RECIP-TRAP 9260 A comprehensive asset management tool for reciprocating and rotating plant machinery.

Document technical information

Format pdf
Size 117.4 kB
First found Jun 9, 2017

Document content analysis

Language
English
Type
not defined
Concepts
no text concepts found

Persons

Organizations

Places

Transcript

RECIP-TRAP 9260
®
Portable Analyzer
A comprehensive asset management tool for reciprocating and
rotating plant machinery.
The RECIP-TRAP 9260 system includes a multi-channel
analyzer and the RTwin 9.2 software suite. This allows you to
collect and analyze technical and economic measure of
performance and mechanical condition in order to make asset
management decisions that will increase your profitability and
mitigate risk.
RTwin 9.2
This system couples the durability, reliability and precision of the
RECIP-TRAP 9260 analyzer with our RTwin 9.2 software suite,
long recognized as the world's leading reciprocating machinery
diagnostic software.
RECIP-TRAP 9260
This portable, rugged, 4-channel device comes complete with
the accessories, transducers, cables and software needed to
analyze and evaluate the mechanical condition and
performance of power cylinders, compressors, and auxiliary
equipment. The RECIP-TRAP 9260 weighs just 7.3 lbs., is
EMI/RFI resistant, and has been re-designed to include a
sunlight visible VGA screen.
Through the use of accelerometers, ultrasonic sensors, the
patented water-cooled Aqua-Probe, and an IR temperature
wand; the RECIP-TRAP 9260 simultaneously measures,
displays and stores data in real time. Once stored, the data
can be viewed in whatever level of detail you need while still
on the machine. Allowing you to verify data integrity and
ensure all anomalous events have been captured.
RTwin 9.2 provides benchmarks for your operation and highlights
areas for potential improvement through extensive data comparisons and statistical analysis such as:
• Cycle-to-cycle pressure variations
• Statistical analysis of ignition secondary and power cylinder
•
•
•
•
•
peak firing pressure (ECR)
Cylinder-to-cylinder variations in vibration and pressure
Current-to-baseline comparisons of pressure, vibration,
ultrasonic and spectra
Theoretical-to-actual comparisons of compressor pressure
vs .time and pressure volume
Population based comparisons
Spectrum analysis: snapshot explorer, fault-finder, cascade
spectrum, and statistical process control (SPC)
DYNALCO
strategic asset management solutions
KEY MEASURES
Phased static (DC) pressure: from a patented, watercooled
AQUA-PROBE. Available in pressure standard ranges: –14.7
to +5000 psi (–1.0 to +345 bar) or –14.7 to +1250 psi (–1.0
to +86.2 bar); custom pressure ranges are also available.
Phased vibration: low (1 Hz to 8 kHz), standard (5.6 to 44
kHz), mid (180 Hz to 8 kHz) high (15.6 kHz to 44 kHz).
Phased ultrasonics: 36 kHz to 44 kHz.
Infrared skin temperature: –20°F to 2400° (–29°C to
+1316°C).
12 push buttons: power, start, menu, scale, zoom, testpoint, testpoint group, forward, backward, escape and two
trap buttons.
Ports: 4 data input ports; 1 multi–purpose port accepts
input from marker, charger, communication, and IR
temperature; and 1 BNC–out port for output to timing light.
BETA-LINK receiver: receives marker signal from BETALINK transmitter.
Communication: up to 115k baud data transfer.
Phased ignition primaries: primary AC (–10 to +10 V) or
DC (–10 to +10 V) waveform analysis.
Phased ignition secondaries: ignition timing and level
statistics (based on 100 cycles) and waveform analysis.
Rod motion (optional): input from proximity probes
(200 mV/mil) produces phased rod position waveforms.
Phased conventional vibration: displacement (0 to 100
mil), velocity (0 to 8.00 ips), and acceleration (0 to 50 g).
Conventional vibration: time- and frequency-based
(3 Hz to 20 kHz) true peak, RMS, pseudo-peak, displacement, velocity and acceleration. Rolling element bearing
defect energy acceleration (5 to 45 kHz).
Speed indicators: magnetic, hall effect, or optical speed
sensors.
Position indicators/transmitter: once/degree shaft
encoder or once/turn magnetic speed sensors for timing
information. BETA-LINK wireless angular position transmitter and receiver system.
Marker Accessories: Once-per-degree shaft encoder kit,
once-per-turn magnetic pickup, BETA-LINK transmitter,
BETA-LINK charger, magnetic pickup cable, TM5D trigger
module, timing light, 75-foot (23 m) marker cable.
Pressure Accessories: 2 ea. DC AQUA-PROBE pressure
transducers and cables. 5 and 12 foot (1.5 and 3.6 m)
quick-connect Fisher™ connectors. (CR Model comes with
only 1 ea. DC AQUA-PROBE).
Vibration Accessories: standard accelerometer, 2 magnet
mounts, probe tip, Channellock® pliers. Variable gain ultrasonic microphone. 5 and 8 foot (1.5 and 2.4 m) quick-connect Fisher™ connectors. Optional triaxial accelerometer
cable allows 3 simultaneous vibration readings from a
single input.
Ignition Accessories: Attenuator, ignition primary pickup
cable, ignition secondary pickup cable.
IR Temperature Wand: records skin temperature in the
range -20°F to +2400°F (-29°C to +1316°C).
Process and gauge readings: in any engineering units.
Analysts notes: up to 200 notes for recording observations
during data collection.
Battery: Two Li-ion batteries and charging system. Also
included: wrenches, carrying case, user manual. Single
CPU RTwin software license.
SPECIFICATIONS
MODELS AVAILABLE
Length: 10.5 in. (267 mm)
1-Year
Warranty
Width: 9.25 in. (235 mm)
Height: 3.25 in. (83 mm) graphics display down; 9.5 in.
(241 mm) graphics display up
Weight: 7.3 lbs (3.2 kg) without accessories
Operating temperature: 0°F to +120°F (–18°C to +49°C)
Housing: shock-resistant, light-weight, EMI/RFI resistant
Graphics screen: 256 color, high resolution,
800 x 600 VGA, sunlight viewable, EMI/RFI resistant
RECIP-TRAP 9260/CR, RECIP-TRAP 9260/CR-CSA: for
analysis of compressors and rotating machines. CSA model available for C1D2, Group A, B, C and D applications.
RECIP-TRAP 9260/ECR, RECIP-TRAP 9260/ECR-CSA: for
analysis of engines, compressors and rotating machines.CSA
model available for C1D2, Group A, B, C and D applications.
RECIP-TRAP 9260/DR: for analysis of diesel engines, and rotating machines.
RECIP-TRAP 9260/CR does not come with Encoder Kit. May
be purchased separately.
Front panel display: 80-character, backlit, EMI/RFI
resistant.
RECIP-TRAP, AQUA-PROBE, BETA-LINK, AND RTwin ARE TRADEMARKS OF DYNALCO CONTROLS.
DYNALCO CONTROLS RESERVES THE RIGHT TO CHANGE THESE SPECIFICATIONS WITHOUT
NOTICE. FOR COMPLETE SPECIFICATION INFORMATION, CONTACT A DYNALCO REPRESENTATIVE.
product_ngbrochure_rt9260
PH 832.251.8800 FAX 832.251.8801
Toll Free 800.950.2382 from U.S. and Canada
10528 Meadowglen Lane
Houston TX 77042 U.S.A.
www.dynalco.com

Similar documents

×

Report this document