel
07-07-13
M14 Look-a-Like
07-07-14
M14 Look-a-Like Stainless Steel
07-07-15
Mini-14 Cage 580 Series & Higher
07-07-22
Mini-14 Cage 580 Series & Higher (S.S.)
07-07-23
Note: All Mini-14 rifles made after the 580 series have a .625 (or 5/8) inch barrel.
Rifles in the 180-580 series have .562 (or 9/16) inch barrel.
25
ADDITIONAL INFORMATION
Our new Tactical, Ultimate Sniper, and Ultimate Varmint Stocks have our usual lifetime warranty. They are made out of
20% fiberglass filled polymer. If you break your stock, send it back, we want to see it. Plus you will get a new one, free.
Major John Plaster, the stock designer, has done his usual fantastic job in design. His work has made him a legend in his
own lifetime. We hope you will agree with us and realize that this stock is a run-away good deal. As far as we know we
are the only company that offers a inject molded varmint stock. The only alternative to our stock is wood or the very
expensive hand laid fiberglass stocks that are foam filled. What we have done is invest in very expensive, complicated and
high tech tooling that eliminates all of the expensive hand labor. We pass the saving on to you. It’s simply 21st. Century
technology saving you money. We will attempt to answer some of the most asked questions in advance. Some are brand
specific and may not apply to your rifle.
The original bipod attaching lug is designed to allow for the quick change or quick removal of the bipod. In
this case the bipod attaches to the longer lug and the lug is held in position on the rifle with a thumb screw.
(Note) Many real military & law enforcement snipers use three bipods, short bipod for prone & bench shooting,
medium length is for shooting over a barricade or medium grass, & long three section bipod is for shooting from
the sitting position where the grass is tall.
The permanent short bipod mounting lug is used to attach the bipod when it is not intended for quick removal.
It’s advantage is that it adds more stability. The outer rails of the bipod comes in contact with & tighten down on
the forend on the stock.
Q.
A.
Q.
A.
Q.
A.
“How much does the stocks weigh?”
The Varmint weighs about 4 pounds and the Sniper weighs 6 pounds, 14 ounces. Tactical stock weighs 3 lbs., 10
ounces. Additional weight can be added in the grip area, inside the butt and the barrel channel. Epoxy and lead shot
make a good weight and you can dig it out if you change your mind.
“What is the difference between the Remington ADL & the BDL rifles?”
The BDL, their deluxe rifle, has a hinged floor plate assembly. This allows you to remove ammunition through the
bottom of your rifle. The ADL has a trigger guard only with out the hinged floor plate. The magazine well on the
ADL is blind bottom & does not open to the bottom side of the rifle. All of the rifle manufacturers make a less
expensive model with a blind bottom magazine well. Our stock also has a blind bottom magazine well. This way we
can make a stock for both models without doubling our inventory. If you can’t live without a hinged floor plate your
local gunsmith will be glad to custom fit one to your stock just like installing it in a wooden stock. But don’t ask us,
we don’t do custom work.
“How do you install the shell follower & spring in the new stock?”
Place it in the new stocks molded-in magazine well and set the rifle on top. Make sure it moves freely before you
tighten and torque the screws down.
Here are some dimensions that might help you identify your receiver
receiver screws.
Remington
short action 6.500 /
Winchester
short action 7.031 /
Savage Old Style short action 4.275 /
Savage New Style short action 4.410
Q.
length. These are the distances between the two
long action
long action
long action
7.350
7.570
5.062
”Do you make or plan to make; a stock for the Savage series ‘J’ rifle made between 1978 & 1985 that has
a bolt spread of 4.500; the pre-64 Winchesters / the Winchesters left hand rifles / the Winchester, Savage
& Remington long action detachable magazine rifles?”
A.
No, sorry, the demand is not great enough to justify the tooling expense or to add more models to our inventory.
A.
No, the feed lips on the BDL and ADL rifles are cut into the bottom of the action and the feed lips on the detachable
mag. rifles are in the magazine itself.
Q.
“Can I put my BDL or ADL rifle in to one of the Detachable magazine stocks so I can use detachable
magazines?”
26
QUESTIONS AND ANSWERS
Q. “What Remington rifle will your stocks fit?”
A.
Our Sniper, Varmint, and Tactical stocks will fit the current production model 700 long and short action
rifles in right and left hand, and it will fit rifles with triangular barrels. We also make a short action
Varmint and Sniper stock for the detachable magazine rifles. It will fit the Sportsman 78, 721 and 722
Remington rifle with a small amount of material removed from the safety area. We do not make one to
fit the long action 700 detachable magazine rifles or the model 710, model 7, model 788 or the XP100
action.
Q. “Do you make a stock to fit the Ruger 10/22 in .22 WRM or the Ruger Deer Field .44 mag.?”
A.
No, we don’t have any plans to make stocks for these rifles at this time.
A.
This stock was designed specifically for the MAK 90. We have had people put it on other AK 47’s by
modifying them. We do not do the modifications here, we recommend that it be done by a gunsmith.
A.
If you make a change to any of our products this will void your warranty. This includes but not limited
to drilling holes, cutting, filing, carving, screwing or scratches. We have had stocks returned that have
been cut off or fitted to guns they were not designed for, then when it did not work they returned the part
for refund or replacement. If you break one of our parts or stocks, we will fix it or replace it as soon as
possible. If the part does not work, contact us so we can fix the problem, if you modify it and it does not
work, we will not replace your part.
Q. “Will my AK 47 fit the MAK 90 stock you make?”
Q. “If I modify one of your parts and can’t make it fit, can I send it back?”
Q. “Can I put a pistol grip or folding stock on my Rem. 1100-1187 or Mossberg 5500/930/935?
A.
No, the spring and tube that pushes the bolt forward to function the action protrudes from the back of
action for several inches and prevent the use of a pistol grip or folding stock.
A.
Sorry, we do not make wood or do custom work.
A.
All but the early short actions rifles will fit in one of our stocks. If your rifle has a center to center hole
spread of 4.275 for the old short action, new center feed short action, whole spread is 4.410 or 5.062 for
the long action our stock will work. Some of the Savage 110 long action rifles come in short action
calibers like 223 or 308 so you can’t assume you have a short action based on the caliber. If you have a
model 110,111, 1112, 114 or 116 your rifle is a long action if you have a model 10, 11, 12, or 16 your
rifle is a short action. Our Varmint, and Sniper stocks will not fit rifles with detachable magazines.
Q. “Do you make wood or custom stocks?”
Q. “Will my Savage rifle fit in to one of your stocks?”
Q. “Will my Savage in 7mm STW or 300 Ult Mag work in your stock?”
A.
Yes, but there will have to be .200 of an inch removed from the back of the magazine box. This will not
cause any structural problems with the stock. Our stocks work very well under the higher stress of the
larger calibers.
Q. “Does the Sniper, Tactical or Varmint stock come with a bipod? What kind of bipod do you
recommend?”
A.
No, we do not supply a bipod with the stock. We recommend Harris bipods for use on our bipod adapter.
27

Similar documents

×

Report this document