LED AREA LIGHTS - AEROMAXTM MEDIUM (XAMU)

Document technical information

Format pdf
Size 178.6 kB
First found Nov 13, 2015

Document content analysis

Language
English
Type
not defined
Concepts
no text concepts found

Places

Transcript

LED AREA LIGHTS - AEROMAXTM MEDIUM (XAMU)
US patent 7828456, 7952293, 8002428 and CAN 2693131 & 2701653 and US & Int'l. patents pending
SMARTTEC™ - LSI drivers feature integral sensor which reduces drive current, when ambient
temperatures exceed rated temperature.
ENERGY SAVING CONTROL OPTIONS – DIM – 0-10 volt dimming enabled with controls by
others. BLS – Bi-level switching responds a 120-277V signal from separate controller or
sensor (by others). Low light level decreased to 30% maximum drive current.
OCCUPANCY SENSOR (IMS) - Optional internal passive infrared motion sensor activates
switching of luminaire light levels. High level light activated and increased to full bright
in 1-2 seconds upon detection of motion. Low light level (30% maximum drive current)
activated when target zone is absent of motion activity for ~ 2 minutes and ramps down
(10-15 sec.) to low level. Sensor located on the front of optical assembly. Sensor optic
has a detection cone of approximately 45°. Examples of detection - occurs 30’ out from a
30’ mounting height pole.
EXPECTED LIFE - Minimum 60,000 hours to 100,000 hours depending upon the ambient
temperature of the installation location. See LSI web site for specific guidance.
DOE LIGHTING FACTS
Department of Energy has verified representative product test
data and results in accordance with its Lighting Facts Program.
Visit www.lightingfacts.com for specific catalog strings.
LEDS - Select high-brightness LEDs in Cool White (5000K nominal) or Neutral White (4000K
nominal) color temperature. 70 CRI (nominal).
DISTRIBUTION/PERFORMANCE - Types 3, FT and 5. Exceptional uniformity creates bright
environment at lower light levels. Improved backlight cutoff minimizes light trespass.
HOUSING - One-piece, die-formed aluminum, weather-tight housing contains factory
prewired driver and field connections. Extruded one-piece EPDM gasketed wiring access
door (with safety lanyard) located underneath and utilizes tool-less thumbscrew fastener.
OPTICAL UNIT - Clear tempered flat glass lens sealed to aluminum optics housing creates
an IP67 rated, sealed optical unit (includes pressure-stabilizing breather). Optical unit is
recessed into housing cavity and sealed to the housing with extruded one-piece EPDM
gasket. Optical unit lanyard serves dual purposes of safety and provides positive ground
between unit and housing.
MOUNTING - Tapered rear design allows fixtures to be mounted in a quad pattern without
the need for extension arms. Use with 3” reduced drilling pattern on round and square
poles. A round pole plate (X4RPP, X5RPP) is required for mounting to round poles. Wall
mount available by ordering wall mounting bracket (BKS-XBO-WM-*-CLR). See Accessory
Ordering Information chart for all brackets.
Neutral Cool
White White
LIGHT OUTPUT - XAMU
SS
HO
SS
HO
# of
LEDS
Lumens (Nominal)
Type 3
Type FT
Type 5
128
128
128
128
13500
16500
12400
15000
14100
17300
13200
15800
12100
14800
11200
12500
Watts
(nominal)
139
176
139
176
LED Chips are frequently updated therefore values may increase.
ELECTRICAL - A terminal block for attachment of incoming primary wiring is supplied. Twostage surge protection (including separate surge protection built into electronic driver)
meets IEEE C62.41.2-2002, Location Category C. Available with universal voltage power
supply 120-277VAC (50/60Hz input), and 347-480 VAC. Optional twistlock photocell
receptacle is available. Photocell must be ordered separately.
DRIVER - Available in SS (Super Saver) and HO (High Output) drive currents (Drive currents
are factory programmed). Components are fully encased in potting material for IP65
moisture resistance. Driver complies with IEC and FCC standards. Driver and key electronic
components can easily be accessed.
OPERATING TEMPERATURE - -40°C to +50°C (-40°F to +122°F).
This product, or selected versions of this product, meet the standards
®
