Technical data sheet Sensor FGL01363-1K Hn

Document technical information

Format pdf
Size 62.6 kB
First found Nov 13, 2015

Document content analysis

Category Also themed
Language
English
Type
not defined
Concepts
no text concepts found

Places

Transcript

Dr. E. Horn GmbH
Sensors - Monitoring - Systems
Im Vogelsang 1
71101 Schönaich, Germany
Dr. E. Horn GmbH . Postfach 1162 . 71094 Schönaich, Germany
HORN
Sensors - Monitoring - Systems
Technical data sheet Sensor FGL01363-1K Hn
Type:
Inductive sensor with amplifier Type FGL 01363-1K Hn
Wärtsilä article no.: PAAE075634
Description:
With this type of sensors objects like gear wheels, punched discs or integral
shafts made of steel can be sensed. They consist out of a coil with an
oscillator circuit and an amplifier. Changing the air gap between object and
sensor tip causes voltage changes in the coil/oscillator system which are
appraised. This measuring principle allows the operation at temperatures from
-25° up to 85°C.
Usage:
Attention!
Sensor tip should not touch detected measuring object.
Air gap must be adjusted and sensor has to be fixed with one or two nuts
(torque max. 15 Nm).Screen is connected to connector’s case at connector
version and to pick up housing at cable versions.
Do not disconnect cable or connector if pick-up is energized
Maintenance:
Sensors is maintenance free. Because of maintenance cycle the sensor
should be exchanged latest after 25 years in operation.
Supply voltage:
10 to 32V DC,
behaviour <10VDC:
undefined
behaviour >32VDC:
destroyed
Output current:
max. 180 mA
Output signal:
PNP
Polarity protection:
Yes
Short circuit protection: Yes
Function:
N.O.
Mounting:
Flush
Mounting distance
to gear:
depends on module, see diagram DIA00001 on drawing FGL0136L
Frequency range:
0Hz ... 1 kHz
Operating temperature: -25°C ... +85°C
Storage temperature: -41° ... +90°C; based on mean temperature of 50°C
Housing:
1.4305 (AISI 303)
Dimensions:
see drawing
Document:
rev.01; 18.3.2012
USt-IdNr. DE 145 165 420 . Steuer-Nr. 56457/30191 . Amtsgericht Stuttgart . HRB 240234 . Sitz der Gesellschaft: Schönaich .
Geschäftsführer:
Fon: +49 (0)7031 6302-0
Fax: +49 (0)7031 6302-99
eMail: [email protected]
Internet: www.dr-horn.org
Dr. Frank Michael Bernier
Jürgen Volberg
Vereinigte Volksbank AG
Kto.-Nr. 60 5183 007 (BLZ 603 900 00)
IBAN DE 59 6039 0000 0605 1830 07
BIC-CODE: GENODES 1 BBV
Postbank Stuttgart
Kto.-Nr. 13469-703 (BLZ 600 100 70)
IBAN DE 62 6001 0070 0013 4697 03
BIC-CODE: PBNK DEFF
×

Report this document