listed below. Please consult factory for your specific requirements. FINISH - Fixtures are finished with LSI’s DuraGrip polyester powder coat finishing process.
The DuraGrip finish withstands extreme weather changes without cracking or peeling.
ARRA
Funding Compliant
wet location
IP65
IP67
Fixtures comply with ANSI C136.31-2010 American National Standard for Roadway Lighting
Equipment - Luminaire Vibration 3G requirements.
WARRANTY - LSI LED fixtures carry a limited 5-year warranty.
PHOTOMETRICS - Please visit our web site at www.lsi-industries.com for detailed
photometric data.
SHIPPING WEIGHT (in carton) - 39 lbs. / 17.7 Kg
LISTING - ETL listed to U.S. and International safety standards. Suitable for wet locations. For
a list of the specific products in this series that are DLC listed, please consult the LED
Lighting section of our website or the Design Lights website at www.designlights.org.
11/13/14
Project Name
Catalog #
Fixture Type
© 2015
LSI INDUSTRIES INC.
LED AREA LIGHTS - AEROMAXTM MEDIUM (XAMU)
LUMINAIRE ORDERING INFORMATION
TYPICAL ORDER EXAMPLE:
Prefix
XAMU
Distribution
3 - Type III
5 - Type V
FT - Forward
Throw
XAMU FT LED 128 HO CW
Light
Source
# of
LEDs
LED
128
Drive
Current
Color
Temperature
Input Voltage
UE
WHT
Finish
PCR
Optional Controls
UE - Universal
SS - Super Saver CW - Cool White
Voltage
HO -High Ouput NW - Neutral White
(120-277)
BLK - Black
BRZ - Bronze
GPT - Graphite
MSV - Metallic Silver
347-480 - Universal PLP - Platinum Plus
Voltage
SVG - Satin Verde
(347-480V)
Green
WHT - White
Virtinet Wireless Network
(requires a Ventura controller/Malibu link)
(blank) - None
VCM - Standard (revenue grade)
VCMB - Basic
VCMH - Standard (Host)
VCMBH - Basic (Host)
DIM - 0-10 volt dimming
(required for satellite fixtures)
Optional Sensor/Options
Sensor
ES - External Sensor2
IMS - Integral Motion Sensor3
Options
PCR - Photoelectric Control
Receptacle4
Stand-Alone Control
(blank) - None
DIM - 0-10V Dimming
(from external signal)1
BLS - Bi-level Switching
(from external 120-277V signal)1
LUMINAIRE EPA CHART - XAMU
Single
ACCESSORY ORDERING INFORMATION
1.4
D180°
2.8
D90°
2.4
T90°
4.0
TN120°
4.0
Q90°
4.7
Description
Note: House Side Shield adds to fixture
EPA. Consult Factory.
(Accessories are field installed)
FOOTNOTES:
1- IMS, DIM and BLS cannot be ordered together.
2 - Do not specify for satellite units.
3- Not compatible with Virtinet wireless systems, DIM or BLS.
4- Photocell must be ordered separately. See Accessories.
Description
Order Number
BKA-XBO-EC-6-CLR 6" Extension Arm
382136CLR
BKS-XBO-WM-*-CLR Wall Mounting Bracket
382132CLR
XAMU-3/FT-HSS House Side Shield (Black only)
524670BLK5
X4RPP Round Pole Plate for 4" Poles
379967CLR
X5RPP Round Pole Plate for 5" Poles
379968CLR
PC120 Photocell for use with PCR option (120V)
1225146
PC208-277 Photocell for use with PCR option (208V, 240V, 277V) 1225156
PC347 Photocell for use with PCR option (347V)
1595166
PC480 Photocell for use with PCR option (480V)
12251806
FK120 Single Fusing (120V)
FK1207
FK277 Single Fusing (277V)
FK2777
Order Number
DFK208, 240 Double Fusing (208V, 240V)
DFK208, 2407
DFK480 Double Fusing (480V)
DFK4807
FK347 Single Fusing (347V)
FK3477
ROSB120 - WL Remote Box with 120V Occupancy Sensor
C/F8
ROSB277 - WL Remote Box with 277V Occupancy Sensor
C/F8
RPSB120 - Wet Location Remote Box with 120V External Photocell C/F8
RPSB208-277 - Wet Location Remote Box with 208-277V
External Photocell
C/F8
PMOS120 - 120V Pole-Mount Occupancy Sensor
518030CLR9
PMOS208/240 - 208V, 240V Pole-Mount Occupancy Sensor
C/F9
PMOS277 - 277V Pole-Mount Occupancy Sensor
518029CLR9
6 - Factory installed PCR option required.
7 - Fusing must be located in the hand hole of pole.
8 - Includes VCM. To be used in conjunction with VCM option in fixture. Consult factory.
9 - To be used in conjunction with any of the VCM control modules and ES sensor option in fixture. Consult factory.
DIMENSIONS (shown with VCM/VCMES option)
18-5/16"
(465 mm)
6-3/8"
(161 mm)
35-7/16"
(900 mm)
1-9/16"
(39 mm)
Side View
Front View
Bottom View
XAMU HSS - House Side Shield
5"
(127 mm)
12-3/4"
(324 mm)
Project Name
Catalog #
Fixture Type
11/13/14
© 2015
LSI INDUSTRIES INC.

Similar documents

×

Report this